Simpli Home AXCRED72-HIC Redmond Solid Wood 72 in. Wide Transitional TV Media Stand installation Guide

SIMP HOME ®

LIFE BY DESIG N

REDMOND / MANSFIELD / STANWICK

72 INCH TV MEDIA STAND

MODEL # AXCRED72-HIC

TM

TM

1/24

SIMP HOME ®

LIFE BY DESIG N

TM

TM

Questions, problems, assembly help, missing parts?

No need to return the product, we will gladly help and ship your replacement parts free of charge

Please call Customer Service at 1-866-518-0120 ext. 262

Monday to Friday between 9 am –4 pm EST or go to

www.simpli-home.com/parts request

In order to assist you in a timely manner, please have the following information ready:

Model # _________________Part Number or Letter_____________________

Purchased at ____________Date of Purchase _________________________

If you wish to return the product, please contact the retailer where the product was purchased.

2/24

IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.

SAFETY INFORMATION

CAUTION : Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.

If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture.

Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required.

Hardware package may have spare parts.

WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly. To avoid danger of suffocation, always keep plastic bags away from children and pets.

We recommend that you assemble this unit on a carpeted floor to avoid scratches. If using power tools, set the tool to low torque to avoid damage.

May require 2 people for ease of assembly.

3/24

IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.

CARE and MAINTENANCE

Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions. As humidity changes, the components of wooden objects are continually pushing and pulling against each other. This pressure often results in parts of furniture no longer fitting together closely or becoming distorted or breaking from their own internal stresses.

The response to relative humidity changes begins with determining the annual average RH for your particular space. Then try to keep the RH in the space where your furniture is as close to that average as possible, generally within about 10% up or down. De-humidify in the summer and humidify in the winter.

Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating systems, which can drive down interior RH in the winter, almost invariably cause problems for furniture. To counteract their effect, you can either modify the RH by keeping furniture containing spaces cooler in the winter or most importantly, have a good working humidifier for your home. A humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor air can suck enough moisture from its surroundings to do permanent damage to wood, causing it to crack or split.

Remember, that not all woods are created equal. Two factors that help determine how rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard wood will dry less rapidly than pieces made from softer woods.

Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other finishes.

To help protect your wood furniture, take these steps:

· Use a humidifier, preferably one with an automatic control system that can sense the humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood

·

· by causing it to expand and contract.

Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.

If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4 inches away from the wall, giving the heat and air space to circulate.

·

·

·

·

·

Dust with soft dry cloth.

Do not use liquid or aerosol products.

To avoid marking, do not place rubber on surface (foot pads, etc.)

For soil build-up, wipe with damp cloth & dry.

Do not use abrasive cleaners.

4/24

PRE-ASSEMBLY INFORMATION

PART DESCRIPTION

A

L

A

R


B

C

Front /

Avant

LEFT SIDE

QTY 1

Front /

Avant

D

L

RIGHT SIDE

QTY 1

D

R

TOP

QTY 1

Front /

Avant

Front /

Avant

E

BOTTOM SHELF

QTY 1

Front /

Avant

Front /

Avant

F

LEFT LARGE DIVIDER

QTY 1

G

L

RIGHT LARGE DIVIDER

QTY 1

LARGE DOOR (L&R Same)

QTY 2

CABINET SHELF

QTY 2

LEFT BACK PANEL

QTY 1

NEED HELP? For help with assembly or if you are missing a part,

Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)

5/24


PART DESCRIPTION

G

R Warning Label

G1


G2

H

RIGHT BACK PANEL

QTY 1

I

TOP BACK PANEL

QTY 1

J

L

BOTTOM BACK PANEL

QTY 1

J

R

TOP SHELF

QTY 1

K

DRAWER FRONT

QTY 1

L

LEFT DRAWER SIDE

QTY 1

RIGHT DRAWER SIDE

QTY 1

DRAWER BACK

QTY 1

DRAWER BOTTOM

QTY 1



6/24


PART DESCRIPTION

M N


O

Front /

Avant

Front /

Avant

P

FLIP DOWN DOOR

QTY 1

Q

L

MIDDLE SHELF

QTY 1

Q

R

SMALL DIVIDER

QTY 1

Front /

Avant

R

SMALL DOOR (L&R Same)

QTY 2

LEFT MIDDLE DIVIDER

QTY 1

Front /

Avant

RIGHT MIDDLE DIVIDER

QTY 1

SUPPORT LEG

QTY 2



7/24


HARDWARE DESCRIPTION

1 2


3

4

ALLEN KEY SCREW

M6 X 30mm

QTY 52

5

ALLEN KEY

QTY 1

6

SHELF SUPPORT

QTY 12

7

PHILLIPS SCREW

M3 X 12mm

QTY 24

8

PHILLIPS SCREW

M3 X 15mm

QTY 20

9

PHILLIPS SCREW

ROUND HEAD

M4 X 15mm

QTY 31

MAGNET AND PLATE

QTY 5 SETS

HANDLE

M4 X 22mm

QTY 4 SETS

CAM LOCK PIN

CAM LOCK

QTY 10 SETS



8/24


HARDWARE DESCRIPTION

10 11


12

13

HANDLE

M4 X 10mm

QTY 2 SETS

14

PHILLIPS SCREW

M4 X 30mm

QTY 8

HINGE

QTY 2 SETS a. M4 X 25mm - QTY 2

( 1 is extra ) b. M4 X 15mm - QTY 1 c. M4 X 25mm - QTY 1

FURNITURE TIP OVER RESTRAINT

QTY 1 SET

PHILLIPS SCREW

M3.5 X 12mm

QTY 12

Required -

Flathead screwdriver

Phillips screwdriver

Not Included



9/24

COMPONENTS-KEY DIAGRAM MODEL # AXCRED72-HIC

N

M

E

Front /

Avant

A

L

G

R

F

D

L

Front /

Avant

P

Front /

Avant

Q

L

Front /

Avant

B

G1

G2

O

Front /

Avant

H

M

C

R

R

G

L

D

R

F

Front /

Avant

A

R

E

Front /

Avant

Q

R

P

J

L

K

L

J

R

I

10/24

ASSEMBLY

STEP-1


J

R

J

L

I

9

1. Attach four Cam Lock Pins 9 to back of Drawer Front I .

2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides JL , JR .

3. Insert two Cam Locks 9 into pre-drilled holes on each Drawer Side JL , JR .

4. Use flathead screwdriver to secure Cam Locks.

STEP-2

J

R

J

L

L

I

1. Slide Drawer Bottom L firmly into slots on Drawer Sides JL , JR

and Drawer Front I .

11/24

ASSEMBLY

STEP-3

2

1


J

L

K

L

J

R

1. Align Drawer Back K with Drawer Bottom L and press firmly into slot.

2. Attach Drawer Back K using two Allen Key Screws 1 through pre-drilled holes on

each Side JL , JR .

3. Use Allen Key 2 to tighten Screws. Do not over-tighten.

STEP-4

10 NOTE: The screwdriver is not included in the hardware pack.

I

1. Use phillips screwdriver to attach Handle 10 to Drawer Front I .

12/24

ASSEMBLY

STEP-5


1

2

Q

L

N

Q

R

1. Attach Middle Dividers QL , QR to Middle Shelf N using six Allen Key Screws 1

(three screws on each Middle Divider).

2. Use Allen Key 2 to tighten. Do not over-tighten.

STEP-6

9

H

Q

L

Q

R

1. Attach six Cam Lock Pins 9 to underneath of Top Shelf H .

2. Align Cam Lock Pins with pre-drilled holes and attach Middle Dividers QL , QR .

3. Insert three Cam Locks 9 into pre-drilled holes on each Middle Divider QL , QR .

4. Use flathead screwdriver to secure Cam Locks.

13/24

ASSEMBLY

STEP-7


H

D

L

D

R

1. Attach Large Dividers DL , DR to Top Shelf H using six Allen Key Screws 1

(three screws on each Divider).


1

2

14/24

ASSEMBLY

STEP-8


2

1

D

L

C

Q

L

H

O

Q

R

D

R

2

1

2

1

1. Attach Bottom Shelf C to Middle Dividers QL , QR and Large Dividers DL ,DR

using twelve Allen Key Screws 1 (three screws on each Divider).

2. Attach Small Divider O to Top Shelf H using three Allen Key Screws 1


15/24

ASSEMBLY

STEP-9

A

L


NOTE: The screwdriver is not included in the hardware pack.

R

C

R

1

2

A

11

1. Attach Sides AL , AR to Bottom Shelf C using six Allen Key Screws 1

(three Screws on each Side).


3. Attach Support Legs R to Bottom Shelf C using eight Phillips screws 11

(four Phillips screw on each Support Leg).

4. Use Phillip Screwdriver to snugly tighten screw.

R

16/24

ASSEMBLY

STEP-10


2

1

A

L

D

L

O

B

D

R

A

R

1

2

1. Attach Top B to Sides AL , AR , Small Divider O and Large Dividers DL , DR

using fifteen Allen Key Screws 1 (three screws on each Side, Divider).


STEP-11


6

G

L

G2

G1

B

Front /

Avant

G

R

Warning Label

Front /

Avant

1. Attach Back Panels GL , GR , G1 , G2 to back frame of TV using thirty one Phillips

Screws Round Head 6 into pre-drilled guide holes.

2. Use Phillips screwdriver to tighten screw. Do not over-tighten.

17/24

ASSEMBLY

STEP-12

12

13



5

7

Front /

Avant

Front /

Avant

Front /

Avant Front /

Avant

Q

L

M

Front /

Avant

N

Front /

Avant

Q

R

Front /

Avant

Front /

Avant

10

7

5

1. Attach Flip Down Door M to Middle Shelf N using two Hinges 13 and twelve

Phillips Screws 12 .

2. Attach Magnet Plates 7 to top corner of Middle Divider QL , QR using Phillips

Screws 5 into guide holes on Middle Divider QL , QR .

3. Attach Magnets 7 to Flip Down Door M using Phillips Screws 5 into guide holes

on Flip Down Door M .

4. Use a Phillips screwdriver to snugly tighten screw.

18/24

ASSEMBLY

STEP-13


4


Front /

Avant

E

A

L

P

D

L

D

R

Front /

Avant

A

R

P

E

8

1. Attach hinges on Large Doors E to Sides AL , AR using Phillips Screws 4

into guide holes.

2. Attach hinges on Small Doors P to Large Dividers DL , DR using Phillips

Screws 4 into guide holes.

3. Use a Phillips screwdriver to snugly tighten screw.

4. Use Phillips screwdriver to attach Handle 8 to Large Doors E and

Small Doors P .

19/24

ASSEMBLY

STEP-14



E

P

D

L

Q

L

7

5

5

Q

R

D

R

P

7

E

1. Attach Magnets Plates 7 to bottom corner of Large Doors E and

Small Doors P . using Phillips Screws 5 into guide holes on Large

Doors E and Small Doors P .

2. Attach Magnets 7 using Phillips Screws 5 into guide holes on Large

Dividers DL , DR and Middle Dividers QL , QR .

3. Use Phillips Screwdriver to snugly tighten screw.

20/24

ASSEMBLY

STEP-15

3


3

F

F

3

F

1. Use four Shelf Supports 3 for each Cabinet Shelf F in desired location.

2. Two Shelf Supports 3 may be used on back top of each Cabinet Shelf F as a

tipping restraint.

3. Insert assembled drawer into glides on assembled TV Media Stand.

21/24

FURNITURE TIP OVER RESTRAINT ASSEMBLY

WARNING

Serious or fatal crushing injuries can occur from furniture tip-over.

If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture.

STEP-16


14

14

22/24

FURNITURE TIP OVER RESTRAINT ASSEMBLY

Furniture Tip Over Restraint Instructions:

1.

Attach one of the mounting brackets securely to the back edge of

the furniture. Use the shorter screw.

P x

2.

Determine where furniture is to be placed and mark location on

the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture.

x P

3.

Drill a 3/16 inch hole in the wall. Press the plastic anchor into the

hole and gently tap until the flange on the anchor is against the

wall surface.

4.

Position the bracket over the anchor and use the longer screw to

securely attach the bracket to the wall.

5.

Place the furniture so the back edge is in line with the bracket on

the wall.

6.

Lace an end of the nylon zip-tie strap down through each bracket.

Bring both ends together and slide the smooth side upright

through the square-shaped end and pull through to create the

“locked” position.

7.

Check to make sure the strap is securely laced and locked to the

brackets.

x P

·

·

DO NOT

place heavy objects in top drawers

DO NOT

let children climb or hang on drawers, doors or shelves

23/24

SIMP HOME ®

LIFE BY DESIG N

TM

TM

WARRANTY

Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights.

In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext. 262 from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at [email protected].

We reserve the right to repair or replace the defective product, at its discretion.

This product is guaranteed for 12 months if used for normal purposes.

Any warranty is invalid if the product has been overloaded or subject to neglect, improper use or an attempted repair by other than an authorized agent. Heavy-duty or daily professional/commercial usage are not guaranteed.

Due to continuous product improvement, we reserve the right to change the product specifications without prior notice.

24/24

Simpli Home AXCRED72-HIC Redmond Solid Wood 72 in. Wide Transitional TV Media Stand installation Guide

REDMOND / MANSFIELD / STANWICK

72 INCH TV MEDIA STAND

MODEL # AXCRED72-HIC

Questions, problems, assembly help, missing parts?

www.simpli-home.com/parts request

May require 2 people for ease of assembly.

CARE and MAINTENANCE

Furniture Tip Over Restraint Instructions:

DO NOT

DO NOT

WARRANTY

Related manuals

Glitzhome

2000800008

Simpli Home

AXCBURTVS-72

Simpli Home

AXCRAMH72-HIC

Simpli Home

AXWSH010-HIC

Simpli Home

AXCCRL45-W

Simpli Home

AXCART17-TB

Simpli Home

AXCART17-HB

Simpli Home

AXCAMH09-BL

Simpli Home

3AXCDRP-13-TK

Universal Furniture

Brownstone Delancy Credenza 553779

Universal Furniture

Sojourn Entertainment Console 543A966

Simpli Home

AXCRED72-GR