ETHERNET CONNECTION
Power Setting
Brightness Mode: Set the brightness of the displa y by selecting different modes through this setting.
Power Ti m er: Se t the projector to turn off automatically after some time.
(also see Home Screen > Setting > System > Date and Time > Timer ) .
So u rce
See Projection > Projecting an HDMI So u rce or an Apple Device and Projecting an AV So u rce
Ethernet Connection:
Q80+ projector can connect to a wired netwo rk through the Ethernet cable connection .
All Ethernet settings like IP addresses, gateway address, DNS etc. can be configured here.
27
