Bauhn ATV40FHD-0618 Instruction Manual

40” Full High Definition LED LCD TV

Model Number: ATV40FHD-0618

INSTRUCTION MANUAL

www.tempo.org

Model: ATV40FHD-0618 Product Code: 60668 06/2018 AUS 1300 886 649

Welcome

Congratulations on choosing to buy a BAUHN ® product. All products brought to you by BAUHN ® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year

Warranty.

We hope you will enjoy using your purchase for many years to come.

2

AUS 1300 886 649 www.tempo.org

Model: ATV40FHD-0618 Product Code: 60668 06/2018

Contents

Welcome

General Safety Instructions

Warranty Details

Remote Control

Installation

Controls and Connections

Getting Started

Basic Operations

Electronic Program Guide (EPG)

Recording

USB Mode

Menus

FAQs

Specifications

Repair and Refurbished Goods or Parts Notice

23

24

26

27

9

10

14

16

2

4

30

33

46

48

49



3

General Safety Instructions

Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all the warnings.

This product complies with Australian Safety standard AS/NZS 60065 to ensure the safety of the product.

The RCM is a visible indication of a product’s compliance with all applicable ACMA regulatory arrangements, including all technical and record-keeping requirements.

This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require connection to electrical earth.

To reduce the risk of electric shock, do not remove the cover (or back).

This unit contains no user-serviceable parts inside.

Refer all servicing to qualified service personnel only.

The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert you to the presence of non-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

IMPORTANT WARNINGS AND CAUTIONS

• Do not change or modify the appliance in any way.

• Only use the attachments/accessories specified by the manufacturer.

IMPORTANT INFORMATION

If the television is not positioned in a sufficiently stable location, it can be a potential hazardous and may fall. Many injuries, particularly to children, can be avoided by taking simple precautions:

• Use cabinets or stands recommended by the manufacturer of the television.

• Only use furniture that can safely support the television.

• Ensure the TV is not overhanging the edge of the supporting furniture.

• Do not place the TV on tall furniture (for example on a cupboard or bookcase) without anchoring both the furniture and the TV to a suitable support.

• Do not place the TV on cloth or other material between the TV and the supporting furniture.

• Educate children about the dangers of climbing on furniture to reach the television.

4



General Safety Instructions (Cont.)

Installation

Follow instructions: Only install this TV in accordance with instructions in this manual.

• WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. This TV is equipped with standard wall-mounting points, and we recommend that a wall bracket be installed between the TV and the wall to prevent the TV from falling from a cabinet . (The bracket is not included.)

• When deciding on where to put the TV set, make sure the place is:

• Well ventilated, and away from damp and cold.

• Protected from overheating and away from direct sunlight.

• Away from moisture drips or splashes.

• Protected from excessive dust or grease.

• Bookcase: Do not install this equipment in a confined space such as a bookcase or similar unit.

• Heat: Do not install the TV set near heat sources such as radiators, stoves or other audio visual equipment (including amplifiers) that produce heat.

• Water: Do not place containers with liquids (such as vases) or with small metallic objects on top of the unit. If liquid enters the unit or any metal object falls into the unit, it may result in short-circuit, fire or electric shock.

• Fire or explosion: Do not use or store flammable or combustible materials near the unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes or incense sticks on top of the TV set.

• Antenna: Install the antenna away from high-voltage power lines and communication cables and make sure it is installed securely. If the antenna touches a power line, contact with the antenna could result in fire, electric shock or serious injury.

• Ventilation: Install the unit at an adequate distance from the wall to ensure sufficient ventilation. If the temperature inside the unit rises, it may result in fire.Electrical Safety and Cord Handling

• Voltage: Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label.

• Protect from moisture: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture; do not use it anywhere near water; do not touch the power plug with wet hands.

• Power outlet: Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire. Make sure the outlet is readily accessible during operation of the equipment.

Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.



5


• Power plug: Make sure the plug is properly installed before inserting it fully into the outlet. A loose or improperly inserted power plug may cause a fire.

• Protect the cord: Do not bend, twist or kink the power cord excessively. Do not allow anything to rest on or roll over the power cord and antenna cable. Doing so may cause a fire or an electric shock. Do not run the power cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires, resulting in fire or electric shock.

• Damage: Do not use a damaged power cord, plug or loose outlet. Doing so may cause an electric shock.

• Disconnect: Always grasp the plug when disconnecting the power cord. Pulling the cord can damage the internal wire and may cause a fire.

• Terminals: Terminals are HAZARDOUS LIVE and the external wiring connected to these terminals requires installation by an INSTRUCTED PERSON or the use of ready-made leads or cords.

• Lightning storms: Unplug this TV during lightning storms or when unused for long periods of time. Not doing so may result in fire or electric shock.

Usage Conditions and Restrictions

• Adjustments: Follow the instructions in this manual when installing and adjusting the TV set.

Only adjust those controls that are covered in this manual, as improper adjustment of other controls may result in damage. If this happens, unplug the TV set and have it serviced by appropriately qualified personnel, or phone the after sales support line for advice.

• Ventilation: Do not cover the ventilation openings with items such as newspapers, tablecloths, curtains etc. as this could impede ventilation.

• Cabinet slots: Do not insert objects of any kind into this unit through the cabinet slots, as they could touch the current-carrying parts or short-circuit parts, resulting in fire, electric shock or damage to the unit.

• Smoke or odour: If you notice any unusual odours or smoke around the unit, immediately disconnect the unit from the outlet and contact the service centre. Failure to do so may result in fire or electric shock.

• When not in use: When not using the unit for long periods of time, disconnect the power cord fromww the wall outlet. Dust could accumulate over time on the unit and cause it to generate heat and ignite, or deteriorate insulation, which in turn may result in an electrical fire.

6




• Moving: When moving the unit, be sure to turn it off and unplug it from the wall outlet. Moving the unit with the power cord connected to the outlet may cause damage to the cord, resulting in fire or electric shock.

• Packaging: This product has been packaged to protect it against transportation damage.

Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use.

• Batteries: When removing the batteries from the remote control, make sure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery. Please dispose of batteries responsibly by recycling at your nearest recycling centre.

WARNING!

Batteries shall not be exposed to excessive heat such as sunshine, fire or souces of heating.

• Usage restriction: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the product by a person responsible for their safety.

• Children: Supervise young children to ensure they do not play with the TV.

Cleaning and Maintenance

• Unplug: To reduce the risk of fire and electric shock, always unplug the TV before cleaning it.

• Cleaning: Only use a soft, dry cloth for cleaning the TV; do not use a damp cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent or other chemicals. Wipe off any moisture, dirt or dust on the power plug pins with a clean, dry cloth.

• Repair: If the unit requires repair, contact the after sales support line; never disassemble or modify the unit or attempt to service it yourself.

• Service: Refer all servicing to qualified service personnel. Servicing is required when the TV has been damaged, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the TV, when the TV has been exposed to rain or moisture, does not operate normally, or has been dropped.



7


Responsible disposal of the packaging

The packaging of your TV has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please ensure they are offered for recycling rather than throwing these materials away.

Responsible disposal of the TV

At the end of its working life, do not throw this TV out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Contact your local authority for your nearest recycling centre. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could potentially be hazardous to the environment and human health.

Climate

If moving the apparatus from one location to another, for example from a cold environment to a warm one. Allow sufficient time for the apparatus to acclimatise to the new location before switching on.

In tropical climates keep the air surrounding the unit sufficently dry to avoid condensation forming.

8



40” Full High Definition LED LCD TV

Warranty Details

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. www.tempo.org


9

AUS 1300 886 649

Remote Control

1 POWER: Set the TV to standby mode; press it again to turn the TV on.

2 GOTO: Jump to a different chapter of the DVD.

3 ANGLE : View DVD playback from different angles, if the DVD has this feature.

4 REPEAT : Repeat a different chapter/ title or the entire DVD.

5 FAV: Press to display your favourite program in DTV mode.

6 TEXT : Switch between TV and Teletext mode.

*

7 SUBTITLE: Enable/disable subtitles.

8 SIZE / ZOOM: Change the picture size.

9 MEDIA: Select USB mode.

10 : PLAY/PAUSE in TIMESHIFT and

USB mode.

11 RECORD: Record program in DTV mode.

D-SETUP: Display the main disc menu.

12 : Stop playing.

13 MENU: Display the main TV menu.

14 / / / : Press the UP/DOWN/

RIGHT/LEFT buttons to navigate the on-screen menus and adjust the system settings to your preference.

Press OK to confirm your selection.

15 SOURCE: Switch the input source.

16 VOL +/: Turn the volume up/down.

17 NUMBER BUTTONS (0-9) : Press to select a TV channel directly when watching TV. The channel changes after 2 seconds.

18 -/--: Switch the digits.

19 LANG/AUDIO: Switch the available sound-track language (DTV/DVD).

20 PMODE: Cycle through the different picture modes.

NOTE: DVD-related functions are ineffective for this model.

10

AUS 1300 886 649

POWER TV/RADIO

EJECT

GOTO ANGLE REPEAT A-B

FAV

SUBTITLE

TEXT HOLD

FREEZE

SIZE

ZOOM

ASPECT

SLEEP

SUBPAGE

MEDIA

D.SETUP

REC

INDEX

MENU

TITLE

EXIT

OK

SOURCE

MUTE

+

VOL DISPLAY

+

CH

D.MENU

EPG

1

4

7

AUDIO

LANG

2

5

8

0

P-MODE S-MODE

3

6

9 www.tempo.org


1

11

Remote Control (Cont.)

POWER TV/RADIO

EJECT

GOTO ANGLE REPEAT A-B

FAV

SUBTITLE

TEXT HOLD

FREEZE

SIZE

ZOOM

ASPECT

SLEEP

SUBPAGE

MEDIA

D.SETUP

REC

MENU

SOURCE

1

4

7

+

VOL

AUDIO

LANG

OK

MUTE

DISPLAY

2

5

8

0

P-MODE

INDEX

3

6

9

+

CH

TITLE

EXIT

D.MENU

EPG

S-MODE

21 S.MODE: Cycle through the different sound modes.

22 : Return to the previous channel.

23 DISPLAY: Display information of the current program.

24 CH+/-: Press to play the next or previous channel; press repeatedly to scan through the channels.

25 MUTE : Mute the sound. Press again or press V+ to restore the sound.

26 EPG: Launch the Electronic Program

Guide (DTV).

D.MENU: Display the main disc menu.

27 OK : Confirm selection.

Press to display the channels list (DTV).

28 EXIT: Exit from the main TV menu displayed on the screen.

29

TITLE: Display the DVD title menu.

: Play the previous file.

30 : Play next file.

INDEX: Display the recorded programs list (DTV).

31 : Move fast backward.

32 : Move fast forward.

33 ASPECT: Press to zoom in and out of the picture.

34 SUBPAGE: Manually jump to the previous or next subpage of Teletext.*

35 FREEZE: Hold the picture.

36 SLEEP : Set the TV sleep timer.

37 A-B: Repeat selected DVD scenes.

38 TV/RADIO: Switch between TV or radio.

EJECT : Open or close the disc compartment (DVD).

NOTE: DVD-related functions are ineffective for this model.

* Teletext or Austext is no longer available. However, one teletext option, “closed captions”, is still working on most Australian television channels. This service allows you to activate subtitles for television programs that provide them.



11


Using the Remote Control

Inserting Batteries

Install the batteries as illustrated in Fig. 1, right.

• Open the cover at the back of the remote control unit completely.

• Insert two AAA size batteries according to the polarity markings (+ / -) inside the compartment. Make sure the batteries are correctly aligned and properly pushed into place so they can power the remote control unit.

• Slide the cover back into position.

NOTE: When testing the remote control unit after replacing the batteries, make sure the TV is properly connected to the mains power supply.

Battery Service Life

• The service life of batteries depends on usage and environmental conditions. They should normally last for about one year.

• If the remote control fails to work even when it is operated near the TV, replace the batteries.

Push

Open

Press

Precautions When Using Batteries

• Do not use old and new batteries together.

• Do not use different types of batteries (for example, Manganese and

Alkaline batteries) together.

• Note that there are chargeable and non-chargeable batteries. Do not attempt to charge non-chargeable batteries.

• Remove the batteries from the remote control unit if you do not intend to use the unit for a long time.

• When discarding used batteries, follow any guidelines for recycling and disposal of batteries that apply in your local area.

• Keep batteries away from children and pets.

• Never throw batteries into a fire or expose them to fire or other sources of extreme heat.

12




Using the Remote Control

To use the remote control, point it towards the remote sensor at the front of the television.

The remote control has a range of up to approximately six metres (6m) from the TV at an angle of up to 30 degrees each to the right and left of the sensor, as illustrated on the right.

The remote control will not operate if its path is blocked.

NOTES:

• Do not drop, step on or otherwise impact the remote control. This may damage the parts or lead to malfunction.

• The operating distance may vary according to the brightness of the room.

• Do not point bright lights at the remote control sensor.

• Do not place objects between the remote control and the remote control sensor.

• Do not use this remote control while simultaneously operating a remote control of other devices.

Remote Control

POWER

GOTO ANGLE REPEAT

TV/RADIO

EJECT

A-B

FAV TEXT

SUBTITLE SIZE

ZOOM

MEDIA

HOLD

FREEZE

ASPECT

SLEEP

SUBPAGE

D.SETUP

REC

INDEX

MENU

TITLE

EXIT

OK

SOURCE

MUTE

+

VOL DISPLAY

+

CH

D.MENU

EPG

1

4

7

AUDIO

LANG

2

5

8

0

P-MODE S-MODE

3

6

9



13

Installation

Your TV is packaged with the stand and the cabinet separated. Before using the TV, install the stand as described below, or if you want to mount it to a wall, see the next page for instructions (the wall mount itself is not supplied).

IMPORTANT!

• Make sure the TV set is unplugged from the power supply before installing or removing the stand.

• The TV panel may be awkward to install on your own. We recommend you ask someone to help with installation and/or removal of the stand.

Attaching the Stand

Step 1

Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated on the right (1).

Step 2

Match and align the ‘L’ and ‘R’ markings on the stand legs to their installation points, as illustrated on the right (2).

Step 3

Tighten the screws (supplied) with a screwdriver to affix the stand to the panel, as illustrated on the right (3).

CAUTION! Do not apply excessive force as this may damage the screw holes.

R L

IMPORTANT!

It is highly recommended that you install Safety Straps to prevent your TV from falling over. This is particularly important if young children have access to the TV. Safety Straps can be purchased separately from most electronic or hardware retailers.

Please follow the instructions provided with the Safety Straps for correct installation.

14



Installation (Cont.)

Wall-Mounting Instructions

IMPORTANT!

• Make sure the TV set is unplugged from the power supply before wallmounting it and removing the stand.

• We recommend you contact a professional for assistance when wallmounting the TV. We assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own.

• The TV set is equipped with holes on the back panel for use with wallmounting brackets (not included). Please use the illustration below as a reference when buying wall-mounting brackets.

• Use four standard M6*10mm screws (or longer, depending on the mounting bracket) to mount this TV.

Back of the TV

NOTE: The screws in the package are for securing the TV stand only. If you are wall-mounting the TV, please consult a qualified installer for further instructions on bracket support and wall support.



15

Controls and Connections

Front View Side View

SOURCE

2

1

1. Display Screen

2. IR (infra-red) sensor for remote control

Power indicator: In standby mode the indicator light is red; when switching on the unit the indicator light will illuminate blue.

3. SOURCE: Select the input source.

4. MENU: Enter the Settings menu.

5. VOL +/- : Increase/decrease the volume level.

6. CH +/- : Select the next/previous channel.

7. STANDBY: Switch the TV between Standby and On.

NOTE: See the next page for a detailed description of all sockets on the back panel.

16



Controls and Connections (Cont.)

Main Unit Back View Controls and Sockets

11

10

9

8

1 2 3 4 5 6 7 8

1 POWER CORD

2 HEADPHONES OUTPUT

3 YPbPr INPUT (COMPONENT): Supports both SD and HD (High Definition) picture quality.

4 PC AUDIO INPUT

5 PC (VGA) INPUT: Connect to a PC or other device with a VGA interface.

6 OPTICAL AUDIO OUTPUT: Connect to an external digital audio device.

7 ANTENNA INPUT: For connection of the external antenna.

8 HDMI INPUT: Provides an all digital video/audio connection between the TV and any HDMI device, such as a DVD player, gaming console or A/V receiver.

9 USB INPUT: Connect a USB storage device for PVR recording and multimedia file playback.

10 VIDEO INPUT (COMPOSITE) : Supports Standard Definition (SD) picture quality connections.

11 AUDIO R/L INPUT: Shared between Composite and Component video.



17


IMPORTANT!

• Ensure all cables are disconnected from the main unit before connecting the

TV to an AC power source.

• Read through the instructions before connecting the TV to other equipment.

• Terminals are HAZARDOUS LIVE and the external wiring connected to these terminals requires installation by an INSTRUCTED PERSON or the use of ready-made leads or cords.

Connecting to an AC Power Source

Main Unit

To Power Outlet

Connecting an External Antenna

For best picture quality, we recommend connecting the TV set to an external antenna.

Antenna

18

Power plug of antenna amplifier

Indoor antenna amplifier

AUS 1300 886 649

Outdoor antenna amplifier

75 Ω antenna plug www.tempo.org



Composite Video (CVBS) Connection

AV Cable

(included)

For basic connection, use the composite Audio L/R (white/red) and

CVBS (yellow) cable to connect the unit with other devices.

USB Connection

Insert a USB memory device into the USB port for PVR recording, time-shifting and playback of video/music/photo multimedia files.

AUS 1300 886 649

USB Device

(not included) www.tempo.org


19


HDMI Connection

HDMI Cable

(not included)

Use HDMI cable to connect the unit with other devices to receive high-definition multimedia signal.

PC/VGA Connection

2.5mm Audio Cable

(not included)

VGA Cable

(not included)

20




Optical Connection

(ARC)

Use an optical cable to connect the unit with an amplifier or other audio decoding device for optical audio signal output.

(Optical cable is not included).

Component (YPbPr) Connection

YPbPr Cable

(not included)

Audio Cable

(not included)

R L Y Pb Pr



21


Earphone Connection

EARPHONE Cable

(not included)

22



Getting Started

IMPORTANT!

Make sure all relevant equipment is properly connected (as illustrated on the previous pages) before connecting the unit to a wall socket and turning on the power.

Powering the TV

To turn the power on or off:

• Plug the power cord into a suitable power point, then turn on the power at the outlet.

• Press the POWER button, on the right lower side of the back panel (or on the remote control, making sure to aim it at the sensor at the front of the TV); the indicator will glow blue. Press it again to power off (standby mode); the indicator will glow red.

First Use

When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as illustrated below.

• OSD language: Use the / buttons to select your OSD language and

then use the button to go to the next item.

• Country: Use the / buttons to select the country you are living in and

then use the button to go to the next item.

• Auto scan: Use the / buttons to select the type of scan (ATV, DTV, DTV

+ ATV) and then use the button to go to the next item.

• Press the OK button to begin scanning for stations.

• To exit channel tuning, press the EXIT button and use the / buttons to

select YES; select NO to continue tuning.

• When auto searching is complete, your TV will show the first channel

found.



23

Basic Operations

Selecting an Input Source

• Press the SOURCE button at the right lower side of the back panel, or on the remote control, to display the input source list.

• Press the / buttons to select the desired input source, and then press OK to confirm your selection from the following options: DTV, ATV, AV, YPbPr,

HDMI 1/2/3, PC, USB.

NOTE: When you switch on this TV for the first time, you need to select the language and the country to auto-search for all the DTV programs in your area. See the next page for instructions.

Channel Selection

• Press the CH+/- button to select the next/previous channel.

• Alternatively, press the number buttons to select a channel directly (press the

-/-- button repeatedly to select the first or second digit).

Volume Control

• Press the VOL+/- button to adjust the volume level.

• Press the MUTE button to mute the sound, press it again to restore sound.

Picture and Sound Mode

• Press the P-MODE button on the remote control repeatedly to select the picture mode directly (available options: Standard, Mild, Personal, Dynamic).

• Press the S-MODE button on remote control repeatedly to select the sound mode directly (available options: Standard, Music, Personal, Movie).

Sleep Time Setting

• Press the SLEEP button on the remote control repeatedly to select the desired sleep time directly (available options: Off, 5min, 15min, 30min, 60min,

90min, 120min, 240min).

Video and Audio Settings

• Press the ASPECT button repeatedly to select the desired video size directly from the following options: Auto, 4:3, Just Scan, 16:10, Zoom1, Zoom2.

(Available sizes may vary for different input sources.)

NOTE: If there is no signal, pressing this button will be ineffective and the available video size may be different for different input sources.

• Press the AUDIO button repeatedly to select the desired audio language.

NOTE: The channel you are watching must support multi-audio languages.

24



Basic Operations (Cont.)

Information Display

Press the DISPLAY button to display information about the current program.

Favourites List

• While viewing a channel, press the FAV button on the remote control to enter the

Favourites List menu.

• Press the / to select the favourite category and / buttons to select the channel and press the OK button to watch it.

• To add a channel to Favourites list:

• Navigate to Menu > Channel > Favourite

Manager and click OK .

• Press the / / / buttons to add channels to favourite category

1/2/3/4 respectively.

• Press the EXIT button to save the changes and exit.

Quick Select

• While viewing a channel, press the OK button to enter the Channels List directly.

Press the / buttons to select the channel and press the OK button to view.

TV/Radio (for DTV mode only)

• Press the TV/RADIO button on the remote control to switch the unit between TV and radio mode.

Subtitle

• Press the SUBTITLE button on the remote control to enter the Subtitle menu.

NOTE: The channel you are watching must support multi-subtitles.

Freeze

During normal live TV or PVR playback, press the FREEZE button on the remote control to temporarily freeze the picture. Press it again to resume normal playback. NOTE : A USB drive is not required for this function.



25

Electronic Program Guide (EPG)

EPG TV Guide (for DTV mode only)

• EPG stands for Electronic Program Guide. It is supplied by the program providers and offers information about programs being broadcast. Press the

EPG button on the remote control to view the EPG.

• Press the EPG button to display the EPG interface (above). The top area will display information about the selected program or channel, and the columns below will display the list of available channels and their programs at various time slots.

• Before you can view any EPG information, you have to ‘activate’ every channel for which you want to view program information. Use the / buttons to select a channel, then press the OK button to confirm.

/

/

RED

REC

OK

EXIT

GREEN

YELLOW

BLUE

Switch between columns.

Select a different channel/program in the list.

Display the TV guide of the previous day.

Display the TV guide of the next day.

Enter the schedule list page.

Schedule a reminder for the selected program.

Schedule a recording for the selected program.

Display full program information.

Exit the EPG menu.

26



Recording

One-Touch Recording (in DTV mode only)

IMPORTANT!

Before you can record with this TV set (including time-shift recording), you must have inserted a FAT32 formatted USB storage device into the USB port.

First, insert your USB memory device into the USB port.

When Watching a Program in DTV Mode:

• Press the REC button on the remote control to start recording directly. Press it again to display information about the current recording.

• Press the STOP button to display a dialogue box: select Yes to stop recording, select No to dismiss the dialogue box.

• When a program is being recorded in the background (while the TV is in standby mode), the LED light will flash blue and red.

To Watch a Recorded Program:

• Press the INDEX button on the remote control to display the PVR Settings page. (Alternatively, go to the Setup Menu and select PVR Settings.)

• Highlight File Manager and press the OK button to enter it (see page 43).

• Use the / buttons to select a recorded file and press the OK button to start playback in full screen mode.

Scheduled Recording (in DTV mode only)

• See instructions under EPG on the previous page or press the INDEX button, select Schedule Recording and follow the instructions on page 44.



27

Recording (Cont.)

Time-Shift Recording and Playback (in DTV mode only)

IMPORTANT!

Before you can record with this TV set (including time-shift recording), you must have inserted a FAT32 formatted USB storage device into the USB port.

The Time-Shift function allows you to pause the live TV signal, then resume playback at your convenience.

• First, insert your USB memory device into the USB port.

When Watching a Program in DTV Mode:

• Press the button on the remote control to initiate Time-Shift mode and pause the program.

• Press the button again to resume playback; the tool bar pictured below will appear on the screen.

• Use the / buttons to select Play, then and press the OK button to play the program in time-shift mode.

• Use the / buttons, then press the OK button to select a function such as Fast Forward from the on-screen toolbar.

• To stop time-shift, press the STOP button on the remote control to display a dialogue box, then select Yes to exit time-shift mode and return to live TV signal, or select No to dismiss the dialogue box.

NOTE: The USB storage device will not retain recorded data after exiting the time-shift function.

28



Recording (Cont.)

Important Notes

When using the USB/Media function, remember the following important points:

• We strongly recommend you back up all data in the USB storage device to another storage device so you do not risk losing any data in case of an unexpected device failure or accident. We do not assume liability for any loss of data due to misuse or malfunction. Data backup is your personal responsibility.

• You cannot change to a channel from another broadcaster or select another function while in recording mode.

• If the signal is interrupted or removed while in recording mode, the recording will stop until the signal is established. This may cause you to lose program content.

• Do not turn the TV off during recording, otherwise the TV will exit the time-shift function and turn to standby mode.

• The file recorded can only be used in this TV. Do not copy it to any other device.

• When you are in time-shift recording mode, you may experience some difficulty with a scheduled recording at different times without removing the USB recording device. You will need to remove the USB device as it is required to reset after each recording to protect the device from damage.

If you see the message ‘DISK NOT READY’ displayed, remove the device, reconnect and proceed with your recording.

• Some USB storage devices may not be compatible for smooth operation with this TV.

• For large file sizes and large capacity storage devices, the loading speed may be longer. The recognition speed of a USB storage device may vary depending on the device.

• When connecting or disconnecting the USB storage device, ensure the TV is not in USB mode, otherwise the USB device or the files stored in it may be damaged.

• Only use a USB storage device formatted in a FAT32 file system provided with the Windows operating system. If it is formatted by a different utility program that is not supported by Windows, it may not be recognised.

• Ensure any USB devices connected to the TV do not use/exceed 500mA power rating.

• If an “Unsupported File” message is displayed, the file format or codec is unsupported or corrupted.



29

USB Mode

Media Playback

• First, insert a USB memory device into the USB port.

• Press the SOURCE button on the back panel, or on the remote control, to switch the unit to USB mode. (Alternatively, press the MEDIA button on the remote control to enter USB mode directly.)

• Press the / / / buttons to move the cursor.

• Press the EXIT button to return to the previous menu page.

Photo

• Press the / buttons to select Photo in the main menu, then press OK to enter it. Photo files can only be played in this menu category.

• Use the / / / buttons to select the desired folder or file, then press

OK to open the folder or start playing the file.

When Playing Photo Files:

• Press the DISPLAY button on the remote control to hide/display the on-screen tool bar.

• Press the OK button repeatedly to switch between Slide Show and Single

View.

• Press the / buttons to play the previous/next file.

• Press the / buttons to rotate a photo clockwise/counterclockwise.

NOTE: You can rotate a photo only when slide show is paused.

• Press the BLUE button on the remote to display the Quick Menu, press it again to dismiss the menu.

• Interval Time: Set the slide show interval time.

• Repeat: Select the repeat mode.

• Slide Show Effect: Select the slide show effect.

• Background Music: Turn On/Off background music.

30



USB Mode (Cont.)

Music

• Press the / buttons to select Music in the main menu, then press the

OK button to enter it. Music files can only be played in this menu category.

• Use the / / / buttons to select the desired folder or file, then press the OK button to open the folder or start playing the file.

When Playing Music Files:

• Press the CH+/ button on the remote control to switch between Player and

File List.

• Press the BLUE button on the remote control to display the Quick Menu, press it again to dismiss the menu.

Repeat: Select the repeat mode.

Background Music: Turn On/Off background music.



31

USB Mode (Cont.)

Movie

• Press the / buttons to select Movie in the menu, then press the OK button to enter. Movie files can only be played in this menu category.

• Use the / / / buttons to select the folder or file, then press the OK button to open the folder or start playing the file.

W hen Playing Movie Files:

• Press the DISPLAY button on the remote control to hide/display the tool bar.

• Press the / buttons to select the preferred option, then press the OK button to confirm.

Text

• Press the / buttons to select Text in the main menu, then press the OK button to enter.

• Use the / / / buttons to select the folder or file, then press the OK button to open the folder or start playing the file.

When Playing Text Files:

• Press the / buttons to display the previous/next page.

• Input your desired page using the number buttons, then press the OK button to go to the desired page.

• Press the BLUE button on the remote to display the Quick Menu, press it again to dismiss the menu.

• Repeat: Select the repeat mode.

• Background Music: Turn On/Off background music.

• Encode Type: Select the encode type.

Remote Operations When Playing Multimedia Files:

• Press the button to play or pause playback.

• Press the button to stop playback.

• Press the button to move fast backward.

• Press the button to move fast forward.

• Press the button to play the previous file.

• Press the button to play the next file.

NOTE: To play your multimedia files, make sure you have selected the correct icon in the main media playback menu.

32



Menus

This TV set contains different settings menus where you can program your preferred settings. Once you have programmed any settings, the unit will retain them in its memory until you change them, even when switching the unit to standby mode. This means you can always operate the system under the same conditions.

Menu Navigation

• Press the MENU button on the back panel, or on the remote control, to display the main menu.

• Press the / buttons to select different submenus.

• Press the OK or button to enter the submenu page.

• Press the / buttons to select the preferred option.

• Press the / buttons to adjust the value.

• Press the MENU button to return to the previous menu page.

• Press the EXIT button to exit the menu page.

There are menus for television operation in DTV and ATV mode (pages 36-37), for PC mode (page 45).

• Press the SOURCE button on the back panel, or on the remote control, to display the input source list.

• Press the / buttons to select the desired input source from the options available.

NOTE: When you switch on this TV for the first time, you need to select the language and the country to auto-search for all the available channels in your area. See page 23 for first time installation instructions.



33

Menus (Cont.)

Picture Menu (DTV & ATV mode)

Picture Mode: Available options:

Standard, Mild, Personal, Dynamic.

Brightness / Contrast /

Sharpness /

Saturation: These values can be adjusted from 0-100.

NOTE: When these values are adjusted, picture mode will automatically switch to Personal.

Hue : Use this item to adjust the colour tone (for NTSC system only) from

-50 to 50.

Color Temp: Use this item to adjust the optimum colour temperature for suitable viewing.

Available options: Normal, Cool, Warm.

Aspect Ratio : Use this item to adjust the video size. Available options:

Auto, 4:3, Just scan, 16:10, Zoom1, Zoom2.

NOTE: If there is no signal, pressing the ASPECT button on the remote control will not work. The available video size may be different in different input sources.

Screen Mode (HDMI mode only)

The item is used to adjust the screen mode in HDMI mode.

Available options: Auto, Video, PC.

Advanced Settings:

NR (Noise Reduction):

Available options:

Off, Weak, Medium, Strong.

MPEG NR (MPEG Noise

Reduction):

Available options: Off, Weak,

Medium, Strong.

Dynamic Contrast:

Available options: Off, Weak,

Medium, Strong.

34



Menus (Cont.)

Sound Menu (DTV & ATV mode)

Sound Mode: Available options: Standard, Music, Personal, Movie.

Treble / Bas s: Use these items to adjust the levels of higher-pitched sounds

(Treble) and lower-pitched sounds (Bass) from -50 to 50.

NOTE : When the Treble or Bass values are changed, sound mode will automatically switch to Personal.

Balance: Us e this item to adjust the audio output between the left and right speaker from -50 to 50.

Sound Delay: Adjust this item if the sound and picture are not synchronized.

Surround S ound: Use this item to turn on/ off Surround Sound simulation.

EQ Setting: Use this item to set the equalizer. Available EQ Modes:

Off, Rock, Pop, Jazz, User.

AVL (Auto V olume Level): Use this item to turn On/Off AVL.

S/PDIF: Use this item to select the SPDIF audio output type.

Available options: Off, Auto,

PCM.

AD (Audio D escription): Press the OK button (or the button) to enter this item. Then you can set the AD switch to ON or OFF.

NOTE: Audio description for visual representation works only with programs that contain related narration information (for people with visual impairments).

Sound Type : Use this item to select the desired sound Type.

Available options: Stereo, Dual I, Dual II, Mixed.



35

Menus (Cont.)

Channel Menu (DTV & ATV mode)

Auto Scan

• Press the OK or button to enter. Then select your country, scan type and start scanning.

Manual Scan

• Press the OK or button to enter. Then select digital or analog manual scan.

Digital Manual Scan

• Press the OK or button to enter.

Digital Scan: Press the / buttons to select the channel.

Start: Start scanning.

Frequency: This is not user adjustable.

Strength: This displays the signal strength of the current channel. It is not user adjustable.

Analog Manual Scan


Analog Scan: Press the / buttons to fine tune.

Channel to Save: Select the channel number to be saved.

Colour System: Select the colour system (PAL in

Australia).

Sound System: Select the sound system.

AFC: Turn On/Off automatic fine tuning.

Start: Start scanning.

NOTE: Colour System, Sound System and AFC can only be adjusted if there is a signal.

36



Menus (Cont.)

Channel Edit


• Press the / buttons to highlight the desired channel.

• Press the RED button on the remote control to delete the highlighted channel.

• Press the GREEN button on the remote control to skip the highlighted channel.

• Select the channel you wish to move.

Press the BLUE button on the remote control to enter Move mode.

Use the / buttons to select the preferred position, then press the

BLUE button again to move the channel.

Favourite Manager

• Select Favorite Manager and press the

OK button to enter.

• Press the / button to highlight the desired channel.

• Press the / / / buttons on the remote control to add the channel to favourite category 1/2/3/4 respectively.

Signal Information

This item is used to display signal details, such as Channel Number,

Frequency, Quality and Strength.



37

Menus (Cont.)

Lock Menu (DTV & ATV mode)

• Press the OK or button to enter the Lock menu.

• Input the factory default password “0000” using the number buttons on the remote control.

• Press the / buttons to select the preferred item.

NOTE: If you forget the password, use the master password “4711”.

Enable

• Use this item to enable/disable the lock system.

Channel Locks


• Press the / buttons to select the channel you want to lock.

• Press the OK button repeatedly to lock/unlock the highlighted channel.

Parental Rating

• Use this item to select the desired program rating. Available options:

No Block, Block G+, Block PG+, Block M+, Block MA+, Block AV+,

Block R+ and Block All.

Lock Keyboard

• Use this item to turn On/Off the key lock on this unit.

38



Menus (Cont.)

Hotel Mode

• Press the

• Press the

OK or button to enter.

/ buttons to select the desired item.

• Press the / buttons to adjust the value.

• Press the OK or button to enter the submenu.

• Press the MENU button to return to the previous page.

Active Hotel Mode: Turn On/Off

Hotel Mode.

Max Vol: Set the maximum volume level.

Default Vol: Set the default volume level.

Source Lock: Turn On/Off the lock on available sources.

Default Source: Set the default source.

Default DTV Program: Set the default digital program.

Default ATV Program: Set the default analog program.

Backup to USB: Backup the data to USB memory device.

Restore from USB: Restore data from USB memory device and then your

TV will switch to STANDBY mode.

Recall: Recall the default settings of Hotel Mode.

New Password

• Input your new password using the number buttons on the remote control and confirm it again to set your private password.

Clear Lock

• Use this item to clear your current lock settings.



39

Menus (Cont.)

Settings Menu (DTV & ATV mode)

OSD Language

• Use this item to select the desired on-screen display language.

Audio Languages

• Press the OK or button to enter. Then you can select the desired primary and secondary audio language (only adjustable if there is a signal).

Subtitle

• Press the OK or button to enter. Then you can select the desired primary and secondary subtitle language and turn on/off the Hearing Impaired function when this mode is on (only adjustable if there is a signal).

Teletext

• Press the OK or button to enter. Then you can select the desired digital

Teletext language and decoding page language. (See the note on page iii for more information about Teletext in Australia.)

Blue Screen

• Turn On/Off blue screen.

Time Settings

• Press the

• Press the

OK or button to enter.

/ button to select the desired item.

• Press the / button to adjust the value.

OSD Time: This item is used to select desired OSD menu duration.

Available options: Off, 10/20/30/60 seconds.

Sleep Timer: This item is used to adjust the Sleep Timer.

Available options: Off, 5/15/30/60/90/120/240 minutes.

40



Menus (Cont.)

Auto Sleep: This item is used to select desired Auto Sleep (standby) duration. Available options: Off, 3/4/5 hours.

Time Zone: This item is used to select your desired time zone.

Time: Press

Press the the OK or button to enter it.

/ button to select the desired item.

Press the / button to adjust the value.

Auto Sync: Synchronise the time with your channel if Auto Sync is on.

When Auto Sync is off, you can adjust the Date and Time manually.

To Adjust the Date and (or) Time:

• Highlight the date and (or) time and press the OK button to enter the adjusting page.

• Press the

• Press the OK button to confirm the setting; press the EXIT button to cancel it.

/ button to adjust it.

HDMI CEC Control

• To use the HDMI CEC function, make sure the HDMI device (amplifier, etc.) is connected correctly.

• Press the SOURCE button on the unit or remote control to select HDMI input source.



41

Menus (Cont.)

HDMI CEC Control: This item is used to turn On/Off HDMI CEC (Consumer

Electronic Control).

ARC: This item is used to turn On/Off Audio Return Channel. When ARC is on, the TV can return the audio to the connected HDMI device (amplifier, etc.).

CEC Menu Control: Press the OK or button to enter it.

• Home Menu: Display the Home menu of the connected CEC device.

• Option: Display the Option menu of the connected CEC device.

• Content: Display the Content menu of the connected CEC device.

Device List: This item is used to display the available device that connected.

42



Menus (Cont.)

PVR Settings

File Manager

• Press the / buttons to select a recorded file.

• Press the RED button on the remote control to play the highlighted file from the beginning.

• Press the GREEN button to delete the highlighted file.

• Press the YELLOW button to delete all recorded files.

• Press the BLUE button to zoom in or out.

Device List

• In this item you can check the available space and file system of your memory device connected to USB port.

• Press the RED button on the remote control to format your USB memory device.



43

Menus (Cont.)

Scheduled Record

• Press the GREEN button to delete the highlighted option.

• Press the YELLOW button to delete all.

• Press the / buttons to select a schedule.

• Press the OK button to edit the highlighted Scheduled Recording.

Frequency: Press the / buttons to select the desired mode: Off, Once,

Daily, Weekly, Weekday.

Channel: Press the / buttons to select the desired channel.

Start Time: Press the / / / buttons to select the desired start date and time of the recording.

End Time: Press the / / / buttons to select desired end date and time of your scheduled recording.

NOTE: Once finished, select Save to save the settings.

First Time Setup

This item is used to recall the First Time Setup page (see page 23 for details).

Shipping Condition

This item is used to reset this TV to shipping condition.

Reset

This item is used to reset to factory default settings.

Software Update (USB)

This item is used to update software through a USB memory device.

44



Menus (Cont.)

PC Mode

• Connect a personal computer to this unit via a VGA cable and power on both the computer and this unit.

• Press the SOURCE button on the back panel, or on the remote control, to select PC input source.

• Press the MENU button to display the main menu, then select Picture using the / buttons.

• Use the / buttons to highlight PC Setting, then press the OK or button to enter.

• Press the / buttons to select the preferred item.

• Press the OK or button to enter the submenu, press the / buttons to adjust the value.

Auto Adjust

Use this item to adjust the PC screen automatically.

H Position

Use this item to adjust the horizontal position value from -30 to 30.

V Position

Use this item to adjust the vertical position value from -30 to 30.

Phase

Use this item to adjust the phase value from 0 to 31.

Clock

Use this item to adjust the signal transfer speed from -30 to +30.

NOTE: For other menu operations in PC mode, please refer to the menu operations of DTV mode.

NOTE: A signal must be connected in order to change these settings.



45

FAQs

If you experience any problems with your TV, check the list below and take any necessary steps before calling for service. If none of the solutions help you solve the problem, please contact After Sales Support for advice.

General problems with the TV set

Problem Solution

No power.

Insert the power plug securely into the power outlet.

No picture.

No sound or distorted sound.

No operations can be performed with the remote control unit.

Ensure that the equipment is connected properly.

• Adjust the antenna or use an external antenna.

• Relocate the unit near a window (if inside a building).

• Move the TV set away from any product that causes interference.

• Auto-tune the unit again.

• Try another channel.

• Ensure that the equipment is connected properly.

• Ensure that the input setting for the TV is correct.

• Ensure the audio settings are properly set.

• Ensure the volume is not muted. If it is, press the MUTE button to restore the sound.

• If earphones are connected, unplug them.

• Adjust the volume to a suitable level by pressing the VOL+/VOL- button.

• Check the batteries are correctly installed.

• The batteries may be exhausted: replace them.

• Make sure to point the remote control at the remote control sensor and try it again.

• Make sure to use the remote control at a distance of no more than 6m from the sensor.

• Remove any obstacles between the remote control and remote control sensor.

46



FAQs (Cont.)

Problem

No key operation

(by the main unit and/or the remote control) is effective.

Noise or other interface

Solution

Disconnect the power plug and then reconnect it. (The unit may not be operating properly due to lightning, static electricity or some other factors.)

Electronic equipment near the unit is causing interface. Relocate the unit or move the equipment.

Problems relating to the USB device

Problem

My TV does not recognise my

USB device or my external hard disk.

Solution

First refer to the instructions describing how to use

USB devices with this unit.

If the problem still occurs, your device may not be compatible. This machine has been tested with the majority of Flash memory-based devices and hard disks (Music/Movie players with HDD) on the market; however, it may not be compatible with certain devices, in particular external self-powered hard disks.



47

Specifications

Display Device

Resolution

Display Colours

40” (101.6cm) Full HD LED LCD TV

1920 x 1080

16.7M

Contrast Ratio

Aspect Ratio

1200:1

16 : 9

Movie AVI, MPEG, MPEG-4, TS, MKV

Multimedia Playback

Format under

USB Mode

Music

Photo

MP3, WAV, AAC

JPG/JPEG

USB Output

Power Source

Text TXT

2 x 5V DC, 500mA

100-240V~ 50/60Hz

Power Consumption 65W

Dimensions

With stand: 928.5 x 227.1 x 596.3mm ( w x d x h)

Without stand: 928.5 x 82.5 x 551.1mm ( w x d x h)

Net (With stand): 6.7kg

Weight Net (Without stand): 6.5kg

Gross: 8.9kg

Version number

Date

1.0

06/2018

48



40” Full High Definition LED LCD TV

Repair and Refurbished

Goods or Parts Notice

Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair.

Please be aware that if your product is capable of retaining user-generated data

(such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 886 649 or write to us at:

Tempo (Aust) Pty Ltd ABN 70 106 100 252

PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086

Tempo Help Desk: 1300 886 649 (Aust)

(Operating Hours: Mon-Fri 08:30AM to 06:00PM EST)

Email: [email protected]

www.tempo.org


49

AUS 1300 886 649

50

This page has been left blank intentionally.



AUS 1300 886 649

This page has been left blank intentionally.

www.tempo.org


51

!

Warranty returns

Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.

Product does not work?

If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on 1300 886 649 before returning it to the store for a refund.

www.tempo.org


No results