Frame for 1 module for surface mounting (stainless steel)
Art. no. TVHS20130S
Page 1 of 1
• Single frame for surface mounting for the ModuVis door intercom system
• Weatherproof housing
TOTAL MODULAR: THE VIDEO INTERCOM SYSTEMSee people in front of the door, talk to them, open the door.
Modularly adaptable to any building and easy to install - with the appropriate installation frame.Installed on plaster: Your ModuVis installationWhen installing ModuVis modules (video module, bell button module, etc.), you can choose between surface and flush mounting. And you can choose between a single installation frame (for 1 module), a double and triple frame (for 3 modules). This installation frame is suitable for surface mounting of 1 module.Totally modular, extensively expandableA clear advantage: depending on the number of flats or living areas and local requirements, modules are simply added to the system, e.g. info module with name plate, bell button module or numeric keypad for keyless access via PIN code. If only the video module is installed and no expansion is planned, the 1-gang installation frame is the first choice. If further modules are planned but are not yet set during initial installation, a larger frame (2-gang, 3-gang) can be selected and the unoccupied part can be covered with an empty module (blind cover).
Technical Data:
Material
Dimensions
Front: Stainless Steel /
Back: Eloxiertes Aluminium
107 x 117 x 37 mm
Width
Height
Length
107 mm
117 mm
37 mm
Powered by TCPDF (www.tcpdf.org)
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 12/2022
