Cree Lighting TRV-CLSM Installation instructions

Traveyo Series

LED Street and Area Light

Back, Front & Cul-De-Sac Light Shield

INSTALLATION INSTRUCTIONS

INSTRUCTIONS D’INSTALLATION

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY

INSTRUCTIONS

1. DANGER - Risk of shock- Disconnect power before installation.

DANGER – Risque de choc – Couper l’alimentation avant l’installation.

SAVE THESE INSTRUCTIONS FOR

FUTURE REFERENCE

TO INSTALL:

1 4 Holes on Luminaire

STEP 1:

Bring the shield up to the luminaire and align the 4 holes of the shield with the 4 holes on the luminaire shown in Figure 1.

NOTE: Make sure to align the shield as shown in

Figure 2.

STEP 2:

Secure the shield using the 4 supplied screws. See

Figure 2.

2

Shield

© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree ® and the Cree logo are registered trademarks of Cree, Inc. Traveyo TM is a trademark of Cree Lighting, A company of IDEAL INDUSTRIES. NEMA ® is a registered trademark of the National Electrical Manufacturers Association.

1 of 1 www.creelighting.com

LPN00646X0001A0_B