Asus P8Z77-V LK Computer Hardware User manual

PDF
Document
Advertentie
Motherboard
P8Z77-V LK
E7242
First Edition (V1)
March 2012
Copyright &copy; 2012 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product may contain copyrighted software that is licensed under the General Public License (“GPL”)
and under the Lesser General Public License Version (“LGPL”). The GPL and LGPL licensed code in this
product is distributed without any warranty. Copies of these licenses are included in this product.
You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software,
and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable “work that uses the Library”) for a period of three years after our last shipment of the product
including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either
(1) for free by downloading it from http://support.asus.com/download;
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source code
we would be much obliged if you give us a notification to the email address [email protected], stating the
product and describing the problem (please do NOT send large attachments such as source code archives
etc to this email address).
ii
Contents
Safety information....................................................................................................... vi
About this guide......................................................................................................... vii
P8Z77-V LK specifications summary........................................................................ ix
Chapter 1:
Product introduction
1.1
Welcome!..................................................................................................... 1-1
1.2
Package contents....................................................................................... 1-1
1.3
Special features.......................................................................................... 1-2
1.3.1
ASUS DIGI+ VRM Digital Power Design .................................... 1-4
1.3.3
ASUS Exclusive Features............................................................ 1-4
1.3.4 ASUS Quiet Thermal Solutions.................................................... 1-6
1.3.5
ASUS EZ DIY............................................................................... 1-6
1.3.6
Other special features.................................................................. 1-7
Chapter 2:
2.1
2.2
2.3
Product highlights........................................................................ 1-2
1.3.2
Hardware information
Before you proceed.................................................................................... 2-1
Motherboard overview................................................................................ 2-2
2.2.1
Motherboard layout...................................................................... 2-2
2.2.2
Central Processing Unit (CPU).................................................... 2-4
2.2.3
System memory........................................................................... 2-5
2.2.4
Expansion slots.......................................................................... 2-13
2.2.5
Jumper....................................................................................... 2-15
2.2.6
Onboard switches...................................................................... 2-16
2.2.7
Onboard LEDs........................................................................... 2-18
2.2.8
Internal connectors.................................................................... 2-20
Building your computer system.............................................................. 2-26
2.3.1
Additional tools and components to build a PC system............. 2-26
2.3.2
CPU installation......................................................................... 2-27
2.3.3
CPU heatsink and fan assembly installation.............................. 2-29
2.3.4
DIMM installation....................................................................... 2-31
2.3.5
Motherboard installation............................................................. 2-32
2.3.6
ATX Power connection............................................................... 2-34
2.3.7
SATA device connection............................................................. 2-35
2.3.8
Front I/O Connector................................................................... 2-36
2.3.9
Expansion Card installation....................................................... 2-37
2.3.10
Rear panel connection............................................................... 2-38
2.3.11
Audio I/O connections................................................................ 2-40
2.4
Starting up for the first time..................................................................... 2-42
2.5
Turning off the computer.......................................................................... 2-42
iii
Contents
Chapter 3:
3.1
3.2
BIOS setup program................................................................................... 3-1
3.2.1
EZ Mode...................................................................................... 3-2
3.2.2
Advanced Mode........................................................................... 3-3
3.3
Main menu................................................................................................... 3-5
3.4
Ai Tweaker menu......................................................................................... 3-7
3.5
Advanced menu........................................................................................ 3-14
3.5.1
CPU Configuration..................................................................... 3-15
3.5.2
PCH Configuration..................................................................... 3-17
3.5.3
SATA Configuration.................................................................... 3-18
3.5.4
System Agent Configuration...................................................... 3-20
3.5.5
USB Configuration..................................................................... 3-21
3.5.6
Onboard Devices Configuration................................................. 3-22
3.5.7
APM........................................................................................... 3-24
3.5.8
Network Stack............................................................................ 3-25
3.6
Monitor menu............................................................................................ 3-26
3.7
Boot menu................................................................................................. 3-29
3.8
Tools menu................................................................................................ 3-31
3.9
Exit menu................................................................................................... 3-33
3.10
Updating BIOS........................................................................................... 3-34
3.10.1
ASUS Update utility................................................................... 3-34
3.10.2
ASUS EZ Flash 2 utility.............................................................. 3-37
3.10.3
ASUS CrashFree BIOS 3 utility................................................. 3-38
3.10.4
ASUS BIOS Updater.................................................................. 3-39
Chapter 4:
Software support
4.1
Installing an operating system.................................................................. 4-1
4.2
Support DVD information........................................................................... 4-1
4.3
iv
BIOS setup
Knowing BIOS............................................................................................. 3-1
4.2.1
Running the support DVD............................................................ 4-1
4.2.2
Obtaining the software manuals.................................................. 4-2
Software information.................................................................................. 4-3
4.3.1
AI Suite II..................................................................................... 4-3
4.3.2
TurboV EVO................................................................................. 4-4
4.3.3
DIGI+ VRM................................................................................... 4-8
4.3.4
EPU.............................................................................................. 4-9
4.3.5
FAN Xpert+................................................................................ 4-10
4.3.6
Probe II...................................................................................... 4-11
Contents
4.4
4.3.7
USB 3.0 Boost........................................................................... 4-12
4.3.8
MyLogo2.................................................................................... 4-13
4.3.9
Audio configurations.................................................................. 4-15
Introduction to Intel&reg; 2012 Desktop responsiveness technologies..... 4-16
4.4.1
System Requirements for Intel&reg; 2012 Desktop responsiveness
technologies................................................................................................ 4-16
4.5
4.6
4.4.2
Intel&reg; Smart Response Technology............................................ 4-18
4.4.3
Intel&reg; Rapid Start Technology..................................................... 4-19
4.4.4
Intel&reg; Smart Connect Technology............................................... 4-25
RAID configurations................................................................................. 4-28
4.5.1
RAID definitions......................................................................... 4-28
4.5.2
Installing Serial ATA hard disks.................................................. 4-29
4.5.3
Setting the RAID item in BIOS................................................... 4-29
4.5.4
Intel&reg; Rapid Storage Technology Option ROM utility................. 4-29
Creating a RAID driver disk..................................................................... 4-33
4.6.1
Creating a RAID driver disk without entering the OS................. 4-33
4.6.2
Creating a RAID driver disk in Windows&reg;.................................. 4-33
4.6.3
Installing the RAID driver during Windows&reg; OS installation....... 4-34
4.6.4
Using a USB floppy disk drive.................................................... 4-35
Chapter 5:
5.1
5.2
5.3
Multiple GPU technology support
ATI&reg; CrossFireX™ technology................................................................... 5-1
5.1.1
Requirements............................................................................... 5-1
5.1.2
Before you begin.......................................................................... 5-1
5.1.3
Installing two CrossFireX™ graphics cards................................. 5-2
5.1.4
Installing the device drivers.......................................................... 5-3
5.1.5
Enabling the ATI&reg; CrossFireX™ technology................................ 5-3
NVIDIA&reg; SLI™ technology.......................................................................... 5-4
5.2.1
Requirements............................................................................... 5-4
5.2.2
Installing two SLI-ready graphics cards....................................... 5-4
5.2.3
Installing the device drivers.......................................................... 5-5
5.2.4
Enabling the NVIDIA&reg; SLI™ technology...................................... 5-5
LucidLogix&reg; Virtu MVP™............................................................................ 5-8
5.3.1
Installing LucidLogix&reg; Virtu MVP™.............................................. 5-8
5.3.2
Setting up your display................................................................. 5-9
5.3.3 Configuring LucidLogix&reg; Virtu MVP™....................................... 5-10
Appendices............................................................................................................... A-1
ASUS Recycling/Takeback Services.............................................................A-2
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
•
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
•
Ensure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
vi
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
•
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
•
Chapter 2: Hardware information
This chapter lists the hardware setup procedures that you have to perform when
installing system components. It includes description of the switches, jumpers, and
connectors on the motherboard.
•
Chapter 3: BIOS setup
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
•
Chapter 4: Software support
This chapter describes the contents of the support DVD that comes with the
motherboard package and the software.
•
Chapter 5: Multiple GPU technology support
This chapter describes the ATI&reg; CrossFireX™ and NVIDIA&reg; SLI™ feature and shows
the graphics card installation procedures.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
vii
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
&lt;Key&gt;
Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example: &lt;Enter&gt; means that you must press the Enter or Return key.
&lt;Key1&gt; + &lt;Key2&gt; + &lt;Key3&gt; If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).
viii
Example: &lt;Ctrl&gt; + &lt;Alt&gt; + &lt;Del&gt;
P8Z77-V LK specifications summary
CPU
Chipset
Memory
Expansion
slots
Graphics
Multi-GPU
support
Storage
LAN
Audio
LGA1155 socket for Intel&reg; 3rd / 2nd Generation Core™ i7 / i5 / i3 / Pentium&reg; / Celeron&reg; processors**
Supports 32nm and 22nm CPU
Supports Intel&reg; Turbo Boost technology 2.0*
* The Intel&reg; Turbo Boost technology 2.0 support depends on the CPU types.
** Refer to www.asus.com for Intel&reg; CPU support list.
Intel&reg; Z77 Express Chipset
4 x DIMMs, max. 32GB, DDR3 2400(O.C.)* / 2200(O.C.)* / 2133
(O.C.)/1866(O.C.) /1600/1333/1066 MHz, non-ECC, un-buffered memory
Dual-channel memory architecture
Supports Intel&reg; Extreme Memory Profile (XMP)
*Hyper DIMM support is subject to the physical characteristics of individual
CPUs. Please refer to Memory QVL (Qualified Vendors List) for details.
2 x PCI Express 3.0* / 2.0 x16 slots (single at x16 or dual at x8 mode)
1 x PCI Express 2.0 x16 slot [black] (max. at x4 mode, compatible with PCIe x1 and x4 devies)
2 x PCI Express 2.0 x1 slots
2 x PCI slots
* PCIe 3.0 speed is supported by Intel&reg; 3rd generation CoreTM processors.
Integrated Graphics Processor - Intel&reg; HD Graphics Support
Multi-VGA output support: DisplayPort, HDMI, DVI, RGB port
-- Supports DisplayPort 1.1a with max.resolution up to 2560 x 1600 @60Hz
- Supports HDMI with max.resolution up to 1920 x 1200 @60Hz
- Supports DVI with max. resolution up to 1920 x 1200 @60Hz
- Supports RGB with max. resolution up to 2048 x 1536 @75Hz
- Maximum shared memory of 1696MB
Supports NVIDIA&reg; Quad-GPU SLITM Technology (with 2 PCIe x16 graphics cards)
Supports AMD&reg; 3-way / Quad-GPU CrossFireXTM Technology (with two PCIe x16 graphics card)
Supports Lucid MVP Technology*
* LucidLogix Virtu&reg; Universal MVPTM supports Windows&reg; 7 Operating
Systems.
Intel&reg; Z77 Express Chipset:
- 2 x Serial ATA 6.0 Gb/s ports (gray) with RAID 0,1,5,10 support
- 4 x Serial ATA 3.0 Gb/s ports (blue) with RAID 0,1,5,10 support
- Supports Intel&reg; Smart Response Technology, Intel&reg; Rapid Start Technology, Intel&reg; Smart Connect Technology*
*Support for Intel&Ccedil;Core&Ccedil; processor family with Windows 7 operating
systems.
Realtek&reg; 8111F Gigabit LAN controller
Realtek&reg; ALC892 8-channel High Definition Audio CODEC
-Supports Jack-Detection, Multi-streaming and Front Panel JackRetasking
- Optical S/PDIF out ports at back I/O
(continued on the next page)
ix
P8Z77-V LK specifications summary
USB
ASUS unique
features
ASUS
exclusive
overclocking
features
Intel&reg; Z77 Express Chipset - supports ASUS USB 3.0 Boost UASP Mode.*
- 2 x USB 3.0 /2.0 ports at the mid-board for front panel support
- 2 x USB 3.0 /2.0 ports at the back panel (blue)
Intel&reg; Z77 Express Chipset
- 10 x USB 2.0 ports (8 ports at mid-board, 2 ports at back panel)
ASMedia USB 3.0 controller - supports ASUS USB3.0 Boost UASP Mode
- 2 x USB 3.0 ports at the back panel (blue)
*The USB 3.0 ports only support Windows 7&reg; or later versions. UASP
standard only supports Windows&reg; 8.
ASUS DIGI+ VRM
- Digital Power Control: Digital power Design for the CPU and iGPU
- ASUS 4+1+1 Phase Power Design
ASUS Exclusive Features
- Network iControl featuring instant network bandwidth domination for top network program in use
- USB 3.0 Boost featuring the latest USB 3.0 UASP standard
- MemOK!
- TurboV
- GPU Boost
- AI Charger+
- Disk Unlocker featuring 3TB+ HDD support
- AI Suite II
- Anti Surge
- 100% Solid Capacitors
ASUS Quiet Thermal Solution
- ASUS Fanless Design: Stylish Heatsink solution &amp; MOS Heatsink Solution
- ASUS Fan Xpert+
ASUS EZ DIY
- ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 2
- ASUS My Logo 2
Precision Tweaker 2
- vCore: Adjustable CPU voltage at 0.005V increment
- vCCSA: 191-step system agent voltage control
- vDRAM Bus: 191-step Memory voltage control
- vPCH: 191-step Chipset voltage control
- iGPU: 128-step iGPU voltage control
SFS (Stepless Frequency Selection)
-BCLK/PCIE frequency tuning from 80MHz up to 300MHz at 0.1MHz
increment
Overclocking Protection
- ASUS C.P.R.(CPU Parameter Recall)
(continued on the next page)
P8Z77-V LK specifications summary
Rear panel I/O
ports
Internal I/O
connectors
BIOS features
Manageability
Accessories
Support DVD
Form Factor
1 x PS/2 keyboard / mouse combo port
1 x Optical S/PDIF out port
1 x DisplayPort
1 x HDMI port
1 x DVI port
1 x RGB port
1 x LAN (RJ-45) port
4 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
6-jack 8-channel audio I/O ports
1 x USB 3.0/2.0 connector supports additional 2 USB ports (19-pin)
4 x USB 2.0/1.1 connectors support additional 8 USB ports
2 x SATA 6.0Gb/s connectors (gray)
4 x SATA 3.0Gb/s connectors (blue)
1 x COM port connector
1 x CPU Fan connector (4-pin)
3 x Chassis Fan connectors (4-pin)
1 x Front panel audio connector
1 x S/PDIF Out Header
24-pin ATX Power connector
8-pin ATX 12V Power connector
1 x System Panel
1 x EPU switch
1 x MemOK! Button
1 x GPU Boost switch
1 x Clear CMOS jumper
64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0, WfM2.0, SM
BIOS 2.7, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2,
ASUS CrashFree BIOS 3, F12 PrintScreen, F3 Shotcut Function
and ASUS DRAM SPD (Serial Presence Detect) memory
information
WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE
2 x Serial ATA 6.0Gb/s cables
1 x ASUS SLI bridge connector
1 x User Manual
1 x I/O Shield
1 x Support DVD
Drivers
ASUS Utilities
ASUS Update
Anti-virus software (OEM version)
ATX Form Factor, 12”x 8.8” (30.5cm x 22.4 cm)
*Specifications are subject to change without notice.
xi
xii
Chapter 1
Chapter 1:
Product introduction
1.1
Welcome!
Thank you for buying an ASUS&reg; P8Z77-V LK motherboard!
Chapter 1
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
nual
User Ma
ASUS P8Z77-V LK
motherboard
User guide
Support DVD
2 x Serial ATA 6.0 Gb/s cables
1 x ASUS I/O Shield
1 x ASUS SLI™ bridge
connector
•
If any of the above items is damaged or missing, contact your retailer.
•
The illustrated items above are for reference only. Actual product specifications may
vary with different models.
ASUS P8Z77-V LK
1-1
1.3
Special features
1.3.1
Product highlights
Chapter 1
LGA1155 socket for Intel&reg; 3rd / 2nd Generation Core™ i7/ Core™ i5/ Core™ i3 /
Pentium&reg; / Celeron&reg; Processors
This motherboard supports Intel&reg; 3rd/2nd generation Core™ i7 / i5 / i3 / Pentium&reg; / Celeron&reg;
processors in the LGA1155 package, with iGPU, memory and PCI Express controllers
integrated to support onboard graphics output with dedicated chipsets, 2-channel (4 DIMM)
DDR3 memory and 16 PCI Express 3.0/2.0 lanes. This provides great graphics performance.
Intel&reg; 3rd / 2nd generation Core™ i7 / i5 / i3 / Pentium&reg; / Celeron&reg; processors are among the
most powerful and energy efficient CPUs in the world.
Intel&reg; Z77 Express Chipset
The Intel&reg; Z77 Express Chipset is a single-chipset design to support socket 1155 Intel&reg; 2nd
/ 3rd generation Core™ i7 / i5 / i3 processors. It provides improved performance by utilizing
serial point-to-point links, allowing increased bandwidth and stability. Additionally, Z77 chipset
provides 4 USB 3.0 ports for 10 times faster data retrieval speed. Moreover, Intel&reg; Z77
Express Chipset can also enable iGPU function, letting users enjoy the latest Intel integrated
graphic performance.
Dual-Channel DDR3 2400(O.C.)* / 2200(O.C.)* / 2133(O.C) / 1866(O.C.) / 1600 / 1333 /
1066 Support
The motherboard supports DDR3 memory that features data transfer rates of 2400(O.C.)* /
2200(O.C.)* / 2133(O.C.) / 1866(O.C.)/ 1600 / 1333 / 1066 MHz to meet the higher bandwidth
requirements of the latest 3D graphics, multimedia, and Internet applications. The dualchannel DDR3 architecture enlarges the bandwidth of your system memory to boost system
performance.
* Due to CPU behavior, DDR3 2200/MHz memory module will run at DDR3 1600 MHz frequency as
default.
Complete USB 3.0 Integration
ASUS facilitates strategic USB 3.0 accessibility for both the front and rear panel - 4 USB 3.0
ports in total. Experience the latest plug &amp; play connectivity at speeds up to 10 times faster
than USB 2.0. The P8Z77-V LK affords greater convenience to high speed connectivity.
Quad-GPU SLI™ and Quad-GPU CrossFireX™ Support
Flexible Multi-GPU Solutions, Your Weapon of Choice!
P8Z77-V LK brings you the multi-GPU choice of either SLI™ or CrossFireX. The motherboard
features the most powerful Intel&reg; Z77 platform to optimize PCIe allocation in multiple GPU
configurations. Expect a brand-new gaming style you’ve never experienced before!
1-2
Chapter 1: Product Introduction
Intel&reg; Smart Response Technology
Chapter 1
SSD Speed with HDD Capacity
Intel&reg; Smart Response Technology boosts overall system performance. It uses an installed
fast SSD (min 18.6GB available capacity required) as a cache for frequently accessed data.
Key benefits include reduced load and wait times, and lower power consumption through the
elimination of unnecessary hard drive spin. This technology combines SSD performance with
hard drive capacity, operating up to 4X faster than a hard drive-only system, and an important
part of Green ASUS eco-friendly computing.
* Intel&reg; Smart Response Technology is supported by 2nd/3rd generation Intel&reg; Core™ processor
family on Windows&reg; 7™ operating systems.
** Operating systems must be installed on the HDD to launch Intel&reg; Smart Response Technology.
The capacity of the SSD is reserved for caching function.
Intel&reg; Smart Connect Technology
Your computer can receive web updates with fresh content for selected applications, even
when the system is in sleep mode. This means less time waiting for applications to update
and sync with the cloud, leading to a more efficient computing experience.
Intel&reg; Rapid Start Technology
Allows your computer to quickly resume from a low-power hibernate state in seconds.
Saving your system memory to the designed SSD, it provides your computer a faster wakeup response time, while still keeping the energy use low.
PCI Express&reg; 3.0 Ready
PCI Express&reg; 3.0 (PCIe 3.0) is the latest PCI Express bus standard with improved encoding
schemes that provide twice the performance of current PCIe 2.0. Total bandwidth for a x16
link reaches a maximum of 32GB/s, double the 16GB/s of PCIe 2.0 (in x16 mode). As such,
PCIe 3.0 provides users unprecedented data speeds, combined with the convenience and
seamless transition offered by complete backward compatibility with PCIe 1.0 and PCIe
2.0 devices. PCIe 3.0 will become a must-have feature for users who wish to improve and
optimize graphic performance, as well as have the latest technology available to them.
PCIe 3.0 speed is supported by Intel&reg; 3rd generation processors.
S/PDIF out connector at the back I/O
This motherboard provides convenient connectivity to external home theater audio systems
via the optical S/PDIF (SONY-PHILIPS Digital Interface) out connecor at the back I/O. The
S/PDIF transfers digital audio without converting it to analog format and keeps the best signal
quality.
Gigabit LAN solution
The onboard LAN controller is a highly integrated Gb LAN controller. It is enhanced with an
ACPI management function to provide efficient power management for advanced operating
systems.
ASUS P8Z77-V LK
1-3
8-channel high definition audio
Chapter 1
The onboard 8-channel HD audio (High Definition Audio, previously codenamed Azalia)
CODEC enables high-quality 192KHz/24-bit audio output and jack-detect feature that
automatically detects and identifies what types of peripherals are plugged into the audio
I/O jacks and notifies users of inappropriate connection, which means there will be no more
confusion of Line-in, Line-out, and Mic jacks.
100% All High-quality Conductive Polymer Capacitors
This motherboard uses all high-quality conductive polymer capacitors for durability, improved
lifespan, and enhanced thermal capacity.
ErP ready
The motherboard is European Union&acute;s Energy-related Products (ErP) ready, and ErP
requires products to meet certain energy efficiency requirements in regards to energy
consumptions. This is in line with ASUS vision of creating environment-friendly and energyefficient products through product design and innovation to reduce carbon footprint of the
product and thus mitigate environmental impacts.
1.3.2
ASUS DIGI+ VRM Digital Power Design
Digital Power Control: Digital Power Design for the CPU and iGPU
All-new digital CPU power controls work perfectly together to match digital power signal
(SVID) requests from the CPU, with ultra-fast sensing and response efficiently delivering
precision power. Accurate delivery reduces waste, and provides more stable CPU Vcore
voltages. Users can adjust CPU and its processor graphics (iGPU) voltages for various
overclocking scenarios, with accurate input through UEFI BIOS tuning or the exclusive ASUS
interface. This proprietary design increases overlocking headroom to push performance to its
full potential.
ASUS EPU
Tap into the world’s first real-time PC power saving chip through the AI Suite II utility. Get
total system-wide energy optimization by automatically detecting current PC loadings and
intelligently moderating power consumption. This also reduces fan noise and extends
component longevity.
1.3.3
ASUS Exclusive Features
USB 3.0 Boost
Faster USB 3.0 Transmission with UASP
New ASUS USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol), the
latest USB 3.0 standard. With USB 3.0 Boost technology, a USB device’s transmission speed
is significantly increased up to 170%, adding to an already impressive fast USB 3.0 transfer
speed. ASUS software automatically accelerates data speeds for compatible USB 3.0
peripherals without the need for any user interaction.
1-4
Chapter 1: Product Introduction
MemOK!
Any Memory is A-OK!
Chapter 1
MemOK! quickly ensures memory boot compatibility. This remarkable memory rescue tool
requires a mere push of the button to patch memory issues. MemOK! determines failsafe
settings and dramatically improves your system boot success. Get your system up and
running in no time.
Network iControl
Real-Time Network Bandwidth Control
With a one-click on/off button, the software currently in use is set as top priority over all other
network programs, dominating the network bandwidth with ease. Moreover, you can prioritize
your favorite software easily by configuring profiles through the intuitive user interface. Within
the profile, programs can be pre-scheduled to run in a specific time period to avoid network
clogging, and long-waits on downloads. Auto PPPoE network gives a one-step setup, and an
intuitive network bandwidth control center.
GPU Boost
Go the Limit with iGPU Level Up!
GPU Boost accelerates the integrated GPU for extreme graphics performance. The userfriendly interface facilitates flexible frequency adjustments. It easily delivers stable systemlevel upgrades for every use.
AI Suite II
One-stop Access to Innovative ASUS Features
With its user-friendly interface, ASUS AI Suite II consolidates all the exclusive ASUS features
into one simple to use software package. It allows you to supervise overclocking, energy
management, fan speed control, voltage and sensor readings, and even interact with mobile
devices via Wi-Fi. This all-in-one software offers diverse and ease to use functions, with no
need to switch back and forth between different utilities.
ASUS TurboV
Feel the adrenaline rush of real-time OC-now a reality with the ASUS TurboV. This easy OC
tool allows you to overclock without exiting or rebooting the OS; and its user-friendly interface
makes overclock with just a few clicks away. Moreover, the ASUS OC profiles in TurboV
provides the best O.C. settings in different scenarios.
ASUS MyLogo2™
This feature allows you to convert your favorite photo into a 256-color boot logo for a more
colorful and vivid image on your screen.
Precision Tweaker 2
Allows you to fine-tune the VCore voltage in 0.005V steps and DRAM voltage in 0.00625V
steps to achieve the most precise setting for the ultimate overclocking configuration.
C.P.R. (CPU Parameter Recall)
The BIOS C.P.R. feature automatically restores the CPU default settings when the system
hangs due to overclocking failure. C.P.R. eliminates the need to open the system chassis and
clear the RTC data. Simply shut down and reboot the system, and the BIOS automatically
restores the CPU parameters to their default settings.
ASUS P8Z77-V LK
1-5
1.3.4 ASUS Quiet Thermal Solutions
ASUS Quiet Thermal solution makes system more stable and enhances the overclocking
capability.
Chapter 1
Fan Xpert+
ASUS Fan Xpert+ intelligently allows you to adjust the CPU fan speed according to different
ambient temperatures caused by different climate conditions in different geographic regions
and your PC’s loading. The built-in variety of useful profiles offer flexible controls of fan speed
to achieve a quiet and cool environment.
Fanless Design: stylish heatsink solution
The stylish heatsink features a 0-dB thermal solution that offers users a noiseless PC
environment. Not only the beautiful shape upgrades the visual enjoyment for motherboard
users, but also the heatsink design lowers the temperature of the chipset and power phase
area through high efficient heat-exchange. Combined with usability and aesthetics, the ASUS
stylish heatsink will give users an extremely silent and cooling experience with the elegant
appearance!
1.3.5
ASUS EZ DIY
ASUS UEFI BIOS (EZ Mode)
Flexible and Easy BIOS Interface
ASUS UEFI BIOS offers the first mouse-controlled graphical BIOS designed with selectable
modes, providing a user-friendly interface that goes beyond the traditional keyboard-only
controls. It also fully utilizes 2.2TB and larger hard drives in 64-bit operating systems with
native support.
ASUS exclusive interface
EZ Mode displays frequently-accessed info. Users can choose system performance settings,
and drag and drop boot priorities. Advanced Mode for performance enthusiasts includes
detailed DRAM settings via a dedicated memory info page for complete insight.
New upgrade! Quick and easy information for enhanced system control
- F12 BIOS snapshot hotkey for sharing UEFI information and troubleshooting
- New F3 Shortcut for most accessed information
- ASUS DRAM SPD (Serial Presence Detect) information for accessing memory information, detecting faulty DIMMs, and helping with difficult POST situations.
ASUS EZ-Flash 2
ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a
bootable floppy disk or an OS-based utility.
1-6
Chapter 1: Product Introduction
1.3.6
Other special features
LucidLogix&reg; Virtu MVP™
Chapter 1
LucidLogix&reg; Virtu MVP™ featuring HyperFormance™ Technology boosts your PCIe graphics
card up to 30% beyond its original performance. Designed for Intel&reg; processor graphics and
Windows&reg; 7 PCs, it perfectly combines the performance of discrete graphic cards with fast
computing iGPU. Also, with newly designed Virtual Sync, users can enjoy a smoother gaming
experience by eliminating tearing artifacts. LucidLogix&reg; Virtu MVP™ can also dynamically
assigns tasks to the best available graphics resource, based on power, performance, and
system load. This allows users to fully utilize 3x faster video conversion with Intel&reg; Quick
Sync Video technology while retaining high-end 3D rendering and gaming performance,
provided by both NVIDIA and AMD graphic cards. When the PCIe graphic cards are not
required, the graphics control switches to the Intel&reg; processor graphics, reducing the PCIe
graphics power use down to zero, making the system more environment-friendly. For users
searching for perfection, LucidLogix&reg; Virtu MVP™ provides great graphical performance, and
best quality and efficiency.
* LucidLogix&reg; Virtu MVP™ supports Windows&reg; operating system.
** Intel&reg; Quick Sync Video feature is supported by 3rd/2nd generation Intel&reg; Core™ processor
family
DisplayPort 1.1a Support
DisplayPort is a digital display interface standard that delivers up to 10.8 Gbps of bandwidth
over standard cables, providing billions of colors and bi-directional communications, thus
enabling the fastest refresh rates, and the highest resolution digital display through a single
cable. Also, it supports HDCP copy protection for Blu-ray discs. Simply output 3D signals
through the connected DisplayPort 1.1a cable with your 3D display, then you can sit back and
enjoy a perfect 3D animation experience.
HDMI Support
Enjoy Full HD 1080p Multimedia Home-Theater Entertainment
High Definition Multimedia Surface (HDMI) is a set of digital video standards that delivers
mulit-channel audio and uncompressed digital video for full HD 1080p visuals through a
single cable. Supporting HDCP copy protection such as HD DVD and blu-ray discs, HDMI
provides you with the highest quality home theater experience.
ASUS P8Z77-V LK
1-7
Chapter 1
1-8
Chapter 1: Product Introduction
Chapter 2
Chapter 2:
Hardware information
2.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Chapter 2
•
ASUS P8Z77-V LK
2-1
2.2
Motherboard overview
2.2.1
Motherboard layout
1
2
3
4
22.9cm(9.0in)
KBMS_USB12
DIGI
+VRM
ASM
1442
5
DDR3 DIMM_B2 (64bit, 240-pin module)
DRAM_LED
2
CHA_FAN1
CPU_FAN
PCIEX1_1
1
9
Lithium Cell
CMOS Power
USB3_34
RTL
8111F
PCIEX16_1
PCIEX1_2
ASM
1083
P8Z77-V LK
Intel&reg;
Z77
PCI1
Super
I/O
10
11
SB_PWR
CLRTC
PCIEX16_3
AAFP
20
EPU_LED USB910
CHA_FAN2 COM1
USB78
USB56
USB34
PANEL
SATA6G_2 SATA3G_4 SATA3G_2
8Mb
BIOS
PCI2
ALC
892
SATA6G_1 SATA3G_3 SATA3G_1
PCIEX16_2
SPDIF_OUT
7
8
30.5cm(12.0in)
ASM
1042
AUDIO
6
MemOK!
CHA_FAN3 EATXPWR
LAN_USB3_E12
DDR3 DIMM_B1 (64bit, 240-pin module)
DVI_VGA
LGA1155
Chapter 2
USB3_12
DDR3 DIMM_A2 (64bit, 240-pin module)
EATX12V
DDR3 DIMM_A1 (64bit, 240-pin module)
SPDIFO
_HDMI
_DP
12
13
EPU
19
1
18 17
16
15
14
Refer to 2.2.8 Connectors and 2.3.10 Rear panel connection for more information about
rear panel connectors and internal connectors.
2-2
Chapter 2: Hardware information
Layout contents
1.CPU, Chassis and power fan connectors
(4-pin CPU_FAN, 4-pin CHA_FAN1/2/3)
Page
2-23
2.
EATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2-24
3.
Intel&reg; CPU socket
2-4
4.
DDR3 DIMM sockets
2-5
5.
GPU Boost LED
2-19
6.
GPU Boost Switch
2-17
7.
MemOK! button
2-16
8.
DRAM LED
2-18
9.
USB 3.0 connector (20-1 pin USB3_34)
2-23
10.
Clear RTC RAM (3-pin CLRTC)
2-15
11.
Onboard LED (SB_PWR)
2-18
12.
Intel&reg; Z77 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1–4 [blue])
2-23
13.
Intel&reg; Z77 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray])
2-20
14.
System panel connector (20-8 pin PANEL)
2-25
15.
USB connectors (10-1 pin USB3~10)
2-21
16.
EPU Switch
2-17
17.
EPU LED
2-19
18.
Serial port connectors (10-1 pin COM1)
2-20
19.
Front panel audio connector (10-1 pin AAFP)
2-21
20.
Digital audio connector (4-1 pin SPDIF_OUT)
2-22
ASUS P8Z77-V LK
Chapter 2
Connectors/Jumpers/Slots
2-3
2.2.2
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1155 socket designed for the Intel&reg; 3rd /
2nd Generation Core™ i7 / i5 / i3 / Pentium&reg; / Celeron&reg; Processors.
P8Z77-V LK
P8Z77-V LK CPU socket LGA1155
Chapter 2
Ensure that all power cables are unplugged before installing the CPU.
2-4
•
The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a
LGA1156 CPU on the LGA1155 socket.
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1155 socket.
•
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
Chapter 2: Hardware information
2.2.3
System memory
The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets.
DIMM_B1
DIMM_B2
DIMM_A1
DIMM_A2
A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR
or DDR2 memory module to the DDR3 slot.
Chapter 2
P8Z77-V LK
P8Z77-V LK 240-pin DDR3 DIMM sockets
Recommended memory configurations
We recommend that you install the memory modules from the blue slots for better
overclocking capability.
ASUS P8Z77-V LK
2-5
Memory configurations
You may install 1GB, 2GB, 4GB and 8GB unbuffered non‑ECC DDR3 DIMMs into the DIMM
sockets.
Chapter 2
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
Due to CPU behavior, DDR3 2200/2000/1800 MHz memory module will run at DDR3
2133/1866/1600 MHz frequency as default.
•
According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect
the CPU.
•
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
•
Due to the memory address limitation on 32-bit Windows OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
For more details, refer to the Microsoft&reg; support site at
http://support.microsoft.com/kb/929605/en-us.
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 3.4 Ai Tweaker menu for manual memory
frequency adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
Visit the ASUS website for the latest QVL.
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 2400MHz
capability
2-6
Vendors
Part No.
Size
Transcend
TX2400KLU-4GK (381850)(XMP) 4GB(2x 2GB)
S S / C h i p C h i p Timing
DS Brand NO.
SS
-
-
9
Voltage D I M M s o c k e t s u p p o r t
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
1.65V
•
•
Chapter 2: Hardware information
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 2250MHz
capability
Vendors
Part No.
Size
S S / C h i p C h i p Timing
DS Brand NO.
Kingston
KHX2250C9D3T1K2/4GX(XMP)
4GB(2x 2GB)
DS
-
-
Voltage DIMM socket support (Optional)
1 DIMM 2 DIMMs 4 DIMMs
1.65V
•
•
•
-
Vendors
Part No.
Size
SS/
DS
Chip Chip Timing
Brand NO.
Voltage
G.SKILL
F3-17600CL8D-4GBPS(XMP)
4GB(2x 2GB)
DS
-
-
8-8-8-24
1.65V
DIMM socket support (Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
KINGMAX
FLKE85F-B8KJAFEIH(XMP)
4GB(2x 2GB)
DS
-
-
-
1.5V-1.7V
•
Chapter 2
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 2200MHz
capability
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 2133MHz
capability
Vendors
Part No.
Size
SS/ Chip Chip Timing
DS Brand NO.
Voltage
DIMM socket support
(Optional)
A-DATA
AX3U2133GC2G9B-DG2(XMP)
2GB
SS
-
-
9-11-9-27
1.55~1.75V
1 DIMM 2 DIMMs 4 DIMMs
•
CORSAIR
CMT4GX3M2A2133C9(XMP)
4GB(2x 2GB)
DS
-
-
9-10-9-24
1.65V
•
CORSAIR
CMT4GX3M2B2133C9(XMP)
4GB(2x 2GB)
DS
-
-
9-10-9-27
1.50V
•
•
GEIL
GE34GB2133C9DC(XMP)
2GB
DS
-
-
9-9-9-28
1.65V
•
•
GEIL
GU34GB2133C9DC(XMP)
4GB(2 x 2GB)
DS
-
-
9-9-9-28
1.65V
•
•
•
KINGSTON
KHX2133C9AD3T1K2/4GX(XMP)
4GB(2x 2GB )
DS
-
-
-
1.65V
•
•
•
KINGSTON
KHX2133C9AD3X2K2/4GX(XMP)
4GB(2 x 2GB)
DS
-
-
9-11-9-27
1.65V
•
•
•
KINGSTON
KHX2133C9AD3T1K4/8GX(XMP)
8GB(4 x 2GB)
DS
-
-
9-11-9-27
1.65V
•
•
•
KINGSTON
KHX2133C9AD3T1FK4/8GX(XMP) 8GB(4x 2GB)
DS
-
-
-
1.65V
•
•
•
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 2000MHz
capability
Vendors
Apacer
Part No.
78.AAGD5.9KD(XMP)
Size
6GB(3 x 2GB)
SS/
DS
DS
Chip Chip Timing
Brand NO.
-
-
9-9-9-27
Voltage DIMM socket support
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
1.65V •
•
•
CORSAIR
CMZ4GX3M2A2000C10(XMP)
4GB(2 x 2GB)
SS
-
-
10-10-10-27 1.50V
•
•
CORSAIR
CMT6GX3M3A2000C8(XMP)
6GB(3 x 2GB)
DS
-
-
8-9-8-24
1.65V
•
•
G.SKILL
F3-16000CL9D-4GBFLS(XMP)
4GB(2 x 2GB)
DS
-
-
9-9-9-24
1.65V
•
•
•
G.SKILL
F3-16000CL9D-4GBTD(XMP)
4GB(2 x 2GB)
DS
-
-
9-9-9-27
1.65V
•
•
•
•
•
•
•
G.SKILL
F3-16000CL6T-6GBPIS(XMP)
6GB(3x 2GB )
DS
-
-
6-9-6-24
1.65V
GEIL
GUP34GB2000C9DC(XMP)
4GB(2 x 2GB)
DS
-
-
9-9-9-28
1.65V
KINGSTON
KHX2000C9AD3T1K2/
4GX(XMP)
4GB(2x 2GB )
DS
-
-
-
1.65V
KINGSTON
KHX2000C9AD3W1K2/
4GX(XMP)
4GB(2x 2GB )
DS
-
-
-
1.65V
•
•
KINGSTON
KHX2000C9AD3T1K2/
4GX(XMP)
4GB(2 x 2GB)
DS
-
-
9
1.65V
•
•
KINGSTON
KHX2000C9AD3W1K3/
6GX(XMP)
6GB(3x 2GB )
DS
-
-
-
1.65V
•
•
KINGSTON
KHX2000C9AD3T1K3/
6GX(XMP)
6GB(3x 2GB )
DS
-
-
-
1.65V
•
•
Transcend
TX2000KLN-8GK(XMP)
8GB(2 x 4GB)
DS
-
-
-
1.6V
•
•
ASUS P8Z77-V LK
•
•
•
•
2-7
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 1866MHz
capability
Vendors
Part No.
Size
SS/ Chip Chip Timing
DS Brand NO.
Voltage
CORSAIR
CMT4GX3M2A1866C9(XMP)
4GB(2 x 2GB) DS
-
-
9-9-9-24
1.65V
DIMM socket support (Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
•
•
CORSAIR
CMT6GX3MA1866C9(XMP)
6GB(3 x 2GB) DS
-
-
9-9-9-24
1.65V
•
•
CORSAIR
CMZ8GX3M2A1866C9(XMP)
8GB(2 x 4GB) DS
-
-
9-10-9-27 1.50V
•
•
•
G.SKILL
F3-14900CL9D-8GBXL(XMP)
8GB(2 x 4GB) DS
-
-
9-10-9-28 1.5V
•
•
•
G.SKILL
F3-14900CL9Q-8GBXL(XMP)
8GB(2GB x 4) DS
-
-
9-9-9-24
1.6V
•
•
•
KINGSTON
KHX1866C9D3T1K3/
3GX(XMP)
3GB(3 x 1GB) SS
-
-
-
1.65V
•
•
•
KINGSTON
KHX1866C9D3T1K3/
6GX(XMP)
6GB(3 x 2GB) DS
-
-
-
1.65V
•
•
•
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 1600MHz
capability
Chapter 2
Vendors
Paart No.
Size
SS/ Chip
DS Brand
Chip NO.
Timing
Voltage
A-DATA
AM2U16BC2P1
2GB
SS
A-DATA
3CCD-150 9A EL1126T
-
DIMM socket support
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
•
•
A-DATA
AD31600E001GM(O)U3K
3GB(3 x 1GB)
SS
-
-
8-8-8-24
1.65V-1.85V
•
•
A-DATA
AX3U1600XB2G79-2X(XMP)
4GB(2 x 2GB)
DS -
-
7-9-7-21
1.55V-1.75V
A-DATA
AM2U16BC4P2
4GB
DS A-DATA
3CCD-150 9A EL1126T
-
•
•
•
A-DATA
AX3U1600GC4G9-2G(XMP)
8GB(2 x 4GB)
DS -
-
9-9-9-24
1.55V-1.75V
•
•
•
A-DATA
AX3U1600XC4G79-2X(XMP)
8GB(2 x 4GB)
DS -
-
7-9-7-21
1.55V-1.75V
•
•
•
CORSAIR
TR3X3G1600C8D(XMP)
3GB(3 x 1GB)
SS
-
-
8-8-8-24
1.65V
•
•
CORSAIR
CMD12GX3M6A1600C8(XMP)
12GB(6x2GB)
DS -
-
8-8-8-24
1.65V
•
•
•
CORSAIR
CMP4GX3M2A1600C8(XMP)
4GB(2 x 2GB)
DS -
-
8-8-8-24
1.65V
•
•
•
CORSAIR
CMP4GX3M2A1600C9(XMP)
4GB(2 x 2GB)
DS -
-
9-9-9-24
1.65V
•
•
•
CORSAIR
CMP4GX3M2C1600C7(XMP)
4GB(2 x 2GB)
DS -
-
7-8-7-20
1.65V
•
•
•
CORSAIR
CMX4GX3M2A1600C9(XMP)
4GB(2 x 2GB)
DS -
-
9-9-9-24
1.65V
•
•
CORSAIR
CMX4GX3M2A1600C9(XMP)
4GB(2 x 2GB)
DS -
-
9-9-9-24
1.65V
•
•
•
CORSAIR
TR3X6G1600C8 G(XMP)
6GB(3 x 2GB)
DS -
-
8-8-8-24
1.65V
•
•
•
CORSAIR
TR3X6G1600C8D G(XMP)
6GB(3 x 2GB)
DS -
-
8-8-8-24
1.65V
•
•
•
CORSAIR
TR3X6G1600C9 G(XMP)
6GB(3 x 2GB)
DS -
-
9-9-9-24
1.65V
•
•
•
CORSAIR
CMP8GX3M2A1600C9(XMP)
8GB(2 x 4GB)
DS -
-
9-9-9-24
1.65V
•
•
•
CORSAIR
CMZ8GX3M2A1600C7R(XMP)
8GB(2 x 4GB)
DS -
-
7-8-7-20
1.50V
•
•
•
CORSAIR
CMX8GX3M4A1600C9(XMP)
8GB(4 x 2GB)
DS -
-
9-9-9-24
1.65V
•
•
•
Crucial
BL25664BN1608.16FF(XMP)
6GB(3 x 2GB)
DS -
-
-
-
•
•
•
G.SKILL
F3-12800CL9D-2GBNQ(XMP)
2GB(2 x 1GB)
SS
-
-
9-9-9-24
1.5V
•
•
•
G.SKILL
F3-12800CL7D-4GBRH(XMP)
4GB(2 x 2GB)
SS
-
-
7-7-7-24
1.6V
•
•
•
G.SKILL
F3-12800CL7D-4GBRM(XMP)
4GB(2 x 2GB)
DS -
-
7-8-7-24
1.6V
•
•
•
G.SKILL
F3-12800CL8D-4GBRM(XMP)
4GB(2 x 2GB)
DS -
-
8-8-8-24
1.60V
•
•
•
G.SKILL
F3-12800CL9D-4GBECO(XMP)
4GB(2 x 2GB)
DS -
-
9-9-9-24
XMP 1.35V
•
•
•
G.SKILL
F3-12800CL9D-4GBRL(XMP)
4GB(2 x 2GB)
DS -
-
9-9-9-24
1.5V
•
•
•
G.SKILL
F3-12800CL9T-6GBNQ(XMP)
6GB(3 x 2GB)
DS -
-
9-9-9-24
1.5V~1.6V
•
•
•
G.SKILL
F3-12800CL7D-8GBRH(XMP)
8GB(2 x 4GB)
DS -
-
7-8-7-24
1.6V
•
•
•
G.SKILL
F3-12800CL8D-8GBECO(XMP)
8GB(2 x 4GB)
DS -
-
8-8-8-24
XMP 1.35V
•
•
•
G.SKILL
F3-12800CL9D-8GBRL(XMP)
8GB(2 x 4GB)
DS -
-
9-9-9-24
1.5V
•
•
•
GEIL
GET316GB1600C9QC(XMP)
16GB(4x 4GB) DS -
-
9-9-9-28
1.6V
•
•
•
GEIL
GV34GB1600C8DC(XMP)
2GB
DS -
-
8-8-8-28
1.6V
•
•
•
KINGMAX
FLGD45F-B8MF7 MAEH(XMP)
1GB
SS
-
-
7
-
•
•
KINGMAX
FLGE85F-B8KJ9A FEIS(XMP)
2GB
DS -
-
-
-
•
•
•
KINGMAX
FLGE85F-B8MF7 MEEH(XMP)
2GB
DS -
-
7
-
•
KINGSTON
KHX1600C9D3P1K2/4G
4GB(2 x 2GB)
SS
-
-
-
1.5V
•
•
•
KINGSTON
KHX1600C9D3K3/12GX(XMP)
12GB(3x4GB)
DS -
-
9-9-9-27
1.65V
•
•
•
(continued on the next page)
2-8
Chapter 2: Hardware information
Paart No.
Size
SS/ Chip
DS Brand
Chip NO.
Timing
Voltage
KINGSTON
KHX1600C9D3T1BK3/
12GX(XMP)
12GB(3x4GB)
DS -
-
9-9-9-27
1.65V
DIMM socket support
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
•
•
KINGSTON
KHX1600C9AD3/2G
2GB
DS -
-
-
1.65V
•
•
•
KINGSTON
KVR1600D3N11/2G-ES
2GB
DS KTC
D1288JPN
DPLD9U
11-11-11-28 1.35V-1.5V •
•
•
KINGSTON
KHX1600C7D3K2/4GX(XMP)
4GB(2x 2GB )
DS -
-
-
1.65V
•
•
•
KINGSTON
KHX1600C8D3K2/4GX(XMP)
4GB(2 x 2GB)
DS -
-
8
1.65V
•
•
•
KINGSTON
KHX1600C8D3T1K2/4GX(XMP)
4GB(2 x 2GB)
DS -
-
8
1.65V
•
•
•
KINGSTON
KHX1600C9D3K2/4GX(XMP)
4GB(2 x 2GB)
DS -
-
9
1.65V
•
•
•
KINGSTON
KHX1600C9D3LK2/4GX(XMP)
4GB(2 x 2GB)
DS -
-
9
XMP 1.35V •
•
•
KINGSTON
KHX1600C9D3X2K2/4GX(XMP)
4GB(2 x 2GB)
DS -
-
9-9-9-27
1.65V
•
•
•
KINGSTON
KHX1600C9D3T1K3/6GX(XMP)
6GB(3x 2GB )
DS -
-
-
1.65V
•
•
•
KINGSTON
KHX1600C9D3K3/6GX(XMP)
6GB(3 x 2GB)
DS -
-
9
1.65V
•
•
•
KINGSTON
KHX1600C9D3T1BK3/6GX
(XMP)
6GB(3 x 2GB)
DS -
-
9-9-9-27
1.65V
•
•
•
KINGSTON
KHX1600C9D3K2/8GX(XMP)
8GB(2 x 4GB)
DS -
-
9-9-9-27
1.65V
•
•
•
KINGSTON
KHX1600C9D3P1K2/8G
8GB(2 x 4GB)
DS -
-
-
1.5V
•
•
•
Super Talent WA160UX6G9
6GB(3 x 2GB)
DS -
-
9
-
•
•
Transcend
JM1600KLN-8GK
8GB(2 x 4GB)
DS Transcend TK483
PCW3
-
-
•
•
•
Asint
SLZ3128M8-EGJ1D(XMP)
2GB
DS Asint
3128M8
-GJ1D
9-9-9-24
1.6V
•
•
•
Elixir
M2P2G64CB8HC9N-DG(XMP)
2GB
DS -
-
-
-
•
•
•
Mushkin
998659(XMP)
6GB(3 x 2GB)
DS -
-
9-9-9-24
1.5~1.6V
•
•
•
Chapter 2
Vendors
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 1333MHz
capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
A-DATA
AD31333001GOU
1GB
SS
A-Data
AD30908C8D-151C
E0906
-
-
DIMM socket support
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
•
•
A-DATA
AD3U1333C2G9
2GB
SS
A-DATA
3CCD-1509HNA1126L
-
-
•
•
•
A-DATA
AD63I1B0823EV
2GB
SS
A-Data
3CCA-1509A
-
-
•
•
•
A-DATA
AM2U139C2P1
2GB
SS
ADATA
3CCD-1509A EL1127T
-
-
•
•
•
A-DATA
AX3U1333C2G9-BP
2GB
SS
-
-
-
-
•
•
•
A-DATA
AD31333G001GOU
3GB
(3 x 1GB)
SS
-
-
8-8-8-24 1.65-1.85V
•
•
•
A-DATA
AXDU1333GC2
G9-2G(XMP)
4GB
(2 x 2GB)
SS
-
-
9-9-9-24 1.25V-1.35V •
(low voltage)
•
•
A-DATA
AD31333G002GMU
2GB
DS
-
-
8-8-8-24 1.65-1.85V
•
•
A-DATA
AD63I1C1624EV
4GB
DS
A-Data
3CCA-1509A
-
-
•
•
•
A-DATA
AM2U139C4P2
4GB
DS
ADATA
3CCD-1509A EL1127T
-
-
•
•
•
A-DATA
SU3U1333W8G9-B
8GB
DS
ELPIDA
J4208BASE-DJ-F
-
-
•
Apacer
78.A1GC6.9L1
2GB
DS
Apacer
AM5D5808DEWSBG
-
-
•
•
•
Apacer
78.A1GC6.9L1
2GB
DS
Apacer
AM5D5808FEQSBG
9
-
•
•
•
Apacer
AU02GFA33C9NBGC
2GB
DS
Apacer
AM5D5808APQSBG
-
-
•
•
•
Apacer
78.B1GDE.9L10C
4GB
DS
Apacer
AM5D5908CEHSBG
-
-
•
•
•
CORSAIR
CM3X1024-1333C9
1GB
SS
-
-
9-9-9-24 1.60V
•
•
•
CORSAIR
TR3X3G1333C9 G
3GB
(3 x 1GB)
SS
-
-
9-9-9-24 1.50V
•
•
•
CORSAIR
TR3X6G1333C9 G
6GB
(3x 2GB)
SS
-
-
9-9-9-24 1.50V
•
•
CORSAIR
CMD24GX3M6A
1333C9(XMP)
24GB
(6 x 4GB)
DS
-
-
9-9-9-24 1.60V
•
•
•
CORSAIR
TW3X4G1333C9D G
4GB
(2 x 2GB)
DS
-
-
9-9-9-24 1.50V
•
•
•
CORSAIR
CM3X4GA1333C9N2
4GB
DS
CORSAIR 256MBDCJ
GELC0401136
9-9-9-24 -
•
•
•
CORSAIR
CMX4GX3M1A1333C9 4GB
DS
-
-
9-9-9-24 1.50V
•
•
•
CORSAIR
CMD8GX3M4A1333C7 8GB
(4 x 2GB)
DS
-
-
7-7-7-20 1.60V
•
•
•
(continued on the next page)
ASUS P8Z77-V LK
2-9
Chapter 2
Vendors
Part No.
Size
SS/
DS
Chip Brand
Chip NO.
Timing
Voltage
Crucial
CT12864BA1339.8FF
1GB
SS
Micron
9FF22D9KPT
9
-
DIMM socket support (Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
•
•
Crucial
CT25664BA1339.16FF
2GB
DS
Micron
9KF27D9KPT
9
-
•
•
•
Crucial
BL25664BN13
37.16FF (XMP)
6GB
(3 x 2GB)
DS
-
-
7-7-7-24
1.65V
•
•
•
ELPIDA
EBJ10UE8EDF0-DJ-F
1GB
SS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low •
voltage)
•
•
ELPIDA
EBJ21UE8EDF0-DJ-F
2GB
DS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low •
voltage)
•
G.SKILL
F3-10600CL8
D-2GBHK(XMP)
1GB
SS
G.SKILL
-
-
-
•
•
•
G.SKILL
F3-10600CL
9D-2GBNQ
2GB
(2 x 1GB)
SS
-
-
9-9-9-24
1.5V
•
•
•
G.SKILL
F3-10666CL7
T-3GBPK(XMP)
3GB
(3 x 1GB)
SS
-
-
7-7-7-18
1.5~1.6V
•
•
•
G.SKILL
F3-10666CL8D4GBECO(XMP)
4GB
(2 x 2GB)
DS
-
-
8-8-8-8-24 XMP
1.35V
•
•
•
G.SKILL
F3-10666CL
7T-6GBPK(XMP)
6GB
(3 x 2GB)
DS
-
-
7-7-7-18
1.5~1.6V
•
•
G.SKILL
F3-10666C
L7D-8GBRH(XMP)
8GB
(2 x 4GB)
DS
-
-
7-7-7-21
1.5V
•
•
•
GEIL
GET316GB1333C9QC
16GB
(4 x 4GB)
DS
-
-
9-9-9-24
1.5V
•
GEIL
GV32GB1333C9DC
2GB
(2 x 1GB)
DS
-
-
9-9-9-24
1.5V
•
•
•
GEIL
GG34GB1333C9DC
4GB
(2 x 2GB)
DS
GEIL
GL1L128M88BA12N
9-9-9-24
1.3V(low
voltage)
•
•
•
GEIL
GV34GB1333C9DC
4GB
(2 x 2GB)
DS
-
-
9-9-9-24
1.5V
•
•
•
GEIL
GVP34GB1333C7DC
4GB
(2 x 2GB)
DS
-
-
7-7-7-24
1.5V
•
•
•
Hynix
HMT112U6TFR8A-H9
1GB
SS
Hynix
H5TC1G83TFRH9A
-
1.35V(low •
voltage)
•
•
Hynix
HMT325U6BFR8C-H9
2GB
SS
Hynix
H5TQ2G83BFRH9C
-
-
•
•
•
Hynix
HMT125U6TFR8A-H9
2GB
DS
Hynix
H5TC1G83TFRH9A
-
1.35V(low •
voltage)
•
•
Hynix
HMT351U6BFR8C-H9
4GB
DS
Hynix
H5TQ2G83BFRH9C
-
-
•
•
•
KINGMAX
FLFD45F-B8KL9 NAES
1GB
SS
KINGMAX
KKB8FNWBFGNX-27A
-
-
•
•
•
KINGMAX
FLFE85F-C8KF9 CAES
2GB
SS
KINGMAX
KFC8FMFXF-DXX-15A
-
-
•
•
•
KINGMAX
FLFE85F-C8KL9 NAES
2GB
SS
KINGMAX
KFC8FNLXF-DXX-15A
-
-
•
•
•
KINGMAX
FLFE85F-C8KM9 NAES 2GB
SS
KINGMAX
KFC8FNMXF-BXX-15A
-
-
•
•
•
KINGMAX
FLFE85F-B8KL9 NEES
2GB
DS
KINGMAX
KKB8FNWBFGNX-26A
-
-
•
•
•
KINGMAX
FLFF65F-C8KL9 NEES
4GB
DS
KINGMAX
KFC8FNLXF-DXX-15A
-
-
•
•
•
KINGMAX
FLFF65F-C8KM9 NEES 4GB
DS
KINGMAX
KFC8FNMXF-BXX-15A
-
-
•
•
•
KINGSTON
KVR1333D3
N9/1G(low profile)
1GB
SS
ELPIDA
J1108BDBG-DJ-F
9
1.5V
•
•
•
KINGSTON
KVR1333D3
N9/2G(low profile)
2GB
SS
Hynix
H5TQ2G83AFRH9C
9
-
•
•
•
KINGSTON
KVR1333D3S8N9/2G
2GB
SS
Micron
IID77 D9LGK
-
1.5V
•
•
•
KINGSTON
KVR1333D3S
8N9/2G-SP(low profile)
2GB
SS
ELPIDA
J2108BCSE-DJ-F
-
1.5V
•
•
•
KINGSTON
KVR1333D3
N9/2G(low profile)
2GB
DS
ELPIDA
J1108BFBG-DJ-F
9
1.5V
•
•
•
KINGSTON
KVR1333D3N9/2G
2GB
DS
KTC
D1288JPNDPLD9U
9
1.5V
•
•
•
KINGSTON
KVR1333D3N9/2G
2GB
DS
ELPIDA
J1108BDSE-DJ-F
9
1.5V
•
•
•
KINGSTON
KVR1333D3
N9/2G-SP(low profile)
2GB
DS
KTC
D1288JEMFNGD9U
-
1.5V
•
•
•
KINGSTON
KVR1333D3N9/2GSP(low profile)
2GB
DS
KINGSTON
D1288JPSFPGD9U
-
1.5V
•
•
•
KINGSTON
KHX1333C7
D3K2/4GX(XMP)
4GB
(2 x 2GB)
DS
-
-
7
1.65V
•
•
•
KINGSTON
KHX1333C9D3UK2/
4GX(XMP)
4GB
(2 x 2GB)
DS
-
-
9
XMP
1.25V
•
KINGSTON
KVR1333D
3N9/4G(low profile)
4GB
DS
ELPIDA
J2108BCSE-DJ-F
9
1.5V
•
•
•
KINGSTON
KVR1333D
3N9/4G(low profile)
4GB
DS
ELPIDA
J2108BCSE-DJ-F
-
1.5V
•
•
•
KINGSTON
KVR1333D3N9/4G
4GB
DS
KTC
D2568JENCNGD9U
-
1.5V
•
•
•
KINGSTON
KVR1333D3N9/4G
4GB
DS
Hynix
H5TQ2G83AFR
-
-
•
•
•
KINGSTON
KVR1333D3N9/4GSP(low profile)
4GB
DS
KINGSTON
D2568JENCPGD9U
-
1.5V
•
•
•
Micron
MT4JTF12864AZ1G4D1
1GB
SS
Micron
OJD12D9LGQ
-
-
•
•
•
Micron
MT8JTF12864AZ1G4F1
1GB
SS
Micron
9FF22D9KPT
9
-
•
•
•
(continued on the next page)
2-10
Chapter 2: Hardware information
Vendors
Part No.
Size
SS/
DS
Chip Brand Chip NO.
Timing
Voltage
Micron
MT8JTF25664AZ1G4D1
2GB
SS
Micron
OJD12D9LGK
-
-
DIMM socket support
(Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
•
•
Micron
MT8JTF25664AZ1G4M1
2GB
SS
MICRON
IJM22 D9PFJ
-
-
•
•
•
Micron
MT16JTF25664AZ1G4F1
2GB
DS
Micron
9KF27D9KPT
9
-
•
•
•
Micron
MT16JTF51264AZ1G4D1
4GB
DS
Micron
OLD22D9LGK
-
-
•
•
•
NANYA
NT4GC64B8HG0NFCG
4GB
DS
NANYA
NT5CB256M8GN-CG
-
-
•
•
•
PSC
AL7F8G73F-DJ2
1GB
SS
PSC
A3P1GF3FGF
-
-
•
•
•
PSC
AL8F8G73F-DJ2
2GB
DS
PSC
A3P1GF3FGF
-
-
•
•
•
SAMSUNG
M378B2873FHS-CH9
1GB
SS
SAMSUNG
K4B1G0846F
-
-
•
•
•
SAMSUNG
M378B5773DH0-CH9
2GB
SS
SAMSUNG
K4B2G0846D
-
-
•
•
•
SAMSUNG
M378B5673FH0-CH9
2GB
DS
SAMSUNG
K4B1G0846F
-
-
•
•
•
SAMSUNG
M378B5273CH0-CH9
4GB
DS
SAMSUNG
K4B2G0846C
-
-
•
•
•
SAMSUNG
M378B1G73AH0-CH9
8GB
DS
SAMSUNG
K4B4G0846A-HCH9
-
-
•
•
Super Talent
W1333UA1GH
1GB
SS
Hynix
H5TQ1G83TFR
9
-
•
•
Super Talent
W1333UX2G8(XMP)
2GB
(2x 1GB)
SS
-
-
8
-
•
•
Super Talent
W1333UB2GS
2GB
DS
SAMSUNG
K4B1G0846F
9
-
•
•
•
Super Talent
W1333UB4GS
4GB
DS
SAMSUNG
K4B2G0846C
-
-
•
•
•
Super Talent
W1333UX6GM
6GB
(3x 2GB)
DS
Micron
0BF27D9KPT
9-9-9-24 1.5V
•
•
•
Transcend
JM1333KLN-2G
2GB
SS
Micron
0YD77D9LGK
-
-
•
•
•
Transcend
JM1333KLN-2G
2GB
SS
Hynix
H5TQ2G83BZRH9C
-
-
•
•
•
Transcend
JM1333KLU-2G
2GB
DS
Transcend
TK243PDF3
-
-
•
•
•
Transcend
TS256MLK64V3U
2GB
DS
Micron
9GF27D9KPT
-
-
•
•
Century
PC3-10600 DDR3
-1333 9-9-9
1GB
SS
NANYA
NT5CB128M8DN-CF
-
-
•
•
Elixir
M2F2G64CB88D7N-CG 2GB
SS
Elixir
N2CB2G80DN-CG
-
-
•
•
Elixir
M2F2G64CB88G7NCG
2GB
SS
Elixir
N2CB2G80GN-CG
-
-
•
•
Elixir
M2F4G64CB8HB5NCG
4GB
DS
Elixir
N2CB2G80BN-CG
-
-
•
•
Elixir
M2F4G64CB8HD5NCG
•
•
4GB
DS
Elixir
N2CB2G80DN-CG
-
-
•
•
KINGSHARE KSRPCD313332G
2GB
DS
PATRIOT
PM128M8D385-15
-
-
•
•
KINGSTEK
KSTD3PC-10600
2GB
SS
MICRON
PE911-125E
-
-
•
•
Kingtiger
2GB DIMM PC3-10666
2GB
DS
SAMSUNG
SEC 904 HCH9
K4B1G0846D
-
-
•
•
•
MARKVI
SION
BMD32048M
1333C9-1123
2GB
DS
MARKVI
SION
M3D1288P-13
-
-
•
•
•
MARKVI
SION
BMD34096M
1333C9-1124
4GB
DS
MARKVI
SION
M3D2568E-13
-
-
•
•
•
PATRIOT
PSD31G13332H
1GB
DS
-
-
9
-
•
PATRIOT
PSD31G13332
1GB
DS
PATRIOT
PM64M8D38U-15
-
-
•
•
PATRIOT
PSD32G13332H
2GB
DS
-
-
-
-
•
•
•
RAMAXEL
RMR1870ED48
E8F-1333
2GB
DS
ELPIDA
J1108BDBG-DJ-F
-
-
•
•
•
RAMAXEL
RMR1870EC58
E9F-1333
4GB
DS
ELPIDA
J2108BCSE-DJ-F
-
-
•
•
•
RiDATA
C304627CB1AG22Fe
2GB
DS
RiDATA
N/A
9
-
•
•
•
RiDATA
E304459CB1AG32Cf
4GB
DS
RiDATA
N/A
9
-
•
•
•
SILICON
POWER
SP001GBLTU133S01
1GB
SS
NANYA
NT5CB128M8AN-CG
9
-
•
•
•
SILICON
POWER
SP001GBLTU133S02
1GB
SS
Elixir
N2CB1680AN-C6
9
-
•
•
•
SILICON
POWER
SP002GBLTU133S02
2GB
DS
Elixir
N2CB1680AN-C6
9
-
•
•
•
TAKEMS
TMS1GB364D081107EY
1GB
SS
-
-
7-7-7-20 1.5V
•
•
TAKEMS
TMS1GB364D081138EY
1GB
SS
-
-
8-8-8-24 1.5V
•
•
TAKEMS
TMS2GB364D081107EY
2GB
DS
-
-
7-7-7-20 1.5V
•
•
TAKEMS
TMS2GB364D081138EY
2GB
DS
-
-
8-8-8-24 1.5V
•
•
TAKEMS
TMS2GB364D082138EW
2GB
DS
-
-
8-8-8-24 1.5V
•
•
UMAX
E41302GP0-73BDB
2GB
DS
UMAX
U2S24D30TP-13
-
-
•
•
•
WINTEC
3WVS31333-2G-CNR
2GB
DS
AMPO
AM3420803-13H
-
-
•
•
•
ASUS P8Z77-V LK
Chapter 2
•
•
2-11
P8Z77-V LK Motherboard Qualified Vendors Lists (QVL) DDR3 1066MHz
capability
Vendors
Part No.
Size SS/
DS
Chip
Brand
Chip NO.
Timing Voltage
Crucial
CT12864BA1067.8FF
1GB SS
Micron
9GF22D9KPT
7
-
DIMM socket support (Optional)
1 DIMM 2 DIMMs 4 DIMMs
•
•
•
Crucial
CT25664BA1067.16FF
2GB DS
Micron
9HF22D9KPT
7
-
•
•
•
ELPIDA
EBJ10UE8EDF0-AE-F
1GB SS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low voltage) •
•
•
ELPIDA
EBJ21UE8EDF0-AE-F
2GB DS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low voltage) •
•
•
KINGSTON KVR1066D3N7/1G (low 1GB SS
profile)
ELPIDA
J1108BFSE-DJ-F
7
1.5V
•
•
•
KINGSTON KVR1066D3N7/2G
2GB DS
ELPIDA
J1108BDSE-DJ-F
7
1.5V
•
•
•
KINGSTON KVR1066D3N7/4G
4GB DS
Hynix
H5TQ2G83AFR
7
1.5V
•
•
•
Micron
MT8JTF12864AZ1G1F1
1GB SS
Micron
9GF22D9KPT
7
-
•
•
•
Micron
MT16JTF25664AZ1G1F1
2GB DS
Micron
9HF22D9KPT
7
-
•
•
•
Kingtiger
2GB DIMM PC3-8500
2GB DS
Hynix
H5TQ1G83AFP
G7C
-
-
•
•
•
Chapter 2
Side(s): SS - Single-sided DS - Double-sided
DIMM support:
•
•
•
2-12
1 DIMM: Supports one (1) module inserted into any slot as Single-channel memory
configuration. We suggest that you install the module into A2 slot.
2 DIMMs: Supports two (2) modules inserted into either the blue slots or the black slots
as one pair of Dual-channel memory configuration. We suggest that you
install the modules into slots A2 and B2 for better compatibility.
4 DIMMs: Supports four (4) modules inserted into both the blue and black slots as two
pairs of Dual-channel memory configuration.
•
ASUS exclusively provides hyper DIMM support function.
•
Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load
the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.
•
Visit the ASUS website for the latest QVL.
Chapter 2: Hardware information
2.2.4
Expansion slots
Ensure to unplug the power cord before adding or removing expansion cards. Failure to do
so may cause you physical injury and damage motherboard components.
Chapter 2
LGA1155
1
2
P8Z77-V LK
3
4
5
6
7
Slot No.
Slot Description
1
PCIe 2.0 x1_1 slot
2
PCIe 3.0/2.0 x16_1 slot [blue] (single at x16 or dual at x8 / x8 mode)
3
PCIe 2.0 x1_2 slot
4
PCI slot_1
5
PCIe 3.0/2.0 x16_2 slot [gray] (single at x16 or dual at x8 / x8 mode)
6.
PCI slot_2
7.
PCIe 2.0 x16_3 slot [black] (at x4 mode)
VGA configuration
PCI Express operating mode
PCIe 3.0/2.0 x16_1
PCIe 3.0/2.0 x16_2
Single VGA/PCIe card
x16
(Recommend for single VGA)
N/A
Dual VGA/PCIe card
x8
x8
ASUS P8Z77-V LK
2-13
•
In single VGA card mode, use the PCIe 3.0/2.0 x16_1 slot (blue) for a PCI Express x16
graphics card to get better performance.
•
In CrossFireX™ or SLI™ mode, use the PCIe 3.0/2.0 x16_1 and PCIe 3.0/2.0 x16_2
slots for PCI Express x16 graphics cards to get better performance.
•
We recommend that you provide sufficient power when running CrossFireX™ mode.
•
Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2/3 when using
multiple graphics cards for better thermal environment. See page 2-22 for details.
IRQ assignments for this motherboard
Chapter 2
Audio Controller
EHCI Controller
XHCI Controller
SATA Controller
PCIE x16_1
PCIE x16_2
PCIE x16_3
PCIE x1_1
PCIE x1_2
ASM1042
PCI Slot 1
PCI Slot 2
2-14
A
–
–
shared
–
shared
shared
–
–
–
–
–
–
B
–
–
–
–
–
–
shared
–
–
–
shared
–
C
–
–
–
–
–
–
–
shared
–
–
–
shared
D
–
–
–
shared
–
–
–
–
shared
shared
–
–
E
–
–
–
–
–
–
–
–
–
–
–
–
F
–
–
–
–
–
–
–
–
–
–
–
–
G
shared
–
–
–
–
–
–
–
–
–
–
–
H
–
shared
–
–
–
–
–
–
–
–
–
–
Chapter 2: Hardware information
2.2.5
Jumper
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the
CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM
data. The onboard button cell battery powers the RAM data in CMOS, which include system
setup information such as system passwords.
CLRTC
P8Z77-V LK
1
2
2
3
Normal
(Default)
Clear RTC
Chapter 2
P8Z77-V LK Clear RTC RAM
To erase the RTC RAM
1.
Turn OFF the computer and unplug the power cord.
2.
Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for
about 5–10 seconds, then move the cap back to pins 1-2.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the &lt;Del&gt; key during the boot process and enter BIOS setup to
re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
•
If the steps above do not help, remove the onboard battery and move the jumper again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
•
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.
Shut down and reboot the system so the BIOS can automatically reset parameter
settings to default values.
ASUS P8Z77-V LK
2-15
2.2.6
Onboard switches
Onboard switches allow you to fine-tune performance when working on a bare or open-case
system. This is ideal for overclockers and gamers who continually change settings to enhance
system performance.
1.
MemOK! switch
Installing DIMMs that are incompatible with the motherboard may cause system
boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press
and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic
memory compatibility tuning for successful boot.
Chapter 2
P8Z77-V LK
P8Z77-V LK MemOK! switch
2-16
•
Refer to section 2.2.7 Onboard LEDs for the exact location of the DRAM_LED.
•
The DRAM_LED also lights when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
•
The MemOK! switch does not function under Windows&reg; OS environment.
•
During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
•
Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
•
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
•
If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A message will appear during POST reminding you
that the BIOS has been restored to its default settings.
•
We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
Chapter 2: Hardware information
2.
GPU Boost switch
Turning this switch to Enable will automatically optimize the system for fast, yet stable
clock speeds.
GPU Boost
P8Z77-V LK
P8Z77-V LK GPU Boost switch
3.
•
The GPU LED near the GPU switch lights when the switch setting is turned to Enable.
Refer to section 2.2.7 Onboard LEDs for the exact location of the GPU LED.
•
If you change the switch setting to Enable under the OS environment, the GPU function
will be activated after the next system bootup.
Chapter 2
•For ensuring the system performance, turn the switch setting to Enable when the
system is powered off.
EPU switch
Turning this switch to Enable will automatically detect the current PC loadings and
intelligently moderate the power consumption.
For ensuring the system performance, turn the switch setting to Enable when the system
is powered off.
P8Z77-V LK
EPU Boost
P8Z77-V LK EPU Boost switch
•
The EPU LED near the EPU switch lights when the switch setting is turned to Enable.
Refer to section 2.2.7 Onboard LEDs for the exact location of the EPU LED.
•
If you change the switch setting to Enable under the OS environment, the EPU
function will be activated after the next system bootup.
•
You may change the EPU settings in the software application or BIOS setup program,
and enable the EPU function at the same time. However, the system will use the last
setting you have made.
ASUS P8Z77-V LK
2-17
2.2.7
1.
Onboard LEDs
Standby Power LED
The motherboard comes with a standby power LED. The green LED lights up to indicate
that the system is ON, in sleep mode, or in soft‑off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
SB_PWR
P8Z77-V LK
Chapter 2
ON
Standby Power
OFF
Powered Off
P8Z77-V LK Onboard LED
2.
DRAM LED
DRAM LED checks the DRAM in sequence during motherboard booting process. If an
error is found, the LED next to the error device will continue lighting until the problem is
solved. This user-friendly design provides an intuitional way to locate the root problem
within a second.
DRAM LED
P8Z77-V LK
P8Z77-V LK DRAM LED
2-18
Chapter 2: Hardware information
3.
GPU Boost LED
The GPU Boost LED lights when the GPU Boost switch is turned to Enable.
GPU LED
P8Z77-V LK
4.
Chapter 2
P8Z77-V LK GPU Boost LED
EPU LED
The EPU LED lights when the EPU switch is turned to Enable.
P8Z77-V LK
EPU_LED
P8Z77-V LK EPU LED
ASUS P8Z77-V LK
2-19
2.2.8
1.
Internal connectors
Intel&reg; Z77 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
Chapter 2
SATA6G_2
SATA6G_1
GND
RSATA_RXP1
RSATA_RXN1
GND
RSATA_TXN1
RSATA_TXP1
GND
P8Z77-V LK
GND
RSATA_RXP2
RSATA_RXN2
GND
RSATA_TXN2
RSATA_TXP2
GND
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel&reg; Rapid Storage Technology through the onboard Intel&reg; Z77
chipset.
P8Z77-V LK SATA 6.0Gb/s connectors
•
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.5.3 SATA Configuration for details.
•
Before creating a RAID set, refer to section 4.4 RAID configurations or the manual
bundled in the motherboard support DVD.
When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section
3.5.3 SATA Configuration for details.
•
•
2.
You must install Windows&reg; XP Service Pack 3 or later versions before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows&reg; XP SP3 or later versions.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
PIN 1
DCD
TXD
GND
RTS
RI
RXD
DTR
DSR
CTS
COM1
P8Z77-V LK
P8Z77-V LK Serial port (COM1) connector
The COM module is purchased separately.
2-20
Chapter 2: Hardware information
3.
USB 2.0 connectors (10-1 pin USB 3 ~ 10)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these
connectors, then install the module to a slot opening at the back of the system chassis.
These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
USB34
USB+5V
USB_P4USB_P4+
GND
NC
USB+5V
USB_P8USB_P8+
GND
NC
USB56
USB+5V
USB_P6USB_P6+
GND
NC
USB78
USB+5V
USB_P10USB_P10+
GND
NC
USB910
Chapter 2
PIN 1
USB+5V
USB_P3USB_P3+
GND
PIN 1
USB+5V
USB_P5USB_P5+
GND
PIN 1
USB+5V
USB_P7USB_P7+
GND
PIN 1
USB+5V
USB_P9USB_P9+
GND
P8Z77-V LK
P8Z77-V LK USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
4.
Front panel audio connector (10-1 pin AAFP)
NC
AGND
NC
NC
SENSE2_RETUR
AGND
NC
SENSE1_RETUR
This connector is for a chassis-mounted front panel audio I/O module that supports either
HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O
module cable to this connector.
AAFP
HD-audio-compliant
pin definition
PIN 1
MIC2
MICPWR
Line out_R
NC
Line out_L
P8Z77-V LK
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
PIN 1
Legacy AC’97
compliant definition
P8Z77-V LK Front panel audio connector
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Select item in the BIOS setup to [HD Audio]; if you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC 97]. By default, this
connector is set to [HD]. Refer to 3.6.6 Onboard Devices Configuration for details.
ASUS P8Z77-V LK
2-21
5.
Digital audio connector (4-1 pin SPDIF_OUT)
P8Z77-V LK
SPDIFOUT
GND
+5V
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot opening
at the back of the system chassis.
SPDIF_OUT
P8Z77-V LK Digital audio connector
Chapter 2
The S/PDIF module is purchased separately.
6.
CPU, chassis, and power fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2/3)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the black
wire of each cable matches the ground pin of the connector.
GND
CHA FAN PWR
CHA FAN IN
CHA FAN PWM
1
2
3 CPU_FAN
2 CHA_FAN1
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
1 CHA_FAN3
4 CHA_FAN2
3
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
4
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
P8Z77-V LK
P8Z77-V LK fan connectors
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
2-22
Chapter 2: Hardware information
7.
USB 3.0 connector (20-1 pin USB3_34)
These connectors are for the additional USB 3.0 ports, and complies with the USB 3.0
specificaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel
cable is available from your system chassis, with this USB 3.0 connector, you can have
a front panel USB 3.0 solution.
USB3_34
P8Z77-V LK
Chapter 2
P8Z77-V LK USB3.0 Front panel connector
You can connect the ASUS front panel USB 3.0 bracket to this connector to obtain the front
panel USB 3.0 solution.
8.
Intel&reg; Z77 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1–4 [blue])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc drives
via Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel&reg; Rapid Storage Technology through the onboard Intel&reg; Z77
chipset.
GND
RSATA_RXP2
RSATA_RXN2
GND
RSATA_TXN2
RSATA_TXP2
GND
GND
RSATA_RXP1
RSATA_RXN1
GND
RSATA_TXN1
RSATA_TXP1
GND
SATA3G_4
SATA3G_3
GND
RSATA_RXP3
RSATA_RXN3
GND
RSATA_TXN3
RSATA_TXP3
GND
SATA3G_1
GND
RSATA_RXP4
RSATA_RXN4
GND
RSATA_TXN4
RSATA_TXP4
GND
P8Z77-V LK
SATA3G_2
P8Z77-V LK SATA 3.0Gb/s connectors
•
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode].
Refer to section 3.5.3 SATA Configuration for details.
•
When using NCQ, please check the SATA Mode in the BIOS is [AHCI Mode]. Refer to
3.5.3 SATA Configuration for details.
•
You must install Windows&reg; XP Service Pack 3 or later versions before using Serial ATA
hard disk drives. The Serial ATA RAID feature is available only if you are using Windows&reg;
XP SP3 or later versions.
•
Before creating a RAID set, refer to .section 4.5 RAID Configurations or the manual
bundled in the motherboard support DVD.
ASUS P8Z77-V LK
2-23
9.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are designed
to fit these connectors in only one orientation. Find the proper orientation and push down
firmly until the connectors completely fit.
EATX12V
EATXPWR
PIN 1
+12V DC
+12V DC
+12V DC
+12V DC
P8Z77-V LK
+3 Volts
GND
+12 Volts
GND
+12 Volts
GND
GND +5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
PIN 1
P8Z77-V LK ATX power connectors
Chapter 2
2-24
•
For a fully configured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum
power of 450 W.
•
Do not forget to connect the 4-pin / 8-pin EATX12 V power plug; otherwise, the system
will not boot.
•
We recommend that you use a PSU with higher power output when configuring a system
with more power-consuming devices. The system may become unstable or may not boot
up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
Chapter 2: Hardware information
11.
System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
+5V
Ground
Ground
Speaker
SPEAKER
PLED-
PLED+
PLED
PANEL
IDE_LED
PWRSW
Reset
Ground
PWR
Ground
P8Z77-V LK
IDE_LED+
IDE_LED-
PIN 1
RESET
* Requires an ATX power supply
P8Z77-V LK System panel connector
System power LED (2-pin PLED)
Chapter 2
•
This 2-pin connector is for the system power LED. Connect the chassis power LED cable
to this connector. The system power LED lights up when you turn on the system power,
and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
•
ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power button turns the
system on or puts the system in sleep or soft-off mode depending on the BIOS settings.
Pressing the power switch for more than four seconds while the system is ON turns the
system OFF.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
ASUS P8Z77-V LK
2-25
2.3
Building your computer system
2.3.1
Additional tools and components to build a PC system
Chapter 2
1 bag of screws
Philips (cross) screwdriver
PC chassis
Power supply unit
Intel LGA 1155 CPU
Intel LGA1155 compatible CPU Fan
DIMM
SATA hard disk drive
SATA optical disc drive (optional)
Graphics card (optional)
The tools and components in the table above are not included in the motherboard package.
2-26
Chapter 2: Hardware information
2.3.2
CPU installation
Chapter 2
The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a LGA1156
CPU on the LGA1155 socket.
1
A
B
2
ASUS P8Z77-V LK
2-27
3
4
C
A
Chapter 2
B
5
2-28
Chapter 2: Hardware information
2.3.3
CPU heatsink and fan assembly installation
Apply the Thermal Interface Material
to the CPU heatsink and CPU
before you install the heatsink and
fan if necessary.
1
Chapter 2
To install the CPU heatsink and fan assembly
2
A
B
B
A
3
ASUS P8Z77-V LK
4
2-29
To uninstall the CPU heatsink and fan assembly
1
Chapter 2
2
A
B
B
A
2-30
Chapter 2: Hardware information
2.3.4
DIMM installation
1
Chapter 2
2
3
To remove a DIMM
B
A
A
ASUS P8Z77-V LK
2-31
2.3.5
Motherboard installation
The diagrams in this section are for reference only. The motherboard layout may vary with
models, but the installation steps remain the same.
1
Chapter 2
2
2-32
Chapter 2: Hardware information
Chapter 2
3
P8Z77-V LK
DO NOT overtighten the screws! Doing so can damage the motherboard.
ASUS P8Z77-V LK
2-33
2.3.6
ATX Power connection
1
Chapter 2
2
OR
2-34
Chapter 2: Hardware information
2.3.7
SATA device connection
1
Chapter 2
OR
2
ASUS P8Z77-V LK
2-35
2.3.8
Front I/O Connector
To install USB 2.0 Connector
To install front panel audio connector
AAFP
USB 2.0
Chapter 2
To install USB 3.0 Connector
USB 3.0
2-36
Chapter 2: Hardware information
2.3.9
Expansion Card installation
Chapter 2
To install PCIe x16 cards
To install PCIe x1 cards
ASUS P8Z77-V LK
To install PCI cards
2-37
2.3.10
Rear panel connection
1
2
11
10
3
9
5
4
7
8
6
Chapter 2
Rear panel connectors
1.
PS/2 Keyboard/Mouse COMBO port
7.
USB 3.0 ports 1 and 2
2.
Optical S/PDIF Out port
8.
DVI port
3.
Video Graphics Adapter (VGA) port
9.
HDMI port
4.
Realtek&reg; LAN (RJ-45) port*
10. DisplayPort
5.
Audio I/O ports**
11. USB 2.0 ports 1 and 2
6.
USB 3.0 ports E_12
* and **: Refer to the tables on the next page for LAN port LED and audio port definitions.
•
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows&reg; OS environment and after the USB 3.0 driver installation.
•
USB 3.0 devices can only be used as data storage only.
•
We strong recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and
better performance for your USB 3.0 devices.
•
This motherboard comes with multiple VGA output that features desktop extension on two
monitors. You can connect two monitors to any two of the onboard VGA, DisplayPort,
DVI-D, and HDMI ports.
DVI-D cannot be converted to output RGB signal to CRT and is not compatible with
DVI-I.
•
2-38
Chapter 2: Hardware information
* LAN port LED indications
Activity Link LED
Speed LED
Status
Description
Status
Description
OFF
No link
OFF
10 Mbps connection
ORANGE
Linked
ORANGE
100 Mbps connection
BLINKING
Data activity
GREEN
1 Gbps connection
ACT/LINK SPEED
LED
LED
LAN port
Port
Headset
2-channel
4-channel
6-channel
8-channel
Light Blue
Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink
Mic In
Mic In
Mic In
Mic In
Orange
–
–
Center/Subwoofer
Center/Subwoofer
Black
–
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Gray
–
–
–
Side Speaker Out
ASUS P8Z77-V LK
Chapter 2
** Audio 2, 4, 6, or 8-channel configuration
2-39
2.3.11
Audio I/O connections
Audio I/O ports
Connect to Headphone and Mic
Chapter 2
Connect to Stereo Speakers
Connect to 2.1-channel Speakers
2-40
Chapter 2: Hardware information
Connect to 4.1 channel Speakers
Chapter 2
Connect to 5.1 channel Speakers
Connect to 7.1 channel Speakers
ASUS P8Z77-V LK
2-41
2.4
Starting up for the first time
Chapter 2
1.
After making all the connections, replace the system case cover.
2.
Be sure that all switches are off.
3.
Connect the power cord to the power connector at the back of the system chassis.
4.
Connect the power cord to a power outlet that is equipped with a surge protector.
5.
Turn on the devices in the following order:
a.
Monitor
b.
External SCSI devices (starting with the last device on the chain)
c.
System power
6.
After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests or POST. While the tests are running, the
BIOS beeps (see the BIOS beep codes table below) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
7.
BIOS Beep
Description
One short beep
VGA detected
Quick boot set to disabled
No keyboard detected
One continuous beep followed by two short
beeps then a pause (repeated)
No memory detected
One continuous beep followed by three short
beeps
No VGA detected
One continuous beep followed by four short
beeps
Hardware component failure
At power on, hold down the &lt;Delete&gt; key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
2.5
Turning off the computer
While the system is ON, pressing the power switch for less than four seconds puts the system
on sleep mode or soft-off mode, depending on the BIOS setting. Pressing the power switch
for more than four seconds lets the system enter the soft-off mode regardless of the BIOS
setting.
2-42
Chapter 2: Hardware information
Chapter 3
Chapter 3:
3.1
Knowing BIOS
BIOS setup
The ASUS UEFI BIOS offers a user-friendly interface that goes beyond traditional
keyboard-only BIOS controls to enable more flexible and convenient mouse input. Users
can easily navigate the UEFI BIOS with the same smoothness as their operating system.
The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot device
configuration that are needed for system startup in the motherboard CMOS. In normal
circumstances, the default BIOS settings apply to most conditions to ensure optimum
performance. We recommend that you not change the default BIOS settings except in
the following circumstances:
•
An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
•
You have installed a new system component that requires further BIOS settings or
update.
Inappropriate settings of the BIOS may result to instability or failure to boot. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.
3.2
BIOS setup program
A BIOS setup program is provided for BIOS item modification. When you start up the
computer, the system provides you with the opportunity to run this program. Press &lt;Del&gt;
during the Power-On Self-Test (POST) to enter the Setup utility. Otherwise, POST continues
with its test routines.
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
•
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
•
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu. See section 3.9 Exit Menu for details.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 2.2.5 Jumper for information
on how to erase the RTC RAM.
•
The BIOS setup program does not support the bluetooth devices.
Chapter 3
If you wish to enter Setup after POST, press &lt;Ctrl&gt; + &lt;Alt&gt; + &lt;Delete&gt;, or press the reset
button on the system chassis to restart the system. You can also turn the system off and then
turn it back on to restart the system. Do this last option only if the first two failed.
The BIOS setup program is designed to make it as easy to use as possible. Being a
menu-driven program, it lets you scroll through the various submenus and select from the
available options using a keyboard or a USB mouse.
The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the
EZ Mode/Advanced Mode screen.
ASUS P8Z77-V LK
3-1
3.2.1
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 3.7 Boot memu for details.
Clicks to display all fan
speeds if available
Selects the display language of
the BIOS setup program
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output,
CPU/chassis/power fan speed
Exits the BIOS setup program without saving
the changes, saves the changes and resets the
system, or enters the Advanced Mode
EFI BIOS Utility - EZ Mode
Exit/Advanced Mode
P8Z77-V LK
English
BIOS Version : 0204
CPU Type : Genuine Intel(R) CPU @ 2.90GHz
Monday [9/13/2010]
Speed : 2900 MHz
Total Memory : 1024 MB (DDR3 1033MHz)
Temperature
Voltage
CPU
+113.0&ordm;F/+45.0&ordm;C
CPU
1.248V
5V
MB
+75.2&ordm;F/+40.0&ordm;C
3.3V
3.344V
12V
5.160V
12.248V
Fan Speed
CPU_FAN
CHA_FAN2
3325RPM
CHA_FAN1
N/A
N/A
CHA_FAN3
N/A
System Performance
Quiet
Chapter 3
Performance
Energy Saving
Normal
Boot Priority
Use the mouse to drag or keyboard to navigate to decide the boot priority.
Shortcut (F3)
Advanced Mode (F7)
Boot Menu(F8)
Default(F5)
Displays the
Loads optimized default
Power Saving mode
Advanced mode
menus
Displays the system
Normal mode
ASUS Optimal mode
properties of the selected
Selects
the
boot
device
priority
mode on the right hand side
Selects the Advanced
Selects the
boot device
priority
mode functions
3-2
•
The boot device options vary depending on the devices you installed to the system.
•
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
Chapter 3: BIOS setup
3.2.2
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the Advanced Mode, click Exit, then select Advanced Mode.
Menu items
Menu bar
Configuration fields
Pop-up window
Submenu item
General help
Chapter 3
Back button
Navigation keys
Menu bar
The menu bar on top of the screen has the following main items:
Main
Ai Tweaker
For changing the basic system configuration
For changing the overclocking settings
Advanced
For changing the advanced system settings
Monitor
For displaying the system temperature, power status, and changing the
fan settings.
Boot
For changing the system boot configuration
Tool
Exit
For configuring options for special functions
For selecting the exit options and loading default settings
ASUS P8Z77-V LK
3-3
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have
their respective menu items.
Back button
This button appears when entering a submenu. Press &lt;Esc&gt; or use the USB mouse to click
this button to return to the previous menu screen.
Submenu items
A greater than sign (&gt;) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press &lt;Enter&gt;.
Pop-up window
Select a menu item and press &lt;Enter&gt; to display a pop-up window with the configuration
options for that item.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or &lt;Page Up&gt; / &lt;Page Down&gt; keys to display the
other items on the screen.
Navigation keys
Chapter 3
At the bottom right corner of the menu screen are the navigation keys for the BIOS setup
program. Use the navigation keys to select items in the menu and change the settings.
General help
At the top right corner of the menu screen is a brief description of the selected item. Use
&lt;F12&gt; key to capture the BIOS screen and save it to the removable storage device.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press &lt;Enter&gt; to display a list of options.
3-4
Chapter 3: BIOS setup
3.3
Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Exit
Advanced
Monitor
Tool
Choose the system default language
BIOS Information
BIOS Version
Build Date
ME Version
South Bridge Stepping
0204 x64
02/22/2012
8.0.2.1410
C1
CPU Information
Genuine Intel(R) CPU 0 @ 2.90GHz
Speed
2900 MHz
Memory Information
Total Memory
Memory Frequency
1024 MB (DDR3)
1333 MHz
System Language
System Date
System Time
Access Level
Boot
English
[Fri 11/08/2011]
[16:46:15]
Administrator
&gt; Security
Security
The Security menu items allow you to change the system security settings.
EFI BIOS Utility - Advanced Mode
Advanced
Monitor
Boot
Chapter 3
Ai Tweaker
Main
Back
Exit
Tool
Main\ Security &gt;
Password Description
To clear the administrator password,
key in the current password in the
Enter Current Password box,
and then press &lt;Enter&gt; when
prompted to create/confirm the
password.
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights
Administrator Password
User Password
Not Installed
Not Installed
Administrator Password
User Password
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 2.2.5 Jumper for information on how to
erase the RTC RAM.
•
The Administrator or User Password items on top of the screen show the default
Not Installed. After you set a password, these items show Installed.
ASUS P8Z77-V LK
3-5
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator
password for accessing the system. Otherwise, you might be able to see or change only
selected fields in the BIOS setup program.
To set an administrator password:
1.
Select the Administrator Password item and press &lt;Enter&gt;.
2.
From the Create New Password box, key in a password, then press &lt;Enter&gt;.
3.
Confirm the password when prompted.
To change an administrator password:
1.
Select the Administrator Password item and press &lt;Enter&gt;.
2.
From the Enter Current Password box, key in the current password, then press
&lt;Enter&gt;.
3.
From the Create New Password box, key in a new password, then press &lt;Enter&gt;.
4.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press &lt;Enter&gt; when prompted to create/confirm the password. After you clear
the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
Chapter 3
To set a user password:
1.
Select the User Password item and press &lt;Enter&gt;.
2.
From the Create New Password box, key in a password, then press &lt;Enter&gt;.
3.
Confirm the password when prompted.
To change a user password:
1.
Select the User Password item and press &lt;Enter&gt;.
2.
From the Enter Current Password box, key in the current password, then press
&lt;Enter&gt;.
3.
From the Create New Password box, key in a new password, then press &lt;Enter&gt;.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
&lt;Enter&gt; when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
3-6
Chapter 3: BIOS setup
3.4
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
Chapter 3
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display the following items:
ASUS P8Z77-V LK
3-7
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
[Manual]
[X.M.P.]
Loads the optimal settings for the system.
Allows you to individually set overclocking parameters.
If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by your
memory modules for optimizing the system performance.
BCLK/PEG Frequency [XXX]
This item appears only when you set the previous item to [Manual] and sllows you to adjust
the CPU and VGA frequency to enhance the system performance. Use the &lt;+&gt; and &lt;-&gt; keys
to adjust the value. You can also key in the desired value using the numeric keypad. The
values range from 80.0MHz to 300.0MHz.
eXtreme Memory Profile
This item appears only when you set the Ai Overclocking Tuner item to [X.M.P.] and
allows you to select the X.M.P. mode supported by your memory module. Configuration
options: [Profile #1] [ Profile #2]
Turbo Ratio [Auto]
Allows you to manually adjust the Trubo CPU ratio.
[Auto]
All Turbo ratio are set by Intel CPU default settings.
[Manual]
Sets the Turbo Ratio for every core-activation condition of a full unlocked
CPU manually.
When the Turbo Ratio is set to [Manual], the following item appears:
Chapter 3
Ratio Synchronizing Control [Enabled]
[Enabled] Allows you to set an individual Turbo Ratio for every core-activation
condition.
[Disabled] Allows you to set one single Turbo Ratio for all core-activation conditions.
1-Core Ratio Limit [Auto]
This item appears only when you set the Turbo Ratio item to [Manual]. Use the &lt;+&gt;
and &lt;-&gt; keys to adjust the value.
2-/3-/4-Core Ratio Limit [Auto]
These items appear only when you set the Turbo Ratio item to [Manual] and Ratio
Synchronizing Control item to [Disabled]. Use the &lt;+&gt; and &lt;-&gt; keys to adjust the
value.
Internal PLL Overvoltage [Auto]
Allows you to set the Internal PLL Overvoltage. Configuration options: [Auto] [Enabled]
[Disabled].
CPU bus speed : DRAM speed ratio mode [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto]
[100:133]
[100:100]
3-8
DRAM speed is set to the optimized settings.
The CPU bus speed to DRAM speed ratio is set to 100:133.
The CPU bus speed to DRAM speed ratio is set to 100:100.
Chapter 3: BIOS setup
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK/PCIE Frequency item settings.
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
iGPU Max. Frequency [xxx]
Allows you to set the iGPU maximum frequency. The values range from xxxxMHz (by CPU)
to 3000MHz with a 50MHz interval. Use &lt;+&gt;/&lt;-&gt; to adjust the value.
EPU Power Saving MODE [Disabled]
Allows you to enable or disable the EPU power saving function.Configuration options:
[Disabled] [Enabled]
EPU Setting [Auto]
This item appears only when you set the EPU Power Saving MODE item to [Enabled.] and
allows you to select the EPU power saving mode. Configuration options: [Auto] [Light Power
Saving Mode] [Medium Power Saving Mode] [Max Power Saving Mode]
GPU Boost [OK]
[OK]
[Cancel]
Select [OK] to automatically optimize the iGPU frequency.
Select [Cancel] to use a fixed iGPU frequency.
DRAM Timing Control
Chapter 3
The sub-items in this menu allow you to set the DRAM timing control features. Use the &lt;+&gt;
and &lt;-&gt; keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the &lt;Enter&gt; key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use &lt;+&gt; and &lt;-&gt; keys to
adjust the value. The valid value ranges vary according to your CPU model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel&reg; SpeedStep Technology (EIST).
[Disabled] Disables this function.
[Enabled] The operating system dynamically adjusts the processor voltage and
core frequency which may result in decreased average consumption and
decreased average heat production.
ASUS P8Z77-V LK
3-9
Turbo Mode [Enabled]
This item appears only when you set the EIST item to [Enabled].
[Enabled]Allows processor cores to run faster than marked frequency in specific
conditions.
[Disabled] Disables this function.
The following three items appear only when you set both the Turbo Mode item to
[Enabled].
Long Duration Power Limit [Auto]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the value.
Long Duration Maintained [Auto]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the value.
Short Duration Power Limit [Auto]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the value.
Primary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for CPU cores
Use &lt;+&gt; and &lt;-&gt; key to adjust the value at 0.125A increment. .
Secondary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for Internal Graphics cores.
Use &lt;+&gt; and &lt;-&gt; key to adjust the value at 0.125A increment.
DIGI+ VRM
Chapter 3
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel VRM spec and affects CPU voltage. The CPU working voltage
will decrease proportionally to CPU loading. Higher value gets a higher voltage and better
overclocking performance, but increases the CPU and VRM thermal. This item allows you to
adjust the voltage range from the following percentages to boost the system performance:
0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High) and 100% (Extreme).
Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specification.
CPU Fixed Frequency [xxx]
Frequency switching affects the VRM transient response and the thermal component. Higher
frequency gets quicker transient response. Use the &lt;+&gt; and &lt;-&gt; keys to adjust the value. The
values range from 200k Hz to 350k Hz with a 50k Hz interval.
DO NOT remove the thermal module when switching to Manual Mode. The thermal
conditions should be monitored.
CPU Power Phase Control [Standard]
Allows you to control the power phase based on the CPU’s demands.
Configuration options: [Standard] [Optimized] [Extreme] [Manual Adjustment]
3-10
Chapter 3: BIOS setup
DO NOT remove the thermal module when switching to Extreme and Manual Mode. The
thermal conditions should be monitored.
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty control adjusts the current and thermal conditions of every component’s
phase. Configuration options:
[T. Probe] - Select to maintain the VRM thermal balance.
[Extreme] - Select to maintain the current VRM balance.
CPU Current Capability [100%]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [100%] [110%] [120%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
iGPU Load-line Calibration [Auto]
Allows you to set the iGPU Load-line Calibration.
Configuration options: [Auto] [Regular] [High] [Extreme]
iGPU Current Capability [100%]
Allows you to set the iGPU Current Capability. Configuration options: [100%] [110%] [120%]
Do not remove the thermal module while changing the DIGI+ VRM related parrameters .
The thermal conditions should be monitored.
CPU Voltage [Offset Mode]
Chapter 3
[Manual Mode] Allows you to set a fixed CPU voltage.
[Offset Mode] Allows you to set the Offset voltage.
CPU Offset Mode Sign [+]
This item appears only when you set the CPU Voltage item to [Offset Mode].
[+]
To offset the voltage by a positive value.
[–]
To offset the voltage by a negative value.
CPU Offset Voltage [Auto]
This item appears only when you set the CPU Voltage item to [Offset Mode] and
allows you to set the Offset voltage. The values range from 0.005V to 0.635V with a
0.005V interval.
CPU Manual Voltage [Auto]
This item appears only when you set the CPU Voltage item to [Manual Mode] and
allows you to set a fixed CPU voltage. The values range from 0.800V to 1.990V with a
0.005V interval.
Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage
may damage the CPU permanently, and setting a low voltage may make the system
unstable.
ASUS P8Z77-V LK
3-11
iGPU Voltage [Offset Mode]
[Manual Mode] Allows you to set a fixed iGPU voltage.
[Offset Mode] Allows you to set the iGPU Offset voltage.
iGPU Offset Voltage [Auto]
This item appears only when you set the iGPU Voltage item to [Offset Mode] and
allows you to set the Offset voltage. The values range from 0.005V to 0.635V with a
0.005V interval.
iGPU Manual Voltage [Auto]
This item appears only when you set the iGPU Voltage item to [Manual Mode] and
allows you to set a fixed iGPU voltage. The values range from 0.800V to 1.990V with a
0.005V interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.185V to 2.135V with a 0.005V
interval.
According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage
the CPU permanently. We recommend you install the DIMMs with the voltage requirement
below 1.65V.
VCCSA Voltage [Auto]
Allows you to set the VCCSA voltage. The values range from 0.735V to 1.685V with a 0.005V
interval.
PCH Voltage [Auto]
Chapter 3
Allows you to set the Platform Controller Hub volage. The values range from 0.735V to
1.685V with a 0.005V interval.
•
The values of the CPU Manual Voltage, CPU Offset Voltage, iGPU Manual Voltage,
iGPU Offset Voltage, DRAM Voltage, VCCSA Voltage and PCH Voltage items are
labeled in different color, indicating the risk levels of high voltage settings.
•
The system may need better cooling system to work stably under high voltage
settings.
CPU Offset
Voltage
CPU Manual
Voltage
iGPU Mode
Voltage
iGPU Manual
Voltage
DRAM Voltage
VCCSA Voltage
PCH Voltage
3-12
Black
0.005V–
0.060V
Yellow
0.065V–
0.120V
Pink
0.125V–
0.175V
Red
0.180V–
0.635V
0.005V–
0.035V
0.04V–0.065V
0.07V–0.1V
0.105V–
0.635V
1.20000V–
1.57500V
0.80000V–
1.10000V
0.80000V–
1.10000V
1.58125V–
1.65000V
1.10625V–
1.15000V
1.11000V–
1.15000V
1.65625V–
1.72500V
1.15625V–
1.20625V
1.16000V–
1.20000V
1.73125V–
2.20000V
1.21250V–
1.70000V
1.21000V–
1.70000V
Chapter 3: BIOS setup
CPU PLL Voltage [Auto]
Allows you to set the CPU and PCH PLL voltage. The values range from 1.80V to 1.90V with
a 0.1V interval. Configuration options: [Auto] [+0.1V]
CPU Spread Spectrum [Auto]
Automatic configuration.
Enhances the BCLK overclocking ability.
Sets to [Enabled] for EMI control.
Chapter 3
[Auto]
[Disabled]
[Enabled]
ASUS P8Z77-V LK
3-13
3.5
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Exit
Monitor
Boot
Tool
CPU Configuration Parameters
&gt; CPU Configuration
&gt; PCH Configuration
&gt; SATA Configuration
&gt; System Agent Configuration
&gt; USB Configuration
&gt; Onboard Devices Configuration
&gt; APM
&gt; Network Stack
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Chapter 3
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
3-14
Chapter 3: BIOS setup
3.5.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items shown in this screen may be different due to the CPU you installed.
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Back
Exit
Advanced
Monitor
Boot
Tool
Advanced\ CPU Configuration &gt;
CPU Configuration
Adjust Non-Turbo Ratio
Genuine Intel(R) CPU 0 @ 2.90GHz
EM64T
Processor Speed
Processor Stepping
Microcode Revision
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Processor Cores
Intel HT Technology
CPU Ratio Range
CPU Current Ratio
Supported
2900 MHz
306a6
4
32 kB x 4
32 kB x 4
256 kB x 4
6144 kB
4
Not Supported
16-29
29
Intel Adaptive Thermal Monitor
Enabled
Active Processor Cores
All
Limit CPUID Maximum
Disabled
Execute Disable Bit
Enabled
Intel Virtualization Technology
Disabled
Hardware Prefetcher
Enabled
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Chapter 3
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Scroll down to display the following items:
Adjacent Cache Line Prefetch
Enabled
&gt; CPU Power Management Configuration
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Intel Adaptive Thermal Monitor [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables the CPU thermal monitor function.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2] [3]
Limit CPUID Maximum [Disabled]
[Enabled]
[Disabled]
Allows legacy operating systems to boot even without support for CPUs
with extended CPUID functions.
Disables this function.
ASUS P8Z77-V LK
3-15
Execute Disable Bit [Enabled]
[Enabled]
[Disabled]
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
Intel Virtualization Technology [Disabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Hardware Prefetcher [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to perform adjacent cache line prefetching.
Disables this function.
CPU Power Management Configuration
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use
&lt;+&gt; and &lt;-&gt; keys to adjust the ratio. The valid value ranges vary according to your
CPU model.
Enhanced Intel SpeedStep Technology [Enabled]
Chapter 3
Allows you to enable or disable the Enhanced Intel&reg; SpeedStep Technology (EIST).
[Disabled] The CPU runs at its default speed.
[Enabled] The operating system controls the CPU speed.
Turbo Mode [Enabled]
This item appears only when you set the EIST item to [Enabled} and allows you to
enable or disable the Intel&reg; Turbo Mode Technology.
[Enabled] Allows processor cores to run faster than marked frequency in specific
condition.
[Disabled] Disables this function.
CPU C1E [Auto]
Allows you to enable or disable the CPU C1E.
[Auto]
Set this item automatically.
[Enabled] Enables the C1E support function. This item should be enabled in order to
enable the Enhanced Halt State.
[Disabled] Disables this function.
3-16
Chapter 3: BIOS setup
CPU C3 Report [Auto]
Allows you to disable or enable the CPU C3 report to OS.
[Auto]
Set this item automatically.
[Enabled] Enables the C3 report function. This item should be enabled in order to
enable the Enhanced Halt State.
[Disabled] Disables this function.
CPU C6 Report [Auto]
Allows you to disable or enable the CPU C6 report to OS.
[Auto]
Set this item automatically.
[Enabled] Enables the C6 report function. This item should be enabled in order to
enable the Enhanced Halt State.
[Disabled] Disables this function.
3.5.2
PCH Configuration
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Back
Exit
Advanced
Monitor
Boot
Tool
Advanced\ PCH Configuration &gt;
PCH Configuration
High Precision Timer
Enabled
Enabled/Disabled the High Precision
Event Timer.
&gt; Intel(R) Rapid Start Technology
Chapter 3
&gt; Intel(R) Smart Connect Technology
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.Configuration options:
[Enabled] [Disabled]
Intel(R) Rapid Start Technology
Intel(R) Rapid Start Technology [Disabled]
Allows you to enable or disable the Intel(R) Rapid Start Technology.Configuration options:
[Enabled] [Disabled]
The following three items appear only when you set the Intel(R) Rapid Start Technology
to [Enabled].
Entry on S3 RTC Wake [Enabled]
Allows you to enable or disable the iFFS invocation upon S3 RTC wake. Configuration
options: [Enabled] [Disabled]
ASUS P8Z77-V LK
3-17
Entry After [Immediately]
This item appears only when you set the Entry on S3 RTC Wake to [Enabled] and
allows you to set the RTC wake timer at S3 entry. Configuration options: [Immediately]
[1 minute] [2 minute] [5 minute] [10 minute] [15 minute] [30 minute] [1 hour] [2 hours]
Active Page Threshold Support [Enabled]
Allows you to enable or disable the Active Page Threshold Support. Configuration
options: [Enabled] [Disabled]
Active Memory Threshold [x]
This item appears only when you set the Active Page Threshold Support to
[Enabled] and allows you to set the Active Memory Threshold. When the partition size
is larger than the Active Page Threshold size, the system will try to support the Intel(R)
Rapid Start Technology. When the item is set to zero, the system automatically checks
whether the partition size is enough at S3 entry. Key in the desired value using the
numeric keypad.
Intel&reg; Smart Connect Technology
ISCT Configuration [Disabled]
Allows you to enable or disable the ISCT configuration. Configuration options:
[Enabled] [Disabled]
3.5.3
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA
Port items show Not Present if no SATA device is installed to the corresponding SATA port.
EFI BIOS Utility - Advanced Mode
Chapter 3
Ai Tweaker
Main
Back
Exit
Advanced
Monitor
SATA Configuration
SATA Mode Selection
S.M.A.R.T. Status Check
SATA 6G_1 (Gray)
Hot Plug
SATA 6G_2 (Gray)
Hot Plug
SATA 3G_1 (Blue)
Hot Plug
SATA 3G_2 (Blue)
Hot Plug
SATA 3G_3 (Blue)
Hot Plug
SATA 3G_4 (Blue)
3-18
Boot
Tool
Advanced\ SATA Configuration &gt;
Determines how SATA controller(s)
operate.
AHCI
Enabled
Empty
Disabled
Empty
Disabled
Empty
Disabled
Empty
Disabled
Empty
Disabled
Empty
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Chapter 3: BIOS setup
Scroll down to display the following items:
Hot Plug
Disabled
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
SATA Mode Selection [AHCI]
Allows you to set the SATA configuration.
[IDE]
[AHCI]
[RAID]
Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
Set to [AHCI Mode] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
Set to [RAID Mode] when you want to create a RAID configuration from the
SATA hard disk drives.
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
Chapter 3
These items appear only when you set the SATA mode item to [AHCI] or [RAID], and allow
you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled]
ASUS P8Z77-V LK
3-19
3.5.4
System Agent Configuration
EFI BIOS Utility - Advanced Mode
Main
Back
Ai Tweaker
Advanced
Monitor
Boot
Tool
Advanced\ System Agent Configuration &gt;
System Agent Bridge Name
Memory Remap Feature
IvyBridge
Enabled
Enable or disable memory remap above
4G.
&gt; Graphics Configuration
&gt; NB PCIe Configuration
Memory Remap Feature [Enabled]
[Enabled]
[Disabled]
Allow you to enable remapping the memory above 4GB.
Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to select a primary display from IGFX, PEG, or PCI graphic devices, or
select SG for switchable GFX. Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to set the iGPU memory size. Configuration options: [32M] [64M] [96M]
[128M] ~ [448M] [480M] [512M]
Render Standby [Enabled]
Chapter 3
Allows you to enable or disable Render Standby by internal graphics devices.
Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function supports,
set this item to [Enabled] to empower both integrated and discrete graphics. iGPU
shared system memory size is fixed in 64MB. Configuration options: [Disabled]
[Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIE x16_1 [Auto]
Allows you to set the PCIE x16_1 link speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
PCIE x16_2 [Auto]
Allows you to set the PCIE x16_2 link speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
3-20
Chapter 3: BIOS setup
3.5.5
USB Configuration
The items in this menu allow you to change the USB-related features.
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Back
Advanced
Exit
Monitor
Boot
Tool
Advanced\ USB Configuration &gt;
USB Configuration
USB Devices:
2 Hubs
Legacy USB Support
Legacy USB3.0 Support
Intel xHCI Mode
Enabled
Enables Legacy USB support. AUTO
option disables legacy support if no
USB devices are connected. DISABLE
option will keep USB devices
available only for EFI applications.
Enabled
Smart Auto
EHCI Hand-off
Disabled
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
[Enabled]
[Disabled]
Chapter 3
This item appears only when you set the previous item to [Enabled] or [Auto].
Enables the support for USB 3.0 devices on legacy operating systems
(OS).
Disables the function.
Intel xHCI Mode [Smart Auto]
Allows you to select the Intel xHCI Mode. Configuration options: [Smart Auto] [Auto] [Enabled]
[Disabled]
EHCI Hand-off [Disabled]
[Enabled]
[Disabled]
Enables the support for operating systems without an EHCI hand‑off
feature.
Disables the function.
ASUS P8Z77-V LK
3-21
3.5.6
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
[Disabled]
Enables the High Definition Audio Controller.
Disables the controller.
Chapter 3
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or highdefinition audio depending on the audio standard that the front panel audio module supports.
[HD]
[AC97]
Sets the front panel audio connector (AAFP) mode to high definition audio.
Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
PCI Express X16_3 slot (Black) bandwidth
[x2 mode]
[x4 mode]
PCIeX16_3 slot runs at x2 mode with all slots enabled.
PCIeX16_3 slot runs at X4 mode for high performance. (PCIe x1_2 slot will
be disabled).
3-22
Chapter 3: BIOS setup
Realtek LAN Controller [Enabled]
[Enabled]
[Disabled]
Enables the Realtek LAN controller.
Disables the controller.
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the PXE OptionRom of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]
ASmedia USB 3.0 Controller [Enabled]
[Enabled]
[Disabled]
Enables the USB 3.0 controller.
Disables the controller.
ASmedia USB 3.0 Battery Charging Support [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the USB 3.0 Battery Charging Support.
[Enabled]
[Disabled]
Enables Asmedia USB 3.0 fast battery charging support for USB 3.0
devices complying with the BC 1.1 regulation.
Disables battery charging support.
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options: [Enabled]
[Disabled]
Chapter 3
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [Enabled] and allows you
to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
ASUS P8Z77-V LK
3-23
3.5.7
APM
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Back
Exit
Advanced
Monitor
Boot
Tool
Advanced\ APM &gt;
Restore AC Power Loss
Power On By PS/2 Keyboard
Power Off
Disabled
Power On By PCIE/PCI
Disabled
Power On By Ring
Disabled
Power On By RTC
Disabled
Allow BIOS yo switch off some power
at S5 to get the system ready for ErP
requirement. When set to Enabled, all
other PME options will be switched
off.
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
[Power Key]
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Chapter 3
Power On By PCIE/PCI [Disabled]
[Disabled]Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel/Realtek LAN device.
[Enabled]Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel/Realtek LAN device.
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Disables Ring to generate a wake event.
Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
[Enabled]
3-24
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
Chapter 3: BIOS setup
RTC Alarm Date (Days)
This item appears only when you set the previous item to [Enabled] and allows you to select
RTC alarm time (days). When you set the time to zero, the RTC alarms everyday. Use &lt;+&gt;
and &lt;-&gt; keys to adjust the time.
- Hour / - Minute / - Second
Allows you to set the RTC alarm time. Use &lt;+&gt; and &lt;-&gt; keys to adjust the time.
3.5.8
Network Stack
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Back
Advanced
Exit
Monitor
Boot
Tool
Advanced\ Network Stack &gt;
Network Stack
Disabl Link
Allow BIOS yo switch off some power
at S5 to get the system ready for ErP
requirement. When set to Enabled, all
other PME options will be switched
off.
Network Stack [Disable Link]
Chapter 3
Enables or disables the UEFI network stack. Configuration options: [Disable Link] [Enable]
ASUS P8Z77-V LK
3-25
3.6
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the following items:
Chapter 3
3-26
Chapter 3: BIOS setup
CPU Temperature / MB Temperature [xxx&ordm;C/xxx&ordm;F]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A]
Chassis Fan 1/2/3 Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignore if you do not wish to display the detected speed.
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
CPU Q-Fan Control [Enabled]
[Disabled]
[Enabled]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
CPU Fan Speed Low Limit [200 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
disable or set the CPU fan warning speed.
Configuration options: [Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to set the appropriate performance level of the CPU fan.
Chapter 3
[Standard]Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent]Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Profile to [Manual].
CPU Upper Temperature [70]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the upper limit of the CPU temperature. The values range
from 40&ordm;C to 90&ordm;C.
CPU Fan Max. Duty Cycle(%) [100]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the maximum CPU fan duty cycle. The values range from
20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at
the maximum duty cycle.
CPU Lower Temperature [20]
Displays the lower limit of the CPU temperature.
CPU Fan Min. Duty Cycle(%) [20]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the minimum CPU fan duty cycle. The values range from 0%
to 100%. When the CPU temperature is under 40&ordm;C, the CPU fan will operate at the minimum
duty cycle.
ASUS P8Z77-V LK
3-27
Chassis 1/2/3 Q-Fan Control [Enabled]
[Disabled]
[Enabled]
Disables the Chassis 1/2/3 Q-Fan control feature.
Enables the Chassis 1/2/3 Q-Fan control feature.
Chassis 1/2/3 Fan Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis 1/2/3 Q-Fan Control feature and
allows you to disable or set the chassis 1/2/3 fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis 1/2/3 Fan Profile [Standard]
This item appears only when you enable the Chassis 1/2/3 Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis 1/2/3 fan.
[Standard]Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Silent]Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum chassis fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis 1/2/3 Fan Profile to [Manual].
Chassis 1/2/3 Upper Temperature [70]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the upper limit of the chassis temperature. The values range
from 40&ordm;C to 90&ordm;C.
Chassis 1/2/3 Fan Max. Duty Cycle(%) [100]
Chapter 3
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the maximum chassis 1/2/3 fan duty cycle. The values range
from 20% to 100%. When the chassis temperature reaches the upper limit, the chassis 1/2/3 fan
will operate at the maximum duty cycle.
Chassis 1/2/3 Lower Temperature [40]
Displays the lower limit of the chassis temperature.
Chassis Fan Min. Duty Cycle(%) [60]
Use the &lt;+&gt; and &lt;-&gt; keys to adjust the minimum chassis fan duty cycle. The values range from
0% to 100%. When the chassis temperature is under 40&ordm;C, the chassis 1/2/3 fan will operate at
the minimum duty cycle.
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function.
Configuration options: [Disabled] [Enabled]
3-28
Chapter 3: BIOS setup
3.7
Boot menu
The Boot menu items allow you to change the system boot options.
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Exit
Advanced
Monitor
Bootup NumLock State
On
Full Screen Logo
Enabled
Wait for ‘F1’ If Error
Option ROM Messages
Boot
Tool
Select the keyboard NumLock state
Enabled
Force BIOS
Setup Mode
EZ Mode
UEFI/Legacy Boot
Enable bot...
PCI ROM Priority
Legacy ROM
Boot Option Priorities
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Boot Override
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Bootup NumLock State [On]
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
Chapter 3
[On]
[Off]
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Wait For ‘F1’ If Error [Enabled]
[Disabled]
[Enabled]
Disables this function.
The system waits for the &lt;F1&gt; key to be pressed when error occurs.
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
ASUS P8Z77-V LK
3-29
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode]
Sets EZ Mode as the default screen for entering the BIOS setup program.
UEFI/Legacy Boot [Enable both UEFI and Legacy]
[Enable both UEFI and Legacy]
[Disable UEFI]
Enables both UEFI and Legacy boot.
Enables the Legacy boot, and disables the UEFI boot.
[Disable Legacy]
Enables the UEFI booth, and disables the Legacy boot.
PCI ROM Priority [Legacy ROM]
Allows you to select which PCI Option ROM to launch in case there are multiple Option
ROMs (Legacy and UEFI compatible). Configuration options: [Legacy ROM] [UEFI
Compatible].
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
•
To select the boot device during system startup, press &lt;F8&gt; when ASUS Logo appears.
•
To access Windows OS in Safe Mode, do any of the following:
- Press &lt;F5&gt; when ASUS Logo appears.
- Press &lt;F8&gt; after POST.
Boot Override
Chapter 3
These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
3-30
Chapter 3: BIOS setup
3.8
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press &lt;Enter&gt; to display the submenu.
EFI BIOS Utility - Advanced Mode
Ai Tweaker
Main
Exit
Advanced
Monitor
Boot
Tool
Be used to update BIOS
&gt; ASUS EZ Flash 2 Utility
&gt; ASUS O.C. Profile
&gt; ASUS SPD Information
ASUS EZ Flash 2 Utility
Allows you to run ASUS EZ Flash 2. When you press &lt;Enter&gt;, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press &lt;Enter&gt; to
confirm your choice.
For more details, refer to section 3.10.2 ASUS EZ Flash 2 utility.
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
EFI BIOS Utility - Advanced Mode
Advanced
Monitor
Profile
Profile
Profile
Profile
Profile
Profile
Profile
Profile
Tool
Tool\ ASUS O.C. Profile &gt;
O.C. Profile Configuration
Setup
Setup
Setup
Setup
Setup
Setup
Setup
Setup
Boot
Chapter 3
Ai Tweaker
Main
Back
Exit
1
2
3
4
5
6
7
8
Status
Status
Status
Status
Status
Status
Status
Status
:
:
:
:
:
:
:
:
Save BIOS settings to Profile
Not
Not
Not
Not
Not
Not
Not
Not
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Add Your CMOS Profile
Label
Save to Profile
1
Add Your CMOS Profile
Load from Profile
1
The Setup Profile Status items show Not Installed if no profile is created.
ASUS P8Z77-V LK
3-31
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press &lt;Enter&gt;, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your BIOS settings, press &lt;Enter&gt;, and then select Yes.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
ASUS SPD Information
DIMM Slot # [Slot 1]
Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the
selected slot. Configuration options: [Slot 1] [Slot 2] [Slot 3] [Slot 4]
Chapter 3
3-32
Chapter 3: BIOS setup
3.9
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Exit
Load Optimized Defaults
Save Changes &amp; Reset
Discard Changes &amp; Exit
ASUS EZ Mode
Launch EFI Shell from filesystem device
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press &lt;F5&gt;, a confirmation window appears.
Select Yes to load the default values.
Save Changes &amp; Reset
Chapter 3
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press &lt;F10&gt;,
a confirmation window appears. Select Yes to save changes and exit.
Discard Changes &amp; Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press &lt;Esc&gt;, a confirmation window appears. Select Yes to
discard changes and exit.
ASUS EZ Mode
This option allows you to enter the EZ Mode screen.
Launch EFI Shell from filesystem device
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available filesystem devices.
ASUS P8Z77-V LK
3-33
3.10 Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system
stability, compatibility, or performance. However, BIOS updating is potentially risky. If there
is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the
instructions of this chapter to update your BIOS if necessary.
Visit the ASUS website (www.asus.com) to download the latest BIOS file for this
motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1.
ASUS Update: Updates the BIOS in Windows&reg; environment.
2.
ASUS EZ Flash 2: Updates the BIOS using a USB flash drive.
3.
ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or
a USB flash drive when the BIOS file fails or gets corrupted.
4.
ASUS BIOS Updater: Updates and backups the BIOS in DOS environment using the
motherboard support DVD and a USB flash disk drive.
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need
to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS
Update or BIOS Updater utilities.
3.10.1
ASUS Update utility
Chapter 3
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows&reg; environment. The ASUS Update utility allows you to:
•
Update the BIOS directly from the Internet
•
Download the latest BIOS file from the Internet
•
Update the BIOS from an updated BIOS file
This utility is available in the support DVD that comes with the motherboard package.
ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
Launching ASUS Update
After installing AI Suite II from the motherboard support DVD, launch ASUS Update by
clicking Update &gt; ASUS Update on the AI Suite II main menu bar.
Quit all Windows&reg; applications before you update the BIOS using this utility.
3-34
Chapter 3: BIOS setup
Updating the BIOS through the Internet
1.
From the ASUS Update screen, select
Update BIOS from Internet, and
then click Next.
2.
Select the ASUS FTP site nearest
you to avoid network traffic.
If you want to enable the BIOS
downgradable function and auto
BIOS backup function, check the
checkboxs before the two items on
the screen.
3.
Select the BIOS version that you
want to download. Click Next.
Chapter 3
To update the BIOS through the Internet:
0204
P8Z77-V LK
1. Beta 0204
0204
02/22/2012
4.
5.
You can decide whether to change
the BIOS boot logo, which is the
image appearing on screen during
the Power‑On Self-Tests (POST).
Click Yes if you want to change the
boot logo or No to continue.
P8Z77-V LK
0204
02/22/2012
Follow the onscreen instructions to
complete the update process.
ASUS P8Z77-V LK
3-35
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
Chapter 3
1.
From the ASUS Update screen,
select Update BIOS from file, and
then click Next.
2.
Locate the BIOS file from the Open
window, click Open, and click Next.
3.
You can decide whether to change
the BIOS boot logo. Click Yes if you
want to change the boot logo or No to
continue.
4.
Follow the onscreen instructions to
complete the update process.
P8Z77-V LK
0204
02/22/2012
P8Z77-V LK
0204
02/22/2012
3-36
•
The screenshots in this section are for reference only. The actual BIOS information
vary by models.
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
Chapter 3: BIOS setup
3.10.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a
bootable floppy disk or an OS‑based utility.
Before you start using this utility, download the latest BIOS from the ASUS website
at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port.
2.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press &lt;Enter&gt; to enable it.
Exit
ASUSTek EZ Flash BIOS ROM Utility V00.75
Flash Info
MODEL: P8Z77-V LK
VER: 0204
DATE: 12/14/2011
fs0:\
Drive
Folder Info
fs0:\
fs1:\
02/22/12
10:23p
4194304
P8Z77VLK.CAP
MODEL:
VER:
Chapter 3
File Infor
DATE:
Help Info
[Enter] Select or Load
[Tab] Switch
[Up/Down/PageUp/PageDown/Home/End] Move
[Esc] Exit
[F2] Backup
3.
Press &lt;Tab&gt; to switch to the Drive field.
4.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,
and then press &lt;Enter&gt;.
5.
Press &lt;Tab&gt; to switch to the Folder Info field.
6.
Press the Up/Down arrow keys to find the BIOS file, and then press &lt;Enter&gt; to perform
the BIOS update process. Reboot the system when the update process is done.
ASUS P8Z77-V LK
3-37
•
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Optimized Defaults item under the Exit menu. See section 3.9 Exit Menu for
details.
3.10.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains
the BIOS file.
•
The BIOS file in the motherboard support DVD may be older than the BIOS file
published on the ASUS official website. If you want to use the newer BIOS file,
download the file at support.asus.com and save it to a USB flash drive.
•
Before using this utility, rename the BIOS file in the removable device into
P8Z77VLK.CAP.
Recovering the BIOS
To recover the BIOS:
Chapter 3
1.
Turn on the system.
2.
Insert the motherboard support DVD to the optical drive, or the USB flash drive
containing the BIOS file to the USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 2 utility automatically.
4.
The system requires you to enter BIOS Setup to recover BIOS setting. To ensure
system compatibility and stability, we recommend that you press &lt;F5&gt; to load default
BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
3-38
Chapter 3: BIOS setup
3.10.4
ASUS BIOS Updater
The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or
gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may
not be same as shown.
Before updating BIOS
1.
Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and
single partition.
2.
Download the latest BIOS file and BIOS Updater from the ASUS website at http://
support.asus.com and save them on the USB flash drive.
3.
•
NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
Updater to a hard disk drive or USB flash drive in NTFS format.
•
Do not save the BIOS file to a floppy disk due to low disk capacity.
Turn off the computer and disconnect all SATA hard disk drives (optional).
1.
Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
2.
Boot your computer. When the ASUS Logo appears, press &lt;F8&gt; to show the BIOS
Boot Device Select Menu. Insert the support DVD into the optical drive and select the
optical drive as the boot device.
Chapter 3
Booting the system in DOS environment
Please select boot device:
SATA: XXXXXXXXXXXXXXXX
USB XXXXXXXXXXXXXXXXX
UEFI: XXXXXXXXXXXXXXXX
Enter Setup
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
3. When the Make Disk menu appears, select the FreeDOS command prompt item by
pressing the item number.
4.
At the FreeDOS prompt, type d: and press &lt;Enter&gt; to switch the disk from
Drive C (optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\&gt;d:
D:\&gt;
ASUS P8Z77-V LK
3-39
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /g and press &lt;Enter&gt;.
D:\&gt;bupdater /pc /g
2.
The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.18 [2010/04/29]
Current ROM
BOARD: P8Z77-V LK
VER: 0204
DATE: 02/22/2012
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
P8Z77VLK.CAP
17:30:48
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
3.
4194304 2011-12-14
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
Press &lt;Tab&gt; to switch between screen fields and use the &lt;Up/Down/Home/End&gt; keys
to select the BIOS file and press &lt;Enter&gt;. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Chapter 3
Are you sure to update BIOS?
Yes
4.
No
Select Yes and press &lt;Enter&gt;. When BIOS update is done, press &lt;ESC&gt; to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
3-40
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3
of your motherboard user manual for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Chapter 3: BIOS setup
Chapter 4
Chapter 4:
4.1
Software support
Installing an operating system
This motherboard supports Windows&reg; XP/ 64-bit XP / 7 / 64-bit 7 operating systems (OS).
Always install the latest OS version and corresponding updates to maximize the features of
your hardware.
4.2
•
Motherboard settings and hardware options vary. Use the setup procedures presented
in this chapter for reference only. Refer to your OS documentation for detailed
information.
•
Ensure that you install the Windows&reg; XP Service Pack 3 or Windows&reg; 64-bit XP / 7
/ 64-bit 7 operating systems (OS) before installing the drivers for better compatibility
and system stability.
Support DVD information
The support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the support DVD are subject to change at any time without notice. Visit the
ASUS website at www.asus.com for updates.
4.2.1
Running the support DVD
Place the support DVD into the optical drive. The DVD automatically displays the Drivers menu if
Autorun is enabled in your computer. Click each menu tab and select the items you want to install.
The Drivers menu shows the available
device drivers if the system detects
installed devices. Install the necessary
drivers to use the devices.
The Utilities
menu shows the
applications and
other software that
the motherboard
supports.
The Make Disk menu
contains items to
create the RAID/AHCI
driver disk.
The Manual menu contains
the list of supplementary user
manuals. Click an item to open
the folder of the user manual.
Click the Contact
tab to display the
ASUS contact
information.
Click an icon
to display DVD/
motherboard
information
Chapter 4
Click an item
to install
If Autorun is NOT enabled in your computer, browse the contents of the support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
ASUS P8Z77-V LK
4-1
4.2.2
Obtaining the software manuals
The software manuals are included in the support DVD. Follow the instructions below to get
the necessary software manuals.
The software manual files are in Portable Document Format (PDF). Install the Adobe&reg;
Acrobat&reg; Reader from the Utilities menu before opening the files.
1.
Click the Manual tab. Click ASUS
Motherboard Utility Guide from
the manual list on the left.
2.
The Manual folder of the support
DVD appears. Double-click the
folder of your selected software.
3.
Some software manuals are
provided in different languages.
Double-click the language to
show the software manual.
Chapter 4
The screenshots in this section are for reference only. The actual software manuals
containing in the support DVD vary by models.
4-2
Chapter 4: Software support
4.3
Software information
Most of the applications in the support DVD have wizards that will conveniently guide you
through the installation. View the online help or readme file that came with the software
application for more information.
4.3.1
AI Suite II
AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to
launch and operate these utilities simultaneously.
Installing AI Suite II
To install AI Suite II on your computer
1.
Place the support DVD to the optical drive. The Drivers installation tab appears if your
computer has enabled the Autorun feature.
2.
Click the Utilities tab, then click AI Suite II.
3.
Follow the onscreen instructions to complete installation.
Using AI Suite II
AI Suite II automatically starts when you enter the Windows&reg; operating system (OS). The AI
Suite II icon appears in the Windows&reg; notification area. Click the icon to open the AI Suite II
main menu bar.
Click each button to select and launch a utility, to monitor the system, to update the motherboard
BIOS, to display the system information, and to customize the settings of AI Suite II.
Click to customize
the interface settings
Click to show the
system information
Click to update the motherboard BIOS
Click to monitor sensors
or CPU frequency
Click to select a utility
•
The Auto Tuning button appears only on models with the TurboV EVO function.
•
The applications in the Tool menu vary with models.
•
The screeshots of AI Suite II in this user manual are for reference only. The actual
screenshots vary with models.
•
Refer to the software manual in the support DVD or visit the ASUS website
at www.asus.com for detailed software configuration.
ASUS P8Z77-V LK
Chapter 4
Shortcut to the Auto Tuning
Mode under TurboV EVO
4-3
4.3.2
TurboV EVO
ASUS TurboV EVO introduces TurboV that allows you to manually adjust the CPU frequency
and related voltages as well as Auto Tuning function that offers automatic and easy
overlocking and system level up. After installing AI Suite II from the motherboard support
DVD, launch TurboV EVO by clicking Tool &gt; TurboV EVO on the AI Suite II main menu bar.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
TurboV
TurboV allows you to overclock the BCLK frequency, CPU voltage, IMC voltage, and DRAM
Bus voltage in WIndows&reg; environment and takes effect in real-time without exiting and
rebooting the OS.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high
voltage may damage the CPU permanently, and setting a low voltage may make the
system unstable.
For system stability, all changes made in TurboV will not be saved to BIOS settings and
will not be kept on the next system boot. Use the Save Profile function to save your
customized overclocking settings and manually load the profile after Windows starts.
Auto Tuning Mode
TurboV
Load profile
Target values
Current values
Advanced
Mode
Save the current
settings as a
new profile
Voltage
Adjustment
bars
Undoes all changes
without applying
Click to restore
all start-up
settings
Applies all changes
immediately
Chapter 4
For advanced overclock ability, adjust first the BIOS items, and then proceed more detailed
adjustments.
4-4
Chapter 4: Software support
Using Advanced Mode
Click More Settings, and then click the Advanced Mode tab to adjust the advanced voltage
settings.
Advanced mode
Target values
Voltage
Adjustment
bars
Current values
Undoes all changes
without applying
Applies all changes
immediately
Click to restore
all start-up
settings
CPU Ratio
Allows you to manually adjust the CPU ratio.
The first time you use CPU Ratio, go to AI Tweaker &gt; CPU Power Management in BIOS
and set the Turbo Ratio item to [Maximum Turbo Ratio setting in OS], or activate CPU
Ratio by clicking the ON button on the CPU Ratio function screen.
1.
Click Manual Mode, and then click the CPU Ratio tab.
2.
Click the ON button to activate CPU Ratio.
3.
You will requested to restart the system. Click Yes to make the change take effect.
Click to restore
all start-up
settings
ASUS P8Z77-V LK
Chapter 4
CPU Ratio
Applies all changes
immediately
Undoes all changes
without applying
4-5
4.
Drag the adjustment bar upwards or downwards to the desired value.
Adjustment bar
•
Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function
in TurboV. Refer to Chapter 3 of your motherboard user manual for details.
•
The CPU Ratio bars show the status of the CPU cores, which vary with your CPU
model.
Chapter 4
4-6
Chapter 4: Software support
Auto Tuning
Auto Tuning is an intelligent tool that overclocks your system to achieve a total system level
up using TurboV. Even O.C. beginners can achieve extreme yet stable overlocking results
with Auto Tuning!
•
The overclocking result varies with the CPU model and the system configuration.
•
To prevent overheating from damaging the motherboard, a better thermal environment
is strongly recommended.
Fast Tuning: fast CPU overclocking
Using Fast Tuning
Click the Auto Tuning tab and
then click Fast.
2.
Read through the warning
messages and click OK to start
auto-overclocking.
3.
TurboV automatically overclocks
the CPU, saves BIOS settings
and restarts the system. After
re-entering Windows, a message
appears indicating auto tuning
success. Click OK to exit.
Chapter 4
1.
ASUS P8Z77-V LK
4-7
4.3.3
DIGI+ VRM
ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation to enhance
reliability and stability. It also provides the highest power efficiency, generating less heat to
longer component lifespan and minimize power loss.
After installing AI Suite II from the motherboard support DVD, launch DIGI+ VRM by
clicking Tool &gt; DIGI+ VRM on the AI Suite II main menu bar.
1
4
2
5
3
6
7
Application helps
Apply all changes immediately
Undo all changes without
applying
Items Function description
Chapter 4
1
CPU Load-line Calibration
It allows you to adjust the voltage settings and control the system temperature. Higher load-line
calibration could get higher voltage and good overclocking performance but increases the CPU
and VRM thermal.
2
CPU Current Capability
CPU Current Capability provides wider total power range for overclocking. A higher value
setting gets higher VRM power consumption delivery.
3
CPU Voltage Frequency
Switching frequency will affect the VRM transient response and component thermal. Higher
frequency gets quicker transient response.
4
iGPU Load-line Calibration
Load-line is defined by Intel VRM specifications, and affects the iGPU voltage. The iGPU
working voltage will decrease proportionally to integrated graphics loading. A higher value can
get a higher iGPU voltage, and a good performance, but increases the CPU and VRM thermal
conditions.
5
iGPU Current Capability
A higher value brings a wider total iGPU power range and extends the overclocking frequency
range simultaneously to enhance the iGPU performance.
6
CPU Power Phase Control
Increase phase number under heavy system loading to get more transient and better thermal
performance. Reduce phase number under light system loading to increase VRM efficiency.
7
CPU Power Duty Control
CPU Power Duty Control adjusts the current of every VRM phase and the thermal of every
phase component.
•
The actual performance boost may vary depending on your CPU specification.
•
Do not remove the thermal module. The thermal conditions should be monitored.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
4-8
Chapter 4: Software support
4.3.4
EPU
EPU is an energy-efficient tool that satisfies different computing needs. This utility provides
several modes that you can select to save system power. Selecting Auto mode will have the
system shift modes automatically according to current system status. You can also customize
each mode by configuring settings like CPU frequency, GPU frequency, vCore Voltage, and
Fan Control.
Launching EPU
After installing AI Suite II from the motherboard support DVD, launch EPU by clicking
Tool &gt; EPU on the AI Suite II main menu bar.
Displays the following message
if no VGA power saving engine is
detected.
The items lighting up
means power saving
engine is activated
Displays the amount
of CO2 reduced
*Shifts between the
display of Total and
Current CO2 reduced
Displays the current
CPU power
Advanced settings for each mode
*•
Select From EPU Installation to show the CO2 that has been reduced since you
installed EPU.
*•
Select From the Last Reset to show the total CO2 that has been reduced since you
click the Clear button
.
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS P8Z77-V LK
Chapter 4
Multiple system
operating modes
Displays the system
properties of each mode
4-9
4.3.5
FAN Xpert+
Fan Xpert+ intelligently allows you to adjust both the CPU and chassis fan speeds
according to different ambient temperatures caused by different climate conditions in
different geographic regions and your PC’s system loading. The built-in variety of useful
profiles offer flexible controls of fan speed to achieve a quiet and cool environment.
Launching FAN Xpert+
After installing AI Suite II from the motherboard support DVD, launch FAN Xpert+ by
clicking Tool &gt; FAN Xpert+ on the AI Suite II main menu bar.
Using FAN Xpert+
Click Fan Name to select a fan and then click Setting to select a preset mode for your
selected fan.
Click to select a fan type
Click to select a fan profile
Click to apply the settings
Click to discard the settings
Fan setting
Chapter 4
•
Disable: disables the Fan Xpert+ function.
•
Standard: adjusts fan speed in a moderate pattern.
•
Silent: minimizes fan speed for quiet fan operation.
•
Turbo: maximizes the fan speed for the best cooling effect.
•
Intelligent: automatically adjusts the CPU fan speed according to the ambient
temperature.
•
Stable: fixes the CPU fan speed to avoid noise caused by the unsteady fan rotation.
However, the fan will speed up when the temperature exceeds 70&deg;C.
•
User: Allows you to configure the CPU fan profile under certain limitations.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
4-10
Chapter 4: Software support
4.3.6
Probe II
Probe II is a utility that monitors the computer’s vital components, and detects and alerts you
of any problem with these components. Probe II senses fan rotations, CPU temperature,
and system voltages, among others. With this utility, you are assured that your computer is
always at a healthy operating condition.
Launching Probe II
After installing AI Suite II from the motherboard support DVD, launch Probe II by clicking
Tool &gt; Probe II on the AI Suite II main menu bar.
Configuring Probe II
Click the Voltage/Temperature/Fan Speed tabs to activate the sensors or to adjust the
sensor threshold values. The Preference tab allows you to customize the time interval of
sensor alerts, or change the temperature unit.
Saves your
configuration
Loads your saved
configuration
Loads the default
threshold values
for each sensor
Applies your
changes
ASUS P8Z77-V LK
Chapter 4
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
4-11
4.3.7
USB 3.0 Boost
The ASUS exclusive USB 3.0 Boost provides speed boost for USB 3.0 devices and the
up-to-date support of USB Attached SCSI Protocol (UASP). With USB 3.0 Boost, you can
accelerate the transfer speed of your USB 3.0 devices with ease.
Launching USB 3.0 Boost
After installing AI Suite II from the motherboard support DVD, launch USB 3.0 Boost by
clicking Tool &gt; USB 3.0 Boost on the AI Suite II main menu bar.
Configuring USB 3.0 Boost
1.
Connect a USB 3.0 device to the USB 3.0 port.
2.
USB 3.0 Boost automatically detects the property of the connected device and
switches to Turbo mode or UASP mode (if UASP is supported by the connected
device).
3.
You can manually switch the USB 3.0 mode back to Normal mode at any time.
•
•
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
Due to Intel&reg; chipset limitation, Intel&reg; USB 3.0 ports do not support ASUS 3.0 Boost in Windows XP operating system.
Use the USB 3.0 devices for high performance. The data transfer speed varies with USB devices.
Chapter 4
4-12
Chapter 4: Software support
4.3.8
MyLogo2
This MyLogo utility lets you customize the boot logo. The boot logo is the image that appears
on screen during the Power‑On‑Self-Tests (POST). Personalize your computer from the very
beginning!
Launching ASUS Update
After installing AI Suite II from the motherboard support DVD, launch MyLogo by clicking
Update&gt; MyLogo on the AI Suite II main menu bar.
Using MyLogo
Select the way you would like to do update your boot logo. Then click Next and follow the
given instructions.
Change the BIOS boot logo of my motherboard
Under Current BIOS, click Browse and choose the desired image for your boot logo.
Then click on Next.
Chapter 4
1.
ASUS P8Z77-V LK
4-13
2.
Click on Auto Tune to adjust image size compatibility or adjust the resolution bar.
3.
You can click on Booting Preview to preview the boot image. Then click Next.
4. Click on Flash to start updating the image to the boot logo.
5.
Click on Yes to reboot or you can also see the new logo next time you restart your
computer.
Change the boot logo of a downloaded BIOS file and update (or do not update) this
BIOS to the motherboard
1.
At BIOS File, Browse to download the requested BIOS file to your system. This utility
will help you detect the compatibility of the BIOS version.
2.
Then at Picture File, Browse to select the desired image for boot logo. Click Next.
3.
Follow steps 2-5 in Change the BIOS boot logo of my motherboard to complete
logo update.
Chapter 4
The fullscreen logo application in BIOS utility must be enabled for MyLogo to take effect.
4-14
Chapter 4: Software support
4.3.9
Audio configurations
The Realtek audio CODEC provides 8-channel audio capability to deliver the ultimate audio
experience on your computer. The software provides Jack-Detection function, S/PDIF Out
support, and interrupt capability. The CODEC also includes the Realtek&reg; proprietary UAJ&reg;
(Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and
giving users plug and play convenience.
&reg;
Follow the installation wizard to install the Realtek&reg; Audio Driver from the support DVD that
came with the motherboard package.
If the Realtek audio software is correctly installed, you will find
the Realtek HD Audio Manager icon on the taskbar. Doubleclick on the icon to display the Realtek HD Audio Manager.
Realtek HD Audio Manager
A. Realtek HD Audio Manager for Windows&reg; 7™
Configuration option tabs (vary with the audio devices connected)
Device advanced
settings
Information button
Exit button
Minimize button
Control settings
Set default device buttons
Connector settings
Analog and digital connector status
B. Realtek HD Audio Manager for Windows XP
Control settings
window
Exit button
Minimize button
Chapter 4
Configuration
options
Information button
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS P8Z77-V LK
4-15
4.4
Introduction to Intel&reg; 2012 Desktop
responsiveness technologies
This document details the overview of the installation and configuration procedures of the
Intel&reg; 2012 Desktop responsiveness technologies.
Intel&reg; 2012 Desktop responsiveness technologies feature the three technologies:
•
Intel&reg; Smart Response Technology
•
Intel&reg; Rapid Start Technology
•
Intel&reg; Smart Connect Technology
4.4.1
System Requirements for Intel&reg; 2012 Desktop
responsiveness technologies
In order for the system to run smoothly for the Intel&reg; 2012 Desktop responsiveness, you must
meet the following requirements:
1. CPU:
Intel&reg; 3rd/2nd generation Core Processor family
2. OS:
Windows&reg; 7 operating systems
3. SSD:
One dedicated SSD (Solid State Disk) to support Intel&reg; Smart Response and
Intel &reg; Rapid Start Technology is necessary.
Refer to the SSD Capacity Requirements table for the information of SSD size, partition
capacity, and system memory requirements.
4. HDD:
At least one HDD (Hard Disk Drive) for the system OS drive.
5. DRAM:
To enable Intel&reg; Rapid Start Technology, DRAM size smaller than 8GB is
required.
Ensure to enable the acceleration of Intel&reg; Smart Response Technology before
creating the partition for the Intel&reg; Rapid Start Technology.
Chapter 4
4-16
Chapter 4: Software support
SSD Capacity Requirements
SSD Partition Capacity
Requirements
2GB
4GB
8GB
Intel Rapid Start
2GB
4GB
8GB
Intel Smart Response
20GB
20GB
20GB
Intel&reg; Smart Response
and
Intel&reg; Rapid Start
Separate 20GB
and 2GB
partition
(SSD size &gt;
22GB)
Separate
20GB and 4GB
partition
(SSD size &gt;
24GB)
Separate
20GB and 8GB
partition
(SSD size &gt;
28GB)
Intel&reg; Smart Response,
Intel&reg; Rapid Start,
and
Intel&reg; Smart Connect
Separate 20GB
and 2GB partition
(SSD size &gt;
22GB)
Separate
20GB and 4GB
partition
(SSD size &gt;
24GB)
Separate 20GB
and 8GB
partition
(SSD size &gt;
28GB)
&reg;
Intel&reg; storage combinations
System DRAM
&reg;
The SSD used for Intel&reg; Rapid Start and Intel&reg; Smart Response is not allowed for creating RAID.
Due to OS behavior, Intel&reg; Rapid Start Technology works inefficiently with over 4G
system memory under Windows&reg; 7 32-bit operating system.
Only Intel&reg; internal SATA ports (gray and blue) support Intel&reg; 2012 Desktop responsiveness technologies.
The performance of Intel&reg; Smart Response Technology and Intel&reg; Rapid Storage Technology vary by the installed SSD.
Chapter 4
•
•
•
•
ASUS P8Z77-V LK
4-17
4.4.2
Intel&reg; Smart Response Technology
Intel&reg; Smart Response Technology boosts overall system performance. It uses an installed
fast SSD (min. 20GB available) as a cache for frequently accessed operations, speeding up
hard drive/main memory interaction. Key benefits are expedited hard drive speeds, reduced
load and wait times, and maximized storage utilization. Power consumption also goes down
by reducing unnecessary hard drive spin.
Before applying Intel&reg; Smart Response Technology, setting the SATA Mode BIOS item to
[RAID mode] in BIOS setup is necessary. Refer to section 3.5.3 SATA Configuration for
details
Installing Intel&reg; Smart Response Technology
1.
Place the support DVD to the optical drive. The Drivers installation tab appears if your
computer has enabled the Autorun feature.
2.
Click the Drivers tab, then click Intel&reg; Rapid Storage Technology Driver software.
3.
Follow the onscreen instructions to complete the installation.
Using the Intel&reg; Smart Response Technology
Chapter 4
4-18
1.
Click Accelerate to launch Smart
Response Technology settings.
2.
Select the SSD you want to use to accelerate your storage system.
b. Select the size allocated for SSD caching.
c. Select which HDD for caching.
d. Enhanced mode: WRITE THROUGH, write to SSD and HDD at the same time.
Maximized mode: WRITE BACK, write to SSD and write back to HDD in a later time.
Chapter 4: Software support
3.
Select Disable Acceleration to disable
this function, and select Change Mode to
switch acceleration mode to Enhanced/
Maximized.
&gt; 20GB) and • To enable Intel&reg; Smart Response Technology, you need at least one SSD ( =
a HDD, and only one SSD can be assigned for caching.
• If you want to restore the OS, go to BIOS Option ROM &gt; Acceleration Options and remove the Disks/Volume Acceleration to disable Intel&reg; Smart Response Technology.
Refer to Chapter 4, section Installing Serial ATA hard disk for the entry of BIOS Option ROM.
• The maximum caching size on the SSD is 64GB. If it exceeds, the storage capacity left out for caching can still be identified by the system for normal storage.
4.4.3
Intel&reg; Rapid Start Technology
Intel&reg; Rapid Start Technology allows you to quickly resume your computer from sleeping
mode. Saving your computer’s system memory to the configured SSD provides a faster
wake-up response time, but keeps the energy in a low profile.
•
Before applying Intel&reg; Rapid Start Technology, go to Advanced Mode &gt; Advanced &gt;
PCH Configuration in BIOS item, and enable Intel&reg; Rapid Start Technology.
•
Ensure to follow the procedure Creating a partition precisely to enable the Intel
Rapid Start function. Error message appears if you install the Intel&reg; Rapid Start Utility
before creating a partition.
•
Ensure to backup your data before using the Microsoft partition tool. Incorrect
partitioning process will result to data loss.
•
Adjusting the DRAM to a high frequency will result to unstable system performance.
1.
Go to Start, right-click Computer &gt; Manage &gt; Disk Management.
2.
Select the SSD that you want to create the partition.
ASUS P8Z77-V LK
Chapter 4
Creating a partition
4-19
3.
Right click the New Volume
that you want to shrink from,
and select Shrink Volume.
4.
If your SSD is not initialized and unformatted:
a. Right click the disk that you want to create the partition, and select Initialize.
b. Right click the unallocated volume, select New Simple Volume, and follow the
remaining steps.
If your SSD is smaller than 64GB, and is set to Full disk capacity caching option for Intel&reg;
Smart Response, you can not see any volume in the Disk Management. Ensure to set your
cache memory value of 18.6GB in Intel&reg; Smart Response to allow enough capacity for the
Intel&reg; Rapid Start partition.
5.
Key in the required partition
size, and must be equal to
the system DRAM memory
(1GB = 1024MB). Click
Shrink.
Go to Start &gt; Control
Panel &gt; System and
Security &gt; System, and
check the DRAM size
information.
Chapter 4
The unallocated volume is
allocated to the selected
disk.
4-20
Chapter 4: Software support
6.
To launch the disk partitioning tool, click Start &gt; Programs &gt; Accessories &gt;
Command Prompt tool.
7.
Type diskpart and press Enter.
8.
In the diskpart prompt, type
list disk after DISKPART,
and press Enter. Select the
disk with the unallocated
volume by typing select
disk x (x = disk number), and
press Enter .
•
•
9.
The value “x” refers to a disk number where you created the unallocated partition.
Refer to step 5 for details about the unallocated disk space in the SSD.
Type create partition
primary, and press Enter.
10. After creating a primary
partition, type detail
disk, and press Enter
to view the details of the
partitioned disk.
11.
Select the RAW volume
which has the same size
as the shrinked volume,
type select volume x
(x = number), and press
Enter to store the Intel&reg;
Rapid Start partition.
The value “x” refers to a disk number where you want to create the store partition.
Chapter 4
•
ASUS P8Z77-V LK
4-21
12. Type set id=84 override, press Enter, and wait for the “shrinking process” until
the Disk Management utility identifies a new partition called Hibernation Partition.
The Hibernation Partition does not appear when you choose “GPT (GUID Partition Table
store type”. Ensure the “Unallocated” disappears from the volume, and a new partition is
identified.
13. Reboot the system after creating the partition.
The partition for Intel&reg; Rapid Start Technology is incomplete if the computer is not rebooted,
and this results to function failure of Intel&reg; Rapid Start Technology.
Enabling and disabling the Intel&reg; Rapid Start Technology under the
OS
Install the Intel&reg; Rapid Start Technology first from your support DVD in order to launch the
Intel&reg; Rapid Start Manager.
After creating the partition, launch the Intel&reg; Rapid Start
Manager to enable or disable the Intel&reg; Rapid Start
Technology.
1.
Click the Show hidden icons arrow from the right
side of the task bar, and click Intel&reg; Rapid Start
Technology Manager icon.
Chapter 4
4-22
Chapter 4: Software support
2.
Tick On in the Status field to enable the function, and click Save.
Select and click to enable
or disable the function
Click to enable or
disable battery
saving mode. This
function only applies
to notebooks.
Click to enable or disable the timer. When enabled, move
the scroll bar to the desired time. When the system is
idle for more than the time period you set, the system
automatically goes into the Intel&reg; Rapid Start mode.
Default time is 10 minutes.
Click to save the Click to cancel the
settings made. settings made.
Recovering the partition
1.
Run the Command Prompt tool.
2.
Type diskpart and press Enter.
3.
At the diskpart prompt, type
list disk after DISKPART,
and press Enter.
4.
Select the disk (SSD) where the
Intel&reg; Rapid Start Technology
is installed for volume recovery,
type select disk x
(x = number), and press Enter.
Chapter 4
This procedure allows you to delete the Intel&reg; Rapid Start Technology from your system, and
recover the partition you made for the Intel Rapid&reg; Start Technology installation.
The value “x” refers to a disk number where you want to delete the store partition.
ASUS P8Z77-V LK
4-23
5.
Type list partition,
press Enter, and select the
partition where the Intel&reg;
Rapid Start Technology is
installed by typing select
partition x (x = number),
and press Enter.
The value “x” refers to a disk number where you want to delete the store partition.
6.
Type delete partition override, and press Enter. The diskpart utility deletes
the selected partition.
7.
In the desktop, click Start, right-click Computer, and click Manage.
8.
In the Computer Management window,
click Disk Management, right click the
shrinked new volume, and select Extend
Volume.
9.
As the Extend Volume Wizard appears,
click Next.
Chapter 4
4-24
Chapter 4: Software support
10. Click Next after selecting the default
selected disk.
11.
Extend volume setup is completed. Click Finish to recover the Intel&reg; Rapid Start
Technology partition.
12. Reboot the system after deleting the partition.
13. Go to Start &gt; Control Panel &gt; Programs &gt; Programs and Features &gt; to remove the
Intel&reg; Rapid Start Manager for the complete deletion of Intel&reg; Rapid Start Technology.
4.4.4
Intel&reg; Smart Connect Technology
The Intel&reg; Smart Connect Technology is a feature that provides the latest content updates
and energy efficiency to your computer’s platform.
Once installed and activated, the Intel&reg; Smart Connect Technology periodically wakes up the
system from sleeping mode, performs user state gathering, and initiates re-entry to sleeping
mode to wake-up after a set time interval.
•
Intel&reg; Smart Connect Technology supports Windows&reg; Live Mail, Microsoft Outlook, and
Seesmic applications.
•
It is necessary to enable the items of the PCH Configuration in the BIOS before
applying the Intel&reg; Smart Connect Technology. Go to Advanced Mode &gt; Advanced &gt;
PCH Configuration, and enable the Intel&reg; Smart Connect Technology.
1.
Place the support DVD to the optical drive.
2.
Go to Utilities, and click Intel&reg; Smart Connect Technology.
3.
As the setup wizard appears, click Next to begin the setup.
4.
Tick I accept the terms in the License Agreement, and click Next.
ASUS P8Z77-V LK
Chapter 4
Installing the Intel&reg; Smart Connect Technology
4-25
5.
Select all and click Next for
Custom Setup.
6.
Click Install to proceed the installation.
7.
Click Yes to restart your system, and for the newly installed Intel&reg; Smart Connect
Technology to take effect.
Using the Intel&reg; Smart Connect Technology
•
•
Before the system goes to sleep mode, ensure to keep your applications on the desktop, and enter the applications, passwords.
Ensure that the internet is in connection when enabling the Intel&reg; Smart Connect Technology.
1.
Click Start &gt; All Programs &gt; Intel &gt; Intel&reg; Smart Connect Technology.
2.
In the Basic tab, click Enable Updating. When enabled, the Advanced tab is
available for advanced function settings.
The Advanced tab is activated
when updating is enabled
Click to configure
the basic settings
Click to enable
or disable the
function
Click to view version
information and help topics
When updating is
enabled, click to
reset all settings
to default.
Chapter 4
When the scroll bar
is activated, adjust
the waking up time
period for Internet
data update.
4-26
Chapter 4: Software support
To disable the
updating function, click
Disable Updating.
Clicking this button
automatically disables
the configuration in the
Advanced tab. To reset
to defaults, click Reset
All to Defaults.
4.
In the Advanced tab,
set up the schedule
during low power usage
time period for power
saving. This setting only
applies to the assigned
time period.
5.
In the Help tab, click About to view the feature’s version. Click Topics to learn more
about the Intel&reg; Smart Connect Technology and its configuration.
Chapter 4
3.
ASUS P8Z77-V LK
4-27
4.5
RAID configurations
The motherboard supports the following SATA RAID solutions:
•
Intel&reg; Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support.
4.5.1
•
You must install Windows&reg; XP Service Pack 3 or Windows&reg; 64-bit XP / 7 / 64-bit 7
operating systems (OS) before using Serial ATA hard disk drives. The Serial ATA RAID
feature is available only if you are using Windows&reg; XP SP3 or Windows&reg; 64-bit XP / 7
/ 64-bit 7 operating systems (OS) .
•
Due to Windows&reg; XP limitation, a RAID array with the total capacity over 2TB cannot
be set as a boot disk. A RAID array over 2TB can only be set as a data disk only.
•
If you want to install a Windows&reg; operating system to a hard disk drive included in a
RAID set, you have to create a RAID driver disk and load the RAID driver during OS
installation. Refer to section 4.5 Creating a RAID driver disk for details.
RAID definitions
RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in
parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a
sustained data transfer rate, double that of a single disk alone, thus improving data access
and storage. Use of two new identical hard disk drives is required for this setup.
RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to
a second drive. If one drive fails, the disk array management software directs all applications
to the surviving drive as it contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the entire system. Use
two new drives or use an existing drive and a new drive for this setup. The new drive must be
of the same size or larger than the existing drive.
RAID 5 stripes both data and parity information across three or more hard disk drives. Among
the advantages of RAID 5 configuration include better HDD performance, fault tolerance, and
higher storage capacity. The RAID 5 configuration is best suited for transaction processing,
relational database applications, enterprise resource planning, and other business systems.
Use a minimum of three identical hard disk drives for this setup.
RAID 10 is data striping and data mirroring combined without parity (redundancy data) having
to be calculated and written. With the RAID 10 configuration you get all the benefits of both
RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive
and three new drives for this setup.
Chapter 4
4-28
Chapter 4: Software support
4.5.2
Installing Serial ATA hard disks
The motherboard supports Serial ATA hard disk drives. For optimal performance, install
identical drives of the same model and capacity when creating a disk array.
To install the SATA hard disks for a RAID configuration:
1.
Install the SATA hard disks into the drive bays.
2.
Connect the SATA signal cables.
3.
Connect a SATA power cable to the power connector on each drive.
4.5.3
Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s) using
SATA HDDs. To do this:
1.
Enter the BIOS Setup during POST.
2.
Go to the Advanced menu &gt; SATA Configuration, and then press &lt;Enter&gt;.
3.
Set the SATA Mode item to [RAID Mode].
4.
Save your changes, and then exit the BIOS Setup.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
Due to chipset limitation, when set any of SATA ports to RAID mode, all SATA ports run at
RAID mode together.
4.5.4
Intel&reg; Rapid Storage Technology Option ROM utility
To enter the Intel&reg; Rapid Storage Technology Option ROM utility:
1.
Turn on the system.
2.
During POST, press &lt;Ctrl&gt; + &lt;I&gt; to display the utility main menu.
Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
1. Create RAID Volume
4. Recovery Volume Options
2. Delete RAID Volume
5. Acceleration Options
3. Reset Disks to Non-RAID
6. Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
None defined.
Physical Devices:
Port Device Model
0
ST3160812AS
1
ST3160812AS
2
ST3160812AS
3
ST3160812AS
[↑↓]-Select
ASUS P8Z77-V LK
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
[ESC]-Exit
Size
149.0GB
149.0GB
149.0GB
149.0GB
Chapter 4
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
[ENTER]-Select Menu
4-29
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
The utility supports maximum four hard disk drives for RAID configuration.
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press &lt;Enter&gt;. The
following screen appears:
Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0
GB
N/A
Create Volume
[ HELP ]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change
[TAB]-Next
[ESC]-Previous Menu
[ENTER]-Select
2.
Enter a name for the RAID set and press &lt;Enter&gt;.
3.
When the RAID Level item is selected, press the up/down arrow key to select a RAID
level to create, and then press &lt;Enter&gt;.
4.
When the Disks item is selected, press &lt;Enter&gt; to select the hard disk drives you want
to include in the RAID set. The SELECT DISKS screen appears:
[ SELECT DISKS ]
Chapter 4
Port
0
1
2
3
Drive Model
ST3160812AS
ST3160812AS
ST3160812AS
ST3160812AS
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
Size
149.0GB
149.0GB
149.0GB
149.0GB
Status
Non-RAID
Non-RAID
Non-RAID
Non-RAID
Disk
Disk
Disk
Disk
Select 2 to 6 disks to use in creating the volume.
[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
4-30
Chapter 4: Software support
5.
Use the up/down arrow key to select a drive, and then press &lt;Space&gt; to select. A small
triangle marks the selected drive. Press &lt;Enter&gt; after completing your selection.
6.
Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10
and 5 only),and then press &lt;Enter&gt;. The available stripe size values range from 4KB
to 128KB. The following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB
We recommend a lower stripe size for server systems, and a higher stripe size for
multimedia computer systems used mainly for audio and video editing.
7.
When the Capacity item is selected, enter the RAID volume capacity that you want
and press &lt;Enter&gt;. The default value indicates the maximum allowed capacity.
8.
When the Create Volume item is selected, press &lt;Enter&gt;. The following warning
message appears:
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
Press &lt;Y&gt; to create the RAID volume and return to the main menu, or &lt;N&gt; to go back
to the CREATE VOLUME menu.
Chapter 4
9.
ASUS P8Z77-V LK
4-31
Deleting a RAID set
Take caution when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1.
From the utility main menu, select 2. Delete RAID Volume and press &lt;Enter&gt;. The
following screen appears:
Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ DELETE VOLUME MENU ]
Name
Volume0
Level
RAID0(Stripe)
Drives
2
Capacity
298.0GB
Status
Normal
Bootable
Yes
[ HELP ]
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[↑↓]-Select
2.
[ESC]-Previous Menu
[DEL]-Delete Volume
Use the up/down arrow key to select the RAID set you want to delete, and then press
&lt;Del&gt;. The following warning message appears:
[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete volume “Volume0”? (Y/N):
3.
Press &lt;Y&gt; to delete the RAID set and return to the utility main menu, or press &lt;N&gt; to
return to the DELETE VOLUME menu.
Exiting the Intel&reg; Rapid Storage Technology Option ROM utility
Chapter 4
To exit the utility:
1.
From the utility main menu, select 5. Exit, and then press &lt;Enter&gt;. The following
warning message appears:
[ CONFIRM EXIT ]
Are you sure you want to exit? (Y/N):
2.
4-32
Press &lt;Y&gt; to exit or press &lt;N&gt; to return to the utility main menu.
Chapter 4: Software support
4.6
Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing a Windows&reg; operating system
on a hard disk drive that is included in a RAID set.
4.6.1
•
The motherboard does not provide a floppy drive connector. You have to use a
USB floppy disk drive when creating a SATA RAID driver disk.
•
Windows&reg; XP may not recognize the USB floppy disk drive due to Windows&reg; XP
limitation. To work around this OS limitation, refer to section 4.5.4 Using a USB
floppy disk drive.
Creating a RAID driver disk without entering the OS
To create a RAID driver disk without entering the OS:
1.
Boot your computer.
2.
Press &lt;Del&gt; during POST to enter the BIOS setup utility.
3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5.
Save changes and exit BIOS.
6. When the Make Disk menu appears, press &lt;1&gt; to create a RAID driver disk.
7. Insert a formatted floppy disk into the USB floppy disk drive, then press &lt;Enter&gt;.
8. Follow the succeeding screen instructions to complete the process.
4.6.2
Creating a RAID driver disk in Windows&reg;
To create a RAID driver disk in Windows&reg;:
1.
Start Windows&reg;.
2. Plug the USB floppy disk drive and insert a floppy disk.
3. Place the motherboard support DVD into the optical drive.
4. Go to the Make Disk menu, and then click Intel AHCI/RAID Driver Disk to create a
RAID driver disk.
5. Select USB floppy disk drive as the destination disk.
6. Follow the succeeding screen instructions to complete the process.
Chapter 4
Write-protect the floppy disk to avoid a computer virus infection.
ASUS P8Z77-V LK
4-33
4.6.3
Installing the RAID driver during Windows&reg; OS installation
To install the RAID driver in Windows&reg; XP:
1. During the OS installation, the system prompts you to press the F6 key to install thirdparty SCSI or RAID driver.
2. Press &lt;F6&gt;, and then insert the floppy disk with RAID driver into the USB floppy disk drive.
3.
When prompted to select the SCSI adapter to install, select the RAID driver for the
corresponding OS version.
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver for Windows&reg; 7 or later OS:
1.
During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
2. Insert the USB flash drive with RAID driver into the USB port or the support DVD into
the optical drive, and then click Browse.
3. Click the name of the device you’ve inserted, go to Drivers &gt; RAID, and then select
the RAID driver for the corresponding OS version. Click OK.
4. Follow the succeeding screen instructions to complete the installation.
Before loading the RAID driver from a USB flash drive, you have to use another computer
to copy the RAID driver from the support DVD to the USB flash drive.
Chapter 4
4-34
Chapter 4: Software support
4.6.4
Using a USB floppy disk drive
Due to OS limitation, Windows&reg; XP may not recognize the USB floppy disk drive when you
install the RAID driver from a floppy disk during the OS installation.
To solve this issue, add the USB floppy disk drive’s Vendor ID (VID) and Product ID (PID) to
the floppy disk containing the RAID driver. Refer to the steps below:
1.
Using another computer, plug the USB floppy disk drive, and insert the floppy disk
containing the RAID driver.
2.
Right-click My Computer on the
Windows&reg; desktop or start menu,
and then select Manage from the
pop-up window.
or
3.
Select Device Manager. From the
Universal Serial Bus controllers,
right-click xxxxxx USB Floppy, and
then select Properties from the pop-up
window.
4.
Click Details tab. The Vendor ID (VID)
and Product ID (PID) are displayed.
5.
Browse the contents of the RAID driver
disk to locate the file txtsetup.oem.
6.
Double-click the file. A window appears,
allowing you to select the program for
opening the oem file.
ASUS P8Z77-V LK
Chapter 4
The name of the USB floppy disk
drive varies with different vendors.
4-35
7.
Use Notepad to open the file.
8.
Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and
[HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem
file.
9.
Type the following line to the bottom of the two sections:
id = “USB\VID_xxxx&amp;PID_xxxx”, “usbstor”
[HardwareIds.scsi.iaAHCI_DesktopWorkstationServer]
id= “PCI\VEN_8086&amp;DEV_1C02&amp;CC_0106”,”iaStor”
id= “USB\VID_03EE&amp;PID_6901”, “usbstor”
[HardwareIds.scsi.iaStor_DesktopWorkstationServer]
id= “PCI\VEN_8086&amp;DEV_2822&amp;CC_0104”,”iaStor”
id= “USB\VID_03EE&amp;PID_6901”, “usbstor”
Add the same line to both sections.
The VID and PID vary with different vendors.
Chapter 4
10. Save and exit the file.
4-36
Chapter 4: Software support
Chapter 5
Chapter 5:
Multiple GPU technology support
5.1
ATI&reg; CrossFireX™ technology
The motherboard supports the ATI&reg; CrossFireX™ technology that allows you to install
multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in
this section.
5.1.1
Requirements
•
In Dual CrossFireX mode, you should have two identical CrossFireX-ready graphics
cards or one CrossFireX-ready dual-GPU graphics card that are ATI&reg; certified.
•
Ensure that your graphics card driver supports the ATI CrossFireX technology.
Download the latest driver from the AMD website (www.amd.com).
•
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system. See Chapter 2 for details.
5.1.2
•
We recommend that you install additional chassis fans for better thermal environment.
•
Visit the ATI Game website (http://game.amd.com) for the latest certified graphics card
and the supported 3D application list.
Before you begin
For ATI CrossFireX to work properly, you have to uninstall all existing graphics card drivers
before installing ATI CrossFireX graphics cards to your system.
To uninstall existing graphics card drivers:
1.
Close all current applications.
2.
For Windows XP, go to Control Panel &gt; Add/Remove Programs.
3.
Select your current graphics card driver/s.
4.
For Windows XP, select Add/Remove.
5.
Turn off your computer.
ASUS P8Z77-V LK
5-1
5.1.3
Installing two CrossFireX™ graphics cards
The following pictures are for reference only. The graphics cards and the motherboard
layout may vary with models, but the installation steps remain the same.
Chapter 5
1.
Prepare two CrossFireX-ready graphics
cards.
2.
Insert the two graphics card into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3.
Ensure that the cards are properly
seated on the slots.
4.
Align and firmly insert the CrossFireX
bridge connector to the goldfingers on
each graphics card. Ensure that the
connector is firmly in place.
CrossFireX bridge
(bundled with
graphics cards)
5-2
5. Connect two independent auxiliary power
sources from the power supply to the two
graphics cards separately.
6.
Connect a VGA or a DVI cable to the
graphics card.
goldfingers
Chapter 5: Multiple GPU technology support
5.1.4
Installing the device drivers
Refer to the documentation that came with your graphics card package to install the device
drivers.
5.1.5
Chapter 5
Ensure that your PCI Express graphics card driver supports the ATI&reg; CrossFireX™
technology. Download the latest driver from the AMD website (www.amd.com).
Enabling the ATI&reg; CrossFireX™ technology
After installing your graphics cards and the device drivers, enable the CrossFireX™ feature
through the ATI Catalyst™ Control Center in Windows environment.
Launching the ATI Catalyst Control Center
To launch the ATI Catalyst Control Center:
1.
Right-click on the Windows&reg; desktop and select
Catalyst(TM) Control Center. You can also
right-click the ATI icon in the Windows notification
area and select Cayalist Control Center.
2.
The Catalyst Control Center Setup
Assistant appears when the system
detects the existance of multi-graphics
cards. Click Go to continue to the
Catalyst Control Center Advanced
View window.
Enabling Dual CrossFireX
technology
1.
In the Catalyst Control Center window,
click Graphics Settings &gt; CrossFireX &gt;
Configure.
2.
From the Graphics Adapter list, select
the graphics card to act as the display
GPU.
3.
Select Enable CrossFireX.
4.
Click Apply, and then click OK to exit
the window.
ASUS P8Z77-V LK
2
3
1
4
5-3
5.2
NVIDIA&reg; SLI™ technology
Chapter 5
The motherboard supports the NVIDIA&reg; SLI™ (Scalable Link Interface) technology that
allows you to install multi-graphics processing units (GPU) graphics cards. Follow the
installation procedures in this section.
5.2.1
Requirements
•
In SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA&reg;
certified.
•
Ensure that your graphics card driver supports the NVIDIA SLI technology. Download
the latest driver from the NVIDIA website (www.nvidia.com).
•
Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system. See Chapter 2 for details.
5.2.2
•
We recommend that you install additional chassis fans for better thermal environment.
•
Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics
card and supported 3D application list.
Installing two SLI-ready graphics cards
The following pictures are for reference only. The graphics cards and the motherboard
layout may vary with models, but the installation steps remain the same.
5-4
1. Prepare two SLI-ready graphics cards.
2.
Insert the two graphics card into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 2 in this user manual
for the locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3.
Ensure that the cards are properly seated
on the slots.
Chapter 5: Multiple GPU technology support
Align and firmly insert the SLI bridge connector to the goldfingers on each graphics
card. Ensure that the connector is firmly in place.
5. Connect two independent auxiliary power sources from the power supply to the two
graphics cards separately.
6.
Connect a VGA or a DVI cable to the graphics card.
Chapter 5
4.
SLI bridge
Goldfingers
5.2.3
Installing the device drivers
Refer to the documentation that came with your graphics card package to install the device
drivers.
Ensure that your PCI Express graphics card driver supports the NVIDIA&reg; SLI™ technology.
Download the latest driver from the NVIDIA website (www.nvidia.com).
5.2.4
Enabling the NVIDIA&reg; SLI™ technology
After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA&reg;
Control Panel under the Windows&reg; 7™ operating system.
Launching the NVIDIA Control Panel
You can launch the NVIDIA Control Panel by the following two methods.
A.
Right click on the empty space of the Windows&reg; desktop
and select NVIDIA Control Panel.
The NVIDIA Control Panel window appears (See Step B5).
ASUS P8Z77-V LK
5-5
B1. If you cannot see the NVIDIA Control Panel item in step
(A), select Personalize.
Chapter 5
B2. From the Personalization window,
select Display Settings.
B3. From the Display Settings dialog box,
click Advanced Settings.
5-6
Chapter 5: Multiple GPU technology support
Chapter 5
B4. Select the NVIDIA GeForce tab, and
then click Start the NVIDIA Control
Panel.
B5. The NVIDIA Control Panel window
appears.
Enabling SLI settings
From the NVIDIA Control Panel window, select
Set SLI Configuration. Click Enable SLI
and set the display for viewing SLI rendered
content. When done, click Apply.
ASUS P8Z77-V LK
5-7
5.3
LucidLogix&reg; Virtu MVP™
Chapter 5
LucidLogix&reg; Virtu MVP™ allows your computer’s VGA output and discrete graphic cards
to perform better, respond faster and process media files smoother within a low power
environment. Its GPU virtualization assigns tasks to the best available graphic source while
the newly-designed Virtual Vsync gives you a smoother gaming experience.
5.3.1
•
LucidLogix&reg; Virtu MVP™ supports Windows 7&reg; operating systems.
•
Intel&reg; Quick Sync Video feature is supported by the 3rd/2nd generation Intel&reg;
Core™ processor family.
•
iGPU Multi-Monitor support option must be enabled in BIOS and install
both Intel&reg; Graphics Accelerator, and graphics card driver before installing
LucidLogix Virtu MVP from ASUS support DVD. Refer to 3.5.4 System
Configuration for details.
•
Hyperformance&reg; and Virtual Sync are enabled when using more than one
discrete GPU at the same time.
•
Supports NVIDIA&reg; GF4xx/5xx series and AMD&reg; HD5xxx/6xxx series graphic
cards.
•
We do not recommended to use LucidLogix&reg; Virtu MVP™ under RAID
mode.
Installing LucidLogix&reg; Virtu MVP™
To install LucidLogix&reg; Virtu MVP™:
1.
Insert the support DVD in the optical drive. The ASUS Support Wizard appears if your
computer has enabled the Autorun feature.
2.
Click the Utilites tab, then click LucidLogix&reg; Virtu MVP™ Software.
3.
Follow the succeeding onscreen instructions to complete the installation.
After you successfully installed the LucidLogix&reg; Virtu MVP™, the LucidLogix Virtu MVP
icon appears in the notification area.
5-8
Chapter 5: Multiple GPU technology support
5.3.2
Setting up your display
LucidLogix Virtu MVP™ solution comes with two distinct modes that allows you to enjoy
better graphics either from your built-in video output (i-Mode) or from a discrete graphics
card (d-Mode).
Chapter 5
&reg;
i-Mode
To use LucidLogix&reg; Virtu MVP™ in i-Mode, the display must be connected to the onboard
video output.
Ensure to set the Primary Display to iGPU in BIOS to activate i-Mode support.
d-Mode
To use LucidLogix&reg; Virtu MVP™ in d-Mode, the display must be connected to the installed
graphics card.
•
Ensure to set the Primary Display to PCIE or PCIE/PCI in BIOS to enable
d-Mode support.
•
d-Mode is recommended for an enhanced 3D gaming performance.
i-Mode (VGA output
from motherboard)
d-Mode (VGA output from
discrete graphics card)
The motherboard’s IO ports and discrete graphic card is for reference only and may vary in
different models.
ASUS P8Z77-V LK
5-9
5.3.3 Configuring LucidLogix&reg; Virtu MVP™
Launch the Virtu MVP Control Panel to allow you to configure the main features, adjust the
performance settings and select applications for graphical virtualization.
Chapter 5
To open the control panel, right-click LucidLogix&reg; Virtu MVP™ icon in the notification area
and select Open Virtu MVP Control Panel.
LucidLogix Virtu MVP is automatically activated when your system is powered on. Select
Remove from system tray if you want to remove LucidLogix Virtu MVP icon from the
notification area.
Main
Allows you to turn ON/OFF the GPU virtualization. Also from the Main tab, you can set to
show or hide the In-Game icon.
Click to turn ON/OFF the LucidLogix Virtu MVP
Click to restore to default
settings
5-10
Tick to show icon
in system tray
Select display
option for In-Game
icon
Chapter 5: Multiple GPU technology support
Performance
Chapter 5
Allows you to turn ON/OFF the Hyperformance&reg; or Virtual Vsync function.
Click to turn
Hyperformance&reg;
ON or OFF
Click to turn
Virtual Vsync
ON or OFF
ASUS P8Z77-V LK
5-11
Applications
Allows you to select applications for graphic virtualization.
Chapter 5
Click to select a program to run by
discrete card, iGPU, or Hyperformance&reg;
Click to add, edit, or remove programs
See the descriptions of these columns below:
•
D column allows you to run applications with the discrete graphic card. Select D to
enable 3D graphical performance for that application.
•
I column allows to run applications with iGPU. Select I for applications with media
extensive performance.
•
H column allows you to run applications with Hyperformance&reg;. Tick H to enhance
graphical performance for that application.
Actual graphical performance varies with the application used and graphics card installed.
5-12
Chapter 5: Multiple GPU technology support
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B speciﬁcations. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian
interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Appendices
Cut appareil num&eacute;rique de la Classe B est conforme &agrave; la norme NMB-003 du Canada.
Cet appareil num&eacute;rique de la Classe B respecte toutes les exigences du R&egrave;glement sur le
mat&eacute;riel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interf&eacute;rences et
(2) cet appareil doit accepter toute interf&eacute;rence, y compris celles susceptibles de provoquer
un fonctionnement non souhait&eacute; de l’appareil.
ASUS P8Z77-V LK
A-1
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
Appendices
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly
recycle our products, batteries, other components as well as the packaging materials. Please
go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different
regions.
A-2
Appendices
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone Fax E-mail
Web site
Technical Support
Telephone Online support
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
[email protected]
www.asus.com.tw
+86-21-38429911
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
Web site
Technical Support
Telephone Support fax
Online support
800 Corporate Way, Fremont, CA 94539, USA
+1-812-282-3777
+1-510-608-4555
usa.asus.com
+1-812-282-2787
+1-812-284-0883
support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Technical Support
Telephone
Support Fax
Online support
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911
www.asus.de
www.asus.de/sales
+49-1805-010923*
+49-2102-9599-11
support.asus.com
Appendices
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
ASUS P8Z77-V LK
A-3
(510)739-3777/(510)608-4555
800 Corporate Way, Fremont, CA 94539.
Asus Computer International
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Address, City:
Country:
Model name :
Signature :
Date :
Representative Person’s Name :
Mar. , 2012
Steve Chang / President
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Supplementary Information:
EN 60950-1 / A11:2009
EN 60065:2002 / A12:2011
EN 60065:2002+A1:2006+A11:2008
EN 301 489-1 V1.8.1(2008-04)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.3.1(2002-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.1.1(2009-05)
EN 301 489-24 V1.4.1(2007-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.3.1(2006-05)
EN 302 623 V1.1.1(2009-01)
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007
Jerry Shen
Signature : __________
Name :
Position : CEO
(EC conformity marking)
EN 62301:2005
Regulation (EC) No. 278/2009
Year to begin affixing CE marking:2012
Declaration Date: Mar. 12, 2012
CE marking
EN 62301:2005
Regulation (EC) No. 642/2009
EN 62301:2005
Regulation (EC) No. 1275/2008
2009/125/EC-ErP Directive
EN 60950-1 / A12:2011
2006/95/EC-LVD Directive
EN 300 328 V1.7.1(2006-10)
EN 300 440-1 V1.4.1(2008-05)
EN 300 440-2 V1.2.1(2008-03)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V3.2.1(2007-05)
EN 301 908-2 V3.2.1(2007-05)
EN 301 893 V1.4.1(2005-03)
EN 302 544-2 V1.1.1(2009-01)
EN 50360:2001
EN 50371:2002
EN 50385:2002
1999/5/EC-R &amp;TTE Directive
EN 55022:2010
EN 61000-3-2:2006+A1:2009+A2: 2009
EN 55013:2001+A1:2003+A2:2006
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
Motherboard
P8Z77-V LK
Product name :
Ver. 111121
TAIWAN
Authorized representative in Europe:
declare the following apparatus:
No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C.
Country:
ASUSTek COMPUTER INC.
Address, City:
FCC Part 15, Subpart E, Intentional Radiators
Ver. 110101
Manufacturer:
EC Declaration of Conformity
We, the undersigned,
FCC Part 15, Subpart C, Intentional Radiators
FCC Part 15, Subpart B, Unintentional Radiators
Model Number : P8Z77-V LK
Conforms to the following specifications:
Product Name : Motherboard
hereby declares that the product
Phone/Fax No:
Address:
Responsible Party Name:
Per FCC Part 2 Section 2. 1077(a)
DECLARATION OF CONFORMITY
Appendices
A-4
Appendices
">
Hallo! Ik ben een AI-chatbot die specifiek is getraind om u te helpen met de Asus P8Z77-V LK Computer Hardware User manual. Ik heb het document grondig doorgenomen en kan u helpen de exacte informatie te vinden die u nodig heeft of de inhoud in duidelijke en eenvoudige bewoordingen uit te leggen. Of u nu op zoek bent naar begeleiding bij specifieke functies, stappen voor probleemoplossing of algemeen gebruik, stel gerust uw vragen. Hoe meer details u verstrekt over uw zorgen of behoeften, hoe nauwkeuriger en effectiever ik u kan helpen!
Assistent aan het typen
Assistent is niet meer aan het toetsenbord. Probeer het later opnieuw.
Het lijkt erop dat u een document hebt bereikt dat in meerdere talen is geschreven, waaronder een die niet uw moedertaal is. U kunt de volgende links gebruiken om tijdelijk pagina''s te verbergen zonder de taal van uw voorkeur.
Advertentie
Belangrijkste functies

Intel LGA 1155 (Socket H2) Intel® Core™ i3, Intel® Core™ i5, Intel® Core™ i7
PC ATX Intel Z77 Realtek ALC892 7.1 channels
DDR3-SDRAM 4 DIMM Non-ECC Maximum internal memory: 32 GB
SATA II, SATA III
2-Way CrossFireX, 2-Way SLI, 3-Way CrossFireX, LucidLogix Virtu, Quad-GPU CrossFireX, Quad-GPU SLI Intel HD Graphics 1696
BIOS type: EFI 64 Mbit ACPI version: 2.0a Clear CMOS jumper
Gigabit Ethernet