Keyboard Language (For USB HID Only)
Programming Quick Guide
- LS6302J/ LS6302JW/ LS6302K
/ LS6302L / LS6302M
/FS5022J/FS5022JW/FS5022K
/ FS5022L / FS5022M
Installation
Make sure that the scanner has the correct cable to plug in the PC
as below described::
*Note : Please install PL-2303 driver for USB serial
Reset Configuration to Default :
(For USB HID, RS232, USB Serial)
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please scan the following barcode. This will reset the
scanner to its factory defaults.
Default
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States: @ | $ # { } [ ] = / ‘ \ < > ~
1D Symbologies -1
ENABLE
UPC-A
DISABLE
North American
Standard USB
Keyboard
German
Windows
ENABLE
UPC-E
DISABLE
French
Windows
French Canadian
Windows 95/98
ENABLE
EAN-8
DISABLE
French Canadian
Windows 2000/XP
French Belgian
Windows
ENABLE
EAN-13
DISABLE
Spanish
Windows
Italian
Windows
ENABLE
Code 128
DISABLE
Swedish
Windows
UK English
Windows
ENABLE
ISBT 128
DISABLE
Japanese
Windows (ASCII)
PortugueseBrazilian Windows
ENABLE
Code 39
DISABLE
Redundancy Level
ENABLE
Trioptic
Code 39
DISABLE
This scanner offers two levels of decode redundancy. Select higher
redundancy levels for decreasing levels of bar code quality. As
redundancy levels increase, the decoder’s aggressiveness decreases.
Select the redundancy level appropriate for the bar code quality.
ENABLE
Code 39
FULL ASCII
DISABLE
Redundancy Level 1
barcode must be successfully read twice
before being decoded
Redundancy Level 2
barcode must be successfully read three
times before being decoded:
1
1D Symbologies -2
1D Symbologies -3
2D Symbologies
ENABLE
Code 32
DISABLE
ENABLE
Matrix 25
DISABLE
ENABLE
PDF 417
DISABLE
ENABLE
CODE 93
DISABLE
ENABLE
Composite
CC-C
DISABLE
ENABLE
Micro
PDF 417
DISABLE
ENABLE
CODE 11
DISABLE
ENABLE
Composite
CC-A/B
DISABLE
ENABLE
Data Matrix
DISABLE
ENABLE
Interleaved 25
DISABLE
ENABLE
Composite
TLC 39
DISABLE
ENABLE
Maxicode
DISABLE
ENABLE
Discrete 25
DISABLE
ENABLE
GS1 DataBar
DISABLE
ENABLE
QR CODE
DISABLE
ENABLE
CODABAR
DISABLE
ENABLE
GS1 DataBar
Limited
DISABLE
ENABLE
Micro
QR CODE
DISABLE
ENABLE
MSI
DISABLE
ENABLE
GS1 DataBar
Expanded
DISABLE
ENABLE
Aztec
DISABLE
ENABLE
Chinese 25
DISABLE
Information in this document is subject to change without notice.
For more information, please visit:
www.riotec.com.tw
R_161124_01
2
">
