advertisement
SAFETY INFORMATION
GO TO VAP AMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
!
FAILURE TO FOLLOW SAFETY INFORMATION AND WARNINGS MAY
CAUSE PERMANENT DAMAGE AND VOID PRODUCT WARRANTY.
around water.
use only with a grounded outlet.
Vapamore in order to prevent a fire hazard.
Do not pull or drag steam cleaner using the
steam gun and hose.
Only use distiled water. Using hard water can cause calcium or mineral build up and void the warranty.
Never use additives such as perfumes, stain removers, or other chemicals in the water tank as they will void the warranty, cause permanent damage, and be dangerous.
storage.
Make sure the water tank cap is fully secured before use.
(See cleaning and storage).
Steam cleaner must be level and on the floor during use.
listed on the label.
Drain water tank prior to shipping, transporting.
supply cord.
Do not leave the steam cleaner on and unattended. Always switch the steam cleaner off and remove plug from wall outlet when unattended.
PARTS OVERVIEW
GO TO VAP AMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
6 7 8 9 10 11 12 13 14 15
5
16
PARTS LIST TECHNICAL SPECIFICATIONS
MR-75 Amico
Steam hose and connector
Accessory tool adapter
Measuring cup / funnel
Carrying case
Detail scraper
Nylon brush straight
Jet nozzle attachment
Nylon brush grout
Nylon brush medium
Nylon brush large
Metal brush small brass
Metal brush large brass
Metal brush large stainless steel
Clothes / fabric - Smooth surface squeegee
Cotton cover x 3
Model: MR-75 Amico
Power supply: 115 V - 60 Hz
Heating element: 1000 W - 10 A
Steam Pressure: 3 bar- 43.5 psi
Tank capacity: 200 ml - .21 qt
Heating time: 4 min.
Steam temp at tip: 99˚ C - 210˚ F
Power cord length: 10 ft
Gross weight: 1.58 kg - 3.5 lb
FILLING & OPERATION
GO TO VAP AMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
GENERAL FUNCTION: The MR-75 Amico steamer uses a heated boiler tank filled with water to create steam. When first plugged in you will see the red power light showing that the unit is powered on and heating. Once at full temperature the light will turn green showing the steamer is ready for use. This light will change back and forth from red to green during use as the heater cycles on and off. The steamer can be used anytime after the initial heating and when the light is cycling between colors. The steam pressure will fluctuate as the steamer is being used and the boiler cycles on and off during use.
!
or .
Using additives of any kind will void the warranty.
!
Only fill with distilled water. Using “hard” mineral heavy water will clog internal components and can cause failure to internal parts and void the warranty.
!
!
!
V apamo re
Fig.1
Fig.2
Fig.3
1
Push down and turn.
300ml / .32qt
!
NOTE:
Always make sure the steamer is not plugged in and is cool before filling with water.
steamer t o cool d o wn completely bef ore r em o ving wat er
5
If steamer is hot, all o w
Unscrew the tank cap by pressing the cap down and simultaneously turning counter clockwise. Fig. 1
Use the supplied measuring cup filled with distilled water to the 200ml MAX line. Fig. 2
R eplace the water tank cap by pressing down on the cap and simultaneously turning it clockwise. Make sure the cap is fully tight to prevent any steam from leaking out.
and once cooled down tighten cap further.
Red light when plugged in.
Green light when ready for use.
Plug in the steamer to a grounded 110 outlet. The steamer is ready for use. (Initial start up from cold machine is aprox.
4 min) *The status light will cycle red to green during use as the boiler maintains the temperature. Fig. 3
STEAM CLEANER ASSEMBLY
GO TO VAP AMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
Fig. 4
!
Carrying case for MR-75 and all accessories.
3
Fig. 5
2
Accessories twist lock onto the adapter.
Fig. 6
1
Accessory adapter twist to lock.
Fig. 7
Fig. 8
1
2
The MR-75 Amico has a full line of accessories that include the accessory tool adapter, jet nozzle attachment, clothes / fabric - smooth surface squeegee, detail scraper, steam hose and connector, carrying case and a full line of brushes.
The carrying case can be used to store and transport the MR-75 Amico and all the accessories and tools.
Fig. 4
The accessory tool adaptor is required when using all accessories. Attach by aligning the arrow on the accessory with the arrow on the accessory tool adapter and twisting to lock in place. Fig. 5
The MR-75 Amico can be used with or without the steam hose.
For use without the steam hose, connect the accessory tool adapter directly to the MR-75
Amico by twisting to lock in place. All accessories can then be used with the accessory adapter. Fig. 6
For use with the steam hose, connect the steam hose directly to the MR-75 Amico by twisting to lock in place. There is a locking tab that will click to lock. To remove the steam hose, slide the locking tab and twist to remove. Fig. 7
Connect the accessory tool adapter to the steam hose by twisting to lock in place. All accessories can then be used with the accessory adapter. Fig. 8
Fig. 9
1
2
7
Accessory adapter twist to lock.
Push to release steam.
!
Once the MR-75 Amico is ready for use, depress the steam trigger located on the top of the machine to release steam. Fig. 9
OPERATION
GO TO VAP AMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
Fig. 10
90 Deg. jet nozzle Tool adaptor
Fig. 11
The accessory tool adaptor can also be used on its own as a straight jet nozzle tool or along with the 90 degree jet nozzle attachment. These tools are great for removing soap scum in the bath, shower and around faucets. Also for cleaning tight areas such as toilet hinges where high pressure steam can reach and blow out dirt and debris.
surface being treated. The steam temperature will condense and cool within 1’’ of the jet tip. Fig. 10
Fig. 12
Fig. 13
Fig. 14
Suggested uses (Metal brush), oven grills, BBQ grates, cement stains, machinery, and metal surfaces. (Nylon medium duty and large nylon brush), used for more sensitive materials such as blinds, carpet, furniture, air brush is used for harder less sensitive areas such as
Fig . 11 - 12
IMPORTANT : With all brushes it is important to not apply excessive pressure or force. This can cause failure of the detail adaptor or related parts. When using the brushes let the steam do the work and the brush to help agitate the stain or area being cleaned.
The scraper tool can be used to defrost freezers, on oven walls and cook top surfaces to remove stuck on food. This tool is also good for removing wall paper, paint and shelve paper along with removing gum from hard flooring. Fig. 13
Sanitiz e - counter tops, tile, stone, granite, glass, stainless steel, walls, etc.
U sing the clothes - fabr ic / smooth surface tool without the cotton cover acts as a squeegee and is great for sanitizing kitchen and bathroom counter tops chemical free along with smooth surfaces such as stone, granite, wood, glass, tile and stainless steel. Fig. 14
OPERATION
GO TO VAPAMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
Fig . 15 A CCESSORIES / CLO THES - F TOOL
9
Start by installing the supplied cotton cover on the clothes - fabr ic / smooth surface tool. This tool can be used for steaming and sanitizing along with eliminating odors in garments, fabrics, furniture, curtains, drapes, etc.
Fig . 15
BEDBUG - DUST MITES - ALLERGENS
The Vapamor e MR-75 Amico pr oduces steam with an output temperature between 200˚ to 210˚ deg rees. Pests such as bedbugs, dust mites and other allergens along with their eggs are killed on contact at a temperature of 180˚ deg rees. Using steam is an extremely other bacteria or viruses without leaving any harmful chemical residue behind. The tools supplied with the Vapamor e MR-75 Amico allo w you to treat all areas where these pests
13 11 can hide such as bedding, sofas, furniture, pillows, carpet, cracks and crevices that are ideal hiding places for pests.
CLO THES - F TOOL
The clothes / fabric tool with the cotton cover is ideal for treating bedding, furniture, pillows, and carpet areas around bed posts and base boards. Start by installing the supplied cotton cov er on the clothes - fabr ic / smooth surface tool . A pply light consistent pressure and slowly pass it along the surface (1” per second) to insure the area being treated has a chance to come to full temperature killing pests and their eggs. Fig . 15
Fig. 16
Tool adaptor
90 Deg. jet nozzle
The tool adaptor can also be used on its own as a straight jet nozzle tool or along with the 90 degree jet nozzle attachment. These tools are great for cracks and crevices. Make sure to concentrate the steam directly on the area to be treated with as minimal distance as possible, no more than 1’’ away. The steam will condense eggs if the jet tip is not directly on the surface being treated. The detail adaptor can be attached directly to the steam gun or to any of the extension tubes. Fig. 16
NOTE: Replacement accessories and parts are available to order online
at vapamore.com or by calling Vapamore a
t 480-951-8900.
REFILL / CLEANING / STORAGE
GO TO VAP AMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
The tank must be filled up when the steam flow emitted starts to decrease. Turn off the MR-75 Amico by unpluging from the wall outlet. The red operation pilot light will be off. Allow the unit to cool down for at least 15 minutes. Press the steam trigger to release any remaining steam pressure. Open the tank cap by pressing down and turning counter - clockwise.
!
WARNING: Hot steam may escape when opening the cap if the machine is not
Add water using the measuring cup / funnel then carefully close the tank cap again by pressing down and turning clockwise untill fully tight. The MR-75 Amico can now be plugged in. The unit is ready for use as soon as the red pilot light turns to green.
CLEANING / MAINTENANCE
Always ensure before cleaning or maintaining the Vapamor e MR-75 Amico tha t it is unplugged from the wall outlet. Only clean the outer surface with a slightly, water moistened cloth. Do not use any cleaning agents, abrasives or alcohol
Lubricate the threads on the water tank cap with light oil or lubricating spray such as
R WD -40 onc e every 3 months or when needed.
The included small cotton covers can be machine washed using normal detergents
and wash cycle.
STORAGE
IMPORTANT : When storing the MR-75 Amico, unplug from the wall outlet and let the unit cool down. After the unit has cooled, hold the steam trigger down to release any steam pressure remaining.
Fig . 17
The tank should be emptied before storing for any extended per iod of time (30 da ys or more). To empty the tank, make sure the MR-75 is completely cooled upside down to drain any remaining water from the is completely dry. Fig . 17
TROUBLESHOOTING
GO TO VAP AMORE.COM TO SEE THE MR-75 AMICO INSTRUCTIONAL VIDEO
PROBLEM?
What do I do if the machine or an accessory becomes damaged or broken?
Visit www.vapamore.com for a complete list of parts and accessories available for purchase or simply call us a t 480-951-8900 or E-mail us a t [email protected] to purchase replacement parts or schedule a repair. WE ARE HERE TO HELP...
IMPORTANT : Do not return to the place of purchase for warranty or repairs. Only
Vapamore is authorized to facilitate all repairs to keep the highest quality and ETL standards. Repairs or tampering by any other party will void the Warranty.
TROUBLESHOOTING
One of the ETL protection devices has been triggered or the power cord has been damaged.
Call us a t 480-951-8900 or E-mail us a t [email protected] to schedule a repair.
The water tank is low or empty.
Refill the water tank.
The tank could have a build up of lime scale due to the use of hard water.
The tank must be de scaled by using a chemical de scaler . All chemicals must be removed from the water tank before the machine is operated. An ything other than 100% pure water inside the tank during operation could cause permanent failure of damage and can be very unsafe to operate.
Lifetime Limited Warranty for the
Vapamore MR-75 Amico Steam Cleaner
Coverage:
1: Lifetime parts and labor on the boiler, heating element and all internal electronics.
The Vapamore MR-75 Amico Steam Cleaner boiler tank, heating element and all internal electronic parts are lifetime warranted to be free from defects in material and workmanship when utilized for normal household use by the original purchaser only.
2: One (1) year parts and labor on accessories and housing.
The Vapamore MR-75 Amico Steam Cleaner accessories and housing are warranted to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use by the original purchaser only. This does not include replacement of items due to wear including but not limited to the Nylon Brush, Grout Brush, Metal Brush,
Jet tip, Clothes Steamer Cotton Cover, Scraper.
For this warranty to apply the original purchaser must return the warranty registration form (included in the original packaging or available online at vapamore.com) along with a copy of the original purchase receipt to Vapamore 7464 East Tierra Buena Ln Suite 108 – Scottsdale, AZ 85260 within 15 days after the original purchase date.
Should any defect covered by the terms of this lifetime limited warranty be discovered, Vapamore will repair or replace any defective part provided the unit is returned by the original purchaser on file with the warranty form information.
The liability under this warranty is limited solely to the cost of the replacement parts or the complete unit at the discretion of Vapamore. This warranty is void if damage is resulting from accident, misuse, improper operation, unauthorized repair or alteration, tampering, substance other than distilled water used in the boiler tank, commercial or other than home use, or damages accruing in transit. This warranty does not cover any shipping fees to or from our facility.
This warranty is extended to the original purchaser only and excludes all other legal and / or conventional warranties. The responsibility of Vapamore, if any is limited to the specific obligations expressly assumed by it under the terms of the lifetime limited warranty. In no event is Vapamore liable for incidental or consequential damages of any kind whatsoever.
Customer is responsible for all shipping fees to and from our facility. Carefully pack returning items for repair to avoid damage in transit. Be sure to include in the box all your contact information including name, phone number, email address and shipping address along with a prepaid return ship tag from
UPS or FedEx. Vapamore does not ship and will not accept items sent via USPS. Contact Vapamore at 480-951-8900 or email [email protected] for making arrangements to return items for repair or service. Vapamore is not responsible for any shipping cost to or from our facility.
Vapamore
R
advertisement
Related manuals
advertisement