Enterprise email marketing program. We will touch briefly on installing and configuring Campaign Enterprise but the primary purpose will be to guide email marketers using Campaign Enterprise to improve email marketing techniques to utilize and learn best practices for permission email marketing.

Campaign Enterprise is one "link" of a three-link chain, consisting of a

database

of email addresses, Campaign Enterprise and a Simple Mail Transfer Protocol

(

SMTP

) mail server or Mail Transfer Agent (MTA). Each "link" will be discussed in detail.

Who should use this guide?

This guide is for licensed users and evaluators of Campaign Enterprise email marketing program by Arial Software, LLC. Many of the features listed in the manual apply to Campaign Enterprise version 11, (it is always a good idea to upgrade).

Who should use Campaign Enterprise?

Campaign Enterprise is designed for small and large businesses that want to communicate to their customers via personalized email messages. Campaign

Enterprise is a permission based email marketing tool and as such it is not suitable for spammers. Campaign Enterprise will not help "get around" any of the provisions in any

spam

law. To maximize the use of a legitimately obtained list of email addresses, Campaign Enterprise is a great solution. Drop the expensive ASP email-marketing model and move to Campaign Enterprise, which allows email marketing in-house and avoids costly recurring fees typically charged by ASP providers.

Other considerations for using Campaign Enterprise:

•

The list of email addresses is greater than 50,000 and is becoming unmanageable.

No longer want to pay per email costs on sending.

Greater control of email sending, design and database integration.

Tap into the permission marketing economy by tapping into existing, or expanding list of customers.

This manual is broken down into two broad sections, Installation and

Configuration and Features. When describing features, we will explore the basic feature set up and capabilities, and then expand each feature to explore the full

Enterprise Manual functionality. It is best to understand the basic concept of a feature first, and then expand the features based on growing expertise.

Using this guide

The following conventions are used in this manual.

Commands, buttons and actions are Bolded.

Examples are given in Times New Roman Font.

File paths are Italicized.

Merge fields are enclosed in {Curly Braces} and may be italicized or in Times

New Roman Font as necessary for clarity.

•

Use the left side index to navigate to portions of the manual you need.

Use the search feature to find specific information on particular terms.

Use in text links to discover definitions of common terms or move to another section of the manual.

Quick Start Guide

After logging into Campaign Enterprise, the start up menu opens. This is where the fun begins. The initial set up presented here will help you create a simple campaign, and get emails out the door. Details will be provided later as we discuss the variety of features, and how they can help you get more from

Campaign Enterprise. As mentioned above, there are three main elements necessary to get started with sending an email campaign. The

database

list of email addresses, the message to send, and the

SMTP

server to send through.

Datasource

The easiest database to start with is MS Access because Campaign Enterprise can connect to it directly. Before connecting to Campaign Enterprise, ensure that the list of email addresses is entered into an Access database table correctly.

Once the table of email addresses is configured it is time to connect Campaign

Enterprise to the database.

1. Create a New Campaign

2. Name it

3. Click on the Datasource tab

4. Select MS Access as the database type

5. Browse to MS Access database

6. Select the table

7. Select the email address field

8. Select the unique ID, typically the primary key for the selected table

The Message

Admin Settings

The next step is to create, or load the message to send. Campaign Enterprise can send both plain text and

HTML

messages in a multipart format. Detailed explanations of the message types, the email addresses, the templates, and the editor are explained later in the guide. To get started right away keep it basic.

1. Click the create message tab

2. Enter the email address from whom the message is coming

3. Write a comprehensive subject line

4. Click Edit HTML or Email Templates to enter the HTML part of the message

5. Create a message and save

6. Click on Edit Plain Text Message

7. Create a plain text message and save

Send to the SMTP Server

The final step is to connect to the SMTP server to send the messages through.

This is typically the one already in use in the network, Campaign Enterprise just needs to connect to it. A network administrator must do any configuration of the

SMTP server to allow Campaign Enterprise to work properly. Further details on the SMTP server configuration are specified later in the guide.

1. Click the Send Settings tab

2. Enter the name of the SMTP server

3. Enter the username and password if authentication is required

4. Save

Run Campaign

That is all there is to it, the first campaign is now ready to run.

1. Click Run

2. Verify the count is correct, preview the message one last time

3. Click Ok

Check the inbox of the test email accounts to which the email message was delivered to verify that it was received.

Installation

Installation and Configuration

Regardless of the version of Campaign Enterprise selected, the installation is generally the same. Arial Software recommends checking for updates frequently and upgrading to the latest version of the program since features and functionality are continually improving.

Installation

Minimum System Requirements

Campaign Enterprise can be installed on virtually any off the shelf PC. This is fine for smaller lists or small business just getting started with email marketing.

The following are the minimum basic requirements for the PC or server on which

Campaign Enterprise is installed.

•

Operating systems: Windows 2000 / NT workstation / NT server / 2000

Server / 2003 Server / Windows XP / Windows 2003 or XP SP2/ Windows

•

Vista / Windows 7

5GB free disk space

256MB RAM

Internet Explorer 6.0

Bandwidth to the Internet (DSL, T1, etc.)

•

Access to source

database

. ( Supported databases

include MS

SQL

Oracle, FoxPro, MS Access, dBase, comma separated values text files and many other formats. Campaign will not directly read ACT! databases

(unless it has a SQL backend) or Excel spreadsheets, but you can save these data as csv files or export them into MS Access as a solution.)

SMTP mailers supported

: Campaign supports any standard

SMTP

mailer, including: SendMail, LSMTP, MS IIS, Post.Office, Exim, MS Exchange, etc.

Enhanced System Requirements

When utilizing huge lists, with hundreds of thousands to millions of email addresses, Arial Software recommends the following system to increase performance.

•

Operating systems: Windows 2000 / 2000 Server / 2003 Server / Windows

•

XP Professional / Windows 7

10GB free disk space (or better)

Pentium 4 processor (or better)

7200 rpm IDE hard drives or faster (SCSI for extreme performance)

Bandwidth

Dedicated

to the Internet (DSL, T1, etc.)

IP address

(static)

Admin Settings

•

OLE DB

connection to source database (preferred)

SMTP mailers supported: Campaign supports any standard SMTP mailer, including Imail, SendMail, LSMTP, MS IIS, Post.Office, Exim, MS

Exchange, etc. For high performance, consider Port25 solutions or

Ironport servers.

512MB for stand alone Campaign Computer. At least 1GB of RAM if

Campaign resides on the same computer as your SMTP server or database. (More is even better, memory is still relatively cheap so add more if you can).

Internet Explorer 7.0

Install Enterprise

Download the evaluation version of Campaign Enterprise from Arial Software's website, download page. The installation files are rather large; exceeding 34 MB depending on the version available so make sure you have enough room on your computer. Arial Software recommends that when you download, you place a copy of the downloaded file in a directory on your computer. If there were a problem with the installation, then you would not necessarily need to download the file again, simply reinstall from where you saved the copy of the file.

Once you download the file, simply open it, and run the installation executable.

Follow the instructions on the installation process. If you change the pathway to where Campaign Enterprise is installed, make sure you note the drive and the folders. By default Campaign Enterprise is installed on to the following directory:

C:\Program Files\CampaignEnterprise. When this book refers to the pathway for

Campaign Enterprise for any reason, we will assume the default pathway to the program files.

Once the installation is complete a detailed installation log file called

"INSTALL.LOG" is available in the main Campaign Enterprise directory,

C:\Program Files\CampaignEnterprise. If there were a problem during the installation, you can refer to this file for troubleshooting. If you require technical support, this file may be requested.

Configuration

Campaign Enterprise is meant to run at all times while a campaign is being sent, or if campaigns are scheduled. Many of the advanced features like click through or opened email tracking require Campaign Enterprise to be up and running to ensure their proper function. Install Campaign Enterprise on a computer that is capable of acting as a server, even if it is not a server class computer.

Sample Configurations

Enterprise Manual

There is no specific recommended configuration for how you want to set up

Campaign Enterprise in your network. The system resources available for each component of Campaign Enterprise, the

database

, and the

SMTP

server determine the configuration. The following examples are basic configurations; you will likely need to discuss considerations with your network administrator.

This diagram represents the Database, Campaign Enterprise and SMTP server on three separate computers. Recommended connections between the

SQL

type Database and the Campaign Enterprise computer are via an

OLE DB

connection. Between the Campaign Enterprise computer and the SMTP server, we recommend a 10/100 mbs Ethernet connection.

This diagram represents the Database on a separate computer, Campaign

Enterprise and SMTP server on the same computer. To eliminate the need for a connection between Campaign Enterprise and the SMTP server, you might consider putting them on the same computer. Make sure that your computer has enough resources to run both applications.

This diagram represents Database and Campaign Enterprise on the same computer, SMTP server on a separate computer. If you are using an Access type database, you need to put the database and Campaign Enterprise on the same computer. If you need to do this, you may want to split out your SMTP server, again we recommend using a 10/100 mbs Ethernet connection.

This diagram represents all three components on the same computer. If you decide to put all of your components on the same computer, make sure you have enough hard disk space and RAM to run all the applications efficiently.

Starting Campaign Enterprise

Start Campaign Enterprise in one of two ways; application mode or

service

mode. Initially you want to start in "Application Mode" until everything is configured properly. To start in "Application Mode" simply click "Start > All

Programs > Campaign Enterprise > Campaign Enterprise" a splash screen

Manage Email Campaigns followed by a small window, called the Server Manager window opens. If this is the first time starting Campaign Enterprise, an application browser window opens automatically leading to a product registration page.

At this point you are prompted to enter your serial number if you already purchased a license, or continue with an evaluation. The evaluation version of

Campaign Enterprise is fully functional, meaning you can test any of the features available. The only limitations of an evaluation are on the number of emails you can send at one time (100) and the number of users available (1 in addition to the Admin user). Each message that is sent is appended with a tagline promoting Arial Software. After you enter a serial number, or continue with the evaluation, you are asked to log into the Campaign Enterprise server. The default username is "Admin" and the default password is "Admin", these can be modified in the Administration area of Campaign Enterprise after the initial log in.

The other way to start Campaign Enterprise is to run it as a service

, or "Service

Mode." During installation the campaign executable is registered as a service, which allows Campaign Enterprise to run in the background, and start automatically when the computer is turned on. To set up the Campaign

Enterprise service, click "Start > Control Panel > Administrative Tools >

Services". Find the Campaign Enterprise service in the list of services and highlight. Click on the properties icon and examine the service properties. When running as a service, it is important to set up Campaign Enterprise with full privileges so that there are no obstructions to running Campaign Enterprise or connecting to your database. Setting up a user logon is recommended. Please see your network administrator to ensure that the user logon has all the privileges that are required.

Bandwidth

There is no simple translation of

bandwidth

to how many emails per hour your configuration will send, the primary bottlenecks for sending speed are the

SMTP

server and the bandwidth. The more bandwidth you have, the faster your emails will go out. This table assumes you do not have any limitations on your SMTP server at all, this is just pure bandwidth speed and that you have a 1 kb message.

Available Bandwidth

28.8K Modem:

56K Modem:

ISDN:

Approximate Average emails/hour

1,300

2,500

5,800

Data Rate (bits per second)

28.8 Kbps

56 Kbps

128 Kbps

Cable Modem:

DSL:

23,000-140,000

23,000-370,000

512 Kbps to 3 Mbps

512 Kbps to 8 Mbps

Enterprise Manual

Activation/Serial Numbers

Serial Number

The Serial Number unlocks the Enterprise edition you purchased. Once you enter your serial number you will not be asked for it again.

To verify or modify your Serial Number click Administration > Manage

Configuration.

The current edition of the software is displayed at the top of every page.

Campaign Service

Campaign Enterprise can run automatically in the background as a

service

Meaning that as long as the machine on which Campaign is installed is up and running, Campaign will be running in the background. While running as a service, Campaign can automatically start up when the machine is booted.

1. Go to Start > Settings > Control Panel > Administrative Tools > Services

2. Double click CampaignEnterprise11 in the list of services, the Properties window will appear.

Manage Email Campaigns

3. Select Automatic from the drop down list by "Startup type:". (Manual is the default type, meaning the Campaign server is started by being accessed through the Start Menu or shortcut, or you have to manually start the service.)

4. Click the Log On tab.

5. Select This account and browse to an Administrator account on your system. Selecting an Administrator account will ensure that Campaign has access to all the system resources.

Enterprise Manual

6. Enter the password for the Administrator account and confirm the password.

7. Click the General tab.

8. Click Start to start Campaign Enterprise.

To view the server status while running the program as a service, from the

Main Menu go to Administration and select Server Manager Status. In the status window you can view the processes being run by the software. From this window you can enable/disable the POP checking, Schedule checking and

Debug Mode.

Admin Settings

The administration tab is located at the top of the Main Menu screen of

Campaign Enterprise after you log in.

The tab is only available to Admin users, which include the main Admin user and any user account that is designated as an Admin user. The Administration tab allows the user to access the following sections:

•

Default Campaign Configuration

– default and global Campaign Enterprise settings.

•

Server Manager Status

– to monitor the events occurring on the

Campaign Enterprise server, also allows you to enable debug mode, and

•

• manage some of the server functions remotely.

SMTP Connections – create and manage global sending configurations.

Blackout Dates

– limit dates on which campaigns can be scheduled.

Database Shortcuts

– allows you to set up different connection strings to various databases. Ideal for multi user editions of Campaign Enterprise

•

• where you are managing several client configurations. This feature must be enabled in the Default Campaign Configuration section.

Email Accounts

– create and manage bounce and unsubscribe email accounts globally.

Manage Users

– set up and edit user accounts. In the evaluation and single license versions only the Admin user and one additional user are available.

•

Manage Groups – only available with a multi-user license. Allow you to

create and edit groups of users.

Email Footers

– configure and manage email footers to be appended to campaigns.

Software Update – look to see if you have the latest version of Campaign

Enterprise.

You can also access the various sections from the bottom of the page by clicking the corresponding icon. Hover over the icon to see where it will take you.

Only users with administrator privileges have access to the administration functions in Enterprise.

Enterprise Manual

Default Campaign Configuration

Click the Manage Configuration button to edit the following.

Registration Information

This is where the Serial Number

to activate the program is entered. If an additional user license was purchased, first enter primary serial number and click save, then return to the configuration page and enter the user license serial number.

Campaign System Settings

•

Set the Admin

port

number. The default is 82. This port is used for remote access via a web browser.

Set the ports used by Campaign Enterprise, the default ports are 81 for click through and opened email tracking features.

Set the domain name or IP addressed used by Campaign Enterprise for tracking click through links and opened emails. The default is 127.0.0.1 which is the localhost

IP address

. (This IP or domain must be accessible to the public in order for the click through, opened email tracking, subscribe, or web unsubscribe processing to work. Many new browsers will not serve up pages using an IP address so it is highly recommended that you use a domain name. A firewall or router rule must also be set to allow requests coming to that domain, on the specified port, to be served up by the Campaign computer instead of the normal web server).

•

Remember that this domain name must be accessible from the internet in order to allow the above processes to work.

User session time out is set to 15 minutes by default. When accessing

Campaign Enterprise remotely using a web browser, closing the browser window will not kill the session. If you have people logging in remotely, you may want to decrease the time out period to something more reasonable.

POP account monitoring cycle is set for 5 minutes, this is how often

Campaign Enterprise checks the POP accounts for bounce and email unsubscribe processing.

You can also enable the POP processing to only occur at certain times.

Just enter the start and end times in the appropriate fields using the following format: 12:15AM.

Manage Email Campaigns

•

Database

Shortcuts are useful when you have many clients from different sections and you want to separate database connections. The default setting is disabled.

Stored Procedure

updates are advanced write back options. The default setting is disabled.

Run authorization required is off by default.

Web server logs are disabled by default.

Feedback Loop

Campaign can monitor an email account that is signed up for one or more

feedback loops

. Campaign can then scan the original email and execute the unsubscribe feature automatically. We recommend that you use a secondary account to which your typical feedback loop messages are copied.

•

Enter the server type,

POP3

IMAP4

•

Enter the name of the server.

Check the

SSL

box if the account requires a secure connection.

•

Enter the username and password for the account you are checking.

•

If you are using IMAP4, select the folder you want to check.

Database Cursor types

This is how Campaign Enterprise marks the database for updates. The default is

Client Side

cursors

•

Client side cursors allows Campaign to set the markers on the database in order to find the records to update.

•

Server side cursors uses the default markers set by the database.

IP Binding

IP Binding should only be adjusted if you have a public assigned exclusively to campaign. You would enter the IP here. To log in, you would use the bound IP even if attempting to log into campaign locally.

You should check with technical support prior to setting up IP binding to ensure that it is something you need. Adding an IP before you have everything configured properly can result in making Campaign inaccessible.

Server Manager Status

The Server Manager Status window shows the events that occur on the server.

The same data that can be viewed on the Server Manager Window when it is operating appears on this screen. Events are recorded in this window, like click

Enterprise Manual throughs, opened emails, bounces and unsubscribe requests as the requests come into the server and update the

database

•

Enable Email-based Response Monitoring is basically the POP account checker for managing bounces and email unsubscribe/subscribe requests.

If you disable this feature, the POP checker will not log in to the bounce, unsubscribe or subscribe POP accounts and gather the email unless you perform the function manually.

•

Enable Scheduler Monitoring – If you disable this feature, scheduled campaigns will not execute until you re-enable. This is useful if you are troubleshooting a problem, and you don’t want a bunch of campaigns

• being sent, and possibly failing or clogging your resources while debugging.

Debug mode is disabled by default to prevent huge files being written during normal operations. If you are troubleshooting an issue, you would enable debug mode, which will record various activities that could be

causing you problems. The debug logs

are located in the Campaign

Enterprise program folder, C:\Program

Files\CampaignEnterprise\www\Debug. These files can also be accessed from the Server Manager window, or here in the Server Manager Status window.

•

Trace.log – this log records interactions between Campaign

Enterprise and your database.

•

Batch.log – this log records actions processed by the batch

•

• processor which collects all data from click throughs, opened email tracking, bounces, unsubscribes and subscribe features, and updates the database.

POP.log – this log records the conversations with the POP accounts that are set up for bounce processing, email unsubscribe and email subscribe processing.

SMTP

.log – this log records the conversations with the SMTP server to which a particular campaign is connected.

To clear the list of actions from the list, simply click the clear status list button on the left.

To execute the Email-based Response checker and the Batch processor click the Execute response check button on the left. You will need to refresh to see the most recent results.

Database Shortcuts

Database

shortcuts allow the administrator to protect the database connections by assigning connections to specific users and groups. By default, Database

Shortcuts are disabled and may be enabled in the Default Campaign

Configuration screen.

•

If you select a built-in list, select the particular table you want to use from the drop down list.

Manage Email Campaigns

•

If you select access

•

Click browse and find the pathway to your Access database

. A typical pathway may look like, C:\Documents and Settings\user\My

Documents\dbname.mdb.

•

Click Select to return to the datasource tab

If you select a different type of database, click browse and select the

DSN

connection from the list of System DSNs.

Assign the shortcut to the users and or groups to whom you want to give permission. If a user logs in and does not have any shortcuts available, they will get a warning message to contact an admin user to set one up for them.

Email Accounts

Campaign uses

POP3

IMAP4

email accounts to help manage bounces and email unsubscribe processing. In the email accounts area, you can configure any number of email accounts to be used for this purpose. The options will be available in the campaign edit screens for those features.

•

Click new to create a new email account.

Name the account using something descriptive to make it easy to select.

Set as default if you want this to be the default account.

Enter the email address for this account.

Select the server type, Campaign can use either POP3 or IMAP4 mail protocols.

•

Enter the name of the email server.

Check the box to enable

Enter the username, typically the email address of this account.

Enter the password.

SSL

if required by the server.

Click test to ensure the connection works.

WARNING: Do not use a personal email account for bounce processing, campaign reads the emails then DELETES them. Campaign will delete all emails in the account once processed.

The Email Account management manages both unsubscribe email accounts and bounce email accounts. Steps should be taken to ensure that the account is used for its intended purpose. You do not want to use a bounce email account for managing unsubscribes as important information may be lost. When you name the account, make it clear what type of account it should be used for.

SMTP Connections

Enterprise Manual

To send a campaign to a mail server, you must create some sort of

SMTP

connection. These are managed globally in the Admin Settings > SMTP

Connections area, or through the campaign edit screens on the Send Settings page. On the SMTP Connections page, you will see a list of all the available connections already created. When updating from an earlier version of campaign, a connection should be made for each separate connection listed in the earlier version's .sto file. If not, they will need to be recreated.

Edit Existing Connection

•

To edit an SMTP connection, highlight the name of the connection and click edit, or double click the entry.

Edit New Connection

•

To create a new connection, click New.

Name the connection, differentiate the connections through the name to make them readily identifiable. E.g. "Marketing Connection".

Select the type of connection it will be:

•

SMTP - the standard connection to a mail server

•

Multi-SMTP - choose up to ten servers to send the emails to. The

• servers are used in a round robin, not simultaneous fashion.

EML Files

- drop the EML files directly into the network mail server's email message

queue

SMTP

•

Enter the name or

IP address

of the server, e.g. mail.server.com, or

192.10.10.1

Add an alternate

port

if required by the server, e.g mail.server.com:2525

Check the box for

SSL

if the mail server requires SSL or

TLS

Enter an alternate

HELO

header. This will eliminate the server pointing back to the computer name, which many remote ISPs check.

Set the number of emails per connection, zero is the default. When you enter a number, Campaign breaks the connection at that point, then immediately reconnects.

Lengthen the SMTP time out if necessary.

Delay the emails by entering the number of messages per hour to send to the server, formerly called throttling.

Select the authentication options as required by the SMTP server. Contact support for the server to find out what sort of authentication may be required.

Multi-SMTP

Manage Email Campaigns

•

Enter the name or IP of each additional server you want to use, enter the alternate port as above if required. No authentication is currently available for the multiple SMTPs.

To EML Files

If Campaign resides in the same network of the email server, you can bypass the

SMTP connection and drop the emails directly into the message queue of the mail server. The drive must be mapped so that Campaign has access to it, e.g.

C:\WINDOWS\~\~\mailserver message Queue

Blackout Dates

Blackout Dates can be set so that scheduled campaigns will not be sent on the specific dates. To set a Blackout Date from the Main Menu click the

Administration link, then the Blackout Dates icon.

To create a new Blackout Date:

1. In the Blackout Dates Menu click the New Blackout button.

2. Give the Blackout Date a description.

3. Enter the Month, Day, and Year for the Blackout Date.

4. Click Save Settings to save your Blackout Date.

To edit a Blackout Date:

1. Highlight the Blackout Date and click the Edit icon.

2. Make any changes to the Blackout Date and click Save Settings.

To Delete a Blackout Date:

1. Highlight the Blackout Date and click the Delete icon.

Enterprise Manual

2. Click Delete to delete the Blackout Date, or Cancel to cancel deleting the

Blackout Date.

Once a Blackout Date has been set you will not be able to schedule a campaign

on that date, it will be displayed in the scheduler

as shown below, this is a global setting for all campaigns, it is not campaign specific.

Manage Users

By default, the users section only has the Admin user and the additional user already set up. With a single user license, you can configure an admin user, which isn't counted, and one user account. The default username and password for the additional user is Demo Demo.

•

Click New user.

Enter a username.

Enter a password.

Allow admin rights if necessary.

Disable

attachment

browsing to turn off this capability for this user.

Assign the user to any existing campaigns if you want.

Assign the user to a group.

When deleting a user with assigned campaigns, you are prompted to reassign them to another user.

An admin user can also log out another user if a session needs to be freed up.

•

Select the user.

Click Logout.

A user elsewhere can then take over the session. If a user logs in as the same user on another system, it will take over the session.

Manage Email Campaigns

Manage Groups

By default, the group section is unavailable in the evaluation mode since it is has just a single user and an admin user. Standard edition also does not have a multi user option and will not have group management available.

•

Click New.

Name the group.

Assign the users.

Users can be assigned to more than on group.

Email Footers

Email footers can be used to append information to every email campaign that enables that feature in the create message area. Legal,

privacy policy

, unsubscribe, and company address information can all be included. You can enter plain text or use

HTML

to design the footer.

•

Click New.

Name the footer, e.g. "Legal."

Enter the footer information.

Save.

In the Compose Message Area, scroll to the bottom of the page to select the appropriate footer to be appended to all the emails.

Software Update

Click the link to see if there are any software updates posted on the revision history page on Arial's website.

Manage Email Campaigns

Managing Email Campaigns

After logging into Campaign Enterprise, the start up menu opens. The initial set

up presented in the Quick Start Guide

will help you create a simple campaign, and get emails out the door.

The following pages provide more details on managing and configuring your email campaigns.

Main Menu

Template Campaign

Campaign Edit Screens

Types of Campaigns

Elements of a Successful Email Campaign

As mentioned previously, there are three mechanical elements to creating a campaign with Campaign Enterprise; connecting to a

database

list of email addresses, composing a personalized email message and sending the messages to an

SMTP

server for ultimate delivery. Creating a good campaign, which maximizes your customer knowledge to its fullest potential, is a different story. Before we get into how to make your campaigns better, we will go over what makes a campaign good.

Personalization

Industry experts all agree that a personalized email message is far more effective than anonymous mass mailing, whether in the print world or in the electronic mail world, personalization is key. Campaign Enterprise was designed as the first personalized bulk email program in the industry, and has since grown to the extremely flexible and robust program it is today. Message personalization and permission marketing have always been a part of Arial Software’s philosophy, and over the years we have been proved right in our assumption that people don’t want email from people they don’t expect to send them any. Campaign

Enterprise can only use the data that you gather, so the more you know about your customers, the more Campaign Enterprise can help you with your email marketing.

In addition to the email address, you should collect the following information from your customers when they agree to let you email them.

•

First Name

•

Last Name

Manage Email Campaigns

•

Main Menu

When you first log into Campaign Enterprise you will be taken to the Main Menu.

From here you can create new campaigns, edit existing campaigns, view reports, set a schedule, test a campaign or run a campaign. By default the campaigns are listed in the order in which they were created. The campaigns can also be sorted by owner, schedule date, date last run, campaign id, or campaign name. A total of twenty campaigns appear on a page. There are no limits on the number of campaigns you can create. Search tools are available for when you have too many campaigns to find at a glance.

After a campaign is started, the progress will also show on the main menu with a small graphic that is updated every minute or so.

A note can be appended to each campaign as well. In the note section you can leave instructions, or indicate what remains to be completed on a campaign if you are working corroboratively.

Main Menu Components

The program edition and version number is displayed at the top of the page.

The user account you are using is also displayed at the top of the page.

Click Logout to logout as one user and back in as another or before closing the window to free up a user session.

Click Campaigns to return to the Main Menu from any other page in the program.

Click

Subscriber Lists

to import and manage email addresses in the built-in

database

Click

Admin Settings to manage global campaign connection settings and

monitor the server manager, and manage users and groups.

Manage Email Campaigns

Click New to create a new campaign

Highlight a campaign and click Edit, to edit an existing campaign

. You can also double mouse click on a campaign to edit.

copy a campaign

, select the campaign, then click Copy and name the copied campaign.

Highlight a campaign and click Delete to remove a campaign from the list. This action cannot be undone.

Click the Refresh button to refresh the status of the campaign projects displayed on the Main Menu.

add a note

to a campaign, highlight and click the Note icon.

schedule a campaign

, highlight the campaign and click Schedule.

Click the Reports icon to see the reports

for a selected campaign.

Enterprise Manual

To run a test campaign

to an address you specify, highlight the campaign and click the Test icon.

run the campaign manually, as opposed to scheduling, highlight the campaign

and click the Run icon.

Search for Campaign

The search function is made available so that you can search through the pages of campaign names you have created.

•

Campaign Name

•

Enter the name or a portion of the name of a campaign you are trying to

•

• find.

Click Search.

To clear click All.

Category

Select a category from the drop down menu to find all the campaigns assigned to that category.

Sort by

Allows you to sort the Main Menu by the Campaign Name, Campaign ID, Owner,

Last Run date, and Scheduled date, click on the header row of the list of campaigns in order to sort.

Page Number

(If there is only one page of campaigns, the page feature will not be displayed.)

•

Select the Page number from the drop down menu.

•

Click on the Next or Previous buttons to move to the next or previous page.

Bottom Toolbar

The technical bulletin and marketing bulletin buttons at the bottom of the page flash when new information or alerts pertaining to Campaign Enterprise are available. Each user is alerted when they login. When the button is clicked, a web page will open containing links to information like version upgrades, new

Manage Email Campaigns documentation or other important information pertaining to Campaign Enterprise.

Once the message is read, the button will stop flashing, but the information will still be available by clicking the technical bulletin button.

Direct access to the administrative features are available through the bottom

toolbar as well, including, Default Campaign Configuration

, Email Accounts , Send Connections

Groups

and Users

Template Campaign

The template campaign is where you can configure some of the default settings like the sending connection, the

database

connection or any other optional settings that you want to include for new campaigns. When you set up a template, any new campaign will already have the settings included in the template.

In a multi-user environment where you are setting up campaigns for a variety of clients with different connections, you would want to ensure that the default campaign is not set up with sensitive information, or is turned off altogether.

You can also set up one or more campaigns that are meant to be copied as additional templates.

Campaign Edit Screens

To create a new campaign, click New on the Main Menu. You can create a blank

campaign or base it on the designated Template Campaign

To edit an existing campaign, select the campaign in the Main Menu

list and click the Edit icon, or double mouse click on the campaign.

The following pages are included in the campaign edit screens.

•

Campaign Settings

Data Source

•

Compose Email Message

•

•

•

Enterprise Manual

•

Unsubscribe

Misc. Settings

Campaign Settings

Campaign Settings

The first page on the edit screen allows you to add and modify basic campaign settings:

•

Change the name of the campaign

Enter a category name, “marketing”, “client a” for example. Or leave blank.

•

Admin users can change the owner of the campaign.

•

Archive campaigns using a specific date, or check the archive box. This disables the campaign from being running, but allows it to listen for straggler updates like click throughs and opens.

•

When run approval is enabled in the Default Campaign Configuration area, an admin user must check the Authorize Run checkbox in order for

• the campaign to be sent.

Each campaign may be designated as the Template campaign.

Archiving Campaigns

Archiving a campaign removes the campaign from the main menu, but still allows all the tracking in the campaign to take place. The campaign cannot be run again unless it is un-archived. To view the archived campaigns go to Filter List

by Category and select *Archived*.

If you need to run an archived campaign, you will need to restore the campaign by un-checking the archive check box on the Campaign Settings page within the campaign. It will re-appear on the main menu where you can run the campaign.

Manage Email Campaigns

Do not set an archive date unless you mean for the campaign to be archived on that date. If you fill in with the current date, it will not show up on the main menu unless you hit the Archived category.

Data Source

Data Source

The Data Source page is where you connect Campaign Enterprise to your

database

list of email addresses.

You can use a basic connection to a table or query on your database, or write your own

SQL

select statement.

Basic connection

SQL Statement

Campaign Enterprise can connect to any Open Database Connectivity (

ODBC

) compliant database using a system Data Source Name (

DSN

) or

OLE DB

provider. Text (

.txt

) and comma separated value (

.csv

) files also need to have a

DSN set up in order to use them. These types of files cannot be updated however rendering many of the Campaign Enterprise features virtually

ineffective. Campaign now has built-in Subscriber List

available to which a basic list of email addresses can be imported.

At this point you should already have some sort of database configured where your email addresses are stored. If not, you will need to set one up. Please see

the database section

. For testing purposes we recommend setting up a small table on your primary database with just a few email addresses that you can access. A selection of internal and external email accounts will allow you to see how your campaign appears in different environments.

Connect To A Database

Select the

database

type from the drop down menu:

•

If you are using database shortcuts, simply pick the shortcut name from the list for which you are approved.

•

If you select a built-in list, select the particular table you want to use from the drop down list.

•

If you select access

•

Click browse and find the pathway to your Access database

. A typical pathway may look like, C:\Documents and Settings\user\My

•

Documents\dbname.mdb.

Click Select to return to the datasource tab

Enterprise Manual

•

If you select a different type of database, click browse and select the

DSN

connection from the list of System DSNs.

When you successfully connect to the database you should now see options in the Table/Query Name field. If you do not see anything, it does not necessarily mean you are not connected. If your database has more than 300 tables and queries you may have to type the name of the table you want. For example, most Oracle databases can easily have 500 tables in them. Rather than wasting resources pulling all of that information into Campaign Enterprise, the field changes from a drop down, to a text field and you need to enter the name yourself. A typical name for an Oracle table might be

OWNER.ORACLETBL.FIELDS. (Oracle likes the tables to be in all caps).

Once you have successfully selected the table, the Email address is populated with the fields found in the selected table.

•

Select the email address field. This is the field in your database containing the email addresses.

•

Select the unique ID. This step is optional for now, but is important for the advanced features. If your email addresses are truly unique, you can use the email address field here.

To ensure that you are connecting ok, click on the Preview button

and examine the table. You can look at the other fields from the additional drop down menus

and clicking the Refresh button. Click Return to get back to the data source

tab.

The preview only shows the first 100 records in your database, but displays the total number of records at the top of the page. If the number of records in your table exceeds the limits of the evaluation, or the licensed edition of Campaign

Enterprise, you will see a warning message next to the total. Prior to sending, you will need to filter your list to only send the authorized number.

ODBC Connection

When connecting to a database, if an

ODBC

Connection is selected, then a list of current System DSN (Datasource Name) entries will be displayed. When you select one of the DSN sources from the list, a DSN string appears in the

Datasource box. You may need to add other information to this connection string such as a username and password. Most ODBC Connection Datasource entries will look like the following:

DSN=MYDATASOURCE;UID=username;PWD=password;

You have the option of filling in the Datasource box manually without using the

Browse button.

System DSN entries can be added by going to the ODBC Administrator in the Control Panel.

Manage Email Campaigns

OLE DB Connection

If you have a very large database or are using complex filters to coordinate your campaigns, we recommend that you use an

OLE DB

connection string for your database connection. Here are some of the more popular database formats with their basic connection strings. Simply enter the OLE DB string in the connection field directly.

Sample OLE DB Connection Strings (variable portions are indicated in RED )

MS Access

For Standard Security:

Provider=Microsoft.Jet.OLEDB.4.0;Data

Source= C :\\DatabasePath\\MmDatabase.mdb;

User Id= Username ;Password= Password ;

Using a Workgroup:

Provider=Microsoft.Jet.OLEDB.4.0;Data

Source= C :\\DataBasePath\\mydb.mdb;Jet OLEDB:System

Database= System.mdw

;

MS SQL Server

For Standard Security:

Provider=sqloledb;Data Source= ServerName ;Initial

Catalog= DatabaseName ;

User Id= Username ;Password= Password ;

For Trusted Connection security: (Microsoft Windows NT integrated security):

Provider=sqloledb;Data Source= ServerName ;Initial

Catalog= DatabaseName ;Integrated Security=SSPI;);

To connect to a "Named Instance" (

SQL

Server 2000) you must to specify

Data Source=Server Name\Instance Name like in the following example:

Provider=sqloledb;Data Source= ServerName\InstanceName ;Initial

Catalog= DatabaseName ;

User Id= Username ;Password= Password ;

To connect with a SQL Server running on the same computer, you must to specify the keyword (local) in the Data Source like in the following example:

Provider=sqloledb;Data Source=(local);Initial

Catalog= DatabaseName ;User ID= Username ;Password= Password ;

Enterprise Manual

To connect to SQL Server running on a remote computer ( via an

IP address

Provider=sqloledb;Network Library=DBMSSOCN;Data

Source= 90.1.1.1,1433 ; Initial Catalog= DatabaseName ;User

ID= Username ;Password= Password ;

Oracle

MSDAORA is the OLE DB Provider from Microsoft:

Provider=MSDAORA;Data Source= OracleDB ;User

Id= Username ;Password= Password ;

OraOLEDB is the OLE DB Provider from Oracle:

Provider=OraOLEDB.Oracle;Data Source= DatabaseName ;User

Id= Username ;Password= Password ;

MySql

You must get the syntax exactly correct. The 'yourdatabase' is the name of the database not the server name. This string will connect to the first

MySQL Server running. If you have multiple options, you may have to inquire how to make the string work with your server. You will need the logins to your database. You must replace the 'mysql' part of the above connection string with the exact name of the MySQL driver installed on your computer. To find that name you go to the Control Panel > Administrative

Tools > Data Sources (ODBC) and look at the Drivers tab. Track down the

MySQL driver. It must be installed to use the OLE DB connection. They are available from the internet for free.

driver={ mysql }; database= yourdatabase ;server= yourserver ;uid= username ;pwd= password ; option=16386;

Use Basic Filter

If you only want a subset of your list to receive an email, for example only customers in Idaho, you will need to apply some the basic filter to select your data.

•

Select the field by which you want to sort, in this case “State”

Select the operand. For numeric values use the “=” sign, for text strings, you will want to use “Like”

•

Enter the value by which you want to sort, in our example “Idaho”

Click the preview button to ensure that only those records that have a value of Idaho in the State field are displayed. If you see no records returned, you likely do not have anything matching your criteria.

The basic filter contains six columns, and five rows. Select the records in the specified table where the field in selected in the first column equals some value.

In this case:

Manage Email Campaigns

WHERE bounce = 0

There are no additional values specified in the rows across, only records that have not previously bounced are included in the record set.

Each row can be thought of as an AND parameter of a select statement.

WHERE bounce = 0

AND

WHERE unsubscribe = 0

Now records that have not previously bounced, and that have not submitted an unsubscribe request are included in the record set.

The values going across from left to right can be thought of as OR parameters of a select statement.

WHERE salesrep LIKE Stan OR LIKE Beth

In this case, the records where the sales rep are either Stan or Beth and that have not bounced or submitted an unsubscribe request are included in the record set. Any other records associated with sales reps other than Stan or Beth will not appear. Depending on the type of

database

, wildcards like * or % may need to be used when filtering text data. For example: *Stan* or %Beth%. To verify that the correct records are selected, click the preview button.

When you create your filters, make sure they make logical sense or you will not get the expected results.

You can also use the LIKE and NOT LIKE filters enter criteria that you would like more than one record to match with, for example if you want to send to all hotmail.com addresses in your table use the following filter,

Use SQL Statement

The advanced filter is much more flexible and allows full

SQL

(structured query language) select statements. To use a full select statement, choose advanced in the feature set selector. When using a select statement, the table or tables from which data is pulled need to be specified in the statement.

SELECT * FROM dbo.tablename

Enterprise Manual

The * sign indicates all the fields in the table. All fields are included in the record set and any field is available as a merge field in the email message.

To exclude tables use the following format.

SELECT (ID),(email),(firstname),(lastname),(bounce),(unsubscribe),(salesrep)

FROM dbo.tablename

Only those fields specified are included in the source record set, and only those fields are available as merge fields in the email message. The ID and the email address field must be included. A field not listed can still be used as a filter, but it is harder to determine what is going on if it is not included in the output.

SELECT (ID),(email), FROM dbo.tablename WHERE bounce = 0

After selecting the fields, the data can be filtered in the same way as shown above. Here is the select statement representation of the simple filter example.

SELECT * FROM dbo.tablename WHERE bounce = 0 AND WHERE unsubscribe

= 0 AND WHERE salesrep LIKE %Stan% OR LIKE %Beth%

To verify the correct records are selected click the preview button.

Queries and Views

Another option is to connect to a pre-filtered query or view that resides on the

database

. This is the same thing as the advanced select statement, but it is placed on the database rather than sitting in Campaign Enterprise. This option is highly recommended for extremely complex queries or views since such functions are best handled on the database itself.

The query or view is selected in the Table/Query drop down if properly configured and accessible through the database connection in use. The simple or advanced filtering options can further apply to a query or view, but it is best to manage everything on the database when using this option.

When using a query, it is a good idea to select a write back table since many queries and views are not updatable. The write back table specified should be the one containing the email addresses and the primary key of used in the query.

Database Preview

Original Datasource:

Write-Back Table:

At the top of the preview pane the message count is displayed and the first 100 email addresses are listed. If you filter your

database

or use an advanced select statement you can verify that the filter or query is working correctly before sending out your campaign.

You can view up to two additional fields in your table. Select the field(s) from the drop down list and click Refresh.

Enterprise Manual

Duplicate records are included in the total message count in the database preview. Duplicates are not processed until the campaign is run.

Write Back Tables

When you enable an advanced feature in the Set Up tab that requires a write back table, you will be prompted to update that information before proceeding.

Write Back to the Source Table

Select the unique ID field from the Original

database

source, do not check

Select Write-Back table.

Write Back to the Source Table (with

SQL

Statement checked)

The Select Alternate Write-Back Table check box will be checked automatically.

Select the original datasource table to update from the drop down list.

Select the unique ID field of the table, query or view to which you want to write back.

Write Back to an Alternate Table

•

Check the Select Write-Back Table check box.

•

Select the alternate table to update from the drop down list.

•

Select the unique ID field of the table, query or view to which you want to write back.

•

Make sure the email address field is included in the table, query or view to which you are writing back, you can then preview the table you have selected for the write-back table.

Manage Email Campaigns

Response Lookup Table (Optional)

Select a table and a unique ID below in order to lookup email addresses quickly for response write-backs. When the SQL statement above gets too complicated you can use this setting to speed up the write-back performance.

•

Select the table, this should be the main table where your email addresses reside.

•

Select the unique ID field, should be indexed and numeric.

Select the email address field.

In order to write back to a separate table the unique ID fields need to have a one to one correlation. Meaning that each record in both tables must have the same unique ID. If you do not have a one to one relationship campaign will not be able to find the email address field and update the records appropriately. The email address field also needs to be in both the original and Write-Back tables.

One-to-One relationship:

Response Table

When using complex

SQL

Statements, the write backs, bounce, unsubscribe, click through and opened email tracking may take an inordinate amount of time to execute. Rather than executing the source SQL statement again, it may be beneficial to link to a separate table call that can execute the desired connections more quickly. If you see poor performance on write backs, you make elect to use a response table to help manage the email look ups.

•

Select the table where the email addresses are stored.

Select the email address field.

Select the unique ID field.

When any email address lookup occurs, it will simply call the source table, rather than execute the SQL statement again.

Bad Format Processing

Campaign will update the selected field in the original datasource table when an email with a bad format is identified.

1. On the Datasource tab select the Intermediate or Advanced Feature Set.

2. Check the box to Enable the Bad Email Format Handling.

3. Select the field to update from the drop down list.

4. Make sure the is enabled.

If you have non-standard characters in your email addresses leave this feature off to allow all your addresses to be sent to the

SMTP

server.

Compose Email Message

Compose Email Message

This is where you compose your actual email message. On this page you configure the email message headers, including the from, reply to, and return path email addresses. You also specify the subject line, include attachments, and can change the character set of the message.

To send both a Plain text and

HTML

message, simply compose both messages in the corresponding message edit area. When the email goes out, there will be a Plain text portion and an HTML portion. The recipient email client will determine which message to display. It is a good practice to ask when your subscribers sign up whether or not they can read HTML messages. If not, you can indicate that in your

database

and send those people a Plain text only message. Then for those who don’t know, or can read HTML, you can send the

Manage Email Campaigns two part message (just in case something changes and that option is suddenly taken away, you want them to be able to see the plain text).

•

To send a plain text only message, check the plain text only box.

If you would rather compose your HTML and plain text messages using a different editor and do not want to copy and paste the messages, you can browse to your message files using the Use Files for Message Bodies option.

•

To use files for message bodies, check the box and browse to where the files reside on the local campaign computer. Remote users will not have the ability to browse to a file on the server and you will need to use the

HTML and plain text editors instead.

Split testing a message allows you to determine which of two messages to determine which message gets a better response. You can change the subject line, the style of the message, or different calls to action. Split testing will allow you to set up two HTML and plain text messages, half of your list will receive message A, the other half message B. You will need a field in the database to indicate which message an individual received.

•

To enable split testing, check the box and then fill in both messages as

• necessary.

Select the field in the database to indicate which message that individual received.

Address Headers

Enter the email addresses you want to use for this email blast.

•

From Name, this is the name the recipient will see in the from line of their email client.

•

From Address, this is the address from whom the email is coming, if there

• is no From Name, the address will be shown in the recipient's from line.

Reply to, the Reply to address can be different than the from address.

When the recipient click reply in their email client, this is the address that

• is used.

CC email, if you want to copy someone on this message, enter the name here. This will send a copy of every email in your list to this address so beware. Recipients will be able to see who was copied.

•

BCC email, you can also blind carbon copy the email. Recipients will not be able to see who was copied using bcc, but this will send a copy of each email to the specified address. (This feature is useful if you need to archive each eamil that goes out, simply point the bcc to an address where those emails can be stored).

Enterprise Manual

•

Bounce email, this is also called the Return Path email and is where delivery failure notifications are sent. You can set up campaign to monitor this account to manage bounced eamils.

You can use merge fields in any of the address headers. For example, if each individual has a sales representative associated with them, the From Name and

From Address can be pulled out of the database dynamically.

So a field named "Sales_Rep" in the table can be pulled into the From Name field using a merge field:

{Sales_Rep}

The email address can also be pulled in dynamically:

{Sales_Rep_Address}

The Email Message

By default, Campaign sends a multi-part message containing both an HTML and a plain text portion. While you do not necessarily need to edit the plain text portion, we advise that you do use both parts. Some

spam

filters like to see both parts in a balanced message. The recipient's email client will determine which message to display, if the plain text portion is not filled out, some of your clients might get a blank message.

•

Enter a clear and concise subject line that induces the recipient to open the email message. The subject line is plain text and is uses regardless of whether the message is HTML or plain text.

•

Click

Edit HTML or

Use Template

the actual email message.

to get to the HTML editor and compose

•

Click

Edit Plain Text to edit the plain text message. If you compose your

HTML message first, you can pull in the text of the HTML message into the Plain Text editor to make minor modifications.

Attachments

On the Message tab select Fixed Attachments to attach from a file on the local computer or select Variable attachments to select a field from the table. The options will change depending on your selection.

Manage Email Campaigns

Attach Filename

1. Select Filename from the drop down menu

2. Browse to the file you want to attach

3. Repeat step 2 to attach multiple files

Everyone who receives an email will have the same

attachment

If you are logged in as a user that has attachment browsing disabled, you will not be able to browse to the file to attach. To disable attachment browsing for a specific user, check disable attachment browsing in the user details area.

Attach File from Field

1. Select File from Field from the drop down menu

2. Select the field in your table that contains the file path to the attachment for each record

Everybody can receive a different attachment using this method. You will need to ensure the field in your table is populated with the correct file or path.

Remember that attachments can reduce performance. If you have a 1 megabyte attachment, it will be attached to and sent with each email. We recommend that you create a hyperlink that points to the file on a web-server instead. This helps maintain email delivery performance, and the recipient of the email does not have to download the attachment; an important consideration for dial-up connections.

Other Features

If you elect to use split testing, select the field to update to identify which message was sent.

Enterprise Manual

Change the character set from the default, ISO-8859-1, which is Western

European, to any other character set you need. This affects the subject line and plain text messages primarily. Alternate character sets should also be configured properly in the HTML headers as well.

A Custom Header can also be added to the message. This is often used for deliverability tracking with services like Return Path. You can also change the priority of your email message here, but doing so may affect deliverability or trust with the recipients.

The custom header must be preceded with an X-, e.g.

X-Priority: 1

Auto line wrap can wrap the email lines at a set number of characters. This feature is only needed for sending to really old email clients and should not be necessary.

You can set up one or more standard email footers

with company information.

To attach a footer to all the emails going out, select a footer from the drop down list.

Merge Fields

The merge fields are the key to message personalization. In your message you can use merge fields to pull information from the

database

. For example, the merge field {First_Name} corresponding to the First_Name field in your database will pull the customers first name into that field when the message is sent to the

SMTP

server. To view the merge fields, click on the merge field list button located in the

HTML

editor toolbar. Make sure the cursor is in the message where you want the link to appear, then click Insert Merge field. You can also type the name of any field in the table surrounded by { } curly braces.

Database Merge Fields

Database merge fields are those that correspond to your source database.

{First_Name}

{Last_Name}

{Email}

{Company} etc.

To use the merge fields, simply copy them and paste them in the message body where you want the information to appear, “Dear {First_Name},”

Manage Email Campaigns

Built-in Merge Fields

Built-in merge fields are the same for all campaigns and consist of several merge fields necessary to execute the advanced features like click throughs and opened email tracking. If a feature is not activated, the built in merge field is displayed in

Red.

{UNSUBSCRIBEHYPERLINK}

{SUBSCRIBEHYPERLINK}

{ENCODEDUNIQUEID}

{UNIQUEID}

{CAMPAIGNID}

{CAMPAIGNNAME}

{FULLCAMPAIGNID} etc.

The built-in merge fields are in upper case so you can more easily identify them.

They also appear at the bottom of the list. To use the merge fields, simply copy them and paste them in the message body where you want the information to appear. “To be removed from the list, {UNSUBSCRIBEHYPERLINK}”

Edit HTML

Enterprise comes with a built-in, easy to use visual

HTML

editor. The comprehensive toolbar at the top of the page allows you to edit your HTML with simple word processor type commands. It also allows you to dig into the code and manage things on an even deeper level. There are several editing options on this page.

The default uses the built-in HTML editor, to paste in plain code, you can disable the visual editor.

In the toolbar, you can edit the HTML by clicking this button in the toolbar,

You can then copy and paste code from a third party HTML editor like

Dreamweaver or Frontpage.

Right mouse clicking in the message area allows you to manage several of the editor's tools as well.

Edit Plain Text

The plain text editor allows you to type your message. It will appear exactly as you type it allowing for the line wrapping of the recipient's email client.

Enterprise Manual

If you have an existing

HTML

message, you can click Import HTML to pull in the text version of your HTML message.

To use click throughs, use the base

URL

of your click through links in your message. For example the code of a typical hyperlink looks like this in HTML:

<a href="http://www.arialsoftware.com">Arial Software</a>

For a plain text link, you simply use the fully qualified URL http://www.arialsoftware.com

As long as that URL is set up in the Click Through tracking page, it will track in both the HTML and the plain text version of the link.

Use Template

You can pull down one of our basic templates that are included with the program.

You can also upload your own

HTML

templates and make those available to all users. To upload a template, save as either an HTML or HTM file and put it in the following directory:

C:\Program Files\CampaignEnterprise11\www\templates

Embedded images

that might be included need to be uploaded to the following folder:

C:\Program Files\CampaignEnterprise11\www\uploads

Once the images are uploaded to the upload folder, you can insert them using the insert image button in the HTML editor toolbar. Select the image from the file.

In most cases, web based images are preferable to embedded images.

Dynamic Content

This feature allows you to alter the content of the outbound email based on criteria met by each record in your

database

by using an immediate if statement or a case statement.

How the immediate if statement works

In the message body you would use the following immediate if statements: iif((<condition>),<true response>,<false response>)

Manage Email Campaigns

<condition> The condition must be delimited by brackets ( ) and you can use =, >, <, <=, >=, != as the operator

<true response> If the condition is true, this string is replaced

<false response> If the condition is false, this string is replaced

Here are some different uses available using the merge field scenario (notice the braces on each end):

=============================================================

======

String Literals

{iif((ID=22),"Yes the ID is 22","No the ID is not 22")}

=============================================================

======

Field Includes

{iif((ID=22),"{FIELD1}","{FIELD2}")}

=============================================================

======

File Includes

{iif((ID=22),"{FILE:C:\TRUETEXTFILE

.TXT

}","{FILE:C:\FALSETEXTFILE

.TXT}")}

Note: you can also use combinations:

{iif((SALES>0),"{SALES}","YOU HAVE NO SALES YET")}

=============================================================

======

Field with a NULL value

{iif((FirstName=""),"Customer","{FirstName}")}

If the FirstName field is null Customer will be displayed, if the FirstName field is not null the data in the field will be displayed. You can also use the alternate merge field formatting to place a value in the email message if the merge field is null for a record.

Enterprise Manual

You can only use one iif statement per email message.

How the case statement works

Case statements offer much more flexibility than the immediate if statements. If the field in the example above listed more organization types, you can use that information to send out even more dynamic information to each organization using the same email campaign.

Sample Table emailaddress firstname lastname orgtype [email protected] Jerry Macaroni 0 [email protected] Cheryl Montana 2

How to set up a Case Statement

The Case Statement uses the following syntax:

{CASE WHEN condition THEN response WHEN condition THEN response

WHEN condition THEN response ELSE THEN response END}

Condition: this is the value found in the field "occupation". You can use the following operands to compare fields in your database; =

(equals), > (greater than), >= (greater than or equal to), < (less than), <= (less than or equal to, <> (not equal to). The field may be a numeric, or character field. When comparing character strings you are limited to = and <>.

Response: this is the string that is placed in the message if the corresponding condition is true. This can be a text string or value, or another field in your database, or a path to a message file.

ELSE THEN: if none of the conditions specified are true, then you can enter a default text string or value, or another field in your database, or a path to a default type of message.

Examples:

Case Statement that Returns a String:

{CASE WHEN OrgType=1 THEN "yes, you are eligible for a discount." WHEN

OrgType=2 THEN "small businesses may or may not be eligible, please call."

ELSE THEN "sorry, you make too much money to get the discount." END}

In this case if the ID in any of the records in your database is equal to 1 the string

"yes, you are eligible for a discount" will appear in the email message. If the

OrgType is equal to 2, the string "small businesses may or may not be eligible,

Manage Email Campaigns please call." will appear in the message. In all other cases, the string "sorry, you make too much money to get the discount." will appear in the message.

"Dear Stephen, yes, you are eligible for a discount."

"Dear Cheryl, small businesses may or may not be eligible, please call."

"Dear Jerry, sorry, you make too much money to get the discount."

Case Statement that Returns a Field from the Database:

{CASE WHEN OrgType=1 THEN "{Field1}" WHEN OrgType=2 THEN "{Field2}"

ELSE THEN "{Field3}" END}

Field1 and Field2 are additional fields stored in your database table. In this case if the OrgType in any of the records is equal to 1 the value in the table for the field named Field1 will appear in the message. If the ID is equal to 2 then the value in the table for the field named Field2 will appear. In all other cases, the value in Field3 will appear in the message.

"Dear Stephen, the discount is 15%."

"Dear Cheryl, the discount is 10%."

"Dear Jerry, sorry, you still make too much money to get the discount."

Case Statement that Returns a File:

{CASE WHEN OrgType=1 THEN "{FILE:C:\messagefolder\OrgType1textfile.txt}"

WHEN OrgType=2 THEN "{FILE:C:\messagefolder\OrgType2textfile.txt}" ELSE

THEN "{FILE:C:\messagefolder\default.txt}" END}

In this case if the OrgType in any of the records in your database is equal to 1 then message contained in OrgType1textfile.txt will appear in the message. If the

OrgType is 2 the OrgType2textfile.txt will appear. In all other cases, the

OrgType2textfile.txt will appear in the message. Using this method you can change whole paragraphs on the fly or send entirely different messages to the people on your list.

It is possible to use a combination of the above methods to dynamically compose your messages. The statement could return a field for one response, and a file for another response in whatever combination works best. For example:

{CASE WHEN OrgType=1 THEN "{FILE:C:\messagefolder\ID22textfile.txt}"

WHEN OrgType=2 THEN "{Field2}" ELSE THEN "sorry, you make too much money to get the discount." END}

Different constraints can also be used in the same Case Statement, for example:

{CASE WHEN OrgType=1 THEN

"{FILE:C:\messagefolder\OrgType22textfile.txt}" WHEN Name=Cheryl THEN

{Field1} ELSE THEN "sorry, you make too much money to get the discount."

END}

Enterprise Manual

Keep in mind that if a record is true for both constraints, for example the OrgType equals 1 and the name does equal Cheryl, only the first constraint listed will merge into the message body. If you would like to place both types of information into the email message, you will need to use two different case statements.

Send Settings

The third major step in setting up a campaign is to determine the mail server you

will be sending through, this is done on the Send Settings page in the campaign edit screens

•

Select the

SMTP

Create a new

Connection from the list of existing connections or,

SMTP Connection

Test the connection to ensure that you can reach the selected server

Advanced Write Back Features

The write back feature records events that occur when Campaign Enterprise pulls the information from the

database

. Since it occurs at the beginning of the campaign generation process, the write backs occur on the source table, not the write back table. There are three types of write back events upon sending.

Write Back on Send

•

To record the number of times a record is sent an email, select a number field from the database, and select increment one

To count down from a set number, select a number field from the database and select decrement one

To update a date field with the current date, select a date field in the table and select set current date

To enter some value, text or numeric string, select set value, and enter the text or numeric string in the third column.

With the stored procedures enabled in the Campaign Configuration page, an insert statement can be used to write this information to a different table, for example:

To increment a field:

UPDATE Othertable SET UpdateField=UpdateField+1 WHERE UNIQUE

ID={UNIQUEID}

To set a date:

UPDATE Othertable SET UpdateDateFieldNow() WHERE ID={UNIQUEID}

You can now digitally sign outbound emails using either your digital certificate, or the receiver's certificate. Check the box for the method you wish to use.

Manage Email Campaigns

Click-Throughs

After you configure your web links in the compose message area, you are ready to make them trackable click-through links.

•

Enable the Click-Through feature.

Click Extract Links to pull all the

hyperlinks

out of the

HTML

message you created. The links and the display text or images are displayed in the list

• of click-throughs.

Select the top link and click Edit.

•

Activate the click-through.

•

Change the report label to make it more clear if necessary.

•

Select a field in the table to update, or

Enter a

stored procedure

write back to be executed when the link is clicked.

•

Click Save & Next to move to the next click-through and repeat for all the links you want to track. Links that are not activated will work, but they will not be tracked by Campaign.

•

When the entire list is done, click Save to return to the Click-

Through page.

If you refresh the HTML page and add a new link, you can retain the existing links and simply Extract Links again to pull down new links. If the message is completely new, click Delete Links first, then Extract the new links.

For this feature to work, Campaign must be associated with a

public IP

or domain name in the Admin Settings > Manage

Default Configuration area.

Conversion Events

Open Email Tracking

This feature allows you to track customers who open your email. It uses a small

1x1 pixel image request from the Campaign Enterprise server. This feature only works with

HTML

messages, there is no way to track opens on plain text messages.

To implement this feature, select a field in your

database

to update. (Make sure the name of the field is not OPEN as that is a reserved name on most databases).

When the message is sent, Campaign places the {OPENEDEMAILMARKER} merge field inside the body tags of your HTML message automatically. If the check box is turned off, the image marker will not be added.

Enterprise Manual

For this feature to work, Campaign must be associated with a

public IP

or domain name in the Admin Settings > Manage Default Configuration area.

Bounce-Backs

The Bounce email processing functionality allows the Campaign system to record when an email failed able to reach its destination, prompting a delivery failure notice by the server. Bounces may occur for many reasons including destination mail server outages, general Internet outages, full mailboxes, etc.

1. On the Bounce-backs page select the bounce field to update from the drop down list.

2. Select the soft bounce field to update from the drop down list if you would like to track soft bounces separately from hard bounces.

3. Select from the list of current bounce email accounts, or create a new

Email Account

4. Test the connection.

The bounce email address you specify in the create message page must correspond to the account settings you select.

Using SQL Statements and Stored Procedures

To use a

SQL

Statement or

Stored Procedure

with Bounce Email processing

make sure enable stored procedures is checked in the Default Campaign

Configuration

area.

Using a Bounce Email Processing SQL Statement

Original Database Source Table

ID EmailAddress FirstName LastName

1 [email protected] Joe Smith

2 [email protected] Betty Mass

3 [email protected] Tom Blank

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Bounce Email Processing include: {CAMPAIGNID}

{EMAILADDRESS} and {RESULTCODE}. This example tracks hard and soft bounces separately.

Sample Syntax:

Manage Email Campaigns

INSERT INTO HardBounceInfo

(CAMPAIGNID,EMAILADDRESS,Event,RequestType,ResultCode) VALUES

({CAMPAIGNID},'{EMAILADDRESS}','Bounce','Hard','{RESULTCODE}')

Sample Syntax:

INSERT INTO SoftBounceInfo

(CAMPAIGNID,EMAILADDRESS,Event,RequestType,ResultCode) VALUES

({CAMPAIGNID},'{EMAILADDRESS}','Bounce','Soft','{RESULTCODE}')

HardBounceInfo Table - Before Joe Smith and Tom Blank record as hard bounces because those email addresses do not exist at yourdomain.com.

CAMPAIGNID EMAILADDRESS Event RequestType ResultCode

SoftBounceInfo Table - Before Betty Mass records as a soft bounce because email account is full.

CAMPAIGNID EMAILADDRESS Event RequestType ResultCode

HardBounceInfo Table - After Joe Smith and Tom Blank record as hard bounces because those email addresses do not exist at yourdomain.com.

CAMPAIGNID EMAILADDRESS

SoftBounceInfo Table - After Betty Mass records as a soft bounce because her email account is full.

CAMPAIGNID EMAILADDRESS

9 [email protected] Bounce Soft 4.11

The Result Codes are returned by your

SMTP

server, to find out what each result code means you will need to consult the documentation for your SMTP server, usually a code starting with a 5 is a hard bounce and a 4 is a soft bounce.

If you want to write back the hard and soft bounce information to the same table, then just change the table name in the Soft Bounce insert state to match the name in the Hard Bounce insert statement. If you want to track hard and soft bounces as a generic bounce, and not record if it was a hard of soft bounce, use the following insert statement for the hard and soft bounce stored procedures.

Sample Syntax:

Enterprise Manual

INSERT INTO BounceInfo (CAMPAIGNID,EMAILADDRESS,Event,RequestType)

VALUES ({CAMPAIGNID},'{EMAILADDRESS}','Bounce')

Bounce Email Processing Stored Procedure

To run a stored procedure each time a bounce is recorded, create the stored procedure on the

database

, then execute the stored procedure from the stored procedure field.

Sample Syntax:

EXECUTE

name '{EMAILADDRESS}'

Using Stored Procedures or SQL Statements is an advanced feature that should only be implemented by database administrators. Writing your stored procedure or SQL statement is outside the scope of Arial Software support.

WARNING: Do not use a personal email account for bounces, campaign reads the emails then DELETES them. Campaign will delete all emails in the account once processed.

Bounce Accounts:

In order for the bounce handling feature to work properly you will need to create a separate bounce account for each database table to which you will be connecting. If you have two separate projects, with two distinct tables, listening to the same account, you will not get accurate bounce reporting. The first project may remove any bounced email it does not recognize from the POP account, even though they may be valid for the second project. By having a separate bounce account for each table you can eliminate this potential problem.

If you no longer wish to access the bounce account for a particular project, make sure you disable the checkbox for Bounce-Back Processing.

If you are sending several projects using the same database, all bounces will be recorded back to the database regardless from which project the email originated. Bounced emails could easily be identified and cleaned up or filtered out for subsequent projects. (You can set up a bounce account for each project if you wish to track that information).

Also make sure that all your response handling accounts are different, for example do not use the same account to handle bounces as you would for email unsubscribes.

Manage Email Campaigns

For additional information on managing bounces more effectively, read about Variable Envelope Return Paths .

Unsubscribe

When sending permission based email campaigns it is imperative to honor unsubscribe or removal requests within ten days of receiving the request.

Enterprise helps you do that using either an email based unsubscribe or web based unsubscribe process.

You will need to have a field in your

database

that Enterprise can update when an unsubscribe request occurs. In the datasource page, a filter should be set against this field to ensure that only those subscribers who have not requested removal from the list receive an email.

Email-Based

The Email-Based Unsubscribe feature allows the recipient to unsubscribe using an email response.

from the list, or add a new one.

Using SQL Statements and Stored Procedures

To use a

SQL

Statement or

Stored Procedure

with Email-Based Unsubscribe processing make sure enable stored procedures is checked in the Default

Campaign Configuration area.

Email-Based Unsubscribe SQL Statement

Original Database Source Table

ID EmailAddress FirstName LastName

1 [email protected] Bob Smith

2 [email protected] Jane Hooper

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Email-Based Unsubscribes include: {CAMPAIGNID},

{UNIQUEID}, and {EMAILADDRESS}.

Enterprise Manual

Sample Syntax:

INSERT INTO EmailBasedUnsubInfo

(CAMPAIGNID,UNIQUEID,Event,RequestType,EMAILADDRESS) VALUES

({CAMPAIGNID},{UNIQUEID},'Unsubscribe','Email','{EMAILADDRESS}')

EmailBasedUnsubInfo Table - Before Bob Smith has unsubscribed via the email-based method.

CAMPAIGNID UNIQUEID Event RequestType EMAILADDRESS

EmailBasedUnsubInfo Table - After Bob Smith unsubscribed from campaign number 2, via the email-based method.

CAMPAIGNID UNIQUEID Event RequestType EMAILADDRESS

Email-Based Unsubscribe Stored Procedure

To run a stored procedure each time an unsubscribe is recorded, create the stored procedure on the database, then execute the stored procedure from the stored procedure field.

WARNING: Do not use a personal email account for unsubscribes, campaign reads the emails then DELETES them. Campaign will delete all emails in the account once processed.

Manage Email Campaigns

Campaign does not automatically remove email records marked unsubscribe from your database. You can use the information that is provided to write a script to remove them, or simply filter them out of all subsequent campaigns.

Web-Based

Select web-based unsubscribe in the unsubscribe method field to switch from email unsubscribe. The web-based method requires that Campaign Enterprise be configured with a

public IP

and access to the Campaign Enterprise Server on some

port

, the default being port 81. If click through or opened email processing is configured already, then web-based unsubscribe is all ready to use.

•

1. Enter text in the Custom Confirmation text box, or use the default information provided, this will be displayed when the recipient clicks on the unsubscribe link.

2. Include the {YES} merge field in the confirmation text box. The yes merge field will be where they confirm the unsubscribe request. You can also use the {HREF} merge field in place of the {YES} merge field to create a customized link for the unsubscriber to click. For example if you want the person who is unsubscribing to click on a link that says "Please unsubscribe me", you would use the following HREF merge field,

<href="{HREF}">Please unsubscribe me</a>.

3. Enter the Yes button destination URL for the confirmation page, this is the page the person unsubscribing will be taken to when they confirm their opt-out request, you can use the default provided, or specify a different webpage (if you use a different page make sure you use the

fully qualified

URL

4. You can include other merge fields on the unsubscribe tab to personalize the unsubscribe message.

5. On the Message Tab, place the {UNSUBSCRIBEHYPERLINK} in the message body where you want the unsubscribe link to appear.

Using SQL Statements and Stored Procedures

To use a SQL Statement or Stored Procedure with Web-Based Unsubscribe processing make sure enable stored procedures is checked in the Default

Campaign Configuration area.

Web-Based Unsubscribe SQL Statement

Original Database Source Table

ID EmailAddress FirstName LastName

Enterprise Manual

1 [email protected] Bob

2 [email protected] Jane

Smith

Hooper

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Web-Based Unsubscribes include: {CAMPAIGNID},

{UNIQUEID}, {EMAILADDRESS}, and {REMOTEADDRESS}.

Sample Syntax:

INSERT INTO WebBasedUnsubInfo

(CAMPAIGNID,UNIQUEID,Event,RequestType,REMOTEADDRESS,EMAILADDRE

SS) VALUES

({CAMPAIGNID},{UNIQUEID},'Unsubscribe','Web','{REMOTEADDRESS}','{EMAI

LADDRESS}')

WebBasedUnsubInfo Table - Before Bob Smith or Jane Hooper have unsubscribed via the web-based method.

CAMPAIGNID UNIQUEID Event RequestType REMOTEADDRESS EMAILADDRESS

WebBasedUnsubInfo Table - After Bob Smith unsubscribes from campaign number 7 and Jane Hooper unsubscribes from campaign number 5, both via the web-based method.

CAMPAIGNID UNIQUEID Event RequestType REMOTEADDRESS EMAILADDR

Web-Based Unsubscribe Stored Procedure

To run a stored procedure each time an unsubscribe is recorded, create the stored procedure on the database, then execute the stored procedure from the stored procedure field.

Campaign does not automatically remove email records marked as unsubscribes from your database. You can use the information that is provided to write a script to remove them, or simply filter them out of all subsequent campaigns.

Manage Email Campaigns

The {YESBUTTON} merge field will still work in the Confirmation Webpage, it has been replaced by the {YES} merge field.

A good way to take advantage of viral email marketing is to invite people who may have received the message that is forwarded from a friend to sign up for the newsletter or email publication themselves. Using the subscribe feature, someone can sign up for the list if they are not already. You can also use it to introduce your subscribers to a new list.

The Subscribe feature allows the recipient to subscribe to the newsletters you are sending out.

1. Select the table to which you want to write back the

subscriber

information.

2. Enter the name of the email address field in the table to which you are writing back.

3. Enter the Subscribe Hyperlink text, this is text that will be displayed in your email message.

4. Configure the Subscribe Form to work with the fields in your

database

You will need to change the Input name for the form fields to match the names of the fields in your database. For example if you want to record the subscribers email address and the name of the email address field in your table is email, your

HTML

code for the email address text box would be, . You will need to change each input name for each text box to match the name of the field in the table you are inputting the information into. This form will then be served up by the software when a recipient clicks the subscribe hyperlink in their email message.

5. Enter text for the Subscribe Landing Page or use the default text provided.

This page will be displayed when the recipient clicks submit on the

Subscribe Form and their information is successfully added to the table you specified as a new record.

6. On the Create Message tab, make sure you place the

{SUBSCRIBEHYPERLINK} merge field in the HTML email message where you want it to appear:

You are receiving this letter as a subscriber to our website.<br> If you also wish to subscribe to the monthly newsletter, click on the following link: {SUBSCRIBEHYPERLINK}

Campaign merges the link text entered on the Subscribe tab into an anchor tag.

You are receiving this letter as a subscriber to our website.

Enterprise Manual

If you also wish to subscribe to the monthly newsletter, click on the following link: Click Here to Subscribe .

Here is the default HTML code for the Subscribe Form, note the field names in the table you are writing back to will need to match the "name" for each input field, in the example below the field names in the table would be Email,

First_Name, Last_Name, Company, and Phone.

<html>

<head>

<title>Subscribe Form</title>

</head>

<body>

Email Address<br>

First Name<br>

Last Name<br>

Company<br>

Phone # (Optional)</font></p>

<br>

</font></p>

</form>

</body>

</html>

Here is the default HTML code for the Subscribe Landing Page.

<html>

<head>

<title>Subscribe Confirmation</title>

</head>

<body>

<P><FONT color=#000099 size=3 face="Arial, Helvetica, sansserif"><STRONG>Thank

you! You have successfully subscribed.</STRONG></FONT></P>

</body>

</html>

Manage Email Campaigns

You can add additional fields to the default form or create your own form, just make sure the input name matches the field name in the table that has been selected to write back the subscriber information.

Misc. Settings

The miscellaneous settings section allows you to enhance the performance and reporting functions of Enterprise.

•

Check the clear counters after campaign box if you want the overview report to clear out data each time the campaign is run. If unchecked, the

• numbers in the overview will aggregate over the life of the campaign.

Check create success/fail logs if you are having trouble identifying emails

that appear to be failing.

•

Suppress summary logs if you do not want to log the activities of the campaign. This is highly recommended for repeating campaigns that run every few minutes to prevent logs from building up.

For very complex queries , you might want to check the box to turn off a

•

• message count. When disabled, when you click Run Campaign, you will not be able to see the number of emails that are meant to go out.

You can also turn off the merge field prescan. If you use nested merges you must leave this feature enabled.

If you are not using

embedded images

(recommended), you can disable the image prescan. This will speed delivery.

Summary Reports

A summary log file can be sent to up to three email addresses.

•

Enable the check box

Enter email addresses, separated by commas. These must be just normal email addresses, e.g. "[email protected]"

The summary report shows the following information on the campaign sending:

Campaign ID : 5

Campaign : Clever Campaign Name

Executed on : 1/15/2006 3:22:55 PM

Sending Email

Attempted sending : 15

Bad email addresses : 5

Empty Email Addresses : 0

Duplicate/skipped : 1

Enterprise Manual

Successfully sent : 10

Time completed : 1/15/2006 3:23:21 PM

Successful address file created:

C:\Program Files\CampaignEnterprise11\www\logs\CampaignID5-

Success-20060130152255

.TXT

Failed email address file created:

C:\Program Files\CampaignEnterprise11\www\logs\CampaignID5-

Failed-20060130152255.TXT

Emailed log file to: [email protected]

Response Log Method

The response log method determines what format the details of each report will be generated in. There are three options:

No Response Details - The counters for each report will be incremented but no information will be written to the details of any of the reports.

Record Email Addresses - Records the email address in the details of each report. For example the open tracking details report would show the following information for a record that has opened your

HTML

email message,

2/11/2006 4:36:59 PM [email protected]

Record Unique ID - Records the unique id in the details of each report.

For example the open tracking details report would show the following information for a record that has opened your HTML email message,

2/11/2005 4:45:16 PM UniqueID:1

Meaning the record where the Unique ID is 1, opened the email message.

Recording the unique id instead of the email address allows for faster processing of the writebacks to the

database

The default is to record email addresses to the report details.

Chain Campaign

You can have another campaign start sending when the current campaign is completed using the chaining option.

On the Miscellaneous tab select the Intermediate Feature Set

Select a campaign from the list of available campaigns.

On the main menu a campaign with another campaign chained to it, will have the chain symbol below the Campaign ID, so that you know running this campaign will also run another campaign. Hovering over the chain icon will display the name of chained campaign.

Manage Email Campaigns

Advanced Features

Pre and Post processing stored procedures. You can fire off a

stored procedure

in your database before or after the campaign is run. The stored procedure can be used to clean out bounced emails or however else you want to manipulate your data on the database. Simply enter the execute stored procedure statement. Statements may vary depending on your database.

Click Campaign Security to allow other users

or groups

to have read, edit, or run privileges.

Advanced Write Back Options

Campaign Enterprise allows

SQL

statements to manage your

database

using the advanced features; Open Tracking, Click-Through Tracking, Bounce Handling, and Unsubscribe Processing.

The built in fields which you can write back to a table using a SQL statement include:

{UNIQUEID} - The unique id of the email recipient, this field can only be used when working with Database Write Back During Sending, Click-Throughs,

Unsubscribes, and Opened Email Tracking.

{REMOTEADDRESS} - Collects the

IP address

of the email recipient, this field can only be used when working with Click-Throughs, Web-Based Unsubscribes, and Opened Email Tracking.

{EMAILADDRESS} - The email address of the email recipient, this field can be used with Database Write Back During Sending, Click-Through Tracking,

Opened Email Tracking, Bounce Email Processing, and Unsubscribe Processing.

{CAMPAIGNID} - The campaign id that is recording the Bounce, Click-Through,

Opened Email, or Unsubscribe requests and Database Write Back During

Sending.

{CLICKTHRUNUMBER} - The number assigned to the click through on which the email recipient is clicking.

{RESULTCODE} - The result code returned from a bounced email message, the code contains information on why the email address bounced.

{

URL

} - Records the destination url for the click through that was clicked on by the recipient.

{ABmessage} - Writes back a 1 for message A and 2 for message B, used for

Database Write Back During Sending.

You can insert additional data into an alternate table, other options include

DATE() to record the date/time of the last event (be sure to check your database help files for the correct syntax of databases keyword). You can update a string using a character type field, or write a specific number to a numeric type field, to assist you with enhancing the relevance of your recorded data. See the examples below for INSERT statement examples for each process that allows stored procedures.

Click-Through Tracking SQL Statement

On the Click-Through tab select the Advanced Feature set.

Using SQL Statements and Stored Procedures

Manage Email Campaigns

To use a SQL Statement or

Stored Procedure

with Click Through processing make sure enable stored procedures is checked in the Default Campaign

Configuration area, and select the Advanced Feature set.

Click-Through Tracking SQL Statement

On the Click-Through tab select the Advanced Feature set.

Original Database Source Table

ID EmailAddress FirstName LastName

1 [email protected] Bob Smith

2 [email protected] Jane Hooper

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Click-Throughs include: {CAMPAIGNID},{UNIQUEID},

{CLICKTHRUNUMBER}, {REMOTEADDRESS}, {EMAILADDRESS}, {URL}.

Sample Syntax:

INSERT INTO ClickThroughInfo

(CAMPAIGNID,UNIQUEID,Event,CLICKTHRUNUMBER,REMOTEADDRESS,E

MAILADDRESS, CTURL) VALUES ({CAMPAIGNID},

{UNIQUEID},'Click',{CLICKTHRUNUMBER},'{REMOTEADDRESS}','{EMAILADD

RESS}','{URL}')

ClickThroughInfo Table - Before Bob Smith or Jane Hooper have clicked on a click through.

CAMPAIGNID UNIQUEID Event CLICKTHRUNUMBER REMOTEADDRESS EMAILAD

ClickThroughInfo Table - After Bob Smith clicked on a click through number 1 from campaign number 7, and click through number 3 from campaign number 2, and Jane Hooper clicked on click through number 11 for campaign number 5.

Click-Through Tracking Stored Procedure

To run a stored procedure each time a click through is recorded, create the stored procedure on the database, then execute the stored procedure from the stored procedure field for open tracking.

Open Tracking SQL Statement

Original Database Source Table

ID EmailAddress FirstName LastName

1 [email protected] Bob Smith

2 [email protected] Jane Hooper

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Open Tracking include: {CAMPAIGNID},{UNIQUEID},

{REMOTEADDRESS} and {EMAILADDRESS}.

Sample Syntax:

INSERT INTO OpenTrackingInfo

(CAMPAIGNID,UNIQUEID,Event,REMOTEADDRESS,EMAILADDRESS)

VALUES

({CAMPAIGNID},{UNIQUEID},'Open','{REMOTEADDRESS}','{EMAILADDRESS}'

)

OpenTrackingInfo Table - Before Bob Smith or Jane Hooper have opened an

HTML

email.

CAMPAIGNID UNIQUEID Event REMOTEADDRESS EMAILADDRESS

OpenTrackingInfo Table - After Bob Smith opened an HTML email from campaign number 7, and from campaign number 2, and Jane Hooper opened an HTML email from campaign number 5.

CAMPAIGNID UNIQUEID Event REMOTEADDRESS EMAILADDRESS

Open Tracking Stored Procedure

To run a stored procedure each time a opened email is recorded, create the stored procedure on the database, then execute the stored procedure from the stored procedure field for open tracking.

Bounce Email Handling SQL Statement

Original Database Source Table

ID EmailAddress FirstName LastName

Manage Email Campaigns

1 [email protected] Joe Smith

2 [email protected] Betty Mass

3 [email protected] Tom Blank

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Bounce Email Processing include: {CAMPAIGNID} and {EMAILADDRESS}. This example tracks hard and soft bounces separately.

Sample Syntax:

INSERT INTO HardBounceInfo

(CAMPAIGNID,EMAILADDRESS,Event,RequestType,ResultCode) VALUES

({CAMPAIGNID},'{EMAILADDRESS}','Bounce','Hard','{RESULTCODE}')

Sample Syntax:

INSERT INTO SoftBounceInfo

(CAMPAIGNID,EMAILADDRESS,Event,RequestType,ResultCode) VALUES

({CAMPAIGNID},'{EMAILADDRESS}','Bounce','Soft','{RESULTCODE}')

HardBounceInfo Table - Before Joe Smith and Tom Blank record as hard bounces because those email addresses do not exist at yourdomain.com.

CAMPAIGNID EMAILADDRESS Event RequestType ResultCode

SoftBounceInfo Table - Before Betty Mass records as a soft bounce because email account is full.

CAMPAIGNID EMAILADDRESS Event RequestType ResultCode

HardBounceInfo Table - After Joe Smith and Tom Blank record as hard bounces because those email addresses do not exist at yourdomain.com.

CAMPAIGNID EMAILADDRESS

SoftBounceInfo Table - After Betty Mass records as a soft bounce because her email account is full.

CAMPAIGNID EMAILADDRESS

9 [email protected] Bounce Soft 4.1.2

If you want to write back the hard and soft bounce information to the same table, then just chance the table name in the Soft Bounce insert state to match the name in the Hard Bounce insert statement. If you want to track hard and soft

Enterprise Manual bounces as a generic bounce, and not record if it was a hard of soft bounce, use the following insert statement for the hard and soft bounce stored procedures.

Sample Syntax:

INSERT INTO BounceInfo

(CAMPAIGNID,EMAILADDRESS,Event,RequestType,ResultCode) VALUES

({CAMPAIGNID},'{EMAILADDRESS}','Bounce','{RESULTCODE}')

Bounce Email Handling Stored Procedure

To run a stored procedure each time a bounce is recorded, create the stored procedure on the database, then execute the stored procedure from the stored procedure field.

Web-Based Unsubscribe SQL Statement

Original Database Source Table

ID EmailAddress FirstName LastName

1 [email protected] Bob Smith

2 [email protected] Jane Hooper

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Web-Based Unsubscribes include:

{CAMPAIGNID},{UNIQUEID}, {EMAILADDRESS}, and {REMOTEADDRESS}.

Sample Syntax:

INSERT INTO WebBasedUnsubInfo

(CAMPAIGNID,UNIQUEID,Event,RequestType,REMOTEADDRESS,EMAILADD

RESS) VALUES

({CAMPAIGNID},{UNIQUEID},'Unsubscribe','Web','{REMOTEADDRESS}','{EMAI

LADDRESS}')

WebBasedUnsubInfo Table - Before Bob Smith or Jane Hooper have unsubscribed via the web-based method.

CAMPAIGNID UNIQUEID Event RequestType REMOTEADDRESS EMAILADDRESS

WebBasedUnsubInfo Table - After Bob Smith unsubscribes from campaign number 7 and Jane Hooper unsubscribes from campaign number 5, both via the web-based method.

CAMPAIGNID UNIQUEID Event RequestType REMOTEADDRESS EMAILADDR

Manage Email Campaigns

Web-Based Unsubscribe Stored Procedure

To run a stored procedure each time an unsubscribe is recorded, create the stored procedure on the database, then execute the stored procedure from the stored procedure field.

Email-Based Unsubscribe SQL Statement

Original Database Source Table

ID EmailAddress FirstName LastName

1 [email protected] Bob Smith

2 [email protected] Jane Hooper

To insert information into a new table use an insert statement, the built-in merge fields that can be used for Email-Based Unsubscribes include:

{CAMPAIGNID},{UNIQUEID}, and {EMAILADDRESS}.

Sample Syntax:

INSERT INTO EmailBasedUnsubInfo

(CAMPAIGNID,UNIQUEID,Event,RequestType,EMAILADDRESS) VALUES

({CAMPAIGNID},{UNIQUEID},'Unsubscribe','Email','{EMAILADDRESS}')

EmailBasedUnsubInfo Table - Before Bob Smith has unsubscribed via the email-based method.

CAMPAIGNID UNIQUEID Event RequestType EMAILADDRESS

EmailBasedUnsubInfo Table - After Bob Smith unsubscribed from campaign number 2, via the email-based method.

CAMPAIGNID UNIQUEID Event RequestType EMAILADDRESS

Email-Based Unsubscribe Stored Procedure

To run a stored procedure each time an unsubscribe is recorded, create the stored procedure on the database, then execute the stored procedure from the stored procedure field.

Writing all the advanced features back to the same table.

Enterprise Manual

If you were to write back all the above information to the same table, the table would look like this,

Database Write-Back During Sending SQL Statement

You can also use an advanced SQL Statement for database write-back during sending which is found on the Send Settings tab, you can write-back to a different table using this method.

Table you want to write-back to before the campaign is run:

UNIQUEID EmailSent

1 0

8 0

You can use an update statement to update this table.

Sample Syntax:

UPDATE dbo.TestWB SET EmailSent = EmailSent + 1 WHERE ID =

{UNIQUEID}

Table after you have sent an email to ID #1:

UNIQUEID EmailSent

1 1

8 0

Database Write-Back During Sending Stored Procedure

To run a stored procedure each time you want to write back for a specific record, create the stored procedure on the database, then execute the stored procedure from the stored procedure field.

The {UNIQUEID} field cannot be used with the SQL statements on the bounce processing tab, the unique id is not used during bounce processing, it is based on the email address field. The {REMOTEADDRESS} field cannot be used for email-based unsubscribe, or bounce email processing because the remote address is only recorded when the email recipient clicks on a click through, opens an HTML message, or unsubscribes via the web-based method.

Campaign Types

There are several different types of campaigns you might be running, depending on what your marketing objectives are. Here are some sample types of campaigns you might be interested in running. Several things should be included in all campaigns, primarily to comply with the federal law. You need to have an unsubscribe mechanism (except where noted), a

privacy policy

statement or a link to it, and the physical address of the company on whose behalf the email is sent.

•

Set Up Confirmation Campaign

Set Up Follow Up Email

Set Up Campaign Series

Set Up Confirmation Campaign

When somebody subscribes on your website to your newsletter, or whatever it is you are sending, it is a good practice to send a confirmation email. This ensures the user that they successfully subscribed to whatever it is they intended and prevents them from duplicating the process, thinking they did something incorrectly. You can also use this opportunity to confirm the subscription by creating a double opt-in process.

Set Up Tab

It is always a good practice to set up some sort of naming conventions for your campaigns. It should be something somewhat descriptive of what the campaign is meant to do. A good example might be "confirmation email" or something.

You may also want to set up a category, "confirmations" if you have several different types of confirmation emails going on.

Since this email will be run on a schedule, and will continually monitor new subscribers, it is not recommended that you enable the Run Authorization on these types of campaigns.

•

Enable the

database

write back, and click through tracking options.

•

Click on the Data source

page

•

Select Intermediate from the feature set selector menu

Connect to your database, find the correct table and select the email address and unique ID fields

•

In the basic filter, select the following:

•

Subscribe = 0

Unsubscribe = 0

Click preview to ensure the proper records are returned. The filter should only show records that are in the database, but have not yet been subscribed (or confirmed), and that have not yet unsubscribed.

Enterprise Manual

•

Click on the Create Message tab and create your welcome message:

Thank you {First_Name} for subscribing to our newsletter. Please confirm your subscription, {CLICKTHROUGH1}.

If you received this email in error simply disregard and you will not be

•

• included in our

subscriber

list.

Click on the Send Settings and enter the connection information

Select the Advanced feature set from the drop down

Enable the De-dupe on sending feature to ensure that each person only gets one confirmation email

Click on the Click through

page

Type the

URL

of a confirmation thank you page hosted on your website.

Type "confirm" in the click through text field

Select the "subscribe" field in your table to update, this field will be incremented by one when the subscriber confirms. Since the number is now 1 or greater, they will no longer show up in the filtered list on the

Datasource tab.

Click on the Writeback Tab

Select a field in your database to record the date the confirmation email was sent, "confirmation_date" for example.

Select "set current date" from the drop down menu

Enable the bad format processing

Select the "bad_format" field from your table to update. This feature allows you to weed out those people who just enter junk in the email address field.

Click Save changes and return to the Main Menu

Test the campaign to make sure it works.

Set the schedule to repeat every 5 minutes (or whatever interval you decide), this will ensure that shortly after someone subcribes, they will be detected by the filter you set up, and sent the confirmation email.

•

Since this email is going out so frequently, you may want to disable the log files for this campaign.

Since this is a confirmation email, you do not need to include an unsubscribe option since technically they are not yet fully confirmed. If you decide to include

an option to unsubscribe, make sure you enable the unsubscribe feature

and include the {UNSUBSCRIBEHYPERLINK} merge field in your confirmation message.

Set Up Follow Up Email

If somebody makes a purchase, or downloads something off your website, but is not yet a current customer, you can contact them with follow up information.

According to the CAN

SPAM

law, anybody with whom you have a legitimate business relationship is a legitimate customer to whom you can send emails. It is a good idea to follow up with customers who purchase goods from you, but not to

Manage Email Campaigns be annoying about it. You can also invite them to continue to send them updates if they so wish.

Set Up Tab

Name the campaign something pertinent to the use for which it is intended

"Download Follow-up" for example.

Do not enable the Run Authorization on this campaign since it will be a scheduled campaign.

•

Enable the Writeback tab, the Unsubscribe Tab and the Click Through

tracking page

•

Click on the Data source

page

Select Intermediate from the feature set selector menu

Connect to your

database

, find the correct table and select the email

• address and unique ID fields

In the basic filter, select the following:

Unsubscribe = 0

Bounce = 0

•

DownloadDate > mm/dd/yyyy

Click preview and verify that the records returned all records that show a download request after the specified date. (This field will need to be updated in your database by your download process).

Click on the Create Message tab and create your message:

Thank you {First_Name} for downloading our program. Please let us know how we might assist you further, etc. For more on our products please visit

{CLICKTHRU1}.

•

{UNSUBSCRIBEHYPERLINK}

{CLICKTHRU2}

Click on the Send Settings

page and enter the connection information

Select the Advanced feature set from the drop down

Enable the De-dupe on sending feature to ensure that each person only gets one email even if they are listed more than one time in the database

Click on the Click Through Tab. Set up click through one for your home page, or whatever page you want the customer to be directed. Enter your

privacy policy

for Click Through 2.

Pick a writeback option and select a field to update, it should be a numeric field with a default value of zero. When the follow up email is sent, this field will be incremented. If you have a series of campaigns this field can show you exactly how many follow emails have been sent, and when to send the next one.

Also select a Date field to update with the current date, "followup_date"

for example.

Enable the Bad Format checking to ensure that incorrect email addresses are excluded from the campaign.

Enterprise Manual

•

Click on the Unsubscribe page and configure. You can use either the

email or web based unsubscribe option, whichever is best for you. Since the customer may not be interested in your updates.

Set Up Campaign Series

A Sequential email messages or campaign series -- where recipients receive a series of two or more emails timed by specific send dates, usually with related messages -- can be set up with some simple campaign and

database

management. These are autoresponder-type campaigns, where someone signs up to receive a series of email newsletters or other information that you provide.

In your database table, create a field to update, which should be a numeric field with a default value of zero (0.) When someone subscribes to the series, they will start out at 0, and your campaign filter will look for the value of the field to determine which records to include. Upon sending, you would set that field to 1, either by incrementing the field, or specifying 1 as the value. This indicates that the first message in the series was sent. The second campaign in the series would do the same thing, but look for records where the value is already set at 1, the second campaign would then change the value to 2, etc.

Figure 1. Sequential Messaging Using Four Campaigns

This numeric field will be the focus of the filters on the Data source

page using

Campaign Enterprise. If you are just starting your series, nobody should be found in the filter for campaigns 2 through 4, which is fine. As the series moves along however, you will begin to populate the list with those who have started receiving the first messages, subsequently moving along the process until they receive all the messages in the series.

Manage Email Campaigns

To prevent the recipient from receiving all the campaigns at once, you chain them in reverse order. Then schedule the last campaign (campaign 4 in this example) to be sent out on a daily, weekly or monthly basis, depending on your series schedule. Since the fields will be incremented on sending, you’ll want to chain the campaigns in reverse order, so that the filters will pull the correct records from the database. If you ran the campaigns in forward order, a new

subscriber

would receive all the emails in the series, one right after the other. .

Edit Campaign

To edit an existing campaign:

Click once on the campaign to select.

Click the Edit button.

The project will open to the Message tab.

There are ten edit screens:

Campaign Settings

Data Source

Compose Email Message

Each screen allows you to save your changes and close the edit area or exit without saving. Changes made on one edit screen are saved when you click on the tab of another edit screen.

In the above example you could also double click on the campaign that you want to edit, instead of highlighting the campaign and clicking the edit icon.

Double clicking the item of focus as well as highlighting an item and clicking an icon will work throughout the software.

Copy Campaign

To copy a campaign:

Enterprise Manual

1. Click once on the campaign to highlight it

2. Click Copy to copy a campaign's entire configuration (minus the reports)

3. Enter a new name

4. Click Copy

5. The new (copied) campaign is highlighted on the main menu. Double click the new campaign or click Edit to open

Only an Admin user, the owner of a campaign, or a non-owner with read/edit privileges can copy a campaign.

Note Feature

To add notes to a campaign, single click the Notes icon at the top of the page, or next to the campaign name on the main menu.

1. Highlight a campaign and click the notes icon.

2. Enter a note, the note icon in the campaign list will turn yellow.

Reports

Click on the Reports icon to view the reports generated for each campaign. The summary reports count the given action since the last time the campaign was run and the cumulative count for the selected campaign. The log files are written in tab delimited format for easy conversion using your preferred report writing tool.

To view a report:

Click once on the campaign to select.

Manage Email Campaigns

Double click the Report to be viewed. The Log Detail report shows the raw data in a text file, whereas the Create PDF report is a graphical representative of the data for the campaign.

Overview Report

Opened Email Report

When transferring information from version 10 to version 11, you can transfer the Logs folder over to version 11, but reports will be generated only when the campaign is run in version 11. All the previous information from version 10 will be in the Logs folder brought over from version 10, but will not be displayed in the Reports area because of the new reporting method.

Overview Report

The Overview Report shows a summary of all of the advanced features plus the statistics on the latest sending for the selected campaign.

Campaign Overview

Shows the following:

Campaign Performance

Shows the following:

Bounce Summary

Unsubscribe Summary

Opened Emails

Manage Email Campaigns

Initial Number of Emails in the selected table

Final attempted total

Successfully sent (to the

SMTP

Server)

Failed (bad email formats)

Performance summary (messages per second)

Click-Through Counts

Shows the summary information for the Click-through links

Campaign Run Instances

Lists links to all of the summary log files for the selected campaign in descending order.

Create an Overview Report PDF

To create a PDF document from the Overview Report click the Create PDF button within the Overview Report.

A PDF document is created, which you can save or print.

Bounce Report

Bounce Summary

Enterprise Manual

The Bounce report shows the summary of hard and soft bounced emails for the campaign(s) using the account.

Click on Bounce Report in the Reports area to see the Hard and Soft

Bounce percentages for the campaign(s) using the bounce account specified for the campaign you are viewing the reports for, along with a graphical analysis of the campaigns bounces.

Bounce Logs

The Bounce Log file can be accessed by clicking Log Detail on the

Reports Menu or viewed directly in the Campaign Logs folder. The pathway on a typical installation is:

C:\Program Files\Campaign

Enterprise11\www\Logs\CampaignID0000001-Bounce .TXT

Connect To an Email List

The Bounce log contains the date and time the bounce was recorded and the original email address in a tab delimited format.

The Soft Bounce Log file can be accessed through the soft bounce summary or viewed directly in the Campaign Logs folder. The pathway on a typical installation is:

C:\Program Files\Campaign

Enterprise11\www\Logs\CampaignID0000001-SoftBounce.TXT.

The Soft Bounce log contains the date and time the soft bounce was recorded and the original email address in a tab delimited format.

Click-Through Tracking Report

Click-through Summary

The Click-through report shows the summary of click-throughs for the selected campaign, by click-through description. When clear counters is checked in the

Misc. Tab, the summary will show the number of click-throughs reported since the last sending and the cumulative total for the selected campaign.

Click on Click Through Report in the Reports area to see the click through percentages for each click through, along with a graphical analysis of the campaigns click throughs.

Enterprise Manual

Click-through Log

The Click-through Log file can be accessed by clicking Log Detail on the

Reports Menu or viewed directly in the Campaign Logs folder. The pathway on a typical installation is:

C:\Program Files\Campaign

Enterprise11\www\Logs\CampaignID0000001-ClickThrus .TXT

The Click-through log contains the date and time the click-through was recorded, the click-through number and the original email address in a tab delimited format.

Unsubscribe Report

Unsubscribe Summary

The Unsubscribe report shows the summary of unsubscribed email for the selected campaign. When clear counters is checked in the Misc. Settings Tab, the summary will show the number of unsubscribed emails reported since the last sending and the cumulative total for the selected campaign.

Click on Unsubscribe Report in the Reports area to see the Unsubscribe percentages for the campaign, along with a graphical analysis of the campaigns unsubscribes.

Connect To an Email List

Unsubscribe Log

The Unsubscribe Log file can be accessed by clicking Log Detail on the

Reports Menu or viewed directly in the Campaign Logs folder. The pathway on a typical installation is:

C:\Program Files\CampaignEnterprise11\www\Logs\CampaignID0000001-

Unsubscribe .TXT

The Unsubscribe log contains the date and time the unsubscribe was recorded and the original email address in a tab delimited format.

Export Subscribers

Click the Log Detail report to export the selected campaigns new subscribers to a text file.

The report shows the date and time the subscribe was record, the unique id of the original recipient of the email message, the email address of the new

subscriber

, and the subscribers

public <A

class=glossterm x-usepopup=#POPUP43214 x-popup-type=expanding href='javascript:TextPopup(this)' id=HotSpot43214>IP address.

If there is a value in the unique ID column it is related to the source email in which the subscribe link was clicked.

Opened Email Report

Opened Email Summary

The Opened Email report shows the summary of opened email for the selected campaign. When clear counters is checked on the Miscellaneous Tab, the summary will show the number of opened emails reported since the last sending and the cumulative total for the selected campaign.

Click on Opened Email Report in the Reports area to see the Opened

Email percentages for the campaign, along with a graphical analysis of the campaigns opened emails, and unique opened emails. Unique Opened

Emails represent 1 instance of a person who has opened the message more than once, whereas the total number of opened emails, counts all

Enterprise Manual the times a person may have opened the email message.

Opened Email Log

The Opened Email Log file can be accessed by clicking Log Detail on the

Reports Menu or viewed directly in the Campaign Logs folder. The pathway on a typical installation is:

C:\Program Files\Campaign

Enterprise11\www\Logs\CampaignID0000001-OpenedEmail .TXT

The Opened Email log contains the date and time the opened email was recorded and the original email address in a tab delimited format.

Log Files

Log files are generated each time a campaign is run. There are three ways to access the log files:

From the Main Menu click Reports > Overview Reports and scroll down to the bottom of the page. Links to the log files for this campaign are listed in descending order by date.

From the Main Menu click Reports > Log Files. All the log files are listed in Ascending order. You can use this page to delete log files from the logs folder.

Open Windows Explorer and browse to the Campaign Enterprise Logs file:

C:\Program Files\CampaignEnterprise11\www\logs\CampaignID0000001-

LogFile-2009013001017812 .TXT

Test Campaign

Click Test Campaign to send a sample message to the specified address. A

Return Path Address must be specified on the Create Message tab for the message to be sent. If you are using merge fields from the

database

in your email message, information from the first record in the table to which the campaign is connected, will be merged into the email message. Attachments are attached when sending a test campaign.

Enterprise Manual

Since the test message merges information from the first record in the database, if you run a campaign that uses Each advanced feature will be incremented for the first record in your table or query, not for the email address you are sending a test to. This is why we recommend including your own email address in the table for more accurate message testing.

Run Campaign

The Run button enables the user to manually run a campaign.

1. Click once on the campaign to select.

2. Click Run Campaign.

3. Verify that you want to run the campaign, and that the number of emails being sent is correct.

4. Click Preview Message to view the message you are sending out, merge fields will not merge in the preview area.

5. Click Yes to Run the campaign. Click No to cancel.

6. Click OK to return to the Main Menu.

You DO NOT need to click Run to send a scheduled campaign. If you click

Run the campaign will be sent immediately. However, the campaign will also run on its scheduled time unless the schedule is modified.

Resume Sending

To resume sending a campaign after it has been stopped during a previous run, you can click the Run Campaign icon; a warning message will appear,

Connect To an Email List

Resume Previous Run - Starts the campaign at the point where it left off previously.

Start New Run - Runs the entire campaign.

If you resume a previous run the summary report will look as follows,

Attempted sending : 96

Bad email addresses : 0

Empty Email Addresses : 0

Duplicate/skipped : 22

Successfully sent : 74

In the first send of the campaign 22 messages were sent, then the campaign was stopped, when it was resumed it sent 74 messages. In the final send the original send of 22 records are skipped.

The number of messages to be sent should always reflect the total number of records in the table or query that you are connecting to for the campaign you are running.

Schedule Campaign

The Scheduling feature in Campaign allows you to setup a time for the project to run. You can run projects one time or at a specified interval. The date and time is reset each time a scheduled project is run if an interval is specified.

To schedule a campaign, on the Main Menu click once to highlight the campaign, then click the Schedule button.

Scheduling a Campaign for a specific date.

To schedule a campaign to run on a specific date, click on the date you want to run the campaign.

Enterprise Manual

Enter the time you would like to run the campaign, and click Add.

The date box change colors and the time the campaign is going to run is displayed.

Click Close and the scheduled date and time will be displayed on the Main Menu.

To remove a scheduled date, click on the time the campaign is scheduled to go out, and click OK to delete the scheduled time.

Scheduling a Campaign to run on a short interval.

To schedule a campaign to run once every minute or once every hour, check the

Short Interval check box and enter the interval.

Scheduling a Campaign to run on a weekly or monthly interval.

To schedule a campaign to run once or more during the week check the day you would like the campaign to run on, and enter a time.

The next run date will appear on the Main Menu.

To schedule a campaign to run on the same day every month, check the Monthly check box, and enter the day and time. Keep in mind if you enter 31 for the day the campaign will not run during all twelve months.

Suspending a Scheduled Campaign

To suspend all scheduled events for a campaign click the Suspend Schedule check box at the bottom of the Campaign Schedule screen. The Schedule status on the Main Menu will show Suspended.

Connect To an Email List

You do not need to click Run

to send a scheduled campaign.

To set a Blackout Date

(or a date scheduled campaigns will not be run on, like Christmas Day) from the Main Menu click the Administration tab then the

Blackout Dates button. Campaigns that are scheduled to run on an interval will not be run on Blackout Dates.

If you need to stop Campaign from checking for scheduled campaigns, go to the

Server Manager window and Disable the Schedule Checking option. Once this feature is re-enabled any campaigns which have reached the scheduled time will be sent.

Connect To an Email List

Connect To A Database

Select the

database

type from the drop down menu:

•

If you are using database shortcuts, simply pick the shortcut name from

• the list for which you are approved.

If you select a built-in list, select the particular table you want to use from

• the drop down list.

If you select access

•

Click browse and find the pathway to your Access database

. A typical pathway may look like, C:\Documents and Settings\user\My

•

Documents\dbname.mdb.

Click Select to return to the datasource tab

If you select a different type of database, click browse and select the

DSN

connection from the list of System DSNs.

OWNER.ORACLETBL.FIELDS. (Oracle likes the tables to be in all caps).

Once you have successfully selected the table, the Email address is populated with the fields found in the selected table.

•

Select the email address field. This is the field in your database containing the email addresses.

•

Select the unique ID. This step is optional for now, but is important for the advanced features. If your email addresses are truly unique, you can use the email address field here.

To ensure that you are connecting ok, click on the Preview button

and examine the table. You can look at the other fields from the additional drop down menus

and clicking the Refresh button. Click Return to get back to the data source

tab.

Enterprise, you will see a warning message next to the total. Prior to sending, you will need to filter your list to only send the authorized number.

Connect To an Email List

ODBC Connection

When connecting to a database, if an

ODBC

Connection is selected, then a list of current System DSN (Datasource Name) entries will be displayed. When you select one of the DSN sources from the list, a DSN string appears in the

Datasource box. You may need to add other information to this connection string such as a username and password. Most ODBC Connection Datasource entries will look like the following:

DSN=MYDATASOURCE;UID=username;PWD=password;

You have the option of filling in the Datasource box manually without using the

Browse button.

System DSN entries can be added by going to the ODBC Administrator in the Control Panel.

OLE DB Connection

If you have a very large database or are using complex filters to coordinate your campaigns, we recommend that you use an

OLE DB

Sample OLE DB Connection Strings (variable portions are indicated in

RED )

MS Access

For Standard Security:

Provider=Microsoft.Jet.OLEDB.4.0;Data

Source= C :\\DatabasePath\\MmDatabase.mdb;

User Id= Username ;Password= Password ;

Using a Workgroup:

Enterprise Manual

Provider=Microsoft.Jet.OLEDB.4.0;Data

Source= C :\\DataBasePath\\mydb.mdb;Jet OLEDB:System

Database= System.mdw

;

MS SQL Server

For Standard Security:

Provider=sqloledb;Data Source= ServerName ;Initial

Catalog= DatabaseName ;

User Id= Username ;Password= Password ;

For Trusted Connection security: (Microsoft Windows NT integrated security):

Provider=sqloledb;Data Source= ServerName ;Initial

Catalog= DatabaseName ;Integrated Security=SSPI;);

To connect to a "Named Instance" (

SQL

Server 2000) you must to specify

Data Source=Server Name\Instance Name like in the following example:

Provider=sqloledb;Data Source= ServerName\InstanceName ;Initial

Catalog= DatabaseName ;

User Id= Username ;Password= Password ;

To connect with a SQL Server running on the same computer, you must to specify the keyword (local) in the Data Source like in the following example:

Provider=sqloledb;Data Source=(local);Initial

Catalog= DatabaseName ;User ID= Username ;Password= Password ;

To connect to SQL Server running on a remote computer ( via an

IP address

Provider=sqloledb;Network Library=DBMSSOCN;Data

Source= 90.1.1.1,1433 ; Initial Catalog= DatabaseName ;User

ID= Username ;Password= Password ;

Oracle

MSDAORA is the OLE DB Provider from Microsoft:

Provider=MSDAORA;Data Source= OracleDB ;User

Id= Username ;Password= Password ;

OraOLEDB is the OLE DB Provider from Oracle:

Provider=OraOLEDB.Oracle;Data Source= DatabaseName ;User

Id= Username ;Password= Password ;

MySql

You must get the syntax exactly correct. The 'yourdatabase' is the name of the database not the server name. This string will connect to the first

Tools > Data Sources (ODBC) and look at the Drivers tab. Track down the

MySQL driver. It must be installed to use the OLE DB connection. They are available from the internet for free.

driver={ mysql }; database= yourdatabase ;server= yourserver ;uid= username ;pwd= password ; option=16386;

Growing a List

List building through viral marketing is a new and important trend for mass email marketers. Adding new subscribers while engaging them with useful, exciting content is an ongoing challenge.

When an active

subscriber

passes your email message to a dozen or so friends, wouldn't it be great if some of those second-degree recipients also subscribed to your email newsletter? That's the essence of viral email marketing. If you notice your email messages are frequently forwarded because of unique and /or excellent content, you'll want to take advantage of this list growth opportunity.

Therefore offering viral customers a page where they can easily subscribe is essential to growing your email list.

Built-in subscription form

Campaign Enterprise can help you gather new subscribers with its built-in email

subscription form

. If done correctly, you can turn your regular email newsletters into an effective viral marketing email campaign.

Arial Software introduced the subscription form in Campaign Enterprise 10, replacing the old email-based subscribe feature, which was simply a confirmation email. With the new subscribe feature, anyone can click on the subscribe link in an email message, and add their email address, name, and other information to an email list.

This handy feature allows you to invite current subscribers to join to a separate newsletter they may not currently receive. It lets a person who received the email message from a friend subscribe himself or herself to your list, and the person who forwarded the email message can be indicated in the

database

. This feature also can be used as an opt-in confirmation for email contacts obtained from a tradeshow or convention, and can be a point where more contact information is obtained.

To use the subscribe feature, Campaign Enterprise must be configured with a

public <A

class=glossterm x-use-popup=#POPUP37487 x-popuptype=expanding href='javascript:TextPopup(this)' id=HotSpot37487>IP address or domain in the main configuration area. If click through tracking or opened email tracking is enabled and working properly, everything should be all set to use the subscribe feature.

Configuring the subscribe feature

On the Setup Campaign tab in the campaign edit screen, check the box next to the Subscribe Processing feature to enable. The Subscribe tab will appear.

Campaign Enterprise requires that the campaign be connected to a table before

Connect To an Email List editing the Subscribe tab. Once the source table, email address and unique ID are selected in the Datasource tab, you can edit the Subscribe tab.

At the top of the Subscribe tab, select the table to which records will be added. It

does not have to be the same as the source table specified in the Data source

page, but it does need to be a table in the same database. Once the table is selected, enter the name of the email address field for the specified table. As with all table and field names, there should be no spaces or special characters in the names.

Next, enter the hyperlink text for the subscribe link. This is the link on which the reader will click in order to open the subscription form. This can be a simple text invitation like "click to subscribe," or a web based image. When using an image, simply input the

HTML

image tag in the subscription text field. Make sure you include a "border =0" in the tag so there is no blue box around the image in the email message. Here is a sample image tag:

When the subscribe link or image is clicked, the server hosting Campaign

Enterprise serves the subscription page, which is why it is necessary to configure

Campaign Enterprise with a public IP address or domain name.

The code for the web form and the confirmation page are shown in the text areas at the bottom of the Subscribe tab. These are both fully configurable. You can preview how the pages look by enabling the editor, but modifications to the web form should occur in the HTML code directly. Campaign Enterprise offers a default form, which is a good starting point for those who are not familiar with web forms. The form is bare, and other elements need to be added to the page to brand it, and inform the person signing up more about what they are getting into. The web form must contain the merge field {Action} in the form post line:

The default form provides an email address field, first name, last name, company and phone number field available, but only the email address field is required.

The field names in the input types need to match the names of the fields the form is updating in the table. For example, if the email address field is

"email_address," then the input type must be "email_address." Any other modification of the form will work as long as the {Action} merge field is included.

A web designer should be consulted to make major changes to the form or submit button.

The confirmation page is also fully customizable and is served up by the

Campaign Enterprise server. Links on the confirmation page could lead the new subscriber to the index page, or other areas of your website.

Don't forget the subscribe link

In the message tab, ensure that the {SUBSCRIBEHYPERLINK} merge field is placed somewhere in the message body. When the email message is sent, the pertinent campaign information is merged in the link, including the unique id of the original recipient. This way the original referrer of the email can be tracked and noted when the new record is added to the selected table. Make sure you test everything out before including the subscribe link in a live email marketing campaign.

If there is a subscription page already on your website, you can track subscribers that reach it through an email message by setting up a click-through tracking link to that page.

With a little work, the content you provided to your subscribers can generate high interest and drive a viral campaign. Take advantage if your newsletter is getting passed around and make it easy for those who receive it subscribe for a copy themselves. This is a great way to build a solid email list with people who have already demonstrated an interest in what you offer.

Arial MySubscribe

Arial Software recently introduced a free email subscription widget that you can place on your website and invite people to subscribe. The widget can be configured here, http://www.arialsoftware.com/MySubscribePage.html

Databases

The

database

list of email records is the first link in the permission email chain.

A database is a program where your data is stored and managed. There are several types of databases available, MS Access, MS

SQL

Server, MySQL and

Oracle to name just a few. Campaign Enterprise can connect to any Open

Database Connectivity (

ODBC

) compliant database. This document will use the acronym ODBC when referring to the general types of databases.

Selecting the Right Database

The database to which you connect Campaign Enterprise may already be determined for you depending on where you work and what you have available.

Assuming there is a choice in determining where email records are stored, we will discuss the various options available beginning with the most basic to the more advanced. A relational database is required when using any of the advanced features of Campaign Enterprise.

Built-in Subscriber Lists

Text Files

Connect to a Mail Server

Oracle

Campaign works with any other database not specifically listed if it is

ODBC

compliant. To use a database file not listed above select ODBC Connection from the drop down list in Data Source Tab or Database Shortcuts .

Naming Conventions

Campaign follows standard Structured Query Language (SQL) naming conventions. Database, table, query and field names should not have spaces or special characters in them. Even though MS Access allows spaces and special characters, you should not use them. Special characters include (but are not limited to) !, @ ,#, $, %, &, - and + signs.

Database Fields

Many of the advanced features of Campaign require specific fields in your database in order to update information correctly. For example, in order for the bounce field in your database to increment when a bounce email enters the POP account, you need to make sure the bounce field is a number field, with a default value of zero.

Campaign also uses your field names for the mail merge functions. You can use any field in the table to which you are connected as a merge field. This will input the information found for each record corresponding to that field in the message.

This is how you personalize your emails with customer specific data. The format for merge fields is always {field_name}.

MS Access

MS Access is one of the most common and intuitive

database

applications available and is a great database to use with Campaign software. It is the only database for which Campaign does not require an

ODBC

connection. Since it is so common, we will address a few of the considerations that need to be made when configuring your Access database for use in your email campaigns. MS

Access must reside on the same computer as Campaign Enterprise.

Access is a good choice for you if you are just getting started with email marketing. The database can easily store several hundred thousand email addresses. However, if you are performing a lot of procedures on the data, updating many fields or using a lot of queries, the database can become large and cumbersome and will need to be compacted. After a couple hundred

Enterprise Manual thousand records, you might consider moving to a Structured Query Language

(

SQL

) option like MS SQL Server or MySQL.

Create a New Database and Table

MS Access is similar in form and function to most other Microsoft Office products, which includes an annoying and not very helpful office assistant. A variety of tools and wizards are available to help you create just the type of database you need. You may need to brush up on what a database is and what it can do, but to start out you will find Access to be more user friendly than most. To create a new database for use with Campaign, take the following simple steps:

•

Open MS Access

Click New

•

Select the Database Icon

•

Name the database and place it in an easily accessible folder. The default

• is usually My Documents.

Highlight "Create Table in Design View" and enter.

You are now in the design view of your first table. Here you will specify the field names and the data types of each field. You can add a description of the field for future reference if you like.

•

Type a field name for the first field. This should generally be your ID field, which uniquely identifies each record in your database.

•

Tab to the Data Type field and select "AutoNumber" from the drop down menu.

Note: The ID field should be your primary key. To set it as your primary key right mouse click on the black arrow to the left of the field where you entered the name and click "Primary Key", a key symbol will appear to the left of the field.

•

Enter a description of the field for future reference.

Repeat the steps for all the fields you want to include in your database. Select

"Text" datatype for all text fields and "Number" for all the numeric fields that

Campaign will use to write-back to. For the number fields go to the Field

Properties area and ensure that there is a default value of zero indicated.

Here are some examples of fields you might want to include in your table.

Text Fields Numeric Fields with a default value of "0" (zero)

Email_Address Bounce

First_Name Unsubscribe

Last_Name Bad_Email_Format

Address Click_1

City Click_2

State Click_3

Zip Click_4

Connect to a Mail Server

You can add any other field you want to the database, but make sure you follow

Structured Query Language (SQL) naming conventions. Even though Access allows it, you should not use spaces or special characters, including hyphens, in any database filename, table name or field name. Having spaces or special characters in any of those names may cause problems when Campaign attempts to update the database using the advanced write-back feature.

•

Click Save

Name the table (remember no spaces or special characters)

•

Click View > DataSheet View (to get back to design view, click View >

•

Design View).

Start entering the information into your database. As you complete each record you will note that the ID field is automatically incremented to give each record a unique ID. If a record is deleted, the ID for that record will no longer be found in the table.

Adding new records does not require you to save. The only changes to the database that need to be saved are modifications to the table design. Access will not let you modify the table design without prompting you to save your changes.

Using an Existing Record Set

You may already have a large list of email addresses or client information you would like to use with Campaign. If it is in an Excel Spreadsheet or some

Personal Information Manager (PIM) you will need to import your records into

Access. Microsoft has a helpful wizard that allows you to easily import records from most external sources.

Import Records Into Access

•

Open the Database and click New

•

Select Import Table

Click OK and browse for the file you want to import. You will need to select the file type in the browse window.

Follow the instructions in the wizard to import your records to a new table.

Once the new table is built, you can go to the design view to add any new fields you need for the database write-back features.

Enterprise Manual

•

Select the new table and click View > Design View

Add any new fields you need as explained above.

A Microsoft Access database template is available at http://www.arialsoftware.com/downloads/Campaign_Template.mdb

MS SQL Server

SQL

Server

database

is more scaleable and more robust than MS Access database. Once you reach the practical limits of MS Access you may find yourself moving to SQL Server. It is by far the most popular database for

Windows operating systems. Advanced SQL Server administrators will likely not find this article helpful, it is geared more toward someone who is considering moving from a less advanced database to SQL Server.

SQL Server is a very powerful database application and a great database to use with Campaign Enterprise software. In order to connect to a SQL Server database, an

ODBC

OLE DB

connection must be established. We will address a few of the considerations that need to be made when configuring your

SQL database for use in your email campaigns.

Creating a New Database and Table

Speak to your Database Administrator about creating a database; and tables within that database. Arial Software can only make suggestions on what fields to include in your new table and their properties.

In order to use the click-thru tracking, bounce handling, subscribe and unsubscribe features with in Enterprise, your table must contain integer type fields with a default value of zero.

Suggested fields:

100

Connect to a Mail Server

•

Message_sent: Type integer, default value of 0. This field will increment upon sending. The table will indicate who was sent a message

Bounce: Type integer, default value of 0. This field will increment when a bounced email is recorded.

Unsubscribe: Type integer, default value of 0. This field will increment when an unsubscribe email, or click-thru is recorded.

Subscribe: Type integer, default value of 0. This field will increment when a subscribe email, or click-thru is recorded.. bad_format: Type integer, default value of 0. Upon sending, Campaign can filter out email addresses that have incorrect formating (illegal characters, empty records, spaces etc.). When bad format emails are identified, this field will increment.

Sent_date: Type Datetime, default any date. Upon sending, this field will be updated with current date. click_1: Type integer, default value of 0. This field will increment when

Campaign records a click-thru for Click-Thru 1. click_2: Type integer, default value of 0. This field will increment when

Campaign records a click-thru for Click-Thru 2 click_3 - click_10: Type integer, default value of 0. These fields will increment when Campaign records a click-thru for Click-Thru 3 - 10.

MySQL

101

Enterprise Manual

MySQL is another open source

database

frequently used by email marketers.

Here are some general guidelines for MySQL default integer fields (50) no zero fill, not auto, no default - works

Id field wont work if it is auto - error 'cant find row to update'

Text field will not work for the email address field, should be varchar

Provider=MySQLProv;Server=10.10.35.100;DB=campaign;UID=root;PWD=; datetime datatype doesn't work.v.3.23.29 - change the datatype to varchar and it writes back. Even leaving that field in the table but not writing back to it, will break it. 3/15/07 used date datatype and could send. Pre-populated it with 00-00-

0000. Did not test write back.

On large email lists - you must have a big enough KeyBuffer so that the entire appropriate index fits into memory. This goes along with indexing appropriate fields. Assuming the Unique ID is PK so already indexed, email address field, and field used as a merge field in the message., write back fields.

The driver now available on the internet requires advanced feature set selector on the data source page. The fields have to be listed in the

SQL

SELECT statement, the * no longer works. Also, I tried the auto feature and it worked but I did not try write back with it.

If using a select statement that does not explicitly use the JOIN keyword, the query will take a long time to run. Do not try to JOIN two tables with the WHERE clause there must be a JOIN keyword in the SELECT before the WHERE clause.

Otherwise, Campaign will run the entire record set of the two tables and run the where clause against that record set.

How to connect to a MySQL database without using a Data Source Name (DSN).

MySQL

OLE DB

(DSNless) connection: driver={mysql}; database=databasename;server=serverip;uid=username;pwd=password;option=

16386;

The syntax must be exact. Use the

IP address

in place of 'serverip'. The

'databasename' is the name of the database not the server name.

This string will connect to the first MySQL Server running. If there are multiple server options, you will need to inquire how to make the string work with the server to which you are connecting.

Make sure you know the login information to the database and enter that in place of username and password.

102

Connect to a Mail Server

Replace 'mysql' with the exact name of the MySQL driver installed on the computer on which Campaign Enterprise resides.

To find the name of the driver go to: Control Panel > Administrative Tools > Data

Sources (

ODBC

) and look at the Drivers tab. Track down the MySQL driver that is installed.

Example: MySQL ODBC 3.51 Driver. A driver must be installed in order to use it.

Drivers are available from the internet free. http://www.basic-ultradev.com/articles/ADOConnections/ http://dev.mysql.com/doc/refman/5.1/en/connection-parameters.html

Text Files

Setting up a Text List

Text files cover

.txt

and

.csv

flat files. These types of files must be in a certain format in order to be useful to Campaign Enterprise. CSV stands for comma separated value and is basically what you want to consider when creating your text file. There must be a header row, with field names separated by commas.

Records are separated by carriage return line feeds or CRLF (which is where you end your line of text and click return).

Cost wise, text and csv files are virtually free everything is available in a typical

Windows installation. The problem is these types of files are not very flexible. If you are considering using the more advanced features of Campaign Enterprise, you will need to use a relational

database

, which can be updated. Text and csv files are not updateable and are therefore very limited in their usefulness.

Simple Text data source (.txt)

Open your text file, and enter the name of "column" on the first line followed by an email address line by line. You need to specify a column name or the first email in the list will become the column name. email_address [email protected] [email protected] [email protected] [email protected] etc . . .

Complex Text Data Source (.txt, .csv)

103

Enterprise Manual

Open your text file and enter the name of each column. You can use these field names to customize your message using the merge function. (Note: each column must be surrounded by double quotes and separated by a comma, e.g. " " , " ").

Enter the email, first name, last name, and any other column name you want to use for each record. (Note: Do not try to line the records up under the column headings, tabs and spaces will render the table useless).

"email_address","first_name","last_name"

"[email protected]","first","last"

"[email protected]","first","last" etc . . .

Text ODBC

Simply browsing to a text file in the Datasource tab will not work in Campaign

Enterprise, you need to set up a text

ODBC

Datasource Name (

DSN

) to connect to the file.

Go to your Database connection utility. On most Windows Operating Systems this can be found in the Control Panel > Administrative Tools > Data Sources.

•

In the System DSN tab, click Add

104

Connect to a Mail Server

•

Select the Microsoft Text Driver (*.txt *.csv) option

Click Finish

•

Enter a name for the DSN, use something that you will remember

Enter a description (optional)

Uncheck the Use Current Directory check box

Click Select Directory

105

Enterprise Manual

•

Browse for the folder where your text datasources reside. Make sure you include the .txt and .csv extensions

Click OK

When you are ready to connect to your .txt or .csv file, go the Datasource Tab in the campaign edit screen and do the following.

•

Select Text File from the database type drop-down field

•

Click Browse

•

Select the new DSN you just created

•

Select the file from the table/query drop-down field; all available files from the folder you set will be included

•

Select the email address field

A text file cannot be written back to. If you intend to track bounces, opens, unsubscribes or click-throughs you must use a relational database, not a .txt or .csv file.

Subscriber Lists

Campaign Enterprise now comes with some simple built-in tables you can use if you do not have your own

database

To access, click the Subscribe Lists link at the top of the Main Menu.

New List

1. Click the New Icon

2. Name the list and click create, you will not be permitted to put spaces in the name

3. Enter information adding them one at a time, or by importing.

Add New Subscribers

1. Click the New Icon

2. Enter the information you want to save starting with the email address, this is the only required field

3. Click New to save the current record and move to adding another

4. When finished adding names, click Save

Import Subscribers

1. Edit the list

2. Click Import Subscribers

3. Browse to the

.txt

.csv

file and select

4. Match the fields in the source list to the fields in the subscriber list

106

Connect to a Mail Server

5. Click Import

The .txt and .csv source file must be in comma separated format.

Other Databases

Oracle

When using a basic connection to an Oracle

database

, the table/query string on the Datasource Tab converts from a drop down menu, to a text field. You have to type the name of the table to which you want to connect. If the table is inside a schema on your database, you may need to specify the schema as well. For example: schemaname.tablename.

When connecting to an Oracle database the email address field should be a

CHAR field type.

The unique ID needs to be NUMBER field type.

DBF Databases

There are many types of databases that fall into the Database Format (DBF) category. FoxPro , DBIII, DBIV etc. These types are not as flexible as a

SQL

type database, or even as and Access database. Like Access, these files must reside on the same computer as Campaign Enterprise you cannot connect to them using across networks. DBF files also require a

DSN

set up using an

ODBC

driver. Typically these drivers are included with Microsoft Data Access

Components (MDAC), which is part of the operating system. Occasionally, a newer or better driver may need to be downloaded to optimize performance with these databases. These databases are only recommended if those are the only options available to you because of your corporate environment.

Filemaker

Follow these steps in order to user a Filemaker database with Campaign

Enterprise.

Sharing Filemaker

Filemaker needs to be opened and shared. If you are using the write-back features, Filemaker will need to remain open until your are satisfied that your project is complete, including recording click throughs,and opened email tracking.

1. Open the database

2. Click File > Sharing

3. Check Multi-User (ensure that the file is being shared by 'TCP/IP')

107

Enterprise Manual

4. Check Local Data Access Companion

5. Click OK

If the connection is not 'TCP/IP'

1. Click Edit > Preferences > Application

2. In the General tab, select TCP/IP from the drop down box

3. Click OK

Campaign can now access and write back to your Filemaker Database using an

ODBC connection. Connecting to a Filemaker Database does not work when

Campaign Enterprise is run as a

service

, you must run Campaign Enterprise in application mode.

Setting-up Filemaker Database Fields

1. Enter the ID field name

2. Select the Number type

3. Click Create

4. Click Options

5. Check the serial number box and start the count (next number) at any number you choose and increment by 1.

6. Click OK

Enter the other fields for your database in the same manner. These should at least include an email address field and a first and last name field.

Some other fields you may need if you use the database write back features: bounce unsubscribe subscribe date_sent click_thru_1 opened_email etc.

Visual FoxPro

Connections strings for Visual FoxPro (The Visual FoxPro Driver needs to be installed on the computer):

With a database container

*************************

Driver={Microsoft Visual FoxPro

Driver};SourceType=DBC;SourceDB=c:\somepath\mySourceDb.dbc;Exclusive=N o

108

Connect to a Mail Server

Without a database container (Free Table Directory)

***************************************************

Driver={Microsoft Visual FoxPro

Driver};SourceType=DBF;SourceDB=c:\somepath\mySourceDbFolder;Exclusive

=No

Connect to a Mail Server

The

SMTP

server is the third link in the chain of permission email marketing.

Campaign Enterprise connects to your

database

list of email addresses on one end, creates a personalized message, then delivers them to the SMTP server, which will deliver the final email to the remote mail addresses.

Selecting the Right SMTP Server

There are many varieties of Mail servers using different sending protocols. The only protocol used by Campaign Enterprise is Simple Mail Transfer Protocol

(SMTP). Therefore the primary consideration when selecting a mail server for use with Campaign Enterprise is that it is capable of communicating using SMTP.

Most mail servers are capable of communicating with SMTP, but it may not be the default configuration and may need to be enabled. Please refer to your mail server documentation to determine how to enable SMTP if it is not already configured.

SMTP Servers

Windows Based Servers

Campaign Enterprise only runs on Windows Operating systems, therefore it makes sense that somewhere in your network, you will have access to a

Windows based mail server.

IIS (SMTP)

Internet Information Services (IIS) comes installed with Windows 2000, Windows

XP Professional and Windows 2003 Server operating systems. Inside IIS there is an

SMTP

component, which can be configured to deliver your email. If you want to separate your regular email processes from your Campaign Enterprise email marketing, this may be an option for you.

109

Enterprise Manual

MS Exchange Server

Microsoft Exchange Server is one of the most popular, and widely available type of server. It is capable of using several mail protocols including SMTP. It is possible to maintain a separate protocol for your regular in house email activities and while using SMTP for your Campaign Enterprise marketing email activities.

Allow Relaying for MS Exchange 2000

•

Open Exchange System Manager

•

Expand Servers > ServerName > Protocols > SMTP > Default SMTP

Virtual Server

•

Right mouse click and click on Properties

Click on the Access Tab

•

Click on Relay button

110

Troubleshooting

•

Select Only the list below

Click Add

Add the

IP address

of the Campaign computer

•

Click OK and step out of the Exchange System Manager

IceWarp Email Server

http://www.icewarp.com/products/icewarp_email_server_software/

Imail by Ipswitch

111

Enterprise Manual

Imail server is a highly configurable mail server with SMTP capabilities. http://www.imailserver.com/tour/imail/

Open Source SMTP Servers

While opens source SMTP servers are essentially free, they may cost more in configuration time and maintenance than a Windows based server. Most open source email servers also communicate with SMTP as at least one option of many protocols. We will just list a few options that work well with Campaign

Enterprise.

Sendmail

One of the first mail servers around, it is still widely used, and is compatible with

Campaign Enterprise. http://www.sendmail.org/

Qmail

Based on Sendmail, it makes some improvements to the code to make things easier to configure. http://www.qmail.org/top.

html

Dedicated Mail Servers

Port25 solutions

This server is highly recommended for extreme mail sending. Many of Arial’s top emailing companies use

Port

25 mail servers. http://www.port25.com/products/prod_index.html

Ironport server

http://www.ironport.com/products/

ISP Mail Servers

Often, mail servers are provided by an outside source like your Internet

Service

Provider (

ISP

). If you intend to use your ISP’s mail server, you will need to contact them to find out what sort of restrictions they have. Typically they will set up relaying in one of the manners listed above and provide you with the connection information. Typically, the larger the ISP, the less willing they are to work with you on sending your permission based email marketing campaigns.

CAN-SPAM Law

112

Troubleshooting

In 2002, Congress passed, and the President signed a bill that became the

CAN-

SPAM

law. This bill attempts to define spam, and set punishments for breaking the law. So far the best thing about the law is the provision overriding various state anti-spam laws that would have placed huge monetary and resource losses on legitimate email marketers.

Securing The Mail Server

In the past, mail server default configurations were rather light on security, defaulting to an Open Relaying configuration. However, with the increase in

SPAM

and other security concerns, default mail server configurations are more secure, not less. Campaign Enterprise can send email through a server that has open relaying, but so can any spammer that finds such a server on a public domain. Regardless of what mail server you use, it is imperative that you create a closed relaying system. Not only does this protect you from spammers using your server to send their email, it will ensure that your legitimate email makes it to the intended destination. Many remote mail servers check to see if the sending server is a closed system, and deny emails outright if it is not.

All reputable mail servers will have a section where you can specify who is able to send email through the server. There are several different layers that can be configured. We will go through generalities of how each of these processes work. For specific information, seek documentation on your particular mail server.

Relaying

Typically in the relaying section, you will have an area where you can add either the static

IP address

of the Campaign Enterprise computer, or a range of IP addresses on which Campaign Enterprise is installed. If your network uses

Dynamic IP assignments, you will want to add the entire range. It is better however to assign a static IP to your Campaign Enterprise computer to minimize potential complications. When the Campaign Enterprise computer connects to the

SMTP

server, it verifies that the IP address is listed, or is included in the specified ranges. If it is approved, the emails are accepted and delivered to the remote addresses. If not, an error message is generated indicating that relaying is denied. Please see the debugging section for more on connection issues.

Authentication

Another method of securing a mail server is by requiring the Campaign

Enterprise to authenticate with a username and password. Typically, in the relaying options there will be a place to enter usernames and passwords for authorized connections. This can be used with or without relaying enabled.

When the Campaign Enterprise connects, it indicates that it is going to try to authenticate. The SMTP server will then request the username and password

113

Enterprise Manual and verify that it is valid. Typically, authentication can occur on computers not explicitly listed on the list of approved relayers, but can also be used in conjunction with relaying for improved security.

SSL

An additional security measure is to only allow connection requests using the

Secure Socket Layer (

SSL

Other SMTP Considerations

When configuring your

SMTP

you need to also consider the following in order to ensure your email is delivered properly.

Domain Name Servers

In order to understand just how a mail server is supposed to tie to a particular domain as an approved mail exchange server, a high level understanding of the

Domain Name System and how it operates is helpful. Once you understand what the

DNS

is all about, it is easier to understand where your mail server fits in the grand scheme, and why it is so important to ensure that the servers are "wellbehaved."

What is the Domain Name System?

The Domain Name System (DNS) is a huge distributed

database

with the sole function of resolving domain names. With over 16 billion requests a day, this database works harder than any other anywhere in the world, and all it does is convert domain names to IP addresses. At the apex of the DNS are the 13 root servers, labeled A-M. These servers are located on 80 locations in 34 countries throughout the world, most of them outside the United States. Using Anycast technology, several servers can maintain one of the root servers authoritatively.

This type of redundancy helps manage all the domain name requests that occur worldwide.

The DNS, from the root server zone files to the end user can be viewed as a large corporation. Tiny issues and problems can be resolved clear down at the user, or employee level, with larger issues being passed up the chain, clear to the CEO, or root name server level. Each DNS server in the chain is responsible for a particular zone, which is like a department or sub-zone of the root zone.

Each server will resolve requests if it has the information stored or cached. If a request for a particular domain occurred recently, it could be resolved through the cache, which is a history of previously resolved requests, or stored memory, of that information. The caching can occur at any level in the DNS from the individual web browser to the root server. If a request cannot be resolved at that level, the query moves up the chain until a DNS computer can supply the information.

114

Troubleshooting

Resolving Domain Requests

The requests that are made resolve domain names to IP addresses, for example when a user types www.arialsoftware.com, the name is converted to our

IP address

, 204.17.32.94. Since humans can't read and remember IP addresses easily, domain names are used for most of the websites on the Internet.

Computers however can't resolve domain names, and must connect to remote computers using the IP address. The DNS resolves domain names to IP addresses authoritatively, meaning that the results are accurate.

Many local requests are handled at the web browser level, where the first simple caching occurs. When someone visits a website, the resolved IP address for a particular domain is stored in a local cache for quick retrieval when the user goes back. No query needs to be made to the next level of name server until the cache expires. The next level of the DNS is the most active; most of the minor details are handled at what is called the recursor level.

The root servers are queried less frequently, since the information they store seldom changes. The root servers manage the IP addresses for the top-level domains (TLD), .org, .com, .net etc. Like the CEO of a corporation, the root level operations manage the strategic direction of the entire organization and delegate to the next level of DNS the lesser operations. If the request goes unresolved by the local cache or the recursor cache, the query is passed up to check for changes at the next level, and so on up the chain. The root name server may change only a few times per year, but sub domain name servers change more frequently the lower they appear in the hierarchy.

Use Proper DNS Entries

This is where it becomes imperative to link your domain with a well-behaved domain name server. Typically this is one managed by a web host, or even in a company IT department. A particular name server may resolve a number of domain names, and will have a larger cache from where it can find more information if necessary. If a query was made from a different computer to a particular domain, that cached information can be pulled up for any new request made by a different entity. This caching keeps the load off of the upper tiers of the domain name system.

"DNS also distributes the responsibility for assigning domain names and mapping them to IP networks by allowing an authoritative server for each domain to keep track of its own changes, avoiding the need for a central registrar to be continually consulted and updated."

The domain name server for a particular domain can include additional information regarding the zone for which it is responsible. This is where mail exchange information, authoritative DNS and reverse DNS are configured to ensure that a particular mail server is authorized to send mail for a particular domain.

115

Enterprise Manual

These are typically text records appended to the DNS and list the appropriate information. This is information that needs to be provided to the DNS server by you, or your representative.

SPF and Domain Keys

Sender Policy Framework and Domain Keys are new authentication methods being incorporated to validate the servers sending bulk email. Configuring these features on your mail server will help with deliverability and your email reputation.

•

SPF

Domain Keys/DKIM

DomainKeys is an authentication system that is Independent of Simple Mail

Transfer Protocol (

SMTP

). Email messages are still sent using SMTP, but

DomainKeys is not an SMTP extension. Unlike SPF it deals with the email headers that are outside the message envelope. DomainKeys was designed to identify email spoofing and does not prevent abusive behavior, simply makes it easier to track. Yahoo! implemented DomainKeys in 2004 for outbound email, and since 2005 has tracked incoming keys.

To implement DomainKeys, the SMTP server operator specifies a public/private key pair. The public key is located on the

DNS

server, and the private key is configured on the SMTP server. When sending, the SMTP checks in with the

DNS and if verified, adds a DomainKeys-signature to the message headers. The receiving server then reads the signature and checks the public key on the DNS server and verifies the signature. It then uses that information to apply a rule or deliver the email to the final recipient. If there is no match, the message can be ignored since it is apparently a spoof. When Yahoo! receives an email that doesn't have a key pair specified, it will simply indicate that in the message headers as a neutral domain key signature. Someday however, they may eventually reject email messages that are not digitally signed. To determine if a remote server currently implements DomainKeys, look at the full headers of the email received. A typical DomainKeys header looks like this:

Authentication-Results: mail.someisp.com from=email.somedomain.com; domainkeys=pass (ok)

116

Troubleshooting

DomainKeys Check

Figure 2 DomainKeys Signature Check

SPF

Sender Policy Framework (SPF) is an extension of Simple Mail Transfer Protocol

(

SMTP

). SPF specifically addresses email spoofing, which is a common

spam

practice. Spoofing refers to forging a sender's address. SPF verifies information from the message envelope, focusing on the return-path email address. Like a regular mail envelope, the email message envelope describes who the email message is from and to whom it is going. There are other headers outside the envelope headers that contain additional information that do not pertain to SPF.

The SPF record on the Domain Name System (

DNS

) server responsible for a particular web domain is what determines the status, pass, fail, or softfail etc. that is passed to the recipient mail server.

The SPF record specifies which email servers are allowed to send email for a particular domain. The DNS server manages the network of computers connected to a domain. These include the A record, which indicates the web server for that domain, a pointer record (PTR) that manages the reverse DNS lookups, and mail exchange (MX) records which are the mail servers responsible for delivering email for the domain. SPF simply performs a check on one or more of these computers to verify to the recipient mail server their status. In other words; it authenticates them. SPF by itself does not prevent spam, the recipient mail server reads the information in the SPF file and then makes some sort of determination based on the status. There are many ISPs using SPF, MSN and

Gmail for example. The way to tell for sure is to look for the SPF status in the email headers. A typical response from a server with SPF implemented may have a header that looks like this: Received-SPF: pass

The SPF record is a text file built of mechanisms and qualifiers and is located on the DNS server.

117

Enterprise Manual

Mechanisms: all

Matches always, used for a default result like -all for all criteria not matched by prior mechanisms. a ip4 ip6 mx

If the domain name has an A record corresponding to the sender's address, it will match. (That is, the mail comes directly from the domain name.)

If the sender is in a given IPv4 range, match.

If the sender is in a given IPv6 range, match.

If the domain name has an

MX record

resolving to the sender's address, it will match. (That is, the mail comes from one of the domain's mail servers.) ptr exists

The domain Pointer record which manages reverse-DNS lookup

If the given domain resolves, match (no matter the address it resolves to). include If the included policy passes the test this mechanism matches. This is typically used to include policies of more than one

ISP

Each mechanism can be combined with one of four qualifiers:

Qualifiers:

+ for a PASS result, this can be omitted, +mx is the same as mx.

- for a NEUTRAL result interpreted like NONE (no policy). for SOFTFAIL, a debugging aid between NEUTRAL and FAIL. for FAIL, the mail should be rejected.

A very basic SPF text file may look like this:

"v=spf1 a mx ptr ip4:10.0.0.0 include:anotherdomain.com ~all"

The mechanisms go in order, so if the first mechanism matches, the corresponding qualifier is assigned, and the rest of the SPF text is ignored. In this example, the A record, MX record and PTR record are checked and any computer listed as such will PASS, as well as the specific

IP address

10.0.0.0.

All others will SOFTFAIL.

118

Sample SPF Check

Troubleshooting

Figure 1 A Simple Sample of an SPF Check

SMTP Server 1 sends mail to some ISP mail servers. The recipient mail servers make a check on the DNS server associated with the SMTP server, reading the SPF record. The IP address is specifically listed in the SPF record, assigning a status of PASS. The Recipient mail servers apply the status to a rule, and send the email.

SMTP Server 2 sends email to some ISP mail servers. The recipient mail server checks the DNS server associated with the SMTP server, reading the SPF record. The IP address is not specifically listed. The next mechanism, -all indicates that if none of the previous checks passed, then a FAIL status should be sent to the recipient mail server. In this example, one mail server doesn't care what the SPF indicates; it sends the email messages out anyway. The other

119

Enterprise Manual implements a rule based on the FAIL status passed to it from the DNS server and sends a bounce email notification.

120

Troubleshooting

Debugging

If you run into trouble with your Campaign software, there are a few things you should check before calling technical support.

If your click-through/opened email tracking links do not work:

your , make sure you have a public

domain name assigned when using click-throughs, opened email tracking, and web-based unsubscribes.

Make sure you have the proper merge fields in your message.

Make sure you have a number field in your

database

with a default value of zero (0) selected to update.

If you do not see any table/query information when you connect to a database:

Check your Database Connection in the Database Shortcuts

section. You may need to check the source

DSN

and make sure that it is configured properly.

Make sure you have permission to read and write back to the database.

Check your filter criteria and

SQL

syntax.

Make sure that your table name does not have a space or special character in it, only text and underscores.

If database write back features are not getting updated in your database:

Check your Database to ensure there are no spaces or special characters in the database, table, query or field names.

Check your POP account username and password, reenter if necessary.

You can test the POP account connection using the Test button on the appropriate tabs.

Check to make sure your bounce and unsubscribe email addresses are set up properly.

If emails are not being delivered, or are only going to internal addresses: your server to ensure that relaying is allowed for the

Campaign machine.

Make sure that if your SMTP server requires authentication you have the username and password entered on the Sending tab.

Debug Mode

The debug feature of Campaign can assist with troubleshooting issues with mail delivery and POP account checking.

121

Enterprise Manual

1. Turn on debug mode. This can be done using the Sever Manager window like the example below, or if you are running Campaign Enterprise as a

service

you can turn debug mode on through the Administration area.

Click on Administration >

Server Manager Status

and then check the

Debug Mode check box.

By activating Debug Mode the conversation between Campaign Enterprise and the SMTP server is recorded in the tracesmtp.log log file. The POP server conversations is recorded in the tracebatch.log file. Database connection errors will record to the trace.log file regardless of whether debug mode is turned on or not. The tracepop.log file records the conversation between the software and the

POP accounts it is checking. From the server manager window you can view any of the trace files by going to Debug and clicking on the file you want to view, or you can view the files by clicking on their corresponding icons on the Server

Manager Status page. The pathway to these files for a typical installation are:

C:\Program Files\CampaignEnterprise11\www\debug\tracesmtp.log

C:\Program Files\CampaignEnterprise11\www\debug\trace.log

C:\Program Files\CampaignEnterprise11\www\debug\tracebatch.log

C:\Program Files\CampaignEnterprise11\www\debug\tracepop.log

Debug Mode will be turned off when you close the Campaign Server Manager window or by un-checking Debug Mode.

Success/Fail Log Files

The success/fail log files show which emails were sent to the

SMTP

Server and which ones were not sent. The check box on the Miscellaneous tab must be checked in order for the success/fail logs to be generated.

The log files can be found in the Campaign Enterprise Logs folder. On a typical installation the path to the file will be as follows:

C:\Program Files\CampaignEnterprise11\www\Logs\CampaignID1-

Success-2005113001017812 .txt

C:\Program Files\CampaignEnterprise11\www\Logs\CampaignID1-

Failed-20051130017812.txt

122

Troubleshooting

If the email filter is not checked on the Data source

page (Intermediate Feature

Set), then no failed log files are generated.

Access Troubleshooting

Does your Table/Query Name drop down list look like the picture below? Spaces in the table name may be the problem.

If your Table/Query Name drop down list is not populated there may be a space or a character other than underscores and text in your table name. Remove any spaces or special characters, and then click refresh on the Datasource tab. If the drop down list is still not populated check the

Database

Source and make sure that it is pointing to the correct directory. If you are using a

DSN

connection make sure it is pointing to the directory where your databases are stored.

If you are able to see the Table/Query Name but the Email Address Field drop down list is not populated, check your field names for spaces or special characters, remove the spaces and any characters other than underscores and text.

Trace Logs

Trace.log: This log file records errors when writing to the

database

. Some problems will record automatically even if debug mode is not yet enabled. It can be found in the following path for a typical installation

c:\program files\CampaignEnterprise11\www\debug\trace.log

SMTP

.log: When Debug Mode is enabled, Campaign will write the entire conversation with the SMTP server to this log file. It can be found in the following path for a typical installation

c:\program files\CampaignEnterprise11\www\debug\tracesmtp.log

Batch.log: When Debug Mode is enabled, Campaign will write the entire conversation with the database when writing back Bounces, Unsubscribes, Click-

Throughs, Opens and Subscribe handling. It can be found in the following path for a typical installation

c:\program files\CampaignEnterprise11\www\debug\tracebatch.log

123

Enterprise Manual

POP.log: When Debug Mode is enabled, Campaign will write the entire conversation with the POP server used for Bounces, Unsubscribe and Subscribe handling. It can be found in the following path for a typical installation

c:\program files\CampaignEnterprise11\www\debug\tracepop.log

Install.log: During the campaign installation a log file is generated. It can be found in the following path for a typical installation

c:\program files\CampaignEnterprise11\www\install.log.

Web-server Log Files

Once Web-server logging has been enabled in the default campaign configuration area, log files will be generated in the following directory,

C:\Program Files\CampaignEnterprise11\Logs. The file names will start with

DART and include the date they were generated, for example,

DART06122004.log. The file contains information about each request made to the Campaign Enterprise web-server:

#Version: 1.0

#Date: 2006-01-06 09:01:00

#Fields: time c-ip s-ip s-

port

cs-method cs-uri-stem sc-status

09:01:32 10.10.35.9 10.10.35.26 81 GET / 403

This file can then be read by a web log analyzing tool.

The log files generated by web-server logging will grow very quickly since each request to the web-server is logged in the DART files.

124

Glossary

.csv: The file extention for a comma separated file.

.txt: The file extention for a text file.

attachment: A file that can be added to the messages and massively increaing the message size.

bandwidth: The size of your Internet connection.

CAN-SPAM: The law in the US that describes how you can legally send bulk email.

cursors: Database markers used to retrieve information more readily.

database: A program that stores and manages data in relational or flat tables.

DNS: Domain Name System

DSN: Data Source Name

EHLO: A secure command to initate an email through a mail server. Unsecured is HELO.

embedded images: Images stored on the local campaign computer. They are sent as specialized attachments so will greatly affect the message size.

EML Files: EML is the file extension for the email files that are going out. EML files can be dropped directly into the message queue.

ESP: Email Service Provider

Feedback Loops: An email account that monitors third party recipients for "this is spam" complaints.

125

Enterprise Manual

fully qualified URL: The full web address to an image or document including the http:// reference.

HELO: A command send to an SMTP server to initiate a mail connection. HELO is unsecured, EHLO is secured.

HTML: Hypertext Markup Language, the code used to build web pages and send web emails.

hyperlinks: The text in the email on which a user clicks to be taken to a web page.

IMAP4: Another mail box protocol used by Campaign to manage bounces and email based unsubscribe requests. When configured properly, an IMAP account can manage both bounces and unsubscribe requests.

IP address: Internet Protocol address, the way computers identify each other.

ISP: Internet Service Provider

MX record: Mail Exchange record

ODBC: Open Database Connectivity. Campagin can connect to an ODBC compliant database.

OLE DB: A DSNless database connection used in place of an ODBC.

POP3: A mail box protocol used by Campaign to manage bounced emails and email based unsubscribe requests.

Port: The endpoint of a pathway for a TCP/IP connection used for computer networking.

privacy policy: A written statement that must be included or linked to in your emails to be CAN-SPAM compliant.

Public IP: An IP addressed that is exposed to the world through the Internet.

Domain names resolve to IPs when computers communicate.

126

Glossary

queue: A line. The emails are lined up to go out through the server.

relative image paths: These are abbreviated image paths used frequently for web pages. Web based images in email must have a fully qualified URL, not a relative path.

service: A computer application that can be configured to run all the time, even if the computer reboots.

SMTP: The main sending protocol used to send emails, Stands for Simple Mail

Transfer Protocol.

SP: Abbreviation for stored procedure.

SPAM: Unsolicited bulk email.

SQL: Structured query language, the syntax used to write select statements for database record selection.

SSL: Secure Socket Layer also called TLS by some servers.

Stored Procedure: A command that runs on your database that can update records, write to files, or generate reports, also abbreviated SP. These commands are extremely versitile.

subscriber: Someone who signs up to receive the email messages you are sending.

TLS: Transport Layer Security, interchangable with SSL.

URL: Uniform Resource Locator

web based images: Images hosted elsewhere on a public web server.

Recommended over embedded images.

127

Enterprise Manual

Table of Contents

Campaign Enterprise User Manual

Who should use this guide?

Who should use Campaign Enterprise?

Other considerations for using Campaign Enterprise:

Using this guide

Quick Start Guide

Datasource

The Message

Send to the SMTP Server

Run Campaign

Installation

Installation and Configuration

Installation

Install Enterprise

Bandwidth

Activation/Serial Numbers

Campaign Service

Admin Settings

Admin Settings

Default Campaign Configuration

Server Manager Status

Database Shortcuts

Email Accounts

SMTP Connections

Blackout Dates

Manage Users

Manage Groups

Email Footers

Software Update

Manage Email Campaigns

Managing Email Campaigns

Elements of a Successful Email Campaign

Main Menu

Template Campaign

Campaign Edit Screens

Campaign Edit Screens

Campaign Settings

Data Source

Compose Email Message

Send Settings

Click-Throughs

Conversion Events

Bounce-Backs

Unsubscribe

Subscribe

Misc. Settings

Advanced Write Back Options

Campaign Types

Set Up Confirmation Campaign

Set Up Follow Up Email

Set Up Campaign Series

Edit Campaign

Copy Campaign

Note Feature

Reports

Reports

Overview Report

Bounce Report

Click-Through Tracking Report

Unsubscribe Report

Export Subscribers

Opened Email Report

Log Files

Test Campaign

Run Campaign

Schedule Campaign

Connect To an Email List

Connect To A Database

Growing a List

Databases

MS Access

MS SQL Server

MySQL

Text Files

Subscriber Lists

Other Databases

Connect to a Mail Server

Connect to a Mail Server