- Home
- Do-It-Yourself tools
- Power tools
- Yardworks
- 48 V Lithium-ion Cordless Hedge Trimmer
- Owner's manual
advertisement
È $.)&%(&53*..&3 model number 060-1979-2 | contact us: 1.866.523.5218
3026035
IMPORTANT:
Read and follow all safety rules and operating instructions before using this product.
Instruction
Manual
2 model no. 060-1979-2 | contact us: 1.866.523.5218
model no. 060-1979-2 | contact us: 1.866.523.5218
Introduction 4
Safety Instructions & Symbols
1SPEVDU4QFDJªDBUJPOT
Product Diagram
5
10
11
Before Operation
Operating Instructions
Maintenance
Storage
Troubleshooting
Exploded View
Parts List
Warranty
20
21
12
14
17
17
18
19
3
4 model no. 060-1979-2 | contact us: 1.866.523.5218
Please do not operate garden equipment near children. This could lead to severe injury or death.
*/530%6$5*0/
Congratulations on your purchase of your new Yardworks ® tool. It has been designed, engineered and manufactured to give you the best possible dependability and performance.
Should you experience any problem you cannot easily remedy, please contact our Yardworks ® customer service line at 1.866.523.5218.
PLEASE READ AND RETAIN THIS INSTRUCTION MANUAL. These instructions will enable you to assemble and maintain your appliance properly. ALWAYS observe the “SAFETY RULES”.
The instruction manual was designed to conveniently help you get your purchase ready to use so there’s less risk of damaging it and to provide you with enough information to get familiar with your product’s controls and features and to operate it safely.
4"'&5:'*345
$"65*0/5IFPQFSBUJPOPGHBSEFOFRVJQNFOUDBO result in foreign objects thrown into the eyes, which
DBOSFTVMUJO4&7&3&&:&*/+63:"-8":4XFBS safety glasses or eye shields while operating your garden equipment or performing any adjustments or
SFQBJST8FSFDPNNFOETUBOEBSETBGFUZHMBTTFTPSB wide vision safety mask worn over spectacles.
Please read this manual carefully and make sure you understand the instructions before using the machine.
Model number:
Serial number:
Date of purchase (MM/DD/YYYY):
Notes:
model no. 060-1979-2 | contact us: 1.866.523.5218
(&/&3"-108&3500-4"'&5:8"3/*/(4
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
VTFBOFYUFOTJPODPSETVJUBCMFGPS outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
G*GPQFSBUJOHBQPXFSUPPMJOBEBNQ location is unavoidable, use a residual
DVSSFOUEFWJDF 3$%QSPUFDUFETVQQMZ
Use of an RCD reduces the risk of electric shock.
8PSLBSFBTBGFUZ
B,FFQXPSLBSFBDMFBOBOEXFMMMJU Cluttered or dark areas invite accidents.
C%POPUPQFSBUFQPXFSUPPMTJOFYQMPTJWF atmospheres, such as in the presence of
«BNNBCMFMJRVJETHBTFTPSEVTU Power tools create sparks which may ignite the dust or fumes.
D,FFQDIJMESFOBOECZTUBOEFSTBXBZXIJMF operating a power tool. Distractions can cause you to lose control.
&MFDUSJDBMTBGFUZ
B1PXFSUPPMQMVHTNVTUNBUDIUIFPVUMFU
/FWFSNPEJGZUIFQMVHJOBOZXBZ%P not use any adapter plugs with earthed
HSPVOEFEQPXFSUPPMT 6ONPEJªFEQMVHT and matching outlets will reduce risk of electric shock.
C"WPJECPEZDPOUBDUXJUIFBSUIFEPS grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
D%POPUFYQPTFQPXFSUPPMTUPSBJOPSXFU conditions.
Water entering a power tool will increase the risk of electric shock.
E%POPUBCVTFUIFDPSE/FWFSVTFUIFDPSE for carrying, pulling or unplugging the
QPXFSUPPM,FFQDPSEBXBZGSPNIFBUPJM sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
F8IFOPQFSBUJOHBQPXFSUPPMPVUEPPST
1FSTPOBMTBGFUZ
B4UBZBMFSUXBUDIXIBUZPVBSFEPJOHBOE use common sense when operating a
QPXFSUPPM%POPUVTFBQPXFSUPPMXIJMF
ZPVBSFUJSFEPSVOEFSUIFJO«VFODFPG drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
C6TFQFSTPOBMQSPUFDUJWFFRVJQNFOU
Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
D1SFWFOUVOJOUFOUJPOBMTUBSUJOH&OTVSF the switch is in the off-position before
DPOOFDUJOHUPQPXFSTPVSDFBOEPS battery pack, picking up or carrying the tool. $BSSZJOHQPXFSUPPMTXJUIZPVSªOHFSPO the switch or energising power tools that have the switch on invites accidents.
E3FNPWFBOZBEKVTUJOHLFZPSXSFODI before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
F%POPUPWFSSFBDI,FFQQSPQFSGPPUJOH and balance at all times.
This enables better control of the power tool in unexpected situations.
G%SFTTQSPQFSMZ%POPUXFBSMPPTFDMPUIJOH
PSKFXFMMFSZ,FFQZPVSIBJSDMPUIJOHBOE gloves away from moving parts. Loose
!
8"3/*/(3FBEBMMTBGFUZXBSOJOHTBOEJOTUSVDUJPOT'BJMVSFUP follow the warnings and instructions may result in electric shock,
ªSFBOEPSTFSJPVTJOKVSZ
5
model no. 060-1979-2 | contact us: 1.866.523.5218
clothes, jewellery or long hair can be caught in moving parts.
H*GEFWJDFTBSFQSPWJEFEGPSUIFDPOOFDUJPO
PGEVTUFYUSBDUJPOBOEDPMMFDUJPOGBDJMJUJFT ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards.
I %POPUMFUGBNJMJBSJUZHBJOFEGSPNGSFRVFOU use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
I ,FFQIBOEMFTBOEHSBTQJOHTVSGBDFTESZ clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
1PXFSUPPMVTFBOEDBSF
B%POPUGPSDFUIFQPXFSUPPM6TFUIFDPSSFDU power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
C%POPUVTFUIFQPXFSUPPMJGUIFTXJUDI does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
D%JTDPOOFDUUIFQMVHGSPNUIFQPXFSTPVSDF
BOEPSUIFCBUUFSZQBDLGSPNUIFQPXFSUPPM before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
E4UPSFJEMFQPXFSUPPMTPVUPGUIFSFBDI of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
F.BJOUBJOQPXFSUPPMT$IFDLGPS misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation.
If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
G,FFQDVUUJOHUPPMTTIBSQBOEDMFBO
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
H6TFUIFQPXFSUPPMBDDFTTPSJFTBOE
#BUUFSZUPPMVTFBOEDBSF
B 3FDIBSHFPOMZXJUIUIFDIBSHFSTQFDJªFE by the manufacturer.
A charger that is suitable for one type of battery pack may
DSFBUFBSJTLPGªSFXIFOVTFEXJUIBOPUIFS battery pack.
C 6TFQPXFSUPPMTPOMZXJUITQFDJªDBMMZ designated battery packs. Use of any other battery packs may create a risk of injury and
ªSF
D 8IFOCBUUFSZQBDLJTOPUJOVTFLFFQJU away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may
DBVTFCVSOTPSBªSF
E 6OEFSBCVTJWFDPOEJUJPOTMJRVJENBZCF ejected from the battery; avoid contact.
*GDPOUBDUBDDJEFOUBMMZPDDVST«VTIXJUI water.
If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
F %POPUVTFBCBUUFSZQBDLPSUPPMUIBUJT
EBNBHFEPSNPEJªFE %BNBHFEPSNPEJªFE batteries may exhibit unpredictable behaviour
SFTVMUJOHJOªSFFYQMPTJPOPSSJTLPGJOKVSZ
G %POPUFYQPTFBCBUUFSZQBDLPSUPPMUP
ªSFPSFYDFTTJWFUFNQFSBUVSF Exposure to
ªSFPSUFNQFSBUVSFBCPWF$NBZDBVTF explosion.
H 'PMMPXBMMDIBSHJOHJOTUSVDUJPOTBOEEP not charge the battery pack or tool outside
UIFUFNQFSBUVSFSBOHFTQFDJªFEJOUIF
model no. 060-1979-2 | contact us: 1.866.523.5218
instructions. Charging improperly or at
UFNQFSBUVSFTPVUTJEFUIFTQFDJªFESBOHF may damage the battery and increase the risk
PGªSF
4FSWJDF
B )BWFZPVSQPXFSUPPMTFSWJDFECZB
RVBMJªFESFQBJSQFSTPOVTJOHPOMZ identical replacement parts. This will ensure that the safety of the power tool is maintained.
C /FWFSTFSWJDFEBNBHFECBUUFSZQBDLT
Service of battery packs should only be performed by the manufacturer or authorized service providers.
)&%(&53*..&34"'&5:8"3/*/(4
B ,FFQBMMQBSUTPGUIFCPEZBXBZGSPN
UIFCMBEF%POPUSFNPWFDVUNBUFSJBMPS hold material to be cut when blades are
NPWJOH#MBEFTDPOUJOVFUPNPWFBGUFSUIF switch is turned off.
A moment of inattention while operating the hedge trimmer may result in serious personal injury.
C $BSSZUIFIFEHFUSJNNFSCZUIFIBOEMF with the blade stopped and taking care not to operate any power switch. Proper carrying of the hedge trimmer will decrease the risk of inadvertent starting and resultant personal injury from the blades.
D 8IFOUSBOTQPSUJOHPSTUPSJOHUIFIFEHF
USJNNFSBMXBZTªUUIFCMBEFDPWFS Proper handling of the hedge trimmer will decrease the risk of personal injury from the blades.
E 8IFODMFBSJOHKBNNFENBUFSJBMPS servicing the unit, make sure all power switches are off and the battery back is removed or disconnected. Unexpected actuation of the hedge trimmer while clearing jammed material or servicing may result in serious personal injury.
F 8IFODMFBSJOHKBNNFENBUFSJBMPS servicing the unit, make sure all power switches are off and the lock-off is in the locked position. Unexpected actuation of the hedge trimmer while clearing jammed material or servicing may result in serious personal injury.
G )PMEUIFIFEHFUSJNNFSCZJOTVMBUFE gripping surfaces only, because the blade may contact hidden wiring. Blades contacting a “live” wire may make exposed metal parts of the hedge trimmer “live” and could give the operator an electric shock.
H ,FFQBMMQPXFSDPSETBOEDBCMFTBXBZ from cutting area.
Power cords or cables may be hidden in hedges or bushes and can be accidentally cut by the blade.
I %POPUVTFUIFIFEHFUSJNNFSJOCBE weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
J $IFDLUIFIFEHFTBOECVTIFTGPSGPSFJHO objects, e.g. wire fences and hidden wiring.
K )PMEUIFIFEHFUSJNNFSQSPQFSMZFHXJUI both hands if two handles are provided.
L 5IFIFEHFUSJNNFSJTJOUFOEFEUPCFVTFE by the operator at ground level and not on ladders or any other unstable support.
M #FGPSFPQFSBUJOHUIFIFEHFUSJNNFS the user should make sure the locking
EFWJDF TPGBOZNPWJOHFMFNFOUT FHUIF
FYUFOEFETIBGUBOEQJWPUJOHFMFNFOUJG any, are in the locked position.
4"'&5:8"3/*/(4'03#"55&3:1"$,
B %POPUEJTNBOUMFPQFOPSTISFECBUUFSZ pack.
C %POPUFYQPTFCBUUFSZQBDLUPIFBUPSªSF
Avoid storage in direct sunlight.
D %POPUTIPSUDJSDVJUBCBUUFSZQBDL%POPU
TUPSFCBUUFSZQBDLTIBQIB[BSEMZJOBCPY or drawer where they may short-circuit each other or be short-circuited by other metal objects. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may
DBVTFCVSOTPSªSF
7
8 model no. 060-1979-2 | contact us: 1.866.523.5218
E %POPUSFNPWFCBUUFSZQBDLGSPNJUT original packaging until required for use.
F %POPUTVCKFDUCBUUFSZQBDLUPNFDIBOJDBM shock.
G *OUIFFWFOUPGCBUUFSZMFBLJOHEPOPUBMMPX the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
H 0CTFSWFUIFQMVT BOENJOVT NBSLT on the battery back and equipment and ensure correct use.
I %POPUVTFBOZCBUUFSZQBDLXIJDIJTOPU designed for use with the equipment.
J ,FFQCBUUFSZQBDLPVUPGUIFSFBDIPG children.
K 4FFLNFEJDBMBEWJDFJNNFEJBUFMZJGBDFMM or battery has been swallowed.
L "MXBZTQVSDIBTFUIFCBUUFSZQBDL recommended by the device manufacturer for the equipment.
M ,FFQCBUUFSZQBDLDMFBOBOEESZ
N 8JQFUIFCBUUFSZQBDLUFSNJOBMTXJUIB clean, dry cloth if they become dirty.
O #BUUFSZQBDLOFFETUPCFDIBSHFECFGPSF use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
P %POPUMFBWFCBUUFSZQBDLPOQSPMPOHFE charge when not in use.
Q "GUFSFYUFOEFEQFSJPETPGTUPSBHFJUNBZ be necessary to charge and discharge the battery pack several times to obtain
NBYJNVNQFSGPSNBODF
R 5IFCBUUFSZQBDLHJWFTJUTCFTU performance when it is operated at normal
SPPNUFNQFSBUVSF $ r $' r '
S 8IFOEJTQPTJOHPGCBUUFSZQBDLTLFFQ battery packs of different electrochemical systems separate from each other .
T 3FDIBSHFPOMZXJUIUIFDIBSHFSTQFDJªFE by the manufacturer.
%POPUVTFBOZ
DIBSHFSPUIFSUIBOUIBUTQFDJªDBMMZ provided for use with the equipment. A charger that is suitable for one type of battery
QBDLNBZDSFBUFBSJTLPGªSFXIFOVTFEXJUI another battery pack.
U 3FUBJOUIFPSJHJOBMQSPEVDUMJUFSBUVSFGPS future reference.
V 6TFPOMZUIFCBUUFSZQBDLJOUIFBQQMJDBUJPO for which it was intended.
W 3FNPWFUIFCBUUFSZQBDLGSPNUIF equipment when not in use.
X %JTQPTFPGQSPQFSMZ
Information for radiated emission
This device complies with Canadian ICES-001.
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
model no. 060-1979-2 | contact us: 1.866.523.5218
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product effectively and safely.
Symbol Designation/Explanation
To reduce the risk of injury, user must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain
DANGER – Keep hands away from blade
Yardworks ® Canada. has established a partnership with the RBRC
Corporation to recycle any Yardworks ® batteries with the RBRCcall2recycle seal. For environmental protection, please do not discard batteries in the trash. After the battery’s life cycle is ended, please call
1-800-822-8837 for a free service that will properly dispose of the battery.
Warning
Make sure the battery is removed prior to changing accessories
Li-ion battery; battery must be recycled
Do not burn
Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
9
4"7&5)&4&*/4536$5*0/4Ì
model no. 060-1979-2 | contact us: 1.866.523.5218
5&$)/*$"-%"5"
Voltage
No load speed
Cutting diameter
Blade length
Machine Weight
48V
2800 /spm
1" (25 mm)
24" (61 mm)
10 lb 15 oz (4.5 kg)
46*5"#-&#"55&3:1"$,4
Item
Number
Battery
Capacity
060-1987-2 ABP4830SH 060-1988-0 ABP4850SH 060-1989-8
2.0 Ah 3.0 Ah 4.0 Ah 5.0 Ah 6.0 Ah
Not included
Not included
Not included
Not included
Not included
46*5"#-&$)"3(&34
Item Number
Charger Input
Charger Output
Charger
Protection Class
060-1990-2
120 V~, 60 Hz,
110 W
48 V , 2 A
/ II
Not included
060-1992-8
120 V~, 60 Hz,
320 W
48 V , 6 A
/ II
Not included
model no. 060-1979-2 | contact us: 1.866.523.5218
1.
Blade
2.
Safety guard
3.
Front switch lever(All around switch function)
4.
Battery pack release button
(not included)
5.
Battery pack (not included)
6.
Lock-off button
7.
Rotating rear handle
8.
On/off switch
9.
Locking switch for rotating
10. Blade sheath
1 2 3 4 5 6 7
9 8
10
Batteries and chargers sold separately. See previous page for applicable batteries and chargers that can be used with this product. Store personnel can assist you and offer advice.
8"3/*/("OZPUIFSBDDFTTPSZPSBUUBDINFOUNBZJODSFBTFUIFSJTLPG injury.
model no. 060-1979-2 | contact us: 1.866.523.5218
To reduce the risk of injury, user must read instruction manual.
*OUFOEFE6TF
The machine is intended for cutting and trimming hedges and bushes in domestic use.
$)"3(*/(130$&%63& 4&&'*("
1) Plug the charger (not included) into an appropriate outlet.
4MJEFUIFCBUUFSZQBDL OPUJODMVEFEJOUPUIFDIBSHFSUIFMJHIUXJMMCFHJO«BTIJOHHSFFOUPJOEJDBUF the charging process has started.
3) When charging is completed, the light will turn solid green. The pack is now fully charged; unplug the charger and remove the battery pack.
$)"3(*/(5)&#"55&3:1"$,
*.1035"/5/05&4'03$)"3(*/(#"55&3:
The battery (not included) for your new tool is not charged when it leaves the plant; therefore, it must
CFGVMMZDIBSHFECFGPSFVTJOHUIFªSTUUJNF
/05& If the battery pack is very hot, remove the battery from the charger and allow it to cool to ambient temperature before attempting to recharge.
To prevent damage to the battery pack, please fully charge the battery or to no less than half charge before storage.
If the tool will not be used for long periods of time, charge the battery every 3-6 months.
A
$)"3(*/(*/%*$"503
This charger is designed to detect some problems that can arise with battery packs.
Indicator lights indicate problems (see information on next page).
8"3/*/(8IFOCBUUFSZDIBSHFSVOTPVUBGUFSDPOUJOVPVTVTFPS
FYQPTVSFUPEJSFDUTVOMJHIUPSIFBUBMMPXUJNFGPSUIFUPPMUPDPPM down before re-charging to achieve the full charge.
model no. 060-1979-2 | contact us: 1.866.523.5218
Red on
3FE«BTI
Green on
-JHIU 0/'MBTI Status
Defective battery.
Battery Temperature Protection.
The temperature of battery pack is less than 0 o C (32 o F) or more than
40 o C (104 o F).
Fully charged.
Charging.
(SFFO«BTI
50*/45"--033&.07&5)&#"55&3:1"$, 4&&'*(#
Slide the battery pack into tool’s battery port. A simple push and slight pressure will be
TVGªDJFOU
Press the battery pack release button and remove the battery pack from the tool.
B
3&.07&#-"%&4)&"5) 4&&'*($
C
model no. 060-1979-2 | contact us: 1.866.523.5218
5045"35)&%(&53*..&3 4&&'*(%
Your hedge trimmer is equipped with a lock-off button to prevent accidental starts when not in use. To start the hedge trimmer press and hold the lock-off button, then press and hold the ON/OFF switch and front switch lever at the same time. After starting the hedge trimmer, the lock-off button can be released. The hedge trimmer will stay on as long as the ON/OFF switch and front switch lever remain engaged.
D
504501)&%(&53*..&3
Move hedge trimmer away from cutting area before stopping.
To stop, release either the safety handle switch or on/off switch, the trimmer will stop almost immediately.
50305"5&5)&3&"3)"/%-& 4&&'*(&&
Your trimmer is equipped with a rotating rear handle which can be turned to 5 angles
1) Lift up the locking switch for rotating to unlock the handle.
2) Turn the handle to an angle as required. After turned to the position as required, adjust the handle a little until a click can be heard. The handle is now locked.
8"3/*/( If any parts are missing, damaged or broken, do not operate your hedge trimmer until all damaged parts have been replaced or repaired.
Failure to do so could result in serious personal injury.
8"3/*/(Ì%POPUVTFUIFQSPEVDUXJUIPVUUIFHVBSE
8"3/*/( Always make sure that the handle is locked in the desired position before operation.
8"3/*/(%POPUSPUBUFUIFIBOEMFXIFOUIFUSJNNFSJTCFJOH operated.
model no. 060-1979-2 | contact us: 1.866.523.5218
0°
45°
90°
135°
180°
E1 E2
)085064&:063)&%(&53*..&3
Inspect the area to be cut before each use, remove objects which can be thrown or become entangled in the cutting blades.
Always hold the hedge trimmer with both hands and with the blade away from you before turning it on.
When trimming new growth, use a wide sweeping action so that the stems are fed directly into the blade.
Allow the cutting blades to reach full speed before entering the material to be cut.
Always work in the direction going away from people and solid objects such as walls, large stones, trees, vehicles etc.
If the blade stalls, immediately stop the hedge trimmer. Remove the battery pack and clear the jammed debris from the cutting blade.
Wear gloves when trimming thorny or prickly growth.
Move the hedge trimmer to feed the branches directly into the blade cutting edges.
Do not try to cut stems that are too large to feed into the cutting blade.
*.1035"/55*14'0353*..*/()&%(&4
• Assume secure posture and hold trimmer with both hands. If using a stepladder, ensure it is secured and if working at a high level, tie the ladder to the thicker, inner branches of the hedge.
• Ensure no people or animals are in or near the work area.
501$655*/( 4&&'*('
Use a wide sweeping motion. A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results.
model no. 060-1979-2 | contact us: 1.866.523.5218
F1
4*%&$655*/( 4&&'*(''
When trimming the sides of the hedge, begin at the bottom and cut upwards, tapering the hedge inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth.
You can rotate the rear handle to perform side cutting as shown in Fig.F3.
F2 F3
model no. 060-1979-2 | contact us: 1.866.523.5218
."*/5&/"/$&
$MFBOJOH"OE4UPSBHF
• Never use water to clean the unit.
• Always clean the hedge trimmer immediately after use. Brush the blade using a stiff nylon brush to remove any debris.
• Always store the hedge trimmer in a secure, dry place out of the reach of children.
• Do not place other objects on top of the machine.
• Inspect the hedge trimmer before each use.
• Have the unit professionally repaired if any damage occurs.
• 5IFCMBEFSBJMTIPVMECFDMFBOFEBOEUSFBUFEXJUIªOFPJMBGUFSFBDIVTF
• Use the blade sheath for transportation and storage.
-VCSJDBUJOH5IF$VUUJOH#MBEF 4&&'*((
For easier operation and longer life, lubricate the cutting blades before and after each use. Before lubricating, make sure the battery pack is removed from your hedge trimmer. Apply the oil so that it runs between the two blades. Common light duty/ machine oil can be used.
Your trimmer should be stopped, disconnected and oiled occasionally during use.
G
'PS#BUUFSZUPPMT
The ambient temperature range for the use and storage of tool and battery is 0 ȭ to
$ 'UP'
The recommended ambient temperature range for the charging system during charging is 0 ȭ UP$ 'UP'
It is recommended that the battery be stored indoors during the winter months.
4503*/(:063)&%(&53*..&3
Store in a dry place where the trimmer can be protected from damage.
8"3/*/(Ì Always remove the battery pack from the tool before cleaning or repairing.
model no. 060-1979-2 | contact us: 1.866.523.5218
The following table gives problems and actions that you can perform if your machine does not operate correctly. Warning: Switch the hedge trimmer off and remove the battery prior to any troubleshooting.
Problem Possible Cause
Hedge trimmer will not operate.
Battery discharged.
Battery too hot/cold.
Motor is broken.
Internal wiring of machine damaged.
Corrective Action
Recharge battery
Allow to cool/warm.
Contact Customer service at
1.866.523.5218.
Contact Customer service at
1.866.523.5218.
Hedge trimmer runs intermittently.
Motor is broken.
Battery not fully charged.
On/Off switch defective.
Contact Service Agent.
Recharge battery.
Contact Customer service at
1.866.523.5218.
Contact Customer service at
1.866.523.5218.
Excessive vibrations/ noise.
Machine defective.
Hedge trimmer is not cutting properly.
Blade is blunt or damaged.
Contact Service Agent.
Battery charge indicator does not light up.
Battery not (properly) inserted.
Continuous lighting of the battery charge indicator/ battery not charging.
Battery contacts contaminated.
Battery defective.
Properly insert battery into battery charger.
Clean the battery contacts or replace the battery.
Replace the battery.
Plug of battery charger not plugged in (properly).
Insert mains plug (fully) into the socket outlet.
Outlet or mains cable defective. Check the mains voltage.
Battery charger defective. Replace the battery charger.
model no. 060-1979-2 | contact us: 1.866.523.5218
model no. 060-1979-2 | contact us: 1.866.523.5218
No.
Part Description
8
9
6
7
10
11
12
3
4
5
1
2
17
18
19
20
13
14
15
16
21
22
23
24
25
26
27
28
29
30
31
32
Safety guard
Screw ST3.9X16
Screw ST3.9X16
Front handle lower cover
Compression spring 0.5X7X32
Switch MSF-1220/60V, 20A
DHT5100 Tie rod
Compression spring 0.6X5X15
Front handle button
Front handle top cover
Screw ST4.2X16-F GB/T845-86
Decorative cover
Guard plate assembly
Brush motor 48V DC 800#
Gear
Left housing
"JSHVJEFSJOHMPXFSDPWFS
Air guide ring top cover
Left decorative cover
Switch tie rod
Compression spring
0.8X6X26.5/65Mn(B22.B25)
Left handle
Compression spring 0.6X7X25
Carbon spring wire
Lock button
Switch MSF-1220/60V,20A
GGT08A Tie rod
ABS(QM757K)
DHT5100 Switch button
Right handle
Screw ST4.2X16-F GB/T845-
86
Wire spring
Electrode holder
Right housing
Quantity
1
1
2
1
1
1
1
1
1
1
1
7
1
1
1
1
1
8
1
1
6
17
1
2
1
1
1
1
1
1
1
1
No.
Part Description
33
34
Right decorative cover
Deep groove ball bearing
61900-2RS GB/T 276-94
Bearing pressure plate 35
36
57
Screw assembly M4 35 GB/
T9074.3-1988
43
44
45
46
37
38
39
40
41
42
Gearcase cover
Gearbox cover
Gearbox
Bearing
Gasket
CHT12A Big gear 40C
Gasket
Eccentric wheel
Blade spacer
Cover board
50
51
52
53
47
48
Rivet
CHT12A shaft GCr15
49 Scabbard
101 Blade components
54
55
56
Nut M5
Blade guard
Back slot
Blade
Lightweight spring washer
Idler pulley
GHT02B tablet
Hexagon head bolt with full thread M5x18-8.8
58
59
60
GHT04A bolt
Idler pulley
Screw
Quantity
1
1
1
2
1
2
8
1
1
8
8
2
1
1
1
1
1
1
2
1
2
2
1
1
1
1
7
2
2
model no. 060-1979-2 | contact us: 1.866.523.5218
FIVE-YEAR LIMITED WARRANTY
'PSªWF ZFBSTGSPNUIFEBUFPGQVSDIBTF within Canada, YARDWORKS CANADA will, at its option, repair or replace for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship (excludes battery).
HOW TO OBTAIN SERVICE
Warranty service is available by calling the toll-free helpline at 1.866.523.5218.
The factory will not accept the return of a complete unit unless prior written permission has been extended by YARDWORKS
CANADA.
For THREE (3) years from the date of purchase within Canada, YARDWORKS
CANADA will, at its option, repair or replace for the original purchaser, free of charge, any battery found to be defective in material or workmanship.
THIS WARRANTY DOES NOT COVER
1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration;
2. The unit, if it has not been operated and/ or maintained in accordance with the owner’s manual;
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade sharpening; or
5. /PSNBMEFUFSJPSBUJPOPGUIFFYUFSJPSªOJTI due to use or exposure.
TRANSPORTATION CHARGES
Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser.
The purchaser must pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by
YARDWORKS CANADA.
OTHER WARRANTIES
All other warranties, express or implied, including any implied warranty of merchantability is limited in its duration to that set forth in this express limited warranty.
The provisions as set forth in this warranty provide the sole and exclusive remedy of
YARDWORKS CANADA obligations arising from the sale of its products.
FULL ONE YEAR (365) DAYS WARRANTY
ON NORMAL WEAR PARTS
/PSNBMXFBSQBSUTBSFEFªOFEBTCMBEF safety guard. These parts are warranted to the original purchaser to be free from defects in material and workmanship for a
QFSJPEPGUISFFIVOESFEBOETJYUZªWF days from the date of retail purchase.
Made in China. Imported by Yardworks Canada
Toronto, Canada M4S 2B8
!
Always remove or disconnect the battery pack before adjusting, cleaning, servicing or transporting your appliance.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project