BeeX D2 User Manual

D2

English

1.

Announcements

Please keep the device away from moist and dust.

Do not put the device in high-temperature environment, especially closed car in hot weather.

Do not drop or strike the device.

Do not shake the device violently, especially the LCD Screen part. Or, it will cause abnormal display on the screen.

Please choose proper volume when using the earphone which will be good for your ear.

Please charge the device when

(1) The power icon shows lowest power.

(2) The device is turned off automatically, and when you turn on it, it is turned off automatically again.

(3) No response when operating the buttons.

Attention: Please use the charger offered by manufacturer to charge, other chargers may cause damage to the device.

Do not disconnect the device from PC when downloading, uploading or formatting, or it will cause programming errors of the device.

Do not dismounting the device privately without professional guidance.

Do not use alcohol, thinner or benzene-chemical to clean the surface of the device.

Do not use the device in forbidden place, like airplane.

Please backup  your  files  in  device’s  memory  always.  The  manufacturer  is  not  responsible  for   the clear of files after damage or repair of the device.

The manufacture reserves all right of de vice’s   technology   and   design,   and   will   have   no   obligation to inform the user if there are new versions or designs been developed.

2. Announcements

The device is NOT water-proof; please keep it away from water.

The turn on time of this device is about 20 seconds; please  don’t  operate  the  device  when  it  is   turned on in 20 seconds.

3. Quick Guides

3.1

About Touch Panel

The touch screen is capacitive touch screen; you can use five fingers to touch the screen at the same time.

3.2 Switch On/Off.

Switch On and  Unlock:  When  the  device  is  in  the  OFF  mode,  press  and  hold  “Power”  key  for  3   seconds to enter the Android startup progress bar, it need about 20 seconds enter to the system desktop, when the LCD is under locked mode, please press and pull the icon to the green point, then the LCD will unlocked automatically, see the figures below,

3.3 Power Saving Modes and lock screen .

Press  the  “POWER”  key  shortly  after  starting  up,  system  ent er to power save and lock mode.

Press  the  “POWER”  key  or  tap  the  tou ch screen, system will return to bright in 1 second

The primary operation of the device will not stop under the power save mode, just the LCD is shut and with black screen. For example: playing music, movie, etc

Switch OFF: When the device is in the OFF m ode,  press  and  hold  the  “POWER”  key  for  3   seconds, the screen will display the power off interface, choose the power off item to confirm, the system will shut automatically

【 Note 】 When the device with low battery it will alarm continuous and shut automatically without charging. If the device can not start up please check if the battery is low, and try it again after the battery is charged.

3.4 Battery management and charging.

3.4.1

Charge the battery for 8-12 hours to make sure the battery is fully charged when firstly use.

3.4.2

Insert the micro port of the battery adaptor into DC slot on the device, and connect the other side with the power socket. Then the desktop icon of the battery keep rolling which shows it is charging, please wait until the battery i s  fully  charged,  don’t  disconnect  the  power  when  charging.  

Once the battery is fully charged, the Icon on the desktop will stop rolling.

【 Note 】 In order to keep the battery working in the best condition, please pay attention as below:

Please  don’t  charge   the power in high temperature.

No need to release the power for this Li- battery, you can charge the power even there is still some power in the battery, no need to wait it runs out.

In order to keep the battery in good condition, please make sure to charge the power once per two  weeks  if  you  don’t  use  this  device  for  a  long  time.

3.5 USB HOST Function

3.5.1 USB- HOST Definition

The Mini USB on the device can be used as USB Host.

3.5.2 Read U-disk:

Insert the U-disk into the HOST port, press the Resource manager in the desktop, press USB enter into u-disk.

3.5.3 External 3G USB Dongle . (See network access guidance in item 4)

3.6 TF Card Storage

There is a TF card slot in this device, it support reading the files in TF card. Insert the TF card into the card slot in right way, when take it out, just push the TF toward to the inside, then the slot will release the TF card, the TF card will pop out automatically, take it then.

3.6.1

Please insert the TF into the card slot in the right side of the device.

3.6.2 Don’t  pull  out  the  card  when  operating ( reading, copying), or it may cause date error.

3.6.3

Don’t  use  the  TF  card  under  high  temperature  condition.

3.6.4

Keep the TF card far from the liquid and erosive materials.

4. Network Access

The device support Wi-Fi network and external 3G network.

4.1 Network Access by Wi-Fi

4.1.1 Turn on Wi-Fi, and Press Wi-Fi settings. The device will scans automatically for available Wi-Fi networks.

4.1.2 Choose the Wi-Fi network that you want to connect to.

4.1.3

Press Connect . Some network may need you input the password.

4.1.4

On the Wi-Fi settings screen, press the Menu key, touch Advanced, you will get more settings for Wi-Fi.

4.2 Network Access by 3G

4.2.1 Turn OFF Wi-Fi if it is working.

4.2.2

Access Mobile network setting , make sure Data enabled was chosen. Then go back to

Wireless & Networks.

4.2.3

Insert External 3G by USB host.

4.2.4

Choose Mobile network, then wait for the 3G network connection, soon you can access network via 3G..

5. Main Functions Introduction

5.1 Audio Function

Enter the music player: In music player mode, double-click the favorite in the list to play music as shown in the following picture

Drag the playing progress bar

Instructions of the buttons in the Music player

Button Instruction button

， to adjust the playing process.

Instruction

Artist Album

Song Playing Music list

Random Play Loop playback

Play the last song Play the next song

Pause Play

When no music files in the audio player playlist, the system will automatically load the music files from the card to the audio player playlist after turning on the audio player (the device supported audio file format: mp3, wav, midi, wma). The playlist as shown in the above figure

If two more songs in the Music playlist area, slide up/down the touch screen to page up/down

Double-click the favorite in the list to play music.

In the music playing interface, click

Drag the playback progress bar

enter the audio playing list.

to adjust audio playback progress.

5.2 Video Function

Click the Video player icon to enter the video player interface, open the video files,

The device supported audio file format: MKV 、 AVI 、 RM 、 RMVB 、 MP4 、 MOV 、 VOB 、

DAT 、 FLV 、 3GP 、 etc.

When no video files in the video player playlist, the system will automatically load the video files from the card to the video player playlist after turning on video player.

Drag the playback progress bar to adjust video playback progress.

5.3 Picture Function

Click the HD Video Player to enter the viewing interface

Add image （ supports the format of picture: BMP 、 JPG 、 JPEG 、 PNG 、 GIF ）

When there is no file in the photo list, the system will automatically load the image files from the card to the photo browsing list after opening the photo browser.

Open the corresponding folder, find the image file and add the picture you want.

Click menu button, the photo can be set as wallpaper.

5.4 Record Function

Click the record icon to enter the record interface, click record button to start recording, click this button to stop recording, the system will remind you to use this recording or give up, please select manually.

Recording playing: please select audio player to play the recording, firstly select the record files from the explorer, then click it and playing, further details please refer to Audio Function .

5.5 File Manager

In file manager, you can check all files in the device, including files in built-in Memory and external card. Also there is a quick view for pictures and videos.

5.6 E-book Function.

Support formats of E-Book: TXT 、 LRC 、 PDF 、 HTML 、 HTM 、 EPUB, etc.

5.7 Internet Browser

Before you use internet browse function, please make sure your network is connected. See network access guidance in former part.

Click IE Browser icon to enter to the IE interface, click the address bar and input website and click Go to enter a corresponding web page, you can view the corresponding website information.

Click icon to view bookmark and history record.

Click menu icon to access settings

The device also supports other internet browsers, detail functions of those internet browsers refer to their own instructions.

5.8 Email Function

Before you use email function, please make sure your network is connected. See network access guidance in former part.

When you firstly use this function, you need to add an email account to the device. The device supports several accounts working together.

Portal sites email accounts and enterprise email account adding methods are different.

Add portal sites email accounts. ( Example: Gmail, MSN, Yahoo, etc. )

Take Google email account for an example here.

Account: [email protected]

Password: *********

For portal sites email accounts, directly input your email address and password, then click next.

After successful connection, input Account Name and Your Name . Account Name means the name of this account in the device, Your Name means the displayed name of your email in receivers ’ account.

Then you will access the account. Click email titles to read emails, long press email titles to access options.

Click menu icon to access settings

Refresh: Checking new emails.

Compose: Write new emails.

Folders: Manage emails to different folders.

Accounts: View accounts in the device, add new accounts, delete accounts, set main account.

Accounts settings: More options for email account.

5.9Calendar

Click Calendar icon to enter calendar interface.

In calendar mode, press and pull up/down the screen to reduce/increase the Months; or to turn the pages.

Auto adjusts Years when the month exceeds December or January.

Enter interface, the number in the orange form is the intraday date, you can change the date in setting function; details as the setting section. .

Click to return to main menu.

5.10 Calculator Click Calculator icon to enter calculator interface.

5.11 Alarm Clock

Click Clock icon to enter time interface, then click the clock to access alarm interface, and you can add new alarms or edit former alarms now.

Long press former alarms to choose turn alarm on/off, edit alarm, and delete alarm. Click alarms to edit alarm.

You can edit alarms ’ time, repeat mode, ringtone, and lable.

In alarm interface, click menu icon could be set.

to access settings. The following items

5.12 APK Installer

This device supports the third party ’ s Application Package (APK format) based on Android

OS. Many Application Package can be downloaded from internet, or copied from other devices into the storage.

If the Application Package is not downloaded from Google Android Market, you should operate the following steps before installation. Please check Settings – Applications , make sure Unknown sources is chosen.

Click the File Manager icon to install

and Choose the file you want to install APK, press prompted

5.12.1 Install: Click Install, enter into the APK installer interface.

Internal Memory means built-in Flash memory, SD card means inserted T-Flash;

After entering, select the APK format setting program in the right side, click the application to install, back to the main interface when complete this operation, then it finished the installing, and there will be a relevant icon in application list.

5.12.2 Manage: Click settings and Choose APPS

Click the APPS, Choose the file you want to cancel software

Click the software, uninstall the software.

5.12.3 Exit : Go back to the main interface.

Note: All installed applications will be shown in application list menu. Here applications include games, chatting TM, internet browser, media player, system tool, etc.

5.13 CAMERA AND PHOTOGRAPH

This machine is equipment with camera in the front, you can take photograph and record video clips.

Click on the applications tab to display all applications,then click "take photos" or "camera shooting " into the shooting model.

Befor filming,you can click on camera's work environment to have associate setting ,like: white balance, photos size, photo quality, point mode etc.

Click on button to start or end shooting .

The photographs or video can be previewed in the preview window.

If you want play the video you shooted ,turn on the video player and choose which video you want to play.

If you want to see the photograph you taken,turn into the photo model,and choose which pictures you want to see.

6. System Settings

Click setting icon to enter system settings, then you can change wireless & networks, sound, display, location & security, Applications, accounts & sync, Privacy, Storage, language & keyboard, voice input & output, and date & time.

6.1 Wireless & Networks Setting, See item 4.

6.2 Sound Setting. You can adjust Silent mode, Volume, Notification ringtone, Audible selection,

Screen lock sounds, and Haptic feedback.

6.3 Display Setting. You can adjust Brightness, Auto-rotate screen, Animation, Screen timeout.

6.4 Location & Security Setting. In this Setting, you can set up screen lock and device administrators, as well as TF card password.

6.5 Applications Setting. You can manage applications here, and check storage & battery usage.

Notice: If you want to install applications which are not downloaded from Google Android Market, you should turn on Unknown sources in advance.

6.6 Accounts & sync Setting. In this setting, you can manage accounts in the device.

6.7 Privacy Setting. In this setting, you can back up data, and reset factory default.

6.8 Storage Setting. In this setting, you can check storage use and Mount & Erase TF cards.

Notice: Before you fetch out TF Card (if you have inserted TF card), please Unmount TF card first, in case that some applications will arise problems.

6.9 Language & Keyboard Setting. In this setting, you can change the language of system, and choose keyboard inputs.

Notice: If you have installed an input and you want to use it, please remember to turn on it in this setting (All inputs could be turned on here). Long Press the blank where you want to type, there will be popup to choose inputs.

6.10 Date & time Setting. In this setting, you can adjust date and time.

6.11 About device. Check device information.

7. FAQ

1) How can I change languages if I mistakenly choose an unknown language?

· Find setting icon in Menu Page to enter Settings.

· Then, choose icon to enter language & keyboard setting, the first option is language setting.

2) How can I change input when I am typing?

Long Press the blank where you are typing, there will be popup to choose inputs.

3) I already installed some applications, but I can not find them now, why?

· By default, some applications are installed in external TF card, so if you fetched out the TF card from the device, you will not see these applications.

4) The machine can not be turned on.

· Check the battery and charge it if there is no power.

· Connect the machine to AC Adapter.

· Contact the seller if the machine still can not be turned on after charged.

5) There is no voice in the earphone.

· Check if the device is in Mute mode.

· Check the volume setting in case it is 0.

· Check the connection of earphone.

6) Why I can not install applications?

Please check Settings – Applications , make sure Unknown sources is chosen.

7) There is Error Codes on the screen.

· System error, restart the device.

· The language you are browsing is not supported by built-in languages, please contact the original manufacturer to debug.

8) There are problems of system, many popup of error.

Restart the device by POWER button for 10 seconds , the device will restart

If you have restarted the device and error popup still exist, you can check active applications to see if there is any unknown application, uninstall it if any.

There may be virus in the device, please install security applications and protect your device.

If you have problems after above operations, the device ’ s firmware needs rebuilt ( the operation is named “ flash ” ).

Notice: Before you flash the device, please back up your storage, the flashing will make all settings and files turn to factory default . Flashing operation need flashing tool and firmware, please contact original manufacturer for flashing operation.

European Union — electronics and battery disposal information:

The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

DECLARATION OF CONFORMITY

We

Bravophone. Kft located  in  Hungary,  1145  Budapest,  Újvilág  u.  50 -52.

DECLARES that BeeX Tablet have been designed, manufactured and placed on the market in conformity with:

-R&TTE Directive 1999/5/CE

-EC 2004/108EC & 2006/95EC & 2009/125ES

This declaration was issued based on results of test reports which found at Bravophone. Kft. 1145

Budapest,  Újvilág  u.  50 -52

Relevant standards:

EN 301 489-17 V2.2.1 (2012-09), EN 301 489-01 V1.9.2 (2011-09),

EN 301 489-03 V1.4.1 (2002-08), EN 61000-3-2: 2006 + A1+ 2009 +A2:2009,

EN 61000-3-3: 2008, EN 55022: 2010, EN 55024: 2010 (EMC)

EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011, EN 278/2009 ( splinterless )

EN 300 328 V2.8.1 (2012-06), EN 300 440-1 VI.5.1 (2009-03),

EN 300 440-2 VI.3.1 (2009-03), EN 301 908-1 V4.2.1 (2010-03),

EN 301 908-2 V4.2.1 (2010-03) (communications)

EN 62311: 2008, EN 62209-2:2010, 50371: 2002 (SAR)

The products have been represented with CE mark.

Bravophone.  Kft.  1145  Budapest,  Újvilág  u.  50 -52. 2013.10.01