SAFETY AND REGULATORY STATEMENTS
For more product information, please visit: www.avocent.com/manuals to download the user manual.
SAFETY INFORMATION AND INSTRUCTIONS
SAFETY SYMBOLS
One or more of the following symbols may be included in your product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off switch is in the on position.
Power Off: This symbol indicates the principal on/off switch is in the off position.
Protective Grounding Terminal: This symbol indicates a terminal which must be connected to earth ground prior to making any other connections to the equipment.
Lithium-ion Battery: This symbol indicates that the product contains a lithium-ion battery.
SAFETY PRECAUTIONS
WARNING: To avoid potentially fatal shock hazard and possible damage to equipment, please observe the following precautions.
• Do not disable the power grounding plug. The grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
• Disconnect the power from the product by unplugging the power cord from either the electrical outlet or the product. The AC inlet is the main disconnect for removing power to this product. For products that have more than one AC inlet, to remove power completely, all AC line cords must be disconnected.
• Do not connect this product to the Public Switched Telephone
Network (PSTN).
• This product has no serviceable parts inside the product enclosure. Do not open or remove product cover.
CAUTION: Some Avocent products contain a lithium battery. For these products, a symbol indicating a battery will be shown on the product label. This battery is not a field replaceable item, and replacement should not be attempted by a user. If errors occur when using the product and the battery is suspected, contact Avocent Technical
Support.
WARNING: For Service Personnel Only - There is a risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries according to the manufacturer’s instructions.
This product is for use with other products that are Listed or
Certified by a Nationally Recognized Testing Laboratory (NRTL).
RACK MOUNTING SAFETY CONSIDERATIONS
If mounting this product in an equipment rack, the following considerations shall apply for safe installation and use of this product:
• Elevated Ambient Temperature: If installed in a closed rack assembly, the operation temperature of the rack environment may be greater than room ambient. Use care not to exceed the rated maximum operating temperature for this product. The rated maximum operating temperature is specified in the technical specifications section in the complete user’s manual for this product available at http://www.avocent.com/manuals.
• Reduced Air Flow: Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised.
• Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
• Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of circuits might have on overcurrent protection and supply wiring. Consider equipment nameplate ratings for maximum current.
• Reliable Earthing: Reliable earthing of rack mounted equipment should be maintained. Pay particular attention to supply connections other than direct connections to the branch circuit
(for example, use of power strips).
NOTE: Product should not be mounted with the rear panel facing in the downward position.
(continued on other side)
To Contact Avocent Technical Support: Visit www.avocent.com
590-1158-501A
Emerson, Emerson Network Power and the Emerson Network Power logo are trademarks or service marks of Emerson Electric Co. Avocent and the Avocent logo are trademarks or service marks of Avocent Corporation. All other marks are the property of their respective owners. This document may contain confi dential and/or proprietary information of Avocent Corporation, and its receipt or possession does not convey any right to reproduce, disclose its contents, or to manufacture or sell anything that it may describe. Reproduction, disclosure, or use without specific authorization from Avocent Corporation is strictly prohibited. ©2014 Avocent Corporation. All rights reserved.
1
SAFETY AND REGULATORY STATEMENTS
For more product information, please visit: www.avocent.com/manuals to download the user manual.
EMI STATEMENTS
Products which are certified for EMC in the regions or countries indicated will have the required marking or statement on the product label. The applicable statement for that country is listed below.
EUROPEAN UNION
WARNING: This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CANADA
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 du Canada.
CAN ICES -3(A)/ NMB -3(A)
JAPAN
KOREA
USA
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.
TAIWAN
ADDITIONAL CERTIFICATION INFORMATION
Certifications for this product are obtained under one or more of the following designations: CMN (Certification Model Number), MPN
(Manufacturer’s Part Number) or Sales Level Model designation.
The designation that is referenced in the certification reports and/or certificates are printed on the label applied to this product.
2
To Contact Avocent Technical Support: Visit www.avocent.com
590-1158-501A
Emerson, Emerson Network Power and the Emerson Network Power logo are trademarks or service marks of Emerson Electric Co. Avocent and the Avocent logo are trademarks or service marks of Avocent Corporation. All other marks are the property of their respective owners. This document may contain confi dential and/or proprietary information of Avocent Corporation, and its receipt or possession does not convey any right to reproduce, disclose its contents, or to manufacture or sell anything that it may describe. Reproduction, disclosure, or use without specific authorization from Avocent Corporation is strictly prohibited. ©2014 Avocent Corporation. All rights reserved.
