Lehmannaudio Decade High end customisable phono stage Owner's Manual


Add to my manuals
8 Pages

advertisement

Lehmannaudio Decade High end customisable phono stage Owner's Manual | Manualzz

Decade phono stage

High Precision

Passive RIAA-Network

User manual

Please read completely before operating device

Lehmannaudio Manual Decade - page 5 -

Face plate audio section: (simplified)

1 2 3 4

1.

Power control LED

2. Soft Bass Rolloff Filter

Some records tend to have too much low frequency energy especially warped records. To protect your loudspeakers from this energy this Soft Bass Rolloff filter has been installed. The corner frequency is 60 Hz / 6dB per octave. The active filter is indicated by the lit LED.

3. High Gain switch

This switch adds 10dB of gain to the selected mode MM or MC. High gain is indicated by the lit LED

4. MC switch

This switch selects between 36dB (MM) and 56dB (MC) gain. MC gain is indicated by the lit LED

Rear side audio section: (simplified)

Lehmannaudio Manual Decade - page 6 -

6

1 2 3 4 5

1.

2.

S ignal input connector (In) Left Channel

Signal output connector (OUT) Left Channel

3.

Input for the external PWX II power supply

Please connect the power supply to the audio section first and then connect the complete unit to mains voltage!

4. S ignal output connector (OUT) Right Channel

5. Signal input connector (In) Right Channel

6. Ground connection

If your turntable has a separate ground cable you should connect it here. You can connect any of 4mm plugs, open ends, or cable shoes

The signal output connectors are supplying RIAA-filtered high-level output signals. Please connect your output cables to the line input to be used. For example, to a line-level preamplifier, active loudspeakers with volume control or power amplifier input with volume control.

Be careful to preserve correct channel connections – left to left and right to right.

W A R N I N G: You must not connect the output cables to a following phono input because RIAA-filtering and amplification would be done twice! You could damage the following phono stage or your power amplifier and loudspeakers! The resulting noise could even damage your hearing!!!

Notes

Lehmannaudio Manual Decade - page 8 -

Manufacturer‘s address:

Lehmann audio Vertriebs GmbH

Dipl. Ing. Norbert Lehmann

Richard Zanders Str. 54

D-51469 Bergisch Gladbach

Germany phone: +49 2202 280 6240 fax: +49 2202 280 6239 email: [email protected]

Web: www.lehmannaudio.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Passive RIAA-network for accurate sound reproduction
  • Soft bass rolloff filter to protect loudspeakers from excessive low frequencies
  • High gain switch for increased flexibility
  • MC switch for optimal performance with moving coil cartridges
  • RCA input and output jacks for easy connectivity
  • Ground connection for turntables with separate ground cables

Related manuals

Frequently Answers and Questions

What is the purpose of the soft bass rolloff filter?
The soft bass rolloff filter helps protect your loudspeakers from excessive low-frequency energy, especially from warped records.
What is the difference between MM and MC gain?
MM (moving magnet) cartridges typically require less gain than MC (moving coil) cartridges. The Decade's MC switch allows you to select the appropriate gain level for your cartridge type.
How do I connect the Decade to my system?
Connect the signal input connectors (In) to the outputs of your turntable, and the signal output connectors (Out) to the line input of your preamplifier, active loudspeakers, or power amplifier with volume control. Connect the ground connection to the ground cable of your turntable, if applicable.

advertisement