AUDAX BioAx User Manual
Add to my manuals
26 Pages
AUDAX BioAx is a feature-packed, versatile body camera that offers professional-grade performance for law enforcement, security personnel, and outdoor enthusiasts. With its impressive 140-degree field of view, it captures a wide perspective, ensuring you don't miss crucial details. The device boasts a range of video resolutions, allowing you to choose the optimal quality for your needs, and its pre-recording and post-recording functions provide added flexibility.
advertisement
USER MANUAL
OVERVIEW
Clipslot \Q)
LCD
Up/Left button.
_ ......,._._ __
Menu
/ Confrm button
�--+fflfDown/Right button
Back
/ Video replay button
Working lndicator(Red)
/Standby lndicator(Green)
Internet connecting(White)
/Charging indicator(Blue)
-c: =--+-+1 -F� ���=;i���� g
USB
/Headphone port
Tagging
/SOS button
PARAMETER
�gth/button
Size
We ight
Button
84. 5 mm*56.3mm*27.3mm
140g(0.31 lb}
- Front big Record button and top Record button easy operation
- Yellow PTT button
- Yellow SOS button
Chipse ts
Sensor
Ambare lla H22
OS05 A20
- 3 color LED indicator for camera status
- 3 color LED indicator for battery level
- Programmable buzzer
-Vibration
Flash L ight
IR upto to 10 me ters at 0 lux with visible shape image
90 degrees view angle light source for low light condition can enable/disable by button press
Optional(position the object to record,enable/disable by button)
IP Rating:IP67
HOV 140 degrees
Video Resolution consumption)/ 1 0B0P60 / 720P30 / 720P60 / 480P30
Video Streaming Resolution
Audio Streaming:Support
Streaming Bitrate:300kbs-4M kbs
720P30 / 480P30 / 320P30
Text Streaming:Support
Snap Shot:During recording
Video Format:MP4
EIS
Picture format:JPE G
6 axis image stabilizer(Optional)
SOS
Audio Format:AAC
Audio alarm activates in all cameras at same group and audio alarm in command eerier
External Camera Support
Night Vision
Storage
Ultral low light performance & IR LED
Optional 32GB,64GB, 128GB,256GB
US B Port
Pogo Pin connection
Support external camera connection
Support dock & go operation
. .
Wi-Fi
..
..
2.4G, AP/STA/P2P,Wi-Fi channel can be set by cam manager
/
I R: 10 meters (2 IR LED)
/
Clustered
Talkback(PTT)
Alarm
Text message
/
/
I
GPS/NFC:Optional
Optional (camera talk to camera.camera talk to command canter, command talk to cameras);can set cameras to groups from camera GUI or from command center software
SOS button to activate warning signal in camera and in command canter and advise command canter the position of camera
Camera can send text message to camera or command canter l:.i1hlhhhll
TCP/IP, RTSP, RTMP, GB/28181/JSON l;fe.lWli'l'
Recording Time
- GPS and WiFi on at 480P30 12 hours and 30 minutes
Standby Time:100+ hours
Streaming&Recording time
I:. r:..r; , ,,....,. ·
Pre-recording
- 1080P Up to 14 Hours;480P Up to 16 Hours
........
I
7.5 hours
I
Charging Time:4 hours
30 seconds to 60 seconds varies from resolution settings
Post-recording 30 seconds to 60 seconds from resolution settings
Motion Detect Support e t1U1""•��1l
AES256 encryption RTSP Video/audioffext streaming data
Network Security Https&Http Server
■L--.: .... , ; I
....
'
- all camera settings available under mass storage mode
- all camera settings available under USB simple mode
- USB heart beat available
- Control over LED/buzzer available under mass storage mode
- Ambarella driver free even while USB encryption activated
- Support driver free connection to computer l,'J 111111-.; 111111 1111
Standard mount 360 degrees rotatable crocodile mount
Optional mount MOLLE compatilbe mount
...... ......
.,,
. l!.I
Content supported
I
I
CLICKFAST Stud
User ID/Device ID/Date/Time/Geo-tags/Logo
BUTTON
:
Power
Button
REC
Button on Top
REC
Button on Front
Audio
Button
Photo
Button lnfrared
Button
PTT Button
SOS Button
Playbac k
Button
� ml
GD
If •1,0.:H tlol
Press Press to turn on/off LCD
Hold to turn on/off camera
Press Start/Stop video recording
Hold for 3 Start video recording when camera is off. seconds In preview mode, hold to switch video resolution.
Press mn
Press
Hold for 3 seconds
Start/Stop video recording l!i)
Start video recording when camera is off e
Press Start/Stop aud io recording
Take photo
Turn on/off the red & blue warning light m
Press
Hold for 3 seconds
Holding for
Press
Turn on/off infra red LED
Turn on/off wh ite LED flashl ight
Push to talk
Turn on SOS function
Press Exit to previous interface
Menu
Scroll Up
/Down
Buttons
Reset a a Press
Press
Menu; Confirm
Scroll up or left/Scroll down or right ml GD
Hold for 3 seconds
Hold for 3
Zoom in/Zoom out
Reset the camera when holding power seconds button & the video record button on the top
I'
FUNCTIONALITIES
1. Power On/Off
Power on: When camera is off, hold turn on indication as below: ml to turn on the camera. The
• Camera status Indicator turn green
• Camera LCD will show boot up logo
• Boot up music
• Camera vibrate
Power off: When camera is on, hold turn off indication as below: ml to turn off the camera. The
• Camera LCD will show turn-off logo, LCD goes black
• Camera status Indicator will turn off
• Turn-off music
• Camera vibrate
■+-
FUNCTIONALITIES
Notice: If camera is in recording mode, the video will be stored properly then camera turn off.
Turn on/off LCD: When camera is on, press backlight of LCD screen. ml to turn on / off the
2. Video Recording
When camera is in standby mode: If camera is in standby mode
(power on but not recording), press again to stop recording.
GD to start recording, press
GD
When camera is off: Hold automatically, press
GD
GD , camera will turn on and start recording again to stop recording.
3. Video Setting
In preview mode, press , input the right password to enter setting menu, select the first icon (Camera Setting icon) and press to go to setting list. m m again
Default password: For general user default password is 000000 , user can only check settings, but can not change settings.
For administrator default password is 888888, user are able to change settings. To change password, please use Cam Manager.
1) Resolution
There are six options to select from:
25GOX144O 3OP / 192OX1O8O GOP/ 192OX1O8O 3OP / 128OX72O GOP/
128OX72O 3OP / 848X48O 3OP
FUNCTIONALITIES
(2) Quality
There are three options to select from: S. Fine / Fine / Normal
(3) Photo Size
There are six options to select from: 4M /SM/ 12M / 16M / 30M / 40M
(4) Selfie
There are four options to select from: Off/ 3 sec/ 5 sec/ 10 sec
Press�, camera will take a photo after the selected time period.
(5) Timelapse
There are six options to select from:
Off / ½ sec I 1 sec I 3 sec I 5 sec I 10 sec
Press � , camera will keep taking photos until you press � again.
Photos will be taken intermittently with the selected time period.
(6) Burst Mode
There are eight options to select from:
Off/ 2 pcs / 3 pcs / 5 pcs / 10 pcs / 15 pcs / 20 pcs / 30 pcs
Press�, the selected quantity of photos will be captured continuously.
(7) Streaming Resolution
There are three options to select from:
1280X720 30P / 848X480 30P / 432x240 30P
FUNCTIONALITIES
(S)Streaming Frame Rate
There are six options to select from: 5FPS / 10FPS / 15FPS / 20FPS /
25FPS / 30FPS
(9) Streaming Bit-rate
There are seven options to select from: 300kbps / 500kbps /
1000kbps 12000kbps 13000kbps 14000kbps 15000kbps
(10) Streaming Control
There are six options to select from: Off/ Video/ Audio/ Text/
Audio and Video / All
Notice: Select off to turn off all streaming.
(11) H265 Encoding
There are two options to select from: Off/ On
(12) Pre Record
There are eight options to select from:
Off/ 5 sec/ 10 sec/ 15 sec/ 20 sec/ 30 sec/ 60 sec/ 2min
Camera will record 5sec-2min of video prior to record button being pressed to start recording.
(13) Loop Record
There are two options to select from: On I Off
FUNCTIONALITIES
When loop recording is set "On", it provides a way to let camera keep recording when memory space is full, because the oldest file will be overwritten by the latest file.
(14) Post Record
There are six options to select from:
Off / 5 sec / 10 sec / 20 sec / 30 sec / 60 sec/120 sec
Camera will record 5-120sec after record button being pressed to stop recording.
(15) One Touch Recording
There are two options to select from: On / Off
One Touch Recording set On, camera will start recording right away once powered on.
(16) Video Length
There are five options to select from: 2 min / 5 min / 10 min / 15 mini
Off
Notice: Set to Off, video will be split into 30 minutes video interval.
(17) Mute Recording
There are three options to select from: Off/ Only Pre-record/ On
Audio won't be recorded when mute recording is on; If Only Pre record chosen, then only the pre-recorded video will be muted.
I•
FUNCTIONALITIES
(18) Record Notification
There are six options to select from: On/ 5 sec/ 10 sec/ 15 sec/ 30 sec/ 60 sec
Recording Notification will give audio beeping at the specified interval as long as the camera is recording. This will not affect the notifications at the start and end of recordings.
(19) Motion Detect
There are two options to select from: On/ Off on, press
CiJ to initiate motion detect, once camera detects the movements, it will start recording, and stop recording until video scene has not changed or moved for over 10 seconds.
4. Photographing
In Preview Mode, single-press �, and the unit will start taking photo similar to a digital camera.
5. Screenshot
To capture picture while video is being recorded, just single- press�
6. Audio Recording
Press
B
B, and the camera will start audio recording. again to stop audio recording.
FUNCTIONALITIES
One key audio recording: When camera is off, hold
D for 3 seconds, camera will turn on and start audio recording right away. Press
D again to stop audio recording.
7. File Tagging
While video is being recorded, press a , there will be a� icon
Press
GD to stop recording, video will be saved as important video.
(1) When camera is video recording, press
D to stop video recording and start audio recording. The video will be stored properly then switch to audio recording.
(2) When camera is audio recording, press
GD to stop audio recording and start video recording. The audio will be stored properly then switch to video recording.
FUNCTIONALITIES
9. Playback
In Preview Mode, press, and find "Video, Photo, Audio", all files recorded can be browsed.
10. One Key Playback
In Preview Mode, press and hold to check the last file recorded.
11. Data Upload
In preview mode, press m
, input the right password to enter setting menu, select the "Data Upload" icon and pressmagain to go to video upload interface.
Default password: For general user default password is 000000 , user can only check settings, but can not change settings.
For administrator default password is 888888 , user are able to change settings. To change password, please use Cam Manager.
Local
In "Local" setting interface, all the video, audio, photo files are showing, and user can select the needed file to playback or upload.
12. General Settin
In preview mode, press menu, select the "General" icon and press list.
W, m again to go to setting
MfW
FUNCTIONALITIES
Default password: For general user default password is 000000 , user can only check settings, but can not change settings.
For administrator default password is 888888 , user are able to change settings. To change password, please use Cam Manager.
(1) Language Setting
There are three options to select from: English, 1'11Jf;$cl=IX (Simple
Chinese), Ting vit nam (Vietnamese)
(2) TV OUT
There are two options to select from: NTSC / PAL
(3) GPS
There are two options to select from: On/ Off
(4) Vibration
There are two options to select from: On/ Off
(5) IR Filter
In dark circumstances, infrared LED will help record better quality video.
There are four options to select from: Off/ Manual/ Auto / Recording
Auto
Off: lnfrared LED disabled.
Manual: Press off infrared LED. m
, to turn on infrared LED, Press m again to turn
Auto: lnfrared LED will be turned on/ off automatically according to the environment light condition. When environment light condition is dark, infrared LED will be turned on automatically; When environment light condition is bright, infrared LED will be turned off automatically.
FUNCTIONALITIES
Recording Auto: Only during video recording, infrared LED will be turned on/ off automatically according to the environment light condition.
(6) Auto Power Off
There are seven options to select from:
Off/ 30 sec/ 1 min / 3 min / 5 min / 10 min / 30 min
Auto Power Off will only power off the device when it has been in standby mode for the selected interval. This will NOT power off the device during recordings.
(7) LCD Auto Off
There are six options to select from:
Off/ 10 sec/ 30 sec/ 1 min / 3 min / 5 min
LCD Auto Off will turn off LCD display for the selected interval. This will NOT power off the device.
(8) Key Tone
There are two options to select from: On/ Off
On: Camera will beep when buttons are pressed.
Off: Camera will not beep when buttons are pressed.
(9) Voice Volume
There are eleven options to select from:
0/1/2/3/4/5/6/7/8/9/10
(10) Voice Remind
There are three options to select from: Off/ Beep/ Speech
MCI
FUNCTIONALITIES
(11) Clock Beep
There are two options to select from: On I Off
On: Once time is full clock, camera will beep.
Off: Once time is full clock, camera will not beep.
(12) LED Light
There are two options to select from: On
On: LED indicator will be on.
Off: LED indicator will be disabled.
I Off
(13) CarDV Mode
There are two options to select from: On I Off
CarDV Mode means camera will power on automatically and start recording after connected to power source such as car charger.
(14) File Tagging
There are six options to select from:
Normal I Traffic I DWI / Confidential / Criminal / Other
(15) Stealth Mode
There are two options to select from: On I Off
On: Turn off all LED indicators, IR LED and all prompt sound.
Off: All LED indicators, IR LED and all prompt sound will be normal settings.
(16) Enhanced Standby
There are two options to select from: On I Off
(17) Password Mode
There are two options to select from: On I Off
FUNCTIONALITIES
On: A password is required, when user want to go to Menu mode.
Default password: For general user default password is 000000 , user can only check settings, but can not change settings.
For administrator default password is 888888 , user are able to change settings. To change password, please use Cam Manager.
Off: No password is required to go to Menu mode.
(18) wifi
There are three options to select from: WIFI / Power-up Start I Mode a. WIFI: On/ Off
On: WIFI enabled.
Off: WIFI disabled. b. Power-up Start: Off/ Auto I Manual
Off: WIFI will not turn on automatically once camera is powered on.
Auto: WIFI will be turned on automatically once camera is powered on.
Manual: WIFI needs to be turned on/off manually.
c.
Mode:AP / Station / Direct
(19) Change De vice ID
Set the De vice ID you would like to have.
(2 0) Change User ID
Set the User ID you would like to have.
-,w
FUNCTIONALITIES
13. About Device
In preview mode, icon and press m pressmto enter into setup menu, select the "About" again to go to setting list.
It includes information as below: Location System Info, Total Space,
Available Space, Remaining Video, Remaining Audio, Remaining Photos,
Battery Status, Temperature, Server IP, Server Port, Account, module,
IMEI, APN, IP, Signal, WLAN MAC, WLAN SSID, WLAN IP, Serial Number,
Hardware Version and Firmware Version .
FUNCTIONALITIES
14. Other Button Functions
1.PPT Button: When is turned on, hold
CiiJ to achieve the PTT function. Either real time PTT audio communication between platform headquarter and camera, or cluster PTT communication between camera & camera.
2.SOS Button: When is turned on, hold
B to send an alarm
(includes alarm & GPS information) to the platform headquarter or theAPP.
15. Reset
Resetting camera will power off the camera forcibly, it helps when the camera is down.
Hold
E!J
(Record button on the top) and tgJ together for 3 to 5 seconds, camera will reset.
@1:@
FUNCTIONALITIES
16. Charging
Please charge camera via USB cable and wall charger provided. The battery used in camera is Polymer Lithium type. When camera is fully charged, blue charging indicator will turn off.
There are 2 ways of charging:
1. Connect camera to computer via USB cable
Since the current of different computer's USB port varies from each other, it is normal if there are circumstances that camera can not be fully charged.
2. Charging by adapter & USB cable
When camera can work normally, while being charged by adapter +
USB cable.
FUNCTIONALITIES
17. Headset
Please use the headset(optional accessory) provided. Camera will automatically go to headset mode, once headset is plugged in the headset hole. Hold the control button on the headset, camera will start
PTT communication. Once headset is plugged out, camera will be back to normal mode.
18. External Camera
Once the external camera is connected to camera via USB port, camera LCD will show the image from external camera. External camera unplugged, the image in camera LCD will be switched to image captured by main camera.
Charging
■PI
Data
Transferrin Data Transferring
Optional Dock
CAM MANAGER
Installing the Camera Management Software allows for viewing and downloading saved photos and videos, changing device settings, and syncing date and time.
1. Software Requirements
Windows 7,8, or 10 operation system
Hard drive storage for archiving video (1TB recommended)
2. Cam Manager Login
1. Open the " Cam Manager " software on your computer. Connect camera to computer via USB cable. Your camera will power on and get connected to computer.
2. There are 2 user types:
(1) General User: This mode allows for viewing and downloading media files only. The default password is: 000000
(2) Administrator: This mode allows for changing device settings as well as viewing and downloading media files. The default password is:
888888
CAM MANAGER
3. Camera Info
After login, the Camera Management Software will open on the
Camera Info tab. camera I n f o
"""'�'°
Networ1t Se tm o s
ModoNo ,
Cimera Se tt i uJ s Other Se tt r, gs Encrypt» n P a5S w o r d
�-•CJ
e.-cod e : �7006C6FE
"' ' ' ""' ' §:" =7 u �ro , [moo ---=i
Bamry�ft:: [89% C 1.15IOOIIZ1!d
W a ter Mri :
L
U s e r T y pe: Gen e r a l U s e r
P a ss w o r d :
�----�
Log i n Ca n c e l
"'""'"""''
S,nc?CDatrfflfMc
F onna t OS: camttaOff
Reconnect Ext
Under "Device Info", There are device model Number and bar code;
(1) Under "Other"
There are settings of: Device ID, User ID, Firmware version, Battery
Left level, free space and Watermark. Making changes by enter new settings into the white textbox, click "Apply" to save the settings.
CAM MANAGER
(2) Click "Refresh" button to refresh the battery status;
(3) Click "Sync PC Date Time" to sync the camera's date & time to the computer's.
(4) Click "Open File Explorer" to get access to camera SD card mass storage. User are able to check, copy or delete files.
(5) Click " Format Disk" to Format the Camera's Memory Disk, the files will be DELETED immediately, and the disk's space will be released.
4. Network Settings
(1) Under "Server Config", user can change Device Name, Protocol,
Server URL, Server IP, Server Port, Account and password.
Making changes by enter new settings into the white textbox, click
"Apply" to confirm the setting.
(2) WIFI
A. Click "Link Mode" drop-down list (under "Universal Setting")
There are three options to select from: Off I Auto/ Manual
Off: WIFI will not turn on automatically once camera power on.
Auto: WIFI will be turned on automatically once camera is powered on.
Manual: WIFI needs to be turned on/off manually.
B. Mode: AP / Station / Direct
AP: User can check the video streaming using WIFI APP.
Station: Camera can get connected to WIFI hotspot and make live video streaming through special software.
Direct: Camera make video streaming and short distance video transfer by using WIFI direct function on smart phone.
CAM MANAGER
camera Info r � e tw ork Setmgs camera Se tm gs Oth e r Se tm os Encrvt>tion P a sswo r d
� er LRI.
:
Arou1t:
�=====:
J
W IF I lhverwl S e tllrl!l
I.ft�: ALJto
Mode: STA
Protocol:
Server IP :
P asswor d :
Cloo<flMS l2!....:_ 1 M .
57
L
V
.
ia ]
Sever ,i,r e a : 0.,.,
� er?
or t: 1§...
J
R d , e sti
"""
J
Chrnel : 2 , 1G
SSID: ] llod)Cll'II_DMT22 P asswor d : 1 12345678 Refrest, �
STA Se lt n 9
Auto Get I P : On SSID: [§t t.e
r � j
Password� � te
__I
,.,
PINCode :
..,,....., lslkModc:
Piw Mac
L.dMode:
APNUSerName
�
Off
5678
=7
...,
: ----�]
Ad!t
ess : �i'DD6C6ff ]
Refresti
Refre41
Paw Name :
L
�
Apply
111!:llll Ra te:
�
�
Off
---
:
L
�
"' SIMPIN: j APNP ass W c.
d : L
�
'-;:::=== =-,
Refresti
Am ,
Refre
L_ __ __J sh
.a.i:dv
�
]
R econ n l!C
t Exit
C. In AP Setting, user can change WIFI SSID & WIFI Password by inputting new WIFI SSID in the "SSID" textbox and new password in the "Password" textbox, click "Apply" to save the settings.
D. In STA Setting, user can change WIFI SSID & WIFI Password by inputting new WIFI SSID in the "SSID" textbox and new password in the "Password" textbox, click "Apply" to save the settings.
WJI
CAM MANAGER
E. In Direct mode, user can check the WIFI Password. To change password, just input new password in the "Pin Code" textbox, click
"Apply" to save the settings.
CAM MANAGER
5. Camera Settings
Click the "Camera Settings" tab in the Camera Management Software.
From here you can change device settings. Select the setting you wish to change, and a drop down will appear with all available options.
Select the setting you want. Click "Apply" to update settings with the new chosen options.
Main Resolution
Click the "Main Resolution" drop down. There are six settings to choose from: 25GOx1440 30P / 1920x 1080 GOP/ 1920x 1080 30P /
1280x720 GOP/ 1280x720 30P / 848x480 30P
Click the setting you prefer and click "Apply" to save.
Image Quality
Click the "Image Quality" drop down. There are three settings to choose from: High / Medium / Low
Click the setting you prefer and click "Apply" to save.
Note: Image Quality refers to the quality of videos. camera Info Networ1c Settrlgs Cuner.11 Settrigs other S e ttrl gs
MM'IResolilion :
S tre amric;iResolition : l 9 2C• 1 080(P30 )
432'"210
E n ciyp tio n lmageQuallty:H!tl
SIJ C lll"llngl'J.!in'!t
Ratt: :
S tte a,rw,g Controi :
R eairdng Pr� :
PM t Rttord :
Ph:)tDSi ze :
PhotoQJall t}' :
Flxst Mode :
JCR>S
A.V
Off
Off
+I
�
Off
Interv� Photograph: Off
'l' OUTle : 10
P a sswo
StreanrigBittate: IOOCIKbs i"\Jtt:Rttolding: Off
VideoSpl,tter:5rr«'I
PreRccord : Off wo!,bs«wr: HttDS r d
��Modi!
: Off
TVOJt: NTSC
Tvn e ZOnt : UfCi-0 .
0 hJtoIR :
IRSematrrit')' :
Marual
5
EncodnoForat11t: H264
� T aogng : tbmal
AutoPo\lie'Off: Off
Da tt: FOffllat: rrtY,""1-00
�ElS :
Kt
�lon,;iS y T
GPS one tard> y
LBJlooc.llDr
:
:
:
: stealth Mode: :
□
□
On
52)on
0n
52)on
Don
Powes an AutG-Record
AIJtD T rner -Sync : l � R KOrting :
: 00n
Da:11 C«nO"a Mode :
O on
□
Bectnr:: W arflng : 0 on
AudloPrarrot: Beep
Screen Save: OFF
Ootbd
OlairgeState: FastState
Cli ft«ord : On
Ood: Prompt :
:
0 0n
Eaon
MobonDctedlon :
Mem0rt W amog :
Q 0n
!;2jon
Re con n ect
Streaming Resolution
Click the "Streaming Resolution" drop down. There are three settings to choose from:
1280 X 720 / 848 X 480 / 432 X 240
Click the setting you prefer and click "Apply" to save.
WlW
CAM MANAGER
Streaming Bitrate
Click the "Streaming Bitrate" drop down. There are seven settings to choose from: 5000Kbs / 4000Kbs / 3000Kbs / 2000Kbs / 1000Kbs /
500Kbs / 300Kbs
Click the setting you prefer and click "Apply" to save.
Streaming Frame Rate
Click the "Streaming Frame Rate" drop down. There are six settings to choose from: 5 FPS/ 10 FPS/ 15 FPS/ 20 FPS/ 25 FPS/ 30 FPS
Click the setting you prefer and click "Apply" to save.
Mute Recording
Click the "Mute Recording" drop down. There are three settings to choose from: Off/ On / Pre-recorded
Click the setting you prefer and click "Apply" to save.
Streaming Control
Click the "Streaming Control" drop down, There are six settings to choose from: OFF / Audio / Video /AV/ Text/ ALL
Click the setting you prefer and click "Apply" to save.
Video Splitter
Click the" Video Splitter" drop down. There are five settings to choose from: Off(Videos will be in segment of 30 minutes)/ 2 min / 5 min
/10min/15min
Click the setting you prefer and click "Apply" to save.
Note: Video splitter refers to the length of video segments while the device is recording. The minute amount is the length of each video segment before the device begins a new video file. This will NOT stop the device from recording, it will just split your videos into smaller, more manageable files.
CAM MANAGER
Recording Notification
Click the "Recording Notification" drop down. There are six settings to choose from: Off/ 5 sec/ 10 sec/ 15 sec/ 30 sec/ 60 sec
Click the setting you prefer and click "Apply" to save.
Note: Recording Notification will give audio chirps at the specified interval as long as the camera is recording. This will not affect the notifications at the start and end of recordings.
Pre Record
Click the "Pre Record" drop down. When checked with a second amount, the camera will record 5-120 seconds of video prior to Video
Recording button being pressed.
There are eight setting to choose from: Off/ 5 sec / 10 sec/ 15 sec /
20 sec/ 30 sec/ 60 sec/ 120 sec
Click the setting you prefer and click "Apply" to save.
Post Record
Click the "Post Record" drop down. There are six settings to choose from: Off/ 5 sec/ 10 sec/ 20 sec/ 30 sec/ 60 sec
Click the setting you prefer and click "Apply" to save.
Note: The camera will record extra set length of video after Video
Recording button being pressed.
Web Server
Click the "Web Server" drop down. There are four settings to choose from: Off/ Http/ Https / Http & Https
Click the setting you prefer and click "Apply" to save.
Note: Files recorded can be browsed via web server when WiFi is turned on.
WJ:M
CAM MANAGER
Photo Size
Click the "Photo Size" drop down. There are six settings to choose from: 40M / 30M / 16M / 12M /SM/ 4M
Click the setting you prefer and click "Apply" to save.
Timelapse
Click the "Timelapse" drop down. There are six settings to choose from: Off/ 0.5 sec/ 1 sec/ 3 sec/ 5 sec/ 10 sec
Click the setting you prefer and click "Apply" to save.
Photo Quality
Click the "Photo Quality" drop down. There are three settings to choose from: High / Medium / Low
Click the setting you prefer and click "Apply" to save.
Volume
Click the "Volume" drop down. Select the volume number you prefer and click "Apply" to save. 1 is the lowest speaker volume, and 10 is the largest.
Burst Mode
Click the "Burst Mode" drop down. There are eight settings to choose from: Off/ 2 pictures / 3 pictures / 5 pictures / 10 pictures
/ 15 pictures/ 20 pictures/ 30 pictures
Burst Mode means camera captures a continuous sequence of pictures.
Click the setting you prefer and click "Apply" to save.
CAM MANAGER
Display Brightness
Click the "Display Brightness" drop down.
Click the setting you prefer and click "Apply" to save.
Selfie Mode:
Click the "Selfie" drop down. There are four settings to choose from:
Off I 3 sec I 5 sec / 10 sec
Click the setting you prefer and click "Apply" to save.
File Tagging
Click the "File Tagging" drop down. Click the setting you prefer and click "Apply" to save.
TV Out
Click the "Video Standard" drop down. There are two settings to choose from: NTSC / PAL
Click the setting you prefer and click "Apply" to save.
Auto Power Off
Click the " Auto Power Off" drop down. There are seven settings to choose from: Off/ 30 sec/ 1 min / 3 min / 5 min / 10 min / 30 min
Click the setting you prefer and click "Apply"to save.
Time Zone
Click the "Time Zone" drop down to select the correct time zone, and then GPS will change the date and time accordingly.
CAM MANAGER
Date Format
Click the "Date Format" drop down. There are three settings to choose from: YYYY-MM-DD / DD-MM-YYYY / MM-DD-YYYY
Click the setting you prefer and click "Apply" to save.
Auto IR
Click the "Auto IR" drop down. There are four settings to choose from:
Off/ Manual / During Recording / Auto
Click the setting you prefer and click "Apply" to save.
Audio Prompt
Click the "Audio Prompt" drop down. There are four settings to choose from: Off/ Beep / Speech
Click the setting you prefer and click "Apply" to save.
IR Sensitivity
Click the "IR Sensitivity" drop down. Click the setting you prefer and click "Apply" to save.
LCD Auto Off
Click the "LCD Auto Off " drop down. There are six settings to choose from: Off/ 10 sec/ 30 sec/ 1 min / 3 min / 5 min
Click the setting you prefer and click "Apply" to save.
Encoding Format
Click the "Encoding Format " drop down. There are two settings to choose from: H.265 I H.264
Click the setting you prefer and click "Apply" to save.
CAM MANAGER
Charge State:
Click the "Encoding Format" drop down. There are two settings to choose from:
Off: Camera can not be charged while camera is on.
Normal State: Regular charging mode while camera is on.Fast
State: Fast Charging mode while camera is on.
Click the setting you prefer and click "Apply" to save.
Video EIS
Click the "Video EIS" drop down. There are two settings to choose from: Off/ On
Click the setting you prefer and click "Apply" to save.
Double Click Record
Click the "Video EIS" drop down. There are two settings to choose from: Off/ On
Click the setting you prefer and click "Apply" to save.
GPS
Click the "GPS" box to turn GPS on or off. When checked, GPS will be turned on. Please make sure GPS module is included in the camera.
Turn on camera, when GPS signal is received, GPS icon will turn green � , and then GPS coordinates will be created as watermark of video.
WfW
CAM MANAGER
Power-on Auto Record
Click the "Power-on Auto Record" box to get camera to starting recording automatically after powered on.
Clock Prompt
Click the "Key Tone" box to turn on/off clock beep prompt.
Key Tone
Click the "Key Tone" box to turn on/off vibration of camera. When checked, camera will beep when buttons are pressed.
Auto Update Time
Click the "Vibration" box to turn on/off auto update time function.
On: Once GPS signal is received, the camera date & time will be synchronized to GPS time.
Off: Once camera is connected to Cam Manager, the camera date & time won't be synchronized to PC's.
Vibration Prompt
Click the "Vibration Prompt" box to turn on/off vibration of camera.
Enhanced Standby
Click the "Enhanced Standby" box to turn on enhanced Standby, uncheck to turn off.
Dash Camera Mode
Click the "Dash Camera Mode" box to have the camera automatically power on and start recording when connected to power supply such as a car charger.
WEN
CAM MANAGER
Motion Detection
Click the "Motion Detection" box to turn on motion detection, uncheck to turn off.
Led Indicator
Click the "Led Indicator'' box to turn LED indicator lights on or off.
When checked, the camera will have LED indication when video is recording or photos are taken, and camera battery is low.
Loop Recording
Click the "Loop Recording" box to turn on loop recording function.
On: If memory becomes full, the oldest files will be overwritten by the latest file.
Off: Camera will stop recording when the memory is full.
Low Space Warning
Click the "Low Space Warning" box to turn on loop recording function.
On: Camera will make notification when the camera storage space is low.
Off: Camera won't make notification when the camera storage space is low.
Stealth Mode
Click the "Stealth Mode" box to turn on stealth mode, uncheck to turn off. In stealth mode, all the LED indicators, voice indication, key tone will be disabled.
Low Battery Warning
Click the "Low Battery Warning" box to turn on loop recording function.
On: Camera will make notification when the camera battery is low.
Off: Camera won't make notification when the camera battery is low.
CAM MANAGER
6. AES Encryption
Click the "AES256 Encryption" tab in camera management software.
CAM MANAGER
7. Change Password
Click the "Change Password" tab in the Camera Management
Software.
Cilllli!l'ii Info tl!!twork S @tttl l.f.i Cil m er il Setttiq� oth e r Settilgs Enaypb::m P il ssw o r d
OataEncryption: Off
AES�y:
__
Deay;IOOl'1 �• Y : Off
0 1 _ _ _
Al!<Dfl'<HI
�----------
Refresh
Data Encryption
Click the "Data Encryption" drop down. There are four settings to choose from:
Off/ File Encryption / Streaming Encryption / Both
Decryption Play
Click the "Decryption Play" drop down. There are two settings to choose from: Off/ On
Note: When choose on, user are able to display encrypted video in camera playback mode.
AES Key
To change AES Key, just input the new AES Key in the text box. The
AES Key is consist of letters & numbers.
After changing the settings, click "Apply" to save.
WfW camera I n fo N e tw o rk Se tt fl gs ca m era Settil<;is O tll e r Settilgs En cryp tio n Pa ssw o r d
C h a ng e Passw«d
I.Js
l.'fT ype : Gener� U ser
Admin L ogi,P a ss w ord : c_ ___ __J
New P ass w ord :
L_ ___ __J
R e ente!'Ne w Pass w or d : c_ ___ __J
From here you can change device passwords. Select the user type for the password that you wish to change. Enter the admin password, then enter the new password you wish to set for the user type, and confirm the password.
Click "Apply" to save the new password.
Note: Passwords can only be changed while logged in with the admin account. The admin password will always be required to make changes to any account passwords.
WtW
CMSV6 SOFTEARE
How to connect body camera to CMSV6
Note: The CMSV6 software is only for WIFI version camera.
1. Connect to CMSV6
2. Connect camera to CMSV6 platform
The instruction for network connection as below:
1. Open cam manager, Click "Network Settings" tap, then Click
"Protocol" drop down, which is under "Server Config".
Choose "CloudDMS", click "Apply" to save the setting.
2. Find "Server IP" under "Server Config", input the server IP provided by our company, click "Apply" to save the setting.
3. Find "Account" under "Server Config", input the account provided by our company, click "Apply" to save the setting.
CMSV6 SOFTEARE
4. Find "Server Port" under "Server Config", default setting is 6608, no need to change.
5. Find "APN" , input the APN of the SIM card, click "Apply" to save the setting.
The instruction for WIFI network connection as below:
1. Open cam manager, Click "Network Settings" tap, then Click "WIFI
Start" drop down, which is under "WIFI".
Choose "Always On", click "Apply" to save the setting. Click "Mode" drop down, which is under "WIFI", choose "STA", then click "Apply" to save the setting.
2. Find "STA Mode" under "WIFI", input the right WIFI name in the
"SSID" textbox, input the right WIFI password in the "Password" textbox, click "Apply'' to save the setting.
3.
After set up the WIFI, please open the
CMSV6 software, by double click
I
Input the right account, password & server IP address to log in.
' '
"""'
'E ..
----=i
�
Sttve<
[ru§" , .
,. ===:::J
G:I R� password 0 Logr, a.rtomabcaly
Wt=
■
CMSV6 SOFTEARE
4. How to use the CMSV6
1. Camera List
The camera status will be shown in the camera list.
Blue icon refers to camera online and GPS signal received;
Pink icon refers to camera online but GPS signal is not received yet;
Blue icon refers to camera offline.
2. PTT Audio control shows the information of the selected cameras:
Status: The camera basic info: Officer Name, Police Number, Vehicle
ID, Organization, Online status, Positioning Time, Location, Battery
Power.
PTZ: Not available
Color: Not available
VOiP: There are 3 modes, Intercom, Monitor and broadcast.
Intercom: Camera can have two way communication with CMSV6 platform. If PTT button is pushed, camera will transfer voice to CMSV6 platform.
CMSV6 SOFTEARE
Monitor: CMSV6 platform can check the video and audio from camera only.
Broadcast: CMSV6 platform can send audio broadcast to one or multiple cameras.
3. Start & Stop Intercom/Monitor
There are 3 ways to start & stop intercom/Monitor
(1) Choose the camera from camera list (Under Organization), right click the mouse, choose "Start Intercom" or "Start Monitor". Then right click the mouse, choose "Stop Intercom" or "Stop Monitor".
, � --�- -�-�+ �
0
All
El
@ O n l n e
·· D O
M on i tor Cente r ( S }
;
$ ···
$ ···
□
Q
Q
P .M
ElR dddmt ddd m t 2 l i l D l m"
O P OL IT
Q Offi n e
A N A { 0
.
)
1±1 -D I d m to C S t a rt I nt e r co m
S t a rt M o n i t o r
I �
0
1
(2) Find Intercom/Monitor under "VOiP", click "Open" button, then choose the camera you need to work with, click "OK" to confirm. To
.---------------,
Status PT Z Color VOIP
Q in t e r com @Monitor Q B<oadcast
� dmto!O
(Mi c)
Open
CMSV6 SOFTEARE
(3) Choose the camera on the maps, and click the "Intercom" or
"Monitor'' to start intercom or monitor.
dmt00l
Police number : dmto01
Dat e : 2020 06 01 09:53:07
Dev i ce N u mber : dmto0 I
Position : 22 .
607690 , 1 1 3.860123 sta t us : O nl i n e , 4G, GPS Invalid, Network signal normal
Vi d eo
I
I n terco m Mo n i t o r
I
Snapshot More i dm1 00 I
4. Start & Stop Broadcast
Find Broadcast under "VOiP", click "Open" button, then choose the cameras you need to broadcast to(multiple cameras can be choose), click "OK" to confirm. To stop, just click "Stop" button .
MIN
.:i
:.J
!
:
� l.
, cm,mm
( 5 }
•
□
□□
1 1 )
[fl 0
•
•
Li ....-='
Ll
O I chltOOI cht002 i,,,w,fTl"o, d,,tll 1 g,
0[fus
CllA)]
'TOl4' ) wD I d,,til11[Th s!,Toup ) w
•
.
-
D
.0
,....,
-
(.l c.J
1
I dddm dddmt2{lh1; �OUO ) ch
I ch w l
1
(This91o,x, ]
2[Th to t3[Th
,: q;,oup s,;,ouo
J
)
1 chto11
��t.wi('rh,s ,,,.
OI.C
l
Sta11J:5 PTZ CObr 'o'OIP lntffCOffl 0 Morm"
I�
_ u -
I @ �t l
1 1
'10
!> i
"'
oo . .
·I
�
·
:� t fnw; t 2 orQUI)]
[Ths,oroup J
0
'++.!!,=
I
01
0 1
0 1
Cl,,.]
"i, dmto
0 ll
;---.,
�t01 4
.,
..,
(Tt,is',1100-I) dml012[ThsQrouP
�t013rn.sorOUP
pmeuop,:atn,
1
J
]
]
]
[Ths ,,,.
oup )
CMSV6 SOFTEARE
5. Voice Dispatch
Choose "Voice dispatch" to make group voice talk.
D r g a n i z a ti o n 1 o i c e d i sp a § tm 111 , s
Gr o u p
S p e a kin g u s e r
Enter this PTT group
[ill
O nlin e t e s t
Leave this PTT group �
Get other camera into the PTT group
Get the camera out of the PTT group
[I]
[I]
Choose the cameras that you I ike to send messages to, input the text and send. Messages will be shown on the chosen camera's LCD screen. �
Refresh Interface �
Group talk
0
Audio recording @
MfW
CMSV6 SOFTEARE
6. GPS Maps: The camera location will be shown on the maps.
7. Reports: Reports will record the events, such as Personnel
Monitoring, Alarm Information, System Event, Schedule Event, Device
Reporting Information, Media List, My Map.
8. The Streaming Video: Click to see the video streaming.
9. Menu & Tool:
Map: Shows the GPS location of cameras.
Video: Shows the video streaming.
Track: The certain camera 's GPS routes with in certain period of time could be tracked.
Record: Check and search the videos that has been uploaded to
CMSV6 software.
Manage: Account management.
Other: Other settings.
�� -
---------
<-, .
+
,tA
·
\
•
-
.
.,.'z I � , ,.
-
I .
:,\--../...,,,_J....,; .. r-i • •
-
•
.-
----1 ... ._; t!l
.
....
·-
�
.:
: , Iii ro
CMSV6 SOFTEARE
10. Live Video Streaming
(1) Open the streaming video, by double click the camera from the camera list to open the preview of camera live streaming.
(2) Preview view: By changing
[i]
(3) Zoom in/Zoom out: By clicking the streaming video.
■ fi.11 l;I
•
■
Jl!!l� to set the preview quantities of camera on each page.
::: � ::::
■■■■• •••
�l§:J to zoom in and zoom out
(4) Next page: By clicking �� to change pages.
(5) Display ratio: By clicking �-� T to set the display ratio, and there are four options: Full screen, 4:3, 16:9, and Original Rario
Display.
(6) [ liJ
T J Display mode: Set the video mode: Real Good, Fluent
Good.
- Real good mode will take video's real time as priority, so less latency.
- Fluent Good will take video's fluency as priority, so video will be fluent.
(7)
[
01
T :
Capture mode: Capture Image & Front end Capture
Capture Image: Take a screenshot from CMSV6 software(must open the live video preview) .
Front end Capture: Take a photo using camera (don't have to open the live video preview).
-,-
CMSV6 SOFTEARE
(8) [ iJI I ..,,.
:
Volume: To enable/disable voice and tuning voice volume.
(9)
[E8
Start Video:
Start Video: Start the video preview of the selected video window;
Open All Videos (The current page): Start all the videos on the current page;
Open All Videos (All pages): Start all the videos of all pages;
Display Polling Window: Set certain time to display video.
(10) � Stop Video: To stop video and clear data.
(11) [� �] Full Screen: To make video preview set to full screen.
11. GPS Tracking
User can search GPS tracking and export the data. Firstly select camera, then input start & end time, click search.
CMSV6 SOFTEARE
Icon & Functions
Icon
®
@
@
@
@
I
File
I
Functions
Start or stop tracking playback
Finish tracking playback
Delete the GPS tracking
Export the GPS tracking to Excel file
Turn the GPS tracking to GPS routes
The history log of searched GPS trackings
12. Video Playback
User can download the recorded files from camera and play it back:
(1) Select camera, define the date & time, then select "Storage Server
(Video)", click "Search" to start searching. If searching photo, please select "Storage Server(Photo )".
0-
.
.
CMSV6 SOFTEARE
(2) After searching, select "File" to check the recorded files.
/'f, 0
:?OJXll.-1113;19;!4
2011)(11.L �ll:-
(3) Select the file you want to download, double click mouse or right click mouse, select file download to download the file. The download status could be checked in "Download" part.
(4) Use hplayer or other player to playback the downloaded files.
(5) If video download stopped or failed due to network issue, the file can be continue downloading by clicking "Continue Download".
MfM
Q&A
Question Analysis Answer
Out of battery Charge for 4 hours.
Use Reset button.
Charging time should not be less than 4 hours. is short
USB port of
Interrupted supply enough frequently power
Camera can't be recognized by PC Wrong driver
Use the USB port of back panel
Change USB cable.
Reinstall driver.
NOTICE FOR USER
Even if within the warranty period, if the following occurs, certain maintenance costs will be charged.
(1) The malfunction and damaged caused by incorrect use, the unauthorized repairs and alteration.
(2) The damage caused by fire, flood, abnormal voltage, other natural disasters and secondary product damage.
(3) he product malfunction caused by the fall and transportation failures after purchase.
Mi:@
NOTICE FOR USER
(4) The product malfunction caused by Not in accordance with the user manual operation.
(5) The malfunction and damaged caused by the other barriers (man made factors or external device).
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help important announcement
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement