C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20140510-E6294
Report Reference E6294-19870702
Issue Date 2014-MAY-10
Issued to: SCHNEIDER ELECTRIC USA INC / SQUARE D CO
1010 AIRPARK CENTER DR
NASHVILLE TN 37217
This is to certify that COMPONENT - PANELBOARD AND SWITCHBOARD representative samples of ACCESSORIES
See Addendum Page
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL67 Standard For Panelboards
Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information
Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s
Recognized Component Mark: , may be used in conjunction with the required Recognized Marks.
The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.
Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC.
Look for the UL Recognized Component Mark on the product.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 2
C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number 20140510-E6294
Report Reference E6294-19870702
Issue Date 2014-MAY-10
This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.
R/C Grounding bar kits, Cat. Nos. PK3GTA-1, PK4GTA, PK5GTA, PK7GTA, PK9GTA, PK9GTA-1, -FT,
PK12GTA, PK15GTA, -FT, PK15GTAL, PK15GTA-6, PK18GTA, PK18GTAL, PK19GTA, PK23GTA,
PK23GTAL, PK27GTA, PK32DGTA, PK0GTA-6, PK0GTA-2, PK0GTC-1, PK0GTC-2, DT-30SG, -
100SG, PK-GTAB, PK0GTA-3 PK0GTA-4 and PK0GTJ250
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus
Page 2 of 2