Unbranded 3502-CYL-B-EX Dia Single-Handle 1-Spray Tub and Shower Faucet Specification

Location:

Dia

®

3502-CYL-B-EX

Tub/Shower/Hand Shower System

Specification Submittal

Specification

Tub/shower/hand shower system powered by the

Temptrol ® Pressure Balancing valve includes adjustable stop screw to limit handle turn, lever handles, adjustable slide mechanism, diverter for toggling between fixtures, exposed shower column/slide bar, 7" diverter tub spout, hand shower bracket, 60" flexible metal hose with single check valve, 1 mode hand shower with single check valve, 1 mode showerhead and 2.5 gpm (9.5 L/min) flow restrictors. Components made from metal and nonmetallic construction, plated in standard polished chrome finish.

Model Numbers

 3502-CYL-B-EX

Dia tub/shower/hand shower system

 3502-CYL-B-EX-TRM

Dia tub/shower/hand shower, trim only

 46-2-BODY

Temptrol Pressure Balancing tub/shower valve body

 46-2X-BODY

Temptrol Pressure Balancing tub/shower valve body with stops

Finish Options

 -STN

Satin Nickel finish

Compliance

-ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete warranty information.

Modifications

☐

☐

CG -1.5 1.5 gpm (5.7 L/min) flow restrictor

-2.0 2.0 gpm (7.6 L/min) flow restrictor

☐ - 352SH-3 Dia ® 3" diameter, 3 mode showerhead

☐ -361SH Duro ® 4" square, 1 mode showerhead

☐ - 361SH-6 Duro

☐ -362SH Duro

® 6" square, 1 mode showerhead

® 3" diameter, 1 mode showerhead

☐ - 4-161 Symmons

☐ - 4-166 Lucetta

® 9" diameter rain showerhead

® 6" diameter rain showerhead

® 12" diameter rain showerhead ☐ - 402SH1 Symmons

☐ - 402SH2 Degas ® 7-1/2" diameter, 3 mode showerhead

☐ - 422SH Oxford

☐ - 432SH Sereno

® 6-1/2" square, 1 mode showerhead

® 7-1/2" diameter, 1 mode showerhead

☐ - 512SH Winslet

☐ - 532SH Museo

® 5-3/4" diameter, 1 mode showerhead

® 5-3/4" diameter, 1 mode showerhead

-72 72" hose in place of 60" hose

☐ -ADACHS ADA hand shower wand (chrome)

☐ -ADAHS ADA hand shower wand (white)

☐ Delete

Suffix B

Chrome plastic escutcheon on valve with color graphics/indicators in place of standard brass

☐

☐

-IPS 1/2" female IPS connections

-LP Loop handle

☐ -LR Lever handle

☐

☐

☐

☐ -L/HD Less showerhead

☐ -L/HS Less hand shower

-QD Quick-disconnect on hand spray units

-R 72" white vinyl hose in place of 60" metal hose

-REV Reverse coring, hot on right, cold on left, for back to back installations

☐

☐

☐

☐

-SS Slip spout on any tub/shower unit

- T2 Alternative 361DTS, square diverter tub spout

-VB Elevated vacuum breaker

-VP Vandal resistant escutcheon screws in place of standard screws

☐ -X Integral service stops - allows water shutoff at valve for service

☐ -X-CHKS Integral check stops - for use in installations where a positive shut-off device is used downstream of mixing valve

Note: Append appropriate -suffix to model number.

Dimensions

FF

II

LL

JJ

C D

EE

Notes:

1) All dimensions measured from nominal rough-in (see K as reference).

2) Dimensions subject to change without notice.

TT

Important: If the distance for item D is less than 29" (737 mm),

Exposed Shower Riser is not appropriate for your application.

H

I

J

E

F

G

K

S

T

U

P

Q

R

M

N

O

A

B

C

D

L

Measurements

Male 1/2" NPT thread must protrude 1/2" (13 mm) from finished wall

Ø 3", 76 mm

22", 559 mm

For Shower Systems:

Min. 29", 737 mm from centerline of shower output to valve

For Tub/Shower Systems:

Min. 29", 737 mm from centerline of shower output to valve

27-1/2", 699 mm

2-3/16", 55 mm

5-1/16", 128 mm

17-15/16", 456 mm

3-1/2", 89 mm

3", 76 mm

Rough-in

2-3/8" ± 1/2", 60 mm ± 13 mm

Male 1/2"-14 NPT fitting must protrude 5-1/2" (140 mm) from finished wall

Ref. 12", 305 mm

Ref. 32", 813 mm

Ref. 77", 1956 mm

4", 102 mm

Ø 13/16", 21 mm

Ø 2-3/16", 56 mm

Hole Size

Ø 5/16", 8 mm

Ø 7-1/2", 191 mm

2-1/2", 64 mm

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621

Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-1649 REV A ■ 013017