advertisement
IW 80
105890
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197 www.bartscher.com
Version: 1.0
EN
2
Date of preparation: 2023-01-20
Original instruction manual
Explanation of Signal Words .................................................................... 2
Declaration of Conformity ........................................................................ 7
List of Components of the Appliance ..................................................... 10
Functions of the Appliance ..................................................................... 10
Safety Instructions for Cleaning ............................................................. 15
105890 1 / 16
EN
Safety
Diese Bedi enungsanlei tung besc hrei bt di e I nst allation, Bedi enung und Wart ung des G eräts und gilt als wic htige Infor mationsquelle un d N achschl agewer k. Di e Kennt nis aller enthalt enen Sic herheits hinweis e und H andlungs anweisungen schaf ft die Vorauss etz ung f ür das sichere und s ac hger echte Ar beit en mit dem G erät. D arüber hi naus müs sen die f ür den Ei ns atz ber eic h des G erät s gelt enden ör tlichen Unfall verhüt ungs vorsc hrift en und allgemeinen Sicherheits besti mmungen eing ehalt en wer den. Dies e Bedi enungs anleit ung is t Bes tandt eil des Produkts und muss i n unmi tt elbarer N ähe des Ger äts für das In¬s tall ations-, Bedi enungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬bewahrt werden. Wenn das Ger ät an eine dritt e Pers on weiterg egeben wird, muss die Bedi enungsanlei tung mit ausgehändigt wer den.
Read this instruction manual before using and keep it available at all times!
This instruction manual contains information about installation, operation and maintenance of the appliance and constitutes an important source of information and reference guide. The knowledge of all operational and safety instructions included in this manual is a prerequisite for safe and proper handling of the appliance. Additionally, accident prevention, occupational health and safety, and legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in an immediate vicinity of the appliance and be available at all times. The instruction manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards currently in force. However, the appliance may be a source of hazards if used improperly or contrary to its intended purpose. All persons using the appliance must consider information included in this instruction manual and observe safety instructions.
1.1
Explanation of Signal Words
Important safety instructions and warning information are indicated in this instruction manual with appropriate signal words. You must strictly follow the instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe injuries or death if the hazards are not avoided.
2 / 16 105890
Safety
WARNING!
The signal word WARNING warns against hazards that may lead to moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to light or moderate injuries if the hazards are not avoided.
, di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages, which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines for the user on usage of the appliance.
1.2
Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp edges.
• Do not bend, pinch nor knot the power cord.
105890 3 / 16
EN
EN
Safety
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
• Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers.
Flammable Materials
• Never subject the appliance to contact with high temperature sources, e.g.: oven, furnace, open flame, heat generating devices, etc.
• To avoid fire hazard, clean the appliance regularly.
• Do not cover the appliance with, e.g., aluminium foil or cloths.
• Use the appliance only with materials designated to this end and with correct temperature settings. Materials, groceries and left-overs remaining in the appliance may catch fire.
• Never use the appliance near flammable or inflammable materials, e.g.: petrol, spirit, alcohol, etc. High temperature triggers evaporation of these materials, and, as a result of contact with sources of ignition, an explosion may occur.
• In case of fire, disconnect the appliance from the power supply before attempting suitable fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the power supply. Following extinction of fire, ensure sufficient fresh air inflow.
Safety of Induction Plate Operation
• During operation, the heating area is getting very hot.
Information: Induction cooker does not generate heat in the process of cooking. Nevertheless, the temperature of cookware heats up the heating area and the surface remains hot after use. Do not touch any hot surfaces of the appliance.
• You may transport and clean the appliance after it cools down entirely.
• It is prohibited to sprinkle hot surfaces with cold water or flammable liquids.
• Do not put metal kitchen utensils, lids, knifes nor any other metal objects on the heating area. These objects might heat up after switching the appliance on.
• Remember that wearable items, e.g. rings, watches etc., may heat up when they are close to the cooker’s plate.
• In order to avoid overheating, do not place any aluminium foil or metal plates on the heating surface of the appliance.
4 / 16 105890
Safety
• Do not heat up sealed containers, e.g. canned food, on the heating area of the induction cooker. Resulting overpressure may cause explosion (rupture) of a container or a can. The canned food is best to open it, put it in a pot filled with water and place the pot on a heating area in order to heat it up.
• The heating area is made of a temperature-resistant glass. In case of damage, even if it is only a small fracture, the device should be immediately disconnected from the power supply and you should contact the service company.
Operating personnel
• This appliance is not intended to be used by persons (including children) with limited physical, sensory or mental capabilities, nor by persons with limited experience and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or switching the appliance on.
Electromagnetic Fields
• Magnetized items, e.g. credit cards, data storage devices or calculators, may not be placed in an immediate vicinity of the switched on appliance. Magnetic field might damage them.
• Do not open the bottom cover!
• Cookware should always be placed in the middle of the cooking area, so that pot bottom covered the electromagnetic field to the maximum extent.
• Scientific researches proved that induction cookers pose no threat.
Nevertheless, people with cardiac pacemaker should keep a distance of at least
60 cm from the working appliance.
EN
105890 5 / 16
EN
Safety
Improper Use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and allows for safe operation.
• The appliance may only be used when all connections are executed according to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your own.
• Do not introduce any changes in the appliance nor modify it.
1.3
Intended Use
As described below, every use of the appliance for a purpose differing and/or diverging from its intended standard use, is prohibited and considered to be an unintended use.
The following is an intended use:
– Preparing and heating-up foods with the use of suitable cookware.
1.4
Unintended Use
An unintended use may lead to personal injuries or property damages caused by hazardous voltage, fire or high temperature. The appliance may only be used to perform tasks described in this instruction manual.
The following is an unintended use:
– Heating of rooms.
– Heating-up flammable, hazardous to health and volatile, etc. liquids and materials.
6 / 16 105890
General information
2 General information
2.1
Liability and Warranty
All information and instructions in this instruction manual account for legal regulations in force, current level of technical engineering knowledge as well as our expertise and experience, developed over the years. If special models or additional options are ordered, or state-of-the-art technical solutions were implemented, the actual scope of delivery of the appliance may, in some circumstances, differ from descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for improvement of the appliance and its performance.
2.2
Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its other components are copyright protected. It is prohibited to reproduce this instruction manual (including its excerpts), in any form and by any means, and to use and/or transfer its content to third parties without manufacturer’s written permission. Violation of the above results in obligation to pay compensation. We reserve the right to claim further damages.
2.3
Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We may provide relevant Declaration of Conformity upon request.
EN
105890 7 / 16
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1
Delivery Check
Immediately upon reception, check the delivery for completeness and possible shipping damage. In the case of visible transport damage refuse to accept the appliance or accept it conditionally. Mark and note the scope of damage in shipping documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2
Packaging
Do not dispose of the appliance cardboard box. It may be used to store the appliance when relocating or when shipping the appliance to our service point in the case of any damages.
The packaging and its elements are made of recyclable materials. Particularly, these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3
Storage
Leave the packaging closed until installation of the appliance; observe external indications concerning method of placing and storage. Store the packaging in the following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the condition of the packaging and the parts regularly. If needed, replace the packaging with a new one.
8 / 16 105890
Technical Data
4 Technical Data
4.1
Technical Specifications
Name:
Art. No.:
Material:
Concave hob material:
Concave hob diameter, in mm:
Power output per hob, in kW:
Number of power output levels:
Connected load:
Induction wok IW 80
105890 stainless steel glass
370
8
6
8 kW | 400 V | 50 Hz
Dimensions (W x D x H), in mm: 510 x 600 x 330
Weight, in kg: 22,2
We reserve the right to implement technical modifications.
Version / Characteristics
• Equipment connection: 3 NAC
• Type of hobs: induction
• Control: knob
• Control: power output
• Cookware detection
• Overheating protection
• Indicator lights: ON/OFF, heating-up, overheating, cookware detection
EN
105890 9 / 16
4.2
List of Components of the Appliance
Technical Data
EN
Fig. 1
1. Concave hob
3. Indicator light
5. Housing
4.3
Functions of the Appliance
2. Rotary control knob
4. Feet (4 pcs)
The induction wok is designed for preparing and heating-up foods using appropriate cookware. The concave hob with diameter of 37 cm and power output of 8 kW features 6 power output levels. Operation is intuitive and executed with a knob.
10 / 16 105890
Installation and operation
5 Installation and operation
5.1
Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by authorised technical service only and in compliance with the applicable national law.
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film slowly, so no glue residues are left. Remove any glue residues with the use of a suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over and fall down.
105890 11 / 16
EN
EN
Installation and operation
• Do not place the appliance in the vicinity of devices or objects that are sensitive to magnetic fields (e.g. radio, television, etc.).
• Leave at least 5 -10 cm clearance from flammable walls and other objects.
5.2
Electrical Connection
• Do not use the appliance with an external timer or remote control.
• Electrical connection of the appliance to mains power supply must be executed by a qualified electrician, according to international, national and local regulations in force.
• The induction cooker is equipped with power cord. It must be connected with a plug or directly into the mains wall socket.
5.3
Operation
Method of operation of heating plates
In induction cookers the electric voltage is applied to a conductive coil under the glass. This generates magnetic field, which being a physical effect, heats the bottom of a cookware directly.
This translates to savings of time and energy, as
— contradictory to traditional heating areas — there is no heating up of a heater and then of the glass heating plate.
Another advantage of the technical features described above is the very short cooking time.
Additionally, inflow of heat changes instantly with every change of settings and it may be controlled precisely. The induction heating plate reacts to changes in settings as fast a gas cooker, for the energy is delivered immediately to a pot, without the need to prior heating up of other materials.
The induction technology combines the speed of reaction with a basic benefit of the current, making it possible to precisely control heat inflow.
12 / 16 105890
Installation and operation
Suitable Cookware
The induction wok should be only used with round frying pans made from steel, stainless steel, or other material, as long as they are marked as induction-approved
(see the kitchenware description).
HINT!
In order to operate properly the wok frying pan must have a magnetic bottom: the magnet must adhere to it.
When the induction wok is excessively tilted in relation to the magnetized container, it results in power drop and may also cause deactivation of overheating protection.
Therefore do not use aluminium, copper, or non-metallic kitchenware.
We recommend Bartscher W510F wok, art. No.
: 105731 .
Before Use
1. Before use, clean the appliance, observing instructions in section 6 'Cleaning' .
2. Dry the appliance thoroughly.
Operation
1. Plug the appliance into a suitable grounded socket.
The indicator light lights up green.
2. Place an appropriate cookware with food on the hob.
3. Use the rotary control knob to set the required power output level in the range of 1
–6.
When the power output level is set, the indicator light lights up red.
4. Set the rotary control knob to '0' to manually switch the appliance off.
The appliance switches off automatically if it is not operated for 4 hours.
Overheating Protection
EN
105890 13 / 16
EN
Installation and operation
The appliance is equipped with the overheating protection. When the critical temperature is exceeded, the appliance will switch off for safety reasons, and the indicator light blinks interchangeably in red and green.
ATTENTION!
Heating up an empty wok frying pan activates the overheating protection, and the appliance switches off.
Never put an empty wok frying pan in the concave hob.
When the overheating protection is activated, remove wok frying pan from the concave hob and leave the appliance for a few minutes to cool down.
Then, you may start using the appliance again.
14 / 16 105890
Cleaning
6 Cleaning
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in water or other liquids during cleaning. Do not clean the appliance with a pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp or pointed implements may damage the appliance, and when in contact with live parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive cleaning agents. They may damage the surface.
6.2
Cleaning
1. Clean the appliance regularly after the end of each working day, or more frequently if needed.
2. Wipe the concave hob, control panel, and housing of the appliance with a lukewarm water and soft, damp cloth. Use mild, non-scrubbing cleaning agent if required.
3. Finally, dry washed surfaces with a soft cloth.
4. Regularly clean the dust filter and grease filter with a mild cleaning agent or in a dishwasher. To this end, remove the filter from its holder. When cleaning is finished, introduce completely dry dust filter and grease filter into the appliance.
5. Ventilation slots at the rear of the appliance should not be obstructed with dirt nor dust. Clean them regularly with a brush or a blower.
EN
105890 15 / 16
Possible Malfunctions
EN
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to malfunctions or errors during operation of the appliance. When malfunction cannot be removed, contact the technical service.
Error code Cause Solution
No cookware on a hob or inappropriate cookware.
Use an appropriate cookware.
Appliance does not work
8 Disposal
Damaged element (e.g., a transistor).
Contact the service company.
Overheating protection is on and the appliance switches off.
Disconnect the appliance from the power supply (pull the plug out).
Remove the cookware from the hob.
Let the appliance cool off for a few minutes; restart the appliance afterwards.
Short-lasting power cut. Disconnect the appliance from the power supply (pull the plug out).
After a few minutes, plug the appliance in again. Have an electrician check the power supply.
Electrical Appliance
Electric appliances are marked with this symbol. Electrical appliances must be disposed of and recycled in a correct and environmentally friendly manner. You must not dispose of electric appliances with household waste. Disconnect the appliance from the power supply and remove power cord from the appliance.
Electrical appliances should be returned to designated collection points.
16 / 16 105890
advertisement