IDE40V.A1, IDE40 VD1/2, IDE44V.B1, IDE40V.E0 CF to IDE converter User's Manual

CF to IDE User's Manual

Description :

Compact-Flash (CF) card is an electronic solid-state-disk(SSD) with IDE interface. It is a small card with mass space. We have developed CF to IDE converter for your convenience. You can read CF card on IDE port.

CF card is low cost. It is widely used in notebook, PDA, portable instrument, or other industrial device. In electronic factory, people use CF card as hard-disk driver (HDD) to store test program because frequent powering on/off damages mechanical HDD.

Characteristics :

●

●

●

●

●

●

●

In accordance with CF Spec V2 and IDE/ATA-33 spec.

Standard IDE Interface: true-IDE mode, support DMA-33 transfer mode.

Support CF-I and CF-II: also support IBM MicroDrive with CF-II interface.

DE 40pin/2.54mm or 44pin/2.0mm female or male connector. Plug card into IDE socket directly or connect to motherboard by a cable.

CF socket mounted flexible. Different CF socket can be mounted, single/double side selectable for double side type.

Master/Slave jumper. CF card on each side can be configured as Master or Slave.

Use CF as DOM. Supply auto select from IDE 40pin-20 or FDD power connector, or from IDE when use

IDE 44pin.

Master / Slave Jumper settings :

Jumper usually has a small white triangle beside pin – 1, or has a “1” beside pin – 1. Each jumper has a cap.

For double-side type (Jumper has 3 pins)

Cap on Pin 1-2 Cap on Pin 2-3 front/back Master / Slave Slave / Master

For single-side type (Jumper has 2 pins)

Close Open

CF mode Master Slave

Product model list :

Model

CF-IDE40V.A1

CF-IDE40 VD1/2

CF-IDE44V.B1

CF-IDE40V.E0

IDE pins

Gender

40 Male/Female

40 Male

44 Male/Female

10 Female

Number of

CF slots

2

1

1

2

Jumper PINs Vcc from pin20

3 Yes

2

2

3

No

No

Yes

DMA support

Yes

Yes

Yes

Yes

Iron track

No

LEDs

Active

Yes

No

Active

Active

No Active/Power/Detect