Genee World GV2100 User Manual
Genee World GV2100 visualiser is equipped with a 1/4” professional CCD, 22x optical zoom, and 10x digital zoom, allowing you to capture clear and detailed images of various objects. It features auto white balance and focus, ensuring optimal image quality in different lighting conditions. With its versatile connectivity options, including RGB and USB outputs, you can easily connect the visualiser to a projector, TV, or computer for presentations or video conferencing.
Anuncio
Anuncio
G en ee
World
TM
User manual
2100
®
PARTS IDENTIFICATION
Precautions
Please follow these precautions:
To prevent fire or shock hazard, do not expose the unit to rain or moisture
To prevent electrical shock, do not open the cabinet, Refer to qualified personal for service only
Do not use the unit continuously for more then 24 hours with camera auto focus on. It may cause damage to the camera lens
Be careful not to spill water or other liquids onto the unit, or allow combustible or metallic objects to get inside the cabinet
Unplug the visualiser from the wall outlet when it is not in use for an extended period of time
Clean the cabinet with a soft cloth lightly moistened with a mild detergent
Clean the lens carefully with an air spray or soft dry cloth to avoid scratching
When lamps flashes or become dark, they should be replaced with new ones
Base
Mirror
Mirror stand
Camera stand
Camera head
PARTS IDENTIFICATION
Precautions
Please follow these precautions:
To prevent fire or shock hazard, do not expose the unit to rain or moisture
To prevent electrical shock, do not open the cabinet, Refer to qualified personal for service only
Do not use the unit continuously for more then 24 hours with camera auto focus on. It may cause damage to the camera lens
Be careful not to spill water or other liquids onto the unit, or allow combustible or metallic objects to get inside the cabinet
Unplug the visualiser from the wall outlet when it is not in use for an extended period of time
Clean the cabinet with a soft cloth lightly moistened with a mild detergent
Clean the lens carefully with an air spray or soft dry cloth to avoid scratching
When lamps flashes or become dark, they should be replaced with new ones
Base
Mirror
Mirror stand
Camera stand
Camera head
Notes:
CONTROL PANEL
Folding the Unit
1. Use one hand to hold the base of the visualiser and the rotate the camera head to the marked position and flip the camera head to point toward the base
Power button
Press the button once to power on the visualiser; press the button again to power off the visualiser
Output visualiser signal button
Press the button, the RGB OUTPUT terminal outputs the visualiser
Output computer signal button
Press the button, the RGB OUTPUT terminal outputs computer signal
Auto button A
Press the A button to automatically adjust white balance and focus
Light button
Each time you press the button, the lighting changes as below:
Specifications
REMOTE CONTROL
Pickup device
Total pixels
RGB output pixels
Lens
Focus
Focus/Iris
Image split
RGB input
White balance
Image function
RGB output resolution
Video output
Video resolution
USB connector
Arm light
Back light
Colour adjustment
1/4” professional CCD
470,000
780,000
F=1.6-3.7mm/f=3.9-85.8mm
22x optical, 10x digital
Auto/Manual
Auto
Yes
Negatives/Positives, freeze, mirror, B&W
DB15FLC*1
XGA, SVGA
RCA*1, Min DIN4*1
More than 480 TV lines
USB 2.0
1W LED*2
LED
Yes
Brightness adjustment Yes
The remote control can control the camera from different angles. Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects situated between the visualiser and the infrared remote control and a weak battery may interfere with the reception.
POWER : Press the “POWER” button once to power on the visualiser, press the “POWER” button again to power off the visualiser
NEG : Press the “NEG” button once to display file negatives and press the
“NEG” again to display normal
MIRROR : Press the “MIRROR” button to vertically reverse the image; press the “MIRROR” button again to exit the mirror mode
Zoom button
Press the or button to zoom in or zoom out
Notes:
CONTROL PANEL
Folding the Unit
1. Use one hand to hold the base of the visualiser and the rotate the camera head to the marked position and flip the camera head to point toward the base
Power button
Press the button once to power on the visualiser; press the button again to power off the visualiser
Output visualiser signal button
Press the button, the RGB OUTPUT terminal outputs the visualiser
Output computer signal button
Press the button, the RGB OUTPUT terminal outputs computer signal
Auto button A
Press the A button to automatically adjust white balance and focus
Light button
Each time you press the button, the lighting changes as below:
Specifications
REMOTE CONTROL
Pickup device
Total pixels
RGB output pixels
Lens
Focus
Focus/Iris
Image split
RGB input
White balance
Image function
RGB output resolution
Video output
Video resolution
USB connector
Arm light
Back light
Colour adjustment
1/4” professional CCD
470,000
780,000
F=1.6-3.7mm/f=3.9-85.8mm
22x optical, 10x digital
Auto/Manual
Auto
Yes
Negatives/Positives, freeze, mirror, B&W
DB15FLC*1
XGA, SVGA
RCA*1, Min DIN4*1
More than 480 TV lines
USB 2.0
1W LED*2
LED
Yes
Brightness adjustment Yes
The remote control can control the camera from different angles. Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects situated between the visualiser and the infrared remote control and a weak battery may interfere with the reception.
POWER : Press the “POWER” button once to power on the visualiser, press the “POWER” button again to power off the visualiser
NEG : Press the “NEG” button once to display file negatives and press the
“NEG” again to display normal
MIRROR : Press the “MIRROR” button to vertically reverse the image; press the “MIRROR” button again to exit the mirror mode
Zoom button
Press the or button to zoom in or zoom out
LAMP below:
: Each time you press button, the lighting changes as
Click “Capture” - “Start Capture”, input the file name in dialogue box, or click icon on the toolbar, then input the file name in dia logue box. If you want to set the time limit for the capture, select
“Capture” - “set Time Limit” to set the time limit. Click “Start
Capture” to start capture, and click “Stop Capture” or icon on the toolbar to stop capture. (If you have set the time limit, it will stop automatically when the time is set up.) The video file is AVI format.
FREEZE : Press the “FREEZE” button once to freeze the image. Press
C. Set the Frame Rate
Click [Capture] - [Set Frame Rate], and then click open “Choose
Frame Rate” to set the frame rate.
(800x600) mode. Press the “XGA” button again to display images at
D. Set Time Limit
Click [Capture] - [Set Time Limit] to set the time limit while capturing video.
and white mode. Press the “B&W” button again to display images at
E. Note
Do Not connect/disconnect the USB cable when the application is running, which will cause the program to be interrupted.
images. One is the live image and the other is a frozen image. Press
Other applications
Displaying standard slides and negatives
D./S : Press the “D./S” button once to display still images with better clarity. Press “D./S” button again to display moving objects at head, then turn on the back light to display the slide or negative.
TEXT : Press the “TEXT” button once to switch to the text mode to
TITLE : Press the “TITLE” button once to freeze top 1/8 of the screen.
Press the “TITLE” button again to exit
AUTO : Press the “AUTO” button to automatically adjust the white balance and focus
TELE/WIDE : Press the “TELE” button to zoom in and press the “WIDE” button to zoom out
Install visualiser on the wall and position the camera head vertically to the base. (Need to take close-up lens off first)
CDD : Press the “CDD” button to display the camera (visualiser) signal
RGB : Press “RGB” button to display the computer signal
BRIGHT +/: Press the “+” button to increase the brightness. Press the
“-” to decrease the brightness
RED +/-: Press the “+” button to increase the red hue. Press the “-” to
Ceiling mounting applications
BLUE +/: Press the “+” button to increase the blue hue. Press the “-” to decrease the blue hue
LAMP below:
: Each time you press button, the lighting changes as
Click “Capture” - “Start Capture”, input the file name in dialogue box, or click icon on the toolbar, then input the file name in dia logue box. If you want to set the time limit for the capture, select
“Capture” - “set Time Limit” to set the time limit. Click “Start
Capture” to start capture, and click “Stop Capture” or icon on the toolbar to stop capture. (If you have set the time limit, it will stop automatically when the time is set up.) The video file is AVI format.
FREEZE : Press the “FREEZE” button once to freeze the image. Press
C. Set the Frame Rate
Click [Capture] - [Set Frame Rate], and then click open “Choose
Frame Rate” to set the frame rate.
(800x600) mode. Press the “XGA” button again to display images at
D. Set Time Limit
Click [Capture] - [Set Time Limit] to set the time limit while capturing video.
and white mode. Press the “B&W” button again to display images at
E. Note
Do Not connect/disconnect the USB cable when the application is running, which will cause the program to be interrupted.
images. One is the live image and the other is a frozen image. Press
Other applications
Displaying standard slides and negatives
D./S : Press the “D./S” button once to display still images with better clarity. Press “D./S” button again to display moving objects at head, then turn on the back light to display the slide or negative.
TEXT : Press the “TEXT” button once to switch to the text mode to
TITLE : Press the “TITLE” button once to freeze top 1/8 of the screen.
Press the “TITLE” button again to exit
AUTO : Press the “AUTO” button to automatically adjust the white balance and focus
TELE/WIDE : Press the “TELE” button to zoom in and press the “WIDE” button to zoom out
Install visualiser on the wall and position the camera head vertically to the base. (Need to take close-up lens off first)
CDD : Press the “CDD” button to display the camera (visualiser) signal
RGB : Press “RGB” button to display the computer signal
BRIGHT +/: Press the “+” button to increase the brightness. Press the
“-” to decrease the brightness
RED +/-: Press the “+” button to increase the red hue. Press the “-” to
Ceiling mounting applications
BLUE +/: Press the “+” button to increase the blue hue. Press the “-” to decrease the blue hue
Installing the Software
Connections
The function of the Video Cap software is to snap and display images with the USB interface, which includes displaying static and dynamic pictures, snapping dynamic images and playback the dynamic images with the Windows Media Player or similar player.
A. Insert the CD-ROM that comes with your visualiser into the CD-ROM drive. if Auto run is enabled on your system, then the Software Setup window will be displayed automatically as below.
If it does not start automatically, after inserting the CD-ROM, click
DC-12V IN : External 12V power adaptor input connection the above screen will appear immediately
(the CD-ROM drive letter might be different in different computer systems) and then
S-VIDEO-OUT/VIDEO-OUT : Visualiser video output
RGB-OUT1/RGB-OUT2 : RGB output (output the same signal)
C. Click the Install Capture Program button to install the program that
RGB-IN
USB : Computer image capture and video recording for both PC and MAC
: Laptop, computer or other RGB signal input
D. Click the Install USB Driver button to install the driver designed for the visualiser and will be used by the Capture Program
E. After the installation is finished, then click the Exit button to exit the
Software Setup Window
F. Shut down your computer when prompted in order for the changes to take effect
G. Use the USB2.0 cable provided to connect your computer to the visualiser before your computer is restarted
H. Turn on the visualiser
Remarks: DirectX9.0 is not necessary to install, it is mainly for computer print screen function
Please pay attention to the following:
1. Computer hardware requirements; CPU: Pentium 4 2.0G or above,
RAM: 256M or above, USB 2.0 port, Hard disk 40G or more
2. Operating system: Windows 2000 or above. If the operating system is Windows 2000, should install SP4. If the operating system is
Windows XP, you should install SP1
1. Use one hand to hold the base of the visualiser and use the other hand to carefully lift up the mirror stand of the unit on the rear of the mainframe. The USB port on the front of the computer might have interference.
5. You may need to install the USB driver again when you change a computers USB port. If this port has USB 2.0 driver installed, there is no need to install the USB driver again
2. Place the camera stand to the maximum position crossbar”, and then set INPUT as Video Composite In.
USB capture for MAC computers
Copy the folder “Mac Driver” into MAC hard disk, open the folder and double click “Empia 1.0.0b2.zip”, the “setup” file appears. Following the screen notice, click “Next” and finish installation.
Notes
1. Please connect the MAC computer and visualiser when installing the driver
2. Please use the USB 2.0 cable provided with your visualiser
3. Rotate the camera head, make sure that mark E on the Camera head is in line with mark B on the camera stand
Video display and capture
You can capture and control images on the visualiser from a computer connected with a USB connector
Click [Start] - [Program] - [VideoCap] - “VideoCapx.xx” (x.xx is softwares version) to open the software
A. Static Image Setup
Click “Capture” - “Capture Frame”, input the file name in dialogue box, or you can click icon on the toolbar, then input file name in dialogue window.
The image file is JPG format
ATTENTION : When mark E is in line with A, the camera head and the base are parallel. When mark E is in line with mark D, the camera head and the base are vertical. When the visualiser is folded, mark E is in line with mark C
Installing the Software
Connections
The function of the Video Cap software is to snap and display images with the USB interface, which includes displaying static and dynamic pictures, snapping dynamic images and playback the dynamic images with the Windows Media Player or similar player.
A. Insert the CD-ROM that comes with your visualiser into the CD-ROM drive. if Auto run is enabled on your system, then the Software Setup window will be displayed automatically as below.
If it does not start automatically, after inserting the CD-ROM, click
DC-12V IN : External 12V power adaptor input connection the above screen will appear immediately
(the CD-ROM drive letter might be different in different computer systems) and then
S-VIDEO-OUT/VIDEO-OUT : Visualiser video output
RGB-OUT1/RGB-OUT2 : RGB output (output the same signal)
C. Click the Install Capture Program button to install the program that
RGB-IN
USB : Computer image capture and video recording for both PC and MAC
: Laptop, computer or other RGB signal input
D. Click the Install USB Driver button to install the driver designed for the visualiser and will be used by the Capture Program
E. After the installation is finished, then click the Exit button to exit the
Software Setup Window
F. Shut down your computer when prompted in order for the changes to take effect
G. Use the USB2.0 cable provided to connect your computer to the visualiser before your computer is restarted
H. Turn on the visualiser
Remarks: DirectX9.0 is not necessary to install, it is mainly for computer print screen function
Please pay attention to the following:
1. Computer hardware requirements; CPU: Pentium 4 2.0G or above,
RAM: 256M or above, USB 2.0 port, Hard disk 40G or more
2. Operating system: Windows 2000 or above. If the operating system is Windows 2000, should install SP4. If the operating system is
Windows XP, you should install SP1
1. Use one hand to hold the base of the visualiser and use the other hand to carefully lift up the mirror stand of the unit on the rear of the mainframe. The USB port on the front of the computer might have interference.
5. You may need to install the USB driver again when you change a computers USB port. If this port has USB 2.0 driver installed, there is no need to install the USB driver again
2. Place the camera stand to the maximum position crossbar”, and then set INPUT as Video Composite In.
USB capture for MAC computers
Copy the folder “Mac Driver” into MAC hard disk, open the folder and double click “Empia 1.0.0b2.zip”, the “setup” file appears. Following the screen notice, click “Next” and finish installation.
Notes
1. Please connect the MAC computer and visualiser when installing the driver
2. Please use the USB 2.0 cable provided with your visualiser
3. Rotate the camera head, make sure that mark E on the Camera head is in line with mark B on the camera stand
Video display and capture
You can capture and control images on the visualiser from a computer connected with a USB connector
Click [Start] - [Program] - [VideoCap] - “VideoCapx.xx” (x.xx is softwares version) to open the software
A. Static Image Setup
Click “Capture” - “Capture Frame”, input the file name in dialogue box, or you can click icon on the toolbar, then input file name in dialogue window.
The image file is JPG format
ATTENTION : When mark E is in line with A, the camera head and the base are parallel. When mark E is in line with mark D, the camera head and the base are vertical. When the visualiser is folded, mark E is in line with mark C
Step 1: Connect to the computer
Monitor
4. Place the mirror stand to the maximum position
5. Rotate the mirror to the position so that the two mark lines line up
6. Making connections
Before making any connections, turn off all the power. Please ensure that the visualiser along with all other equipment is turned off.
Side Panel
Computer
Step 2: Connect to the projector and video equipment
RGB Output
Projector
Video Output
Video Equipment
Video Output
Rear Panel
Step 3: Connect to power source
Once the visualiser is set up, plug in the power adaptor that comes with your visualiser into the DC 12V IN connector and an external power source. Press the power button on the operating panel to turn on the visualiser
Step 1: Connect to the computer
Monitor
4. Place the mirror stand to the maximum position
5. Rotate the mirror to the position so that the two mark lines line up
6. Making connections
Before making any connections, turn off all the power. Please ensure that the visualiser along with all other equipment is turned off.
Side Panel
Computer
Step 2: Connect to the projector and video equipment
RGB Output
Projector
Video Output
Video Equipment
Video Output
Rear Panel
Step 3: Connect to power source
Once the visualiser is set up, plug in the power adaptor that comes with your visualiser into the DC 12V IN connector and an external power source. Press the power button on the operating panel to turn on the visualiser
Installing the Software
Connections
The function of the Video Cap software is to snap and display images with the USB interface, which includes displaying static and dynamic pictures, snapping dynamic images and playback the dynamic images with the Windows Media Player or similar player.
A. Insert the CD-ROM that comes with your visualiser into the CD-ROM drive. if Auto run is enabled on your system, then the Software Setup window will be displayed automatically as below.
If it does not start automatically, after inserting the CD-ROM, click
DC-12V IN (the CD-ROM drive letter might be different in different computer systems) and then
RGB-OUT1/RGB-OUT2 : RGB output (output the same signal)
C. Click the Install Capture Program button to install the program that
RGB-IN : Laptop, computer or other RGB signal input
D. Click the Install USB Driver button to install the driver designed for
USB : Computer image capture and video recording for both PC and MAC
Software Setup Window
F. Shut down your computer when prompted in order for the changes to take effect
G. Use the USB2.0 cable provided to connect your computer to the visualiser before your computer is restarted
H. Turn on the visualiser
Remarks: DirectX9.0 is not necessary to install, it is mainly for computer print screen function
Please pay attention to the following:
1. Computer hardware requirements; CPU: Pentium 4 2.0G or above,
RAM: 256M or above, USB 2.0 port, Hard disk 40G or more
2. Operating system: Windows 2000 or above. If the operating system is Windows 2000, should install SP4. If the operating system is
Windows XP, you should install SP1
1. Use one hand to hold the base of the visualiser and use the other hand to carefully lift up the mirror stand of the unit on the rear of the mainframe. The USB port on the front of the computer might have interference.
5. You may need to install the USB driver again when you change a computers USB port. If this port has USB 2.0 driver installed, there is no need to install the USB driver again need to set the signal input source as follows: click “Option” - “Video crossbar”, and then set INPUT as Video Composite In.
USB capture for MAC computers
Copy the folder “Mac Driver” into MAC hard disk, open the folder and double click “Empia 1.0.0b2.zip”, the “setup” file appears. Following the screen notice, click “Next” and finish installation.
Notes
1. Please connect the MAC computer and visualiser when installing the driver
2. Please use the USB 2.0 cable provided with your visualiser
3. Rotate the camera head, make sure that mark E on the Camera head is in line with mark B on the camera stand
Video display and capture
You can capture and control images on the visualiser from a computer connected with a USB connector
Click [Start] - [Program] - [VideoCap] - “VideoCapx.xx” (x.xx is softwares version) to open the software
A. Static Image Setup
Click “Capture” - “Capture Frame”, input the file name in dialogue box, or you can click icon on the toolbar, then input file name in dialogue window.
The image file is JPG format
ATTENTION : When mark E is in line with A, the camera head and the base are parallel. When mark E is in line with mark D, the camera head and the base are vertical. When the visualiser is folded, mark E is in line with mark C
Installing the Software
Connections
The function of the Video Cap software is to snap and display images with the USB interface, which includes displaying static and dynamic pictures, snapping dynamic images and playback the dynamic images with the Windows Media Player or similar player.
A. Insert the CD-ROM that comes with your visualiser into the CD-ROM drive. if Auto run is enabled on your system, then the Software Setup window will be displayed automatically as below.
If it does not start automatically, after inserting the CD-ROM, click
DC-12V IN (the CD-ROM drive letter might be different in different computer systems) and then
RGB-OUT1/RGB-OUT2 : RGB output (output the same signal)
C. Click the Install Capture Program button to install the program that
RGB-IN : Laptop, computer or other RGB signal input
D. Click the Install USB Driver button to install the driver designed for
USB : Computer image capture and video recording for both PC and MAC
Software Setup Window
F. Shut down your computer when prompted in order for the changes to take effect
G. Use the USB2.0 cable provided to connect your computer to the visualiser before your computer is restarted
H. Turn on the visualiser
Remarks: DirectX9.0 is not necessary to install, it is mainly for computer print screen function
Please pay attention to the following:
1. Computer hardware requirements; CPU: Pentium 4 2.0G or above,
RAM: 256M or above, USB 2.0 port, Hard disk 40G or more
2. Operating system: Windows 2000 or above. If the operating system is Windows 2000, should install SP4. If the operating system is
Windows XP, you should install SP1
1. Use one hand to hold the base of the visualiser and use the other hand to carefully lift up the mirror stand of the unit on the rear of the mainframe. The USB port on the front of the computer might have interference.
5. You may need to install the USB driver again when you change a computers USB port. If this port has USB 2.0 driver installed, there is no need to install the USB driver again need to set the signal input source as follows: click “Option” - “Video crossbar”, and then set INPUT as Video Composite In.
USB capture for MAC computers
Copy the folder “Mac Driver” into MAC hard disk, open the folder and double click “Empia 1.0.0b2.zip”, the “setup” file appears. Following the screen notice, click “Next” and finish installation.
Notes
1. Please connect the MAC computer and visualiser when installing the driver
2. Please use the USB 2.0 cable provided with your visualiser
3. Rotate the camera head, make sure that mark E on the Camera head is in line with mark B on the camera stand
Video display and capture
You can capture and control images on the visualiser from a computer connected with a USB connector
Click [Start] - [Program] - [VideoCap] - “VideoCapx.xx” (x.xx is softwares version) to open the software
A. Static Image Setup
Click “Capture” - “Capture Frame”, input the file name in dialogue box, or you can click icon on the toolbar, then input file name in dialogue window.
The image file is JPG format
ATTENTION : When mark E is in line with A, the camera head and the base are parallel. When mark E is in line with mark D, the camera head and the base are vertical. When the visualiser is folded, mark E is in line with mark C
LAMP below:
: Each time you press button, the lighting changes as box, or click icon on the toolbar, then input the file name in dia logue box. If you want to set the time limit for the capture, select
“Capture” - “set Time Limit” to set the time limit. Click “Start
Capture” to start capture, and click “Stop Capture” or icon on the toolbar to stop capture. (If you have set the time limit, it will stop automatically when the time is set up.) The video file is AVI format.
C. Set the Frame Rate
Click [Capture] - [Set Frame Rate], and then click open “Choose
XGA : Press the “XGA” button once to display images from SVGA
(800x600) mode. Press the “XGA” button again to display images at
B&W : Press the “B&W” button once to display images at the black and white mode. Press the “B&W” button again to display images at
SPLIT : Press the “SPLIT” button and the image will be split into two images. One is the live image and the other is a frozen image. Press
D./S : Press the “D./S” button once to display still images with
TEXT : Press the “TEXT” button once to switch to the text mode to sharpen the edge of the text. Press the “TEXT” button again to return to
TITLE : Press the “TITLE” button once to freeze top 1/8 of the screen.
Press the “TITLE” button again to exit
AUTO : Press the “AUTO” button to automatically adjust the white balance and focus
TELE/WIDE : Press the “TELE” button to zoom in and press the “WIDE” button to zoom out
FAR/NEAR : Press the “FAR” button to focus far and press the “NEAR” button to focus near
CDD : Press the “CDD” button to display the camera (visualiser) signal
RGB : Press “RGB” button to display the computer signal
BRIGHT +/: Press the “+” button to increase the brightness. Press the
“-” to decrease the brightness
RED +/-: Press the “+” button to increase the red hue. Press the “-” to decrease the red hue
Ceiling mounting applications
BLUE +/: Press the “+” button to increase the blue hue. Press the “-” down the four screws to fix the base and then mount the visualiser to the ceiling.
LAMP below:
: Each time you press button, the lighting changes as box, or click icon on the toolbar, then input the file name in dia logue box. If you want to set the time limit for the capture, select
“Capture” - “set Time Limit” to set the time limit. Click “Start
Capture” to start capture, and click “Stop Capture” or icon on the toolbar to stop capture. (If you have set the time limit, it will stop automatically when the time is set up.) The video file is AVI format.
C. Set the Frame Rate
Click [Capture] - [Set Frame Rate], and then click open “Choose
XGA : Press the “XGA” button once to display images from SVGA
(800x600) mode. Press the “XGA” button again to display images at
B&W : Press the “B&W” button once to display images at the black and white mode. Press the “B&W” button again to display images at
SPLIT : Press the “SPLIT” button and the image will be split into two images. One is the live image and the other is a frozen image. Press
D./S : Press the “D./S” button once to display still images with
TEXT : Press the “TEXT” button once to switch to the text mode to sharpen the edge of the text. Press the “TEXT” button again to return to
TITLE : Press the “TITLE” button once to freeze top 1/8 of the screen.
Press the “TITLE” button again to exit
AUTO : Press the “AUTO” button to automatically adjust the white balance and focus
TELE/WIDE : Press the “TELE” button to zoom in and press the “WIDE” button to zoom out
FAR/NEAR : Press the “FAR” button to focus far and press the “NEAR” button to focus near
CDD : Press the “CDD” button to display the camera (visualiser) signal
RGB : Press “RGB” button to display the computer signal
BRIGHT +/: Press the “+” button to increase the brightness. Press the
“-” to decrease the brightness
RED +/-: Press the “+” button to increase the red hue. Press the “-” to decrease the red hue
Ceiling mounting applications
BLUE +/: Press the “+” button to increase the blue hue. Press the “-” down the four screws to fix the base and then mount the visualiser to the ceiling.
Notes:
CONTROL PANEL remote control to exit the mirror mode.
Folding the Unit
1. Use one hand to hold the base of the visualiser and the rotate the camera head to the marked position and flip the camera head to point toward the base
Power button
Press the button once to power on the visualiser; press the button again to power off the visualiser
Output visualiser signal button
Press the button, the RGB OUTPUT terminal outputs the visualiser signal
2. Fold the mirror stand after the camera stand is folded
Output computer signal button
Press the button, the RGB OUTPUT terminal outputs computer signal
Auto button A
Press the A button to automatically adjust white balance and focus
Light button
Each time you press the button, the lighting changes as below:
Specifications
REMOTE CONTROL
Pickup device
Total pixels
RGB output pixels
Lens
Focus
Focus/Iris
Image split
RGB input
White balance
Image function
RGB output resolution
Video output
Video resolution
USB connector
Arm light
Back light
Colour adjustment
1/4” professional CCD
470,000
780,000
F=1.6-3.7mm/f=3.9-85.8mm
22x optical, 10x digital
Auto/Manual
Auto
Yes
Negatives/Positives, freeze, mirror, B&W
DB15FLC*1
XGA, SVGA
RCA*1, Min DIN4*1
More than 480 TV lines
USB 2.0
1W LED*2
LED
Yes
Brightness adjustment Yes
The remote control can control the camera from different angles. Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects situated between the visualiser and the infrared remote control and a weak battery may interfere with the reception.
POWER : Press the “POWER” button once to power on the visualiser, press the “POWER” button again to power off the visualiser
NEG : Press the “NEG” button once to display file negatives and press the
“NEG” again to display normal
MIRROR : Press the “MIRROR” button to vertically reverse the image; press the “MIRROR” button again to exit the mirror mode
Zoom button
Press the or button to zoom in or zoom out
Notes:
CONTROL PANEL remote control to exit the mirror mode.
Folding the Unit
1. Use one hand to hold the base of the visualiser and the rotate the camera head to the marked position and flip the camera head to point toward the base
Power button
Press the button once to power on the visualiser; press the button again to power off the visualiser
Output visualiser signal button
Press the button, the RGB OUTPUT terminal outputs the visualiser signal
2. Fold the mirror stand after the camera stand is folded
Output computer signal button
Press the button, the RGB OUTPUT terminal outputs computer signal
Auto button A
Press the A button to automatically adjust white balance and focus
Light button
Each time you press the button, the lighting changes as below:
Specifications
REMOTE CONTROL
Pickup device
Total pixels
RGB output pixels
Lens
Focus
Focus/Iris
Image split
RGB input
White balance
Image function
RGB output resolution
Video output
Video resolution
USB connector
Arm light
Back light
Colour adjustment
1/4” professional CCD
470,000
780,000
F=1.6-3.7mm/f=3.9-85.8mm
22x optical, 10x digital
Auto/Manual
Auto
Yes
Negatives/Positives, freeze, mirror, B&W
DB15FLC*1
XGA, SVGA
RCA*1, Min DIN4*1
More than 480 TV lines
USB 2.0
1W LED*2
LED
Yes
Brightness adjustment Yes
The remote control can control the camera from different angles. Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects situated between the visualiser and the infrared remote control and a weak battery may interfere with the reception.
POWER : Press the “POWER” button once to power on the visualiser, press the “POWER” button again to power off the visualiser
NEG : Press the “NEG” button once to display file negatives and press the
“NEG” again to display normal
MIRROR : Press the “MIRROR” button to vertically reverse the image; press the “MIRROR” button again to exit the mirror mode
Zoom button
Press the or button to zoom in or zoom out
G en ee
World
TM
For technical assistance please call or email
Tel: +44 (0)870 386 1900 • Fax: +44 (0)870 405 0188
Email: [email protected] • Website: www.geneeworld.com
Post: PO Box 3256, Wolverhampton, WV3 0LA
Descargar
Enlace público actualizado
Se ha actualizado el enlace público a tu chat. Puedes ver y gestionar tus enlaces de chat después del registro aquí.
Enlace público del documento
Anuncio
