2-wire distributor for video module
Art. no. TVHS20310
Page 1 of 1
• 2-wire distributor for the ModuVis door intercom system
• Required for installation with 2-wire video module and 2-wire indoor station
TOTAL MODULAR: THE VIDEO INTERCOM SYSTEMSee people in front of the door, talk to them, open the door. Easy to install, modular and adaptable to any building - with 2-wire technology or via IP network.Perfect 2-wire installationThe 2-wire distributor (distributor, converter unit) establishes communication between the 2-wire video module TVHS20010 and the 2-wire touch monitor (indoor station) TVHS20210. The distributor is a necessary component for the installation of the ModuVis door intercom system with 2-wire technology.Totally modular, extensively expandableA clear advantage: If the basic configuration with video module, indoor station (touch monitor) and 2-wire distributor (necessary for 2-wire installation) is set, additional modules and monitors are simply added to the system depending on the number of flats and local requirements. In this way, up to 49 rings are possible - and one monitor is integrated for each party. Whichever variant of video module and monitor
(2-wire or IP/PoE/WLAN) is chosen - the systems are compatible with each other.
Technical Data:
Dimensions
Width
Height
144 x 90 x 65 mm
144 mm
90 mm
Length
DC voltage supply
Power consumption
65 mm
24 V
2.500 mA
Powered by TCPDF (www.tcpdf.org)
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 12/2022
