HIT Welding 802030 80 Amp 120-Volt TIG / Stick Welder Specification
Add to My manuals1 Pages
HIT Welding 802030: Your Versatile Welding Companion
The HIT Welding 802030 is a DC inverter stick welder designed for both indoor and outdoor welding projects. It offers smooth stick welding performance and the ability to perform lift start DC TIG welding on steel and stainless steel materials with the optional TIG Torch (requires Argon shielding gas, regulator, gas hose, and TIG filler rod). The removable quick connect weld cables ensure easy setup and polarity changes. Weld mild steel and alloys with electrodes up to 3/32" on materials up to 1/8" thick.
advertisement
![HIT Welding 802030 80 Amp 120-Volt TIG / Stick Welder Specification | Manualzz HIT Welding 802030 80 Amp 120-Volt TIG / Stick Welder Specification | Manualzz](http://s1.manualzz.com/store/data/067295792_1-3781166f87abb60fde369c9da9622156-360x466.png)
The Stick Welder is a DC only inverter stick welder with a smooth stick welding performance. It is intended for use for welding steel, stainless steel, cast iron and hard surfacing using electrodes from 1/16 inch to 3/32 inch. This unit can also perform lift start DC TIG welding on steel and stainless steel materials with the optional TIG Torch. (Argon shielding gas along with a regulator, gas hose, and TIG filler rod would also be required for TIG welding.) The removable quick connect weld cables allow for easy connection, tear down, and polarity changes. It is designed to weld mild steel and alloys with electrodes up to 3/32" on materials up to 1/8" thick.
Stick welding gives the operator the flexibility to use this welder for mobile applications, including outdoor applications. Stick electrodes contain a flux, making welding easy and does not require the use of a separate shielding gas which can be blown away by the wind in outdoor applications. Since this welder does not use shielding gas, the operator will not require to have or maintain shielding gas bottles, a regulator or gas hose.
TIG welding does require the use of Argon shielding gas. The shielding gas replaces the flux that is used in stick welding, providing a more controlled and cosmetic weld. However, TIG welding is limited to areas inside or where wind can be controlled, preventing the shielding gas from blowing away.
Use on a 20 amp 115V AC circuit without the use of an extension cord. If an extension cord is necessary for your application, use the appropriate size and length of extension cord to handle 20 amps the entire length of the extension. Talk with a qualified electrician for cord size recommendations.
TECHNICAL SPECIFICATIONS
PAGE 2
Item
Power Supply
No-Load Voltage
Output Range
Duty Cycle
Suggested Electrode
Electrode Diameter
Dimensions
Weight
Description
76 Volts DC
120V, 25A, 60 HZ, Single Phase
20 - 80 Amp DC, 90 Amp DC Peak
20% @ 80A
E6013, E7014, E7018, Stainless Steel
1/16in, 5/64in, 3/32in
12" x 5" x 9"
9.9 lbs.
advertisement
Related manuals
advertisement