ADC Advantage™ 6012N Instructions for use

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 1

Semi-Automatic

Blood Pressure

Monitor

6012N

Instructions for Use

Onbo Electronic (Shenzhen) Co., Ltd.

No 138 Huasheng Road

Langkou Community, Dalang Street

Longhua District, Shenzhen, China

Microlife UAB

P. Luksio g. 32

08222 Vilnius, Lithuania

Mfg. for: ADC ®

Hauppauge, NY 11788

Inspected in the USA

Made in China tel: 631-273-9600 toll free: 1-800-232-2670 fax: 631-273-9659 www.adctoday.com email: [email protected]

0044

IB p/n 93-6012N-00 rev 2 (05/06/2021) Printed in China

PLEASE NOTE:

THIS MEDICAL INSTRUMENT MUST BE

USED ACCORDING TO INSTRUCTIONS

TO ENSURE ACCURATE READINGS.

Questions?

Call ADC toll free at 1-800-232-2670

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 2

2

Semi-Automatic Blood Pressure Monitor

Table of Contents

I. A Special Thank You

1. INTRODUCTION AND INTENDED USE 4

2. WARNINGS AND PRECAUTIONS 6

3. ABOUT BLOOD PRESSURE 7

3.1 What Is Blood Pressure? 7

3.2

What Is a Normal Blood Pressure? 7

3.3

What Influences Blood Pressure? 8

3.4

Does Blood Pressure Vary? 8

3.5

What Is Hypertension? 9

3.6

Can Hypertension Be Controlled? 9

3.7

Why Measure Blood Pressure at Home? 10

3.8

How Is Blood Pressure Measured? 11

3.9

How Should I Record My Blood Pressure? 11

4. COMPONENTS OF YOUR BLOOD PRESSURE MONITOR 12

5. SETTING UP YOUR BLOOD PRESSURE MONITOR 12

5.1 Inserting the Batteries 12

5.2 Cuff Connection 13

6. MEASUREMENT PROCEDURE 13

6.1

Fitting the Cuff 14

6.2 Measurement Procedure 15

6.3 Reading Measurement Results 16

6.4 Inflating Further 16

6.5 Discontinuing Measurement 16

6.6 Irregular Heartbeat Detector 17

14. HOW TO CONTACT US

To register your product and obtain further detailed user information about our products and services visit us at: www.adctoday.com and follow the links.

For questions, comments, or suggestions call us toll free at:

1-800-232-2670

American Diagnostic Corporation

55 Commerce Drive, Hauppauge, New York 11788

Telephone: 631-273-9600 • Fax: 631-273-9659

Email: [email protected]

23

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 3

11. WARRANTY

This blood pressure monitor is warranted for five years from date of

purchase. This warranty includes the instrument and the cuff. The

warranty does not apply to damage caused by improper handling,

accidents, improper use, or alterations made to the instrument by

third parties. The warranty is only valid after the product is registered

online at www.adctoday.com/support/warranty-registration .

12. QUALITY STANDARDS

Device standard:

This device is manufactured to meet the European and United States standards for non-invasive blood pressure monitors:

EN1060-1 • EN1060-3 • EN1060-4

Electromagnetic compatibility:

Device fulfills the stipulations of the International standard IEC60601-1-2

13. SYMBOL DEFINITIONS

Symbol Definition

Important Warning/Caution

Not made with natural

rubber latex

Circumference Size

Conforms to EU Standards

Read operating instructions

Type BF Equipment

Symbol Definition

Authorized European

Representative’s Information

Manufacturer’s Information

°

F Temperature Limit

Humidity Limitation

Batteries and electronic devices

must be disposed of in

accordance with the local

applicable regulations, not

with domestic waste.

22

7. MEMORY FUNCTION 17

8. ERROR MESSAGES/TROUBLESHOOTING 18

9. CARE AND MAINTENANCE 20

10. TECHNICAL SPECIFICATIONS 21

11. WARRANTY 22

12. QUALITY STANDARDS 22

13. SYMBOL DEFINITIONS 22

14. HOW TO CONTACT US 23

3

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 4

4

I. A SPECIAL THANK YOU

Congratulations on your purchase of an ADC ® Advantage™ Semi-

Automatic Blood Pressure Monitor.

In hospitals and physician's offices throughout the world, where accuracy and dependability are critical, ADC professional diagnostic products are the instruments of choice.

Now you, too, can enjoy the benefits of ADC engineering and quality in the home. This feature rich instrument was designed to simplify the measurement of blood pressure and pulse rate at home and deliver consistent, dependable results.

Read this booklet thoroughly before attempting to use your new ADC

Advantage Semi-Automatic Blood Pressure Monitor.

1. INTRODUCTION AND INTENDED USE

Your ADC Advantage blood pressure monitor is a semi-automatic digital blood pressure measuring device for use on the upper arm. It enables very fast and reliable measurement of the systolic and diastolic blood pressure as well as the pulse by way of the oscillometric method. This device offers clinically proven accuracy and has been designed to be user friendly.

Read this booklet thoroughly before attempting to use your new ADC

Advantage Semi-Automatic Blood Pressure Monitor.

Remember…

• Only a healthcare professional is qualified to interpret blood pressure measurements. This device is NOT intended to replace regular medical checkups.

10. TECHNICAL SPECIFICATIONS

Weight: .96 lbs. (436 g) (with batteries + cuff)

Size: 3.75” x 4.25” x 5.5”

85mm x 77mm x 140mm (including cuff)

Storage temperature: -4 to 131°F (-20 to 55 °C)

Humidity: 15 to 90% relative maximum humidity

Operation temperature: 50°F to 104°F (10°C to 40°C)

Display: LCD (Liquid Crystal Display)

Measuring method: Oscillometric

Pressure sensor: Capacitive

Measuring range: Rated range of the determined - blood pressure

SYS: 60-255mmHg

DIA: 40-200mmHg

40-200 beats per minute - pulse

Cuff pressure display range: 0-299 mmHg

Memory: Automatically stores the last measurement.

Measuring resolution: 1 mmHg

Accuracy: Pressure within ± 3 mmHg or 2% of

the reading

≥

200mmHg

Pulse ± 5 % of the reading

Power source: 4 AA batteries

Includes: Semi-automatic Blood Pressure Monitor Model

6012N, Adult cuff with tubing and bulb, 4

AA batteries, Instruction Book, and Record

Book.

A large adult cuff is also available for the

Advantage TM Semi=Automatic Blood Pressure

Monitor.

Item No Size Range

850-6012N Adult 8.7−12.6” (22−32 cm)

850-6022NX Lg. Adult 12.5−20.4” (32−52 cm)

21

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 5

Attention!

Should any technical malfunctions arise with the blood pressure monitor, please contact the dealer where you bought the device or ADC. Never attempt to repair the instrument yourself!

Any unauthorized opening of the instrument invalidates all warranty claims.

9. CARE AND MAINTENANCE

Do not expose the device to extreme temperatures, humidity, dust, or direct sunlight.

Handle the cuff carefully and avoid all types of stress through twisting or buckling in order not to damage the sensitive air-tight bubble.

Clean the device with a soft, dry cloth. Do not use gas, thinners, or similar solvents. Spots on the cuff can be removed carefully with a damp cloth and soapsuds. Do not submerge the cuff in water!

Handle the tubing carefully.

Keep the tube away from sharp edges.

Do not drop the monitor or treat it roughly in any way.

Never open the monitor!

This invalidates the manufacturer’s warranty.

20

Note: According to international standards, your monitor should be checked for calibration every two years. Contact ADC for an accuracy check.

• It is recommended that your physician review your procedure for

using this device.

• Blood pressure readings obtained by this device should be verified

before prescribing or making adjustments to any medications used

to control hypertension. Under no circumstances should YOU alter

the dosages of any drugs prescribed by your doctor.

• This monitor is intended for use by adults only. Consult with a

physician before using this instrument on a child.

• In cases of irregular heartbeat (arrhythmia), measurements

made with this instrument should only be evaluated after

consultation with your doctor.

• Familiarize yourself with the section titled "About Blood Pressure."

It contains important information on the dynamics of blood

pressure readings and will help you to obtain the best results.

5

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 6

6

2. WARNINGS AND PRECAUTIONS

Warning: The device contains sensitive electronic components. Avoid

strong electrical or electromagnetic fields in the direct vicinity of the

device (e.g., mobile telephones, microwave ovens). These can lead to

temporary impairment of the measuring accuracy.

Warning: Use of this instrument on patients under dialysis therapy or

on anticoagulant, antiplatelets, or steroids could cause internal

bleeding.

Warning: Do not use cuffs or batteries other than those included with

this product or replacement parts supplied by the manufacturer.

Warning: This system may fail to yield specified measurement

accuracy if operated or stored in temperature or humidity conditions

outside the limits stated in the specifications section of this manual.

Caution: The standard material used is latex-free.

Attention: Self-measurement means control, not diagnosis or

treatment. Unusual values must always be discussed with your doctor.

Under no circumstances should you alter the dosages of any drugs

prescribed by your doctor.

Attention: The pulse display is not suitable for checking the frequency

of heart pacemakers!

Attention: In cases of irregular heartbeat, measurements made with this

instrument should only be evaluated after consultation with your doctor.

NOTE: To obtain the greatest accuracy from your blood pressure

instrument, it is recommended that the instrument be used within a

temperature range of 50°F (10°C) to 104°F (40°C), with a 15-90%

relative humidity.

Other possible errors and their solutions

If problems occur when using this device, the following points should be checked.

Malfunction Remedy

The display remains blank when the device is switched on though the batteries are in place.

1. Check battery installation/ polarity.

2. Remove the batteries and if the display is unusual, then exchange them for new ones.

The pressure does not rise although the inflation bulb is being pumped.

The device frequently fails to measure, or the values measured are too low or high.

Check the connection of the cuff tube and connect properly.

1. Fit the cuff correctly on the arm.

2. Before starting measurement make sure that clothing is not exerting pressure on the arm. Take articles of clothing off if necessary. Measure blood pressure again in complete peace and quiet.

Every measurement results in different values, although the device functions normally and normal values are displayed.

Refer to Section 3. About Blood

Pressure.

Blood pressure values differ from those measured at the doctor’s.

Refer to Section 3.7. Why Measure

Blood Pressure at Home?

NOTE: Blood pressure is subject to fluctuations even in healthy people. Please remember that comparable blood pressure measurements always require the same time and the same conditions!

These are normally quiet conditions. If you follow the procedure described earlier and still get fluctuations of blood pressure of greater than 15 mmHg and/or you repeatedly hear irregular pulse tones, consult your doctor.

19

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 7

8. ERROR MESSAGES/TROUBLESHOOTING

If an error occurs during a measurement, the measurement is discontinued and a corresponding error code is displayed

(Example: Err 2).

Error No.

ERR 1

Possible Cause(s)/Solutions

The systolic pressure was determined, but then the pressure in the cuff went down to less than 20 mmHg (diastolic blood pressure can’t be measured). The tube may have loosened after the systolic pressure has been determined. Further possible reason: pulse could not be detected.

ERR 2

ERR 3

ERR 5

HI

LO

Unnatural pressure impulses influence the measurement result. Reason: the arm was moved during the measurement.

The difference between systolic and diastolic is excessive.

Measure again carefully following proper procedures. Consult your doctor if you still get unusual results of measurements.

The measuring signals are inaccurate and no result can be displayed. Read through the checklist for performing reliable measurements and then repeat the measurement.

The pressure in the cuff is too high (over 300mmHg) or the pulse is too high (over 200 beats per minute). Relax for 5 minutes and repeat the measurement.

The pulse is too low (less than 40 beats per minute). Relax for

5 minutes and repeat the measurement.

18

3. ABOUT BLOOD PRESSURE

3.1. What Is Blood Pressure?

Simply put, arterial blood pressure is the force of blood exerted against the

walls of the arteries. There are two components to blood pressure: systolic

and diastolic pressure. Systolic, the higher pressure, occurs during contraction

of the heart. Diastolic, the lower pressure, occurs when the heart is at "rest."

Your level of blood pressure is determined in the circulatory center of the

brain and adjusts to a variety of situations through feedback from the

nervous system. To adjust blood pressure, the strength and frequency of

the heart (pulse), as well as the width of circulatory blood vessels, are

altered. Blood vessel width is affected by fine muscles in the blood vessel

walls. Blood pressure is traditionally measured in millimeters of mercury

(mmHg).

It is recorded as systolic/diastolic. For example a systolic of 120 and

diastolic of 80 would be recorded 120/80.

Blood pressure is a dynamic vital sign, one that changes constantly

throughout the day. A person's "resting" blood pressure is the

pressure that exists first thing in the morning while a person is still

at rest and before consumption of food or drink.

3.2. What Is a Normal Blood Pressure?

A systolic pressure of less than 120mmHg and a diastolic pressure

of under 80mmHg are recognized as normal by the Joint National

Committee on Prevention, Detection, Evaluation, and Treatment of

High Blood Pressure, 2003.

NOTE: Blood pressure does increase with age, so you must check

with your doctor to find out what is “normal” for you! Even with

normal blood pressure values, a regular self-check with your blood

pressure monitor is recommended. You can detect possible changes

in your values early and react appropriately. If you are undergoing

medical treatment to control your blood pressure, keep a record of

values along with time of day and date. Show these values to your

7

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 8

doctor. Never use the results of your measurements to

independently alter the drug doses prescribed by your doctor.

3.3. What Influences Blood Pressure?

Blood pressure is influenced by many factors including age, weight,

physical conditioning, past illness, time of day, altitude, activity,

and climate, to name just a few. In general, blood pressure is lower

in the morning and increases throughout the day. It is lower in

warm weather, and higher in cold weather.

Physical activity can have a significant short-term impact on blood

pressure. Work, exercise, smoking, eating, drinking - even talking,

laughing, or crying - will all affect a person's blood pressure.

Your diet, including beverages containing caffeine or alcohol, may

affect blood pressure. Emotional stress can have a dramatic impact

on your blood pressure.

Even repeated blood pressure measurements taken without

adequate rest between readings will alter your blood pressure as

the vessels in your arm engorge with blood. Many of these

influences are only temporary or short term, though chronic (long

term) exposure to some factors may result in permanently elevated

blood pressure levels.

8

3.4. Does Blood Pressure Vary?

Constantly. An individual's blood pressure varies greatly on a daily and

seasonal basis. It changes throughout one's lifetime. It is not uncommon

for systolic pressure to

vary by 40mmHg or more

throughout the course of

a single day! While

generally not as volatile,

diastolic pressure can

still vary significantly. In

hypertensive individuals,

variations are even more

6.6. Irregular Heartbeat Detector

This function indicates an irregular heart beat. If the symbol of

IHD appears on the display that means that certain abnormalities

in the heartbeat frequency were detected during the measurement. In

this case, the result may deviate from your normal blood pressure –

repeat the measurement. In most cases, this is no cause for concern.

However, if the symbol appears on a regular basis (e.g., several

times a week with measurements taken daily) we advise you to tell

your doctor. Please show your doctor the following explanation:

Information for the doctor on frequent appearance of the

Irregular Heartbeat Detector

This instrument is an oscillometric blood pressure monitor that also

analyzes pulse frequency during measurement. The instrument is clinically

tested. The symbol is displayed after the measurement if pulse

irregularities occur during measurement. If the symbol appears more

frequently (e.g., several times per week on measurements performed

daily) we recommend the patient seek medical advice. The instrument

does not replace a cardiac examination, but serves to detect pulse

irregularities at an early stage.

7. MEMORY FUNCTION

This semi-automatic blood pressure monitor

automatically stores the last result measured.

When the unit is off, press and hold the « ON/OFF »

button and the last measurement will be displayed.

17

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 9

6.3. Reading Measurement Results:

When the measurement has been concluded, a

long beep tone sounds. The measured systolic

and diastolic blood pressure values, as well as

the pulse, are now displayed. A downward

triangle will flash, indicating the rest of air

pressure in the cuff can be released.

Systolic blood pressure

Diastolic

Blood

Pressure

Pulse

The cuff pressure can now be quickly released by pressing the quick

release valve on the bulb.

Note: To prolong the batteries’ life the device switches

off automatically if no button is pressed for 1 minute

30 seconds (+/- 10 sec). Otherwise you can switch it off

by pressing the « ON/OFF » button.

6.4. Inflating Further:

If the cuff is not inflated sufficiently, the measurement is stopped

after a few seconds and a flashing arrow pointing upwards

▲ appears in the display. It is then necessary to inflate at least 20

mmHg higher than the previous value until cuff pressure displays

again on the LCD. The instruction to inflate further can appear

several times if the pressure is still not sufficient.

Attention!

If the cuff is inflated too far (over 300 mmHg), HI appears

in the display and a warning signal is sounded. The cuff

pressure must then be immediately released using the

quick-release valve on the inflation bulb!

6.5. Discontinuing Measurement

If it is necessary to interrupt a blood pressure

measurement for any reason (e.g., the patient

feels unwell), press and hold the quick-release

valve on the bulb at any time. The device then

immediately lowers the cuff pressure automatically.

16

pronounced. Normally, blood pressure is at its lowest during sleep and

rises in the morning and throughout the day. The chart (page 8) illustrates

the fluctuations that could occur in a typical day.

3.5. What Is Hypertension?

Hypertension (high blood pressure) is elevated systolic or diastolic levels. In

90 to 95 percent of the diagnosed cases, the specific causes are unknown,

although the condition is often linked with family history, and lifestyle. This

is referred to as essential hypertension. In the remaining cases, high blood

pressure is a symptom of an underlying, often treatable condition, which if

corrected, may normalize blood pressure. This less common type is known

as secondary hypertension. Hypertension, if left untreated, may contribute

to kidney disease, heart attack, stroke, or other debilitating illnesses. The

following standards for assessment of high blood pressure in adults have

been established by the Joint National Committee, 2003.

Range Systolic Diastolic Precaution

Classifications Blood Pressure Blood Pressure Measures

Normal <120 <80 Monitor regularly

Prehypertension 120 - 139 80 -89 Contact your physician

–– H Y P E R T E N S I O N ––

Stage 1 140 - 159 90 - 99 Contact your

(Moderate) physician Immediately

Stage 2 >160 >100 Contact your

(Severe) physician URGENTLY

(JNC-7 report: Joint National Committee on Prevention, Detection, Evaluation and Treatment of High Blood Pressure / 2003)

Remember, only a physician is qualified to interpret the readings

obtained from your blood pressure monitor. No attempt should ever

be made at self-diagnosis or treatment.

3.6. Can Hypertension Be Controlled?

Although essential hypertension cannot be cured, it can usually be

controlled by altering lifestyle (including diet), adopting a program of

exercise, stress management and, where necessary, with medication

under a doctor's supervision.

To help reduce the risk of hypertension, or keep it under control, the

American Heart Association (AHA) recommends the following:

9

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 10

•

•

•

•

•

Don't smoke

Reduce salt and fat intake

Maintain proper weight

Exercise regularly

Have regular physical checkups

3.7. Why Measure Blood Pressure at Home?

Clinical studies have shown improved detection and treatment of

hypertension when regular home blood pressure monitoring is done

in consultation with a physician.

Blood pressure measured in a doctor's office or hospital setting may

cause anxiety and lead to an elevated reading, a condition referred

to as "white coat hypertension."

Home measurements generally reduce the "outside" influences on

blood pressure readings, and can provide a more comprehensive and

meaningful blood pressure history.

Note: While it is important to keep an accurate record of your blood

pressure measurements, don't be overly concerned by the results of

any one measurement. Individual results may be influenced by

spiking of your pressure due to diet, anxiety, or mis-measurement

resulting from excessive arm movement, or misapplication of the

cuff. Many readings taken at the same time each day give a more

comprehensive blood pressure history.

Always be sure to note the date and time when recording blood

pressure and pulse measurements. For best results, and with time

permitting, three successive measurements may be taken daily.

Make sure to allow at least five minute intervals between

measurements. Discard any reading that appears suspect and record

the average of the remaining readings.

Comment: If it is not possible to fit the cuff to your left

arm, it can also be placed on your right arm. However,

all measurements should be made using the same arm.

Comparable blood pressure measurements always

require the same conditions.

6.2. Measurement Procedure:

After the cuff has been appropriately positioned and

connected to the monitor, the measurement can begin: a) Press the « ON/OFF » button to turn the device on.

You will see a flashing upward triangle

▲

. b) You will hear three short beeps, and a

steady “0” will be displayed. c) Grasp the bulb with your free hand and

inflate the cuff to a pressure at least

30 mmHg higher than the expected

systolic pressure, during which an

upward triangle will begin flashing. If you do not

know the value of this pressure, inflate to a value

between 160−180 mmHg. d) Stop pumping when the upward triangle stops

flashing. The device then starts to deflate. e) Lay down the bulb and remain in a quiet and

relaxed sitting position. The measurement now

proceeds on its own and is taken automatically.If no

measurement takes place and all that appears in

the display is a flashing, upwards pointing arrow,

pump the bulb again and inflate to a higher

pressure (see “Inflating Further” in section 6.4).

When the device detects a pulse, a heart symbol in

the display starts to flash and a beep is heard for

every heartbeat.

10 15

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 11

•

•

•

Use only clinically approved ADC cuffs.

If you want to follow the results of your blood pressure measurements, always perform measurements at the same time of day, since blood pressure changes during the course of the day.

Measurements should be done after five minute rest to ensure accuracy.

6.1. Fitting the Cuff

a) Position the cuff flat on the table with hook-

and -loop adhesive side down. Pass the end of

the cuff through the flat metal ring so that a

loop is formed. (Ignore this step if cuff is

already prepared.)

b) Place the cuff over the left upper arm so that

tube is closer to your lower arm.

Artery Mark

c) Lay the cuff on the arm so that the lower

edge of the cuff lies approximately 2 to 3 cm

above the elbow.

Important!

The small white (Artery Mark) on the cuff must lie

exactly over the artery which runs down the inner side of the arm.

d) Tighten the cuff by pulling the end and close the cuff by affixing

the hook-and-loop closure.

e) There should be a little free space between the arm and the cuff.

You should be able to fit two fingers between your arm and the cuff.

Clothing must not restrict the arm. Any piece of clothing which

does must be removed. Cuffs that don’t fit properly result in false

measurement values. Measure your arm circumference if you are

not sure of proper fit. Other size cuffs are available (Page 21).

f) Lay your arm on a table (palm upward) so the cuff is at the same

height as your heart. Make sure the tube is not kinked.

g) Remain seated quietly for at least two minutes before you begin

the measurement.

14

3.8. How Is Blood Pressure Measured?

Healthcare professionals traditionally use a device known as a

sphygmomanometer along with a stethoscope, essentially a

professional version of the very same instrument you have purchased.

The sphygmomanometer is a system consisting of an inflatable bladder

contained within a cuff, inflation bulb with air control valve, and

pressure measuring manometer (gauge). The gauge may be

mechanical, digital, or mercurial. The cuff is wrapped around the limb

and inflated to constrict blood flow to the artery. As pressure is

released from the cuff through the deflation valve, blood flow returns

to the artery producing pulse beats known as Korotkoff sounds, which

are detected with the stethoscope. Systolic pressure is recorded at the

onset of these sounds. Diastolic pressure is generally recorded when

the sounds disappear (when blood flow to the artery returns to normal).

3.9. How Should I Record My Blood Pressure?

Record your blood pressure by setting up a simple chart in a spiral-

bound notebook as shown below, or use the included record book.

Date Time Reading Pulse

4/24 7:50AM 128/83 72

4/25 8:00AM 135/77 77

4/26 7:45AM 130/75 71

4/27 2:00PM 153/89 80

If you like you can add a column for comments about your condition

at the time of measurement, or a listing of any factors that may

have influenced your readings (such as "had a cold," or "just

returned from vacation").

For best results, and with time permitting, three successive

measurements may be taken daily. Make sure to allow at least five-

minute intervals between measurements. Discard any reading that

appears suspect and record the average of the remaining readings.

If this method is used, be sure to note that the readings are averaged.

11

93-6012N-00 rev 2.qxp_93-6012N-00 5/10/21 10:02 AM Page 12

4. COMPONENTS OF YOUR BLOOD PRESSURE MONITOR

The illustration shows your blood pressure monitor, consisting of:

Fits limb range: 8.7−12.6” (22−32 cm)

5. SETTING UP YOUR BLOOD PRESSURE MONITOR

5.1. Inserting the batteries

After you have unpacked your device,

insert the batteries. The battery

compartment is located on the back side

of the device (see illustration). a) Remove cover as illustrated. b) Insert the batteries (4 x AA, 1.5V),

observing the indicated polarity. c) Reinstall battery cover.

12

Attention!

• If a battery warning appears in the display, the batteries are almost discharged and must be replaced.

•

•

After battery warning appears, the device will not work until the batteries have been replaced.

If the blood pressure monitor is not used for long periods, remove the batteries from the device.

•

•

Use “AA” Long-Life or Alkaline 1.5V batteries. Do not use rechargeable batteries.

Functional check: Press and hold the « ON/OFF » button down to test all the display elements. When functioning correctly many icons will appear.

5.2. Cuff Connection

Insert the cuff connector into

the opening provided on the

side of the device as shown in

the picture.

6. MEASUREMENT PROCEDURE

Attention!

• Find time to relax by sitting in a quiet atmosphere for some time before measurement.

• Efforts by the patient to support the arm can increase the blood pressure. Make sure you are in a comfortable, relaxed position and do not activate any muscles in the arm during measurement.

•

•

Always measure on the same arm (normally left).

Remove any garment that fits closely to your upper arm. Do not roll

the sleeve since it can squeeze your arm and this can lead to false

results.

13