Electro-Voice 924 Engineering Data
PDF
Document
Advertisement
Advertisement
ENGINEERING DATA DESCRIPTION AND APPLICATIONS The Electro-Voice model 924 is a crystal, omni- directional microphone providing smooth response from 60 to 10,000 Hz. It is excellent for home re- cording, paging, public address, and amateur radio. The model 924 is easy to hold by hand or to use as a lavalier microphone because of its small size. It is ideal for use wherever microphone concealment, individual mobility, or free movement of the hands is desired. The microphone is equipped with a pop-proof wire mesh grill which minimizes wind and breath blast. It is supplied complete with neck cord, support clip, and 18-foot single-conductor cable. The model 924 should be connected for operation in- to aload the value of which is not less than 500, 000 ohms. An even higher resistance value will further enhance low-frequency response. The microphone lead is connected to the grid of the input tube and the cable shieldis connected to chassis ground. The crystal may be seriously damaged if connected to amplifier loudspeaker terminals or power supply unit carrying a high voltage. CAUTION NOTES Crystal microphones should not be exposed to temperatures higher than 112°. Do not place in direct sunlight, closed automobiles, or show win- dows in hot weather for extended periods of time. Crystal and ceramic microphone elements function as voltage generators. Use ofextremely long cables results in relatively severe attenuation of the sig- Downloaded from www.Manualslib.com manuals search engine nals generated by these devices. Generally, cables longer than 20 feet should not be used. Attenuation resulting from the use of longer cables is illustrated below: Cable Length in Feet Loss of Level, in db 20 40 60 100 150 200 En a WN RF © arn © hh 0 SPECIFICATIONS ELEMENT: Crystal FREQUENCY RESPONSE: 60 - 10,000 Hz POLAR PATTERN: Omnidirectional IMPEDANCE: Hi-Z OUTPUT LEVEL: —60 db (0 db = 1 volt/dyne/cm?) EIA SENSITIVITY: —160 db DIAPHRAGM: Aluminum CASE: Pressure Cast DIMENSIONS: —1-17/32" dia. x 3-5/32" length FINISH: Satin Chrome NET WEIGHT: 10 oz. including cable CABLE: 18-foot, single-conductor, shielded rubber-jacketed ACCESSORIES INCLUDED: Neck cord and support clip TEMPERATURE: Crystal microphones should not be exposed to temperatures higher than 1129F, ANOHdMONDIN YAVMIVAVAI “IVLSAYJO vZ6 Part No. 533567 Ey) ELECTRO ARCHITECTS’ AND ENGINEERS' SPECIFICATIONS | The microphone shall be an omnidirectional type with uniform frequency response from 60 to 10,000 Hz. The diaphragm shall be aluminum. Output level shall be —60 db (0 db =1 volt/dyne/cm2). EIA sensitivity rating shall be —160 db. The case shall be pressure cast, The microphone shall have a diameter of 1-17/32 inches, and a length of 3- 5/32 inches. Net weight shall be 10 oz. including cable. Finish shall be satin chrome, An 18-foot, single conductor, shielded, rubber jacketed cable shall befurnished. Lavalier neck cord and support clip shall be supplied. The Electro-Voice model 924 is specified, — 1-7/31 DIA, — MODEL #24 CRYSTAL 3-5/32 ELECTRO -VONCE, ШС. card, MIE EA, Figure 2 - Dimensions Downloaded from www.Manualslib.com manuals search engine WARRANTY The Electro-Voice model 924 microphone is guar- anteed against defects in materials and workman- ship for one year. Damage to the crystal element because of exposure to excessive temperatures is not covered by this warranty. | Ts LC = E 88883387 ВЕБЕ à 5 FREQUENCY IN CYCLES РЕН SECOND Figure 1 - Frequency Response Fe a ) E =) | Figure 3 - Wiring Diagram 1266 -VOICE, INC. / Buchanan, Michigan Litho in U.S.A. ">
/
Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Advertisement