Catalog

Number

Notes

FEATURES & SPECIFICATIONS

INTENDED USE

Unique design combines an energy-efficient LED exit sign with an integrated LED emergency light bar, into one low-profile unit.

Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for suitable uses .

CONSTRUCTION

Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components for easy installation. Universal J-box pattern. Universal chevrons are easily removed for directional indication.

Fully assembled single face with extra faceplate for easy field-conversion to double face. Integrated LED emergency light bar swivels to allow for full range of light adjustment.

Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating, based on UL924 standards.

OPTICS

White LEDs are in series providing redundant light sources to ensure emergency lighting performance. The typical life of the exit LED lamp is 10 years. 1.5W per face.

ELECTRICAL

Dual-voltage input 120V or 277V AC; 9.6V output. Emergency combo provided with test switch, status indicator and rechargeable battery. Maintenance-free nickel cadmium high-output battery standard provides 90 minutes of emergency power and provides up to 3W of LED remote capacity.

INSTALLATION

Universal mounting canopy for top or end mount (canopy included). Back mount standard for single face only.

LISTINGS

UL Listed. Meets UL 924, NFPA 101 (current Life Safety Code), NFPA 70-NEC and OSHA illumination standards.

Indoor damp location 10°C to 40°C (50°F to 104°F) listed standard. Meets all applicable FCC Title 47, Part

15, Subpart B requirements.

WARRANTY

2-year limited warranty. (Battery is prorated.) Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

NOTE : Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25°C.

Specifications subject to change without notice.

Type

Integrated Exit/Unit

ECBG LED

Combos

Integrated Exit-Unit Combo

ECBR LED

12-5/8"

(32.1)

5-1/2"

(13.97)

All dimensions are inches (centimeters).

9-1/8"

(23.18)

8-1/4"

(20.95)

†

4-3/8"

(11.1)

† Exit Signs Certified in the CA Title 20 Appliance Efficiency Database.

1-7/8”

(4.8)

ORDERING INFORMATION

Catalog

Number

ECBR LED M6

ECBG LED M6

UPC

784231874912

784231874943

Description

Red, integrated LED light bar

Green, integrated LED light bar

LED Unit

Standard

Supply Input Pallet Carton

Voltage Wattage Qty. Qty.

120/277 2.32 360 6

120/277 2.32 360 6

5-3/8 (13.7)

15 (38.1)

12 (30.5)

3-3/4

(9.5)

3-3/4

(9.5)

2

(5.1)

Accessories: Order as separate catalog number.

ELA WG1

ERE W SGL SQ M12

ERE W T SQ M12

ERE GY SGL WP SQ M12

ERE GY T WP SQ M12

Back mount wireguard 1

Single, LED indoor remote head, square, ivory white, .75W, 3.6V-12V voltage sensing

Twin, LED indoor remote head, square, ivory white, 1.5W, 3.6V-12V voltage sensing

Single, LED weather-proof remote head, square, gray, 1W, 3.6V-12V voltage sensing

Twin, LED weather-proof remote head, square, gray, 2W, 3.6V-12V voltage sensing 2

2

2

2

LED Combo

9”

(22.9)

20”

(50.8)

Notes

1 See spec sheet ELA-WG .

2 See spec sheet ERE .

8”

(20.3)

4-1/2”

(11.4)

12”

(30.5)

EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800-705-SERV (7378) Email: [email protected] www.lithonia.com © 2011-2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/22/21

LED Exit

1 5/8 ”

7

3/16 ”

11

5/8 ”