XPOWER AP-2000 2000 CFM Portable 3 Stage Filtration HEPA Air Purifier System Owner's Manual

Air Scrubber Owner's Manual

Model

AP-2000

(115V 60HZ)

Read and save these instructions www.xpower.com | 1-(855)-855-8868 | [email protected]

Index: NA-1-A28

Edition: 1.2.Final

Safety Instructions

!

WARNING - READ AND SAVE THIS INSTRUCTIONS BEFORE USING THIS PRODUCT.

The user of electrical products may create hazards that include, but are not limited to injury, fire, electrical shock. Failure to follow these instructions may damage and/or impair its operation and void the warranty.

• Before operating, remove all packaging material and check for any damage that may have occurred during shipping or any missing items.

• Check power supply to ensure it matches the appliance’s specification.

• DO NOT operate any fan with a damaged cord or plug. Discard fan or return it to an authorized service facility for examination and/or repair.

• Use only on GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.

• DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

• To reduce the risk of fire or electric shock, DO NOT use this machine with any solidstate speed control device.

• DO NOT touch this appliance or the plug with wet hands or while standing in water.

• DO NOT operate the appliance in any pooled water.

• DO NOT use the product in areas where gasoline, paint or other flammable goods and objects are used or stored.

• DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the appliance and void the warranty.

• DO NOT cover the air inlet or outlet on the appliance.

• DO NOT direct the air flow at human faces or bodies.

• DO NOT allow children to play with this appliance.

• AUTOMATICALLY OPERATED DEVICE – To reduce the risk of injury, disconnect from power supply before servicing.

• Remove the power cord from the electrical receptacle by grasping and pulling on the power cord plug-end only, DO NOT pull the cord directly.

• DO NOT attempt to repair or adjust any electrical or mechanical functions of this appliance, as this may cause danger and void the warranty.

• If the appliance is damaged or it malfunctions, DO NOT continue to use it. Unplug the product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.

• Store in a dry area, away from exposure to sunlight, extreme temperature and humidity, or other extreme environments, when not in use.

• DO NOT stack more than three units of this appliance.

• An electronic instruction manual can be obtained through website: www.xpower.com.

English - 2

Items Included

• Air Scrubber x 1

XXX Manual De Usuario (página 10)

XXX Mode d'emploi (page 18)

Model / Modelo / Modèle:

(115V 60HZ)

Read and save these instructions before use

Lire et conserver ces instructions avant utilisation

• Owner’s Manual x 1

Parts Description

Machine

8

10

1 2

16 17 18

3 4 5 6

(1) Power Supply

Receptacle

(2) Circuit Breaker

(3) Power Switch

(4) Pressure Gauge

(5) Control Panel

(6) Directional Caster

7 9 11 12

(7) Fixed Caster

(8) Inlet Grill Cover

(9) Motor Left Housing

(10) Housing

(11) Motor

(12) Fan

(13) Motor Right Housing

13 14 15

(14) Filter Fixator

(15) Power Cord

(16) Wood Box HEPA Filter

(17) Ring Panel Nonwoven

Filter

(18) Nonwoven Filter

English - 3

Installation and Operation Guide

Caster Installation

• Install the casters onto the bottom of the housing. Two casters are directional and the other two are fixed.

• Fasten the screws.

Power Cord Installation

• Connect the plug connector on the power cord to the power outlet of the machine.

English - 4

Extension Setup (Optional)

Exhaust Ducting

• Turn off the machine.

• Attach the ducting hose to the exhaust.

Selecting a Location (Important)

• Enclosed Area: For optimal efficiency and longer filter lifespan, the Air Scrubber should be operated in an enclosed area. Keep all doors, windows and other outside entrances to the room closed.

• Air Circulation: It’s suggested to have a constant efficient air circulation inside your working area.

• Environment Humidity: For optimal efficiency and higher filter lifespan, the Air

Scrubber should not be operated in an environment with a high relative humidity level.

High humidity level could cause blockage and damage to filters.

• Power Cord: The power cord has a length of 25 feet (7.6 meters). Select a location where the power cord can reach the power source.

• Inlet and Outlet Orientation: Also pay attention to the orientation of the air inlet and air outlet. Make sure the airflow won’t influence any object nearby the Air Scrubber.

• IMPORTANT: The effectiveness of the Air Scrubber can be influenced by different factors. You may also find that installing multiple Air Scrubbers may be required for larger enclosed areas.

English - 5

Control Panel

RE

T

PR

ES

TO

Circuit Breaker

Power Switch

10

0

200

300

40

0

Pressure Gauge

Circuit Breaker

If the machine stops working, pressing the RESET BUTTON to could help reset the machine.

Power Switch

• Turn to “ O ” position to switch the Air Scrubber OFF. Turn to any speed position to switch the Air Scrubber ON.

• “ II ” means the higher speed and “ I ” means the lower speed.

Preesure Gauge

This measures the negative pressure between the motor inlet and filter outlet. If the negative pressure exceeds 400 Pascals, it indicates that the filters might have exceeded the maximum capacity of particles, and the filtration efficiency as well as the airflow have diminished. You should check, clean or replace the filters. ( See Page 8: Filter

Maintenance )

English - 6

Transportation

Handle

Carry with Handle

Lift the Air Scrubber with the handles on the side of the housing.

Stack in Carrier

You can stack up to 3 Air Scrubbers and transport.

Brake

Use brakes on the directional casters to brake.

English - 7

User Maintenance Instructions

Frequent maintenance is recommended on this appliance. Failure to follow the maintenance instructions may cause failure of the appliance and void the warranty.

Before performing any maintenance or cleaning, always disconnect the Air Scrubber from its power source.

Machine Maintenance

• When not in use, unplug, and uninstall power cords and all the extensions. Store the appliance in a dry and cool indoor place. Make sure it’s out of reach of children.

• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water directly.

• Check if the grille covers are clean. Remove dirt or any other objects that could block the air inlet and air outlet.

• Do not stack more than three units of this appliance.

Filter Maintenance

To ensure the best filtration efficiency and to prevent secondary pollution of used filters, you should replace or clean the filters frequently or when the filter clean/change light illuminates. Please follow the instructions below.

Unload the filters ( See Also Page 3: Parts Description )

Take out the inlet grill cover and uninstall the filter fixator.

English - 8

Clean the filters ( See Also Page 3: Parts Description )

• Nonwoven Filters* : These filters are washable with water. Use a vacuum or clean cloth to remove loose debris. And then further clean the filter with water. Use a cloth to remove the water on the filter and dry it naturally in the air.

• HEPA Filters* : This filter is not washable or reusable. Highly concentrated particles are captured by the HEPA filter and cleaning this filter can be hazardous to human health and contaminate the nearby environment. You must replace the filter if all the other filters are clean and however the filter clean/change light still illuminates.

Filter storage

• When not in use for a long time, you should store the filter separately from the machine.

• Always clean the filters before storage. Place the filters in a sealed plastic bag and store it in a dry and cool indoor place.

!

WARNING: DISPOSAL OF FILTERS NO LONGER IN USE

The particles captured by a used filter can cause adverse human health effects and contaminate the nearby environment once the filter is exposed to the open air. Adequate personal protection equipment (PPE) is required during the whole process, for example, industry approved masks, eye protectors, gloves and coveralls. You should place the used filters in a sealed plastic bag before disposing. Follow local disposal regulations.

Reload the filters

To ensure the best efficiency and lifespan, each filter must be reloaded in a correct position, sequence and orientation.

Airflow Direction

Tips:

• On one of the side of each filter, there is a label with an arrow showing the airflow direction.

• When placing the filter, the side with label should face up. The arrow on the label should point to the exhaust.

* All replacement filters are available on www.xpower.com.

English - 9

Troubleshooting Guide

PROBLEM

Air Scrubber does not start

Unit runs but no or very low air movement

The additional electrical receptacle has no power

POSSIBLE CAUSE

No electricity.

The power cord is not properly plugged in.

The circuit breaker on the additional electrical receptacle

(Daisy chain) trips.

Air outlet is blocked.

Filters are fully loaded. The filter clean/change light illuminates.

The circuit breaker trips.

SOLUTION

Check for power supply.

Remove and reconnect the power cord.

Remove all appliances on the additional electrical receptacle and press circuit reset button.

Remove blockage.

Clean or replace the loaded filters. ( See Page 8: Filter

Maintenance )

Press circuit reset button.

If troubleshooting does not resolve your problem, please contact XPOWER or other parties authorized by XPOWER for further instructions.

English - 10

Technical Specification

Machine Specification

MODEL NUMBER

Voltage/Frequency

Amperage

Rated Airflow

Speed Control

Cord Length

Unit Dimension

(L) x (W) x (H)

Unit Weight

Safety Certification

AP-2000

115 V~60 Hz

8.5 A

2000 CFM

2 Speeds

25 ft. / 7.6 m

40.2 x 29.0 x 32.3 in. / 102.0 x 73.5 x 82.0 cm

112.4 lbs. / 51.0 kg

ETL

Filter Specification

FILTER MODEL

NUMBER

NF-24

NF-24-RP

HEPA-300-WB

Type of Filter

Nonwoven Filter

Ring Panel

Nonwoven Filter

Wood Box HEPA

Filter

Size

24 x 24 in.

Thickness

-

-

12 in.

Function

Primary filtration for visible and coarse particles.

Final filtration for micro particles.

English - 11

XPOWER Limited Warranty (USA)

1 YEAR LIMITED WARRANTY

XPOWER-branded products purchased in the U.S. from authorized distributors include a 1-year limited warranty. Contact XPOWER to confirm warranty information about your product(s).

This limited warranty covers defects in materials and workmanship in your XPOWERbranded products, purchased in the U.S. ONLY . Local warranty policy (if any) in your country will cover products purchased outside the U.S.

!

IMPORTANT:

(1) Please finish the online warranty registration before usage. Visit www.xpower.com/ service-support/warranty-registration.

(2) This Limited Warranty applies with its own timeliness. Contact XPOWER or visit www.xpower.com for more information.

Items mentioned but not limited to below are not covered by warranty:

(1) Power cord, filters or any other components considered as a “consumable parts” by

XPOWER.

(2) Normal wear and tear.

(3) Problems that result, directly or indirectly, at XPOWER’s sole discretion, from:

(3.1) External causes such as accident, abuse, misuse or problems with electrical power supply.

(3.2) Disassembling, servicing or modification not authorized by XPOWER.

(3.3) Usage that is not accordant with product instructions stated in Owner’s Manual.

(3.4) Failure to follow the product instructions or lack of necessary maintenance stated in Owner’s Manual.

Before contacting XPOWER, please try one or more of the following:

(1) Consult this Owner’s Manual and follow the instructions of troubleshooting guide.

(2) Access www.xpower.com for more advice and information that could be helpful to address your problems.

If you need additional assistance from XPOWER, please:

(1) Email [email protected].

(2) Call XPOWER U.S. Customer Service Department at 855-855-8868 or other numbers provided on www.xpower.com.

(3) Visit XPOWER U.S. Head Office at 668 S. 6th Ave., City of Industry, CA 91746, USA or the most current address provided on www.xpower.com.

Please also have your original proof of purchase and the serial number(s) of your product(s) ready when you contact XPOWER.

English - 12

If you are instructed to return the unit for service or replacement, please:

(1) Request a RMA (Return-Merchandise-Authorization) number.

(2) Use the original or an equivalent packaging, prepay shipping charges at your own expense to the address provided by XPOWER, with the RMA number on the shipping label or the packaging.

(3) Include all the original parts and components.

XPOWER will inspect, assess and advise the repairs needed and applicable cost, if any.

For products under warranty, we will pay to ship the repaired or replaced product(s) to you if you use an address within the Contiguous United States. Otherwise, we will ship the product(s) to you at your own expense.

English - 13

English - 14

English - 15

XPOWER Manufacture, INC.

668 S. 6th Ave.,

City of Industry, CA 91746, USA www.xpower.com | 1-(855)-855-8868 | [email protected]

Read and save these instructions

Index: NA-1-A28

Edition: 1.2.Final