3B Scientific 1000994 [U8497700] Assembly Kit “Bell, Relay and Bimetallic Switch ” Owner's Manual
Add to My manuals2 Pages
advertisement
3B SCIENTIFIC® PHYSICS
Assembly Kit “Bell, Relay and Bimetallic Switch” 1000994
Instruction Sheet
10/15 SP/ALF
1 Base plate
2 U-core
3 Fixing screw for U-core
4 Coil
5 Bell
6 Contact rods
7 Bimetallic strip
8 Armature
9 Leaf spring
10 Contact pin
1. Description
The bell, relay and bimetallic switch assembly kit is used to construct different types of electromagnetic switches and bimetallic strip switches.
2. Equipment supplied
1 Base-plate with three fixing positions
1 Bell, 70 mm diameter
2 Contact rods, each with three 4 mm holes
1 Leaf spring with plug
1 Bimetallic strip with plug
1 Armature with plug
1 Contact pin with plug
1 U-core, 20
20 mm²
1 Fixing screw for U-core
1 Coil, 800 turns.
Base plate:
Weight:
3. Technical data
200
140
40 mm
1.6 kg approx.
3 approx.
4. Example switch assemblies
To assemble the switches the following additional equipment is needed:
1 Transformer with rectifier @230 V
1003316 or
1 Transformer with rectifier @115 V
1003315
1 Lamp socket E14 1000947
1 Filament lamp, 12 V, 25 W, E14, as typical consumer item
1
4.1 Assembly of a bell circuit
Fig 1 Assembly of a bell circuit
4.2 Assembly of a relay
Fig. 2 Circuit diagram for a bell
Fig 3 Assembly of a relay
4.3 Assembly of a bimetallic switch circuit
Fig. 4 Circuit diagram for a relay
Fig. 6 Circuit diagram for a bimetallic switch
Fig. 5 Assembly of a bimetallic switch circuit
3B Scientific GmbH
▪ Rudorffweg 8 ▪ 21031 Hamburg ▪ Germany ▪ www.3bscientific.com
Subject to technical amendments
© Copyright 2015 3B Scientific GmbH
advertisement
Related manuals
advertisement