High Strength

10X

Zoom

SALES NETWORK

•

SAMSUNG TECHWIN CO.,LTD.

145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea

TEL : +82-31-740-8151~8 FAX : +82-31-740-8145

•

SAMSUNG TECHWIN AMERICA,LTD.

1480 Charles Willard St. Carson, CA 90746, UNITED STATES

TEL : +1-310-632-1234 FAX : +1-310-632-2195

•

SAMSUNG OPTO-ELECTRONICS UK,LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business Park

Chertsey Surrey KT16 OPS

TEL : +44-1932-45-5308 FAX : +44-1932-45-5325

www.samsungtechwin.com

www.samsungcctv.com

P/No. : Z6806-0750-01D

VAN 08. 12

High-Resolution 10X Vandal-Proof Dome Camera SVD-4300 User’s Manual

Thank you for purchasing a SAMSUNG CCD CAMERA.

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

ENGLISH

Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description.

■ SVD-4300 SERIES

•NTSC MODEL •PAL MODEL

SVD-4300(W)N SVD-4300(W)P

■ MODEL DESCRIPTION

SIGNAL SYSTEM

CAMEA COLOR

• SIGNAL SYSTEM

N NTSC MODEL

P PAL MODEL

• CAMERA COLOR

SILVER COLOR

W IVORY COLOR

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

WARNING - To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to all local codes.

Features

A/F 10x Optical Zoom

The built-in SVD-4300 optical zoom lens is a highly durable component. It features auto focus, auto iris, and zoom functions.

SSNR (Samsung Super Noise

Reduction)

By using built-in SSNR function manufactured by SAMSUNG TECHWIN, the amount of low illuminance noise has been significantly reduced, and the signal-to-noise ratio (S/N) as well as horizontal resolution have been improved, resulting in a clear and sharp image display even in the dark.

High Sensitivity

The built-in high sensitivity COLOR CCD enables a clear image even in 0.005Lux

(Sens-up, color) or lower illumination.

High Resolution

Featuring 500TV line horizontal resolution in color mode and 570TV line horizontal resolution in BW mode, the camera features Sony's

410,000 pixel CCD and captures clean, noiseless, high-quality images.

Day & Night

The camera automatically determines whether it is night time or day time, selecting operating mode automatically. The camera operates in color mode during day light conditions and BW mode in night conditions for clearer identification.

IP66 Approved / Dust and Rain

Resistant

With dust and rain resistant design, the camera can be installed outside under building eaves or places that are exposed to the dust and rain.

RS-485 Function

The camera, using a RS-485 communication can remote control relate to ZOOM/FOCUS and OSD menu functions.

Sub Monitor Function

The sub monitor function enables easy adjustment of the camera angle within the monitoring range during its installation.

3-Axis camera mechanism

The SVD-4300 is especially incredibly flexible to install with its 3-axis camera construction, which makes the camera wall or slope mountable.

Miscellaneous Functions

Other miscellaneous functions of the camera include privacy zone masking, digital zoom, line lock synchronization(INT/LL), freeze, horizontal inversion, and user-configured presets.

Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.

Warnings & Cautions

This information is provided to ensure your safety and to prevent any losses, financial or otherwise. Please read it carefully and use the product accordingly.

* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as an aerial ladder while providing after-sales service shall be at your expense.

Warning/Attention/Special Mark Messages

Ignoring this information may result in material loss and/or serious personal injuries including death.

Indicates “Never Allowed.”

Indicates “No Disassembling.”

Indicates Must Observe.

Contents

Precautions

Components and Accessories

Overview

Connection

Connecting To Monitor

Connecting To Power

RS-485 communication control

Operating Your Camera

Menu Configuration

Menu Setup

8

10

11

13

13

14

15

16

16

17

• CAM TITLE

• WHITE BALANCE

• BACKLIGHT

• MOTION DETECTION

• FOCUS

• EXPOSURE

• SPECIAL

• RESET

• EXIT

Troubleshooting

Specification

Dimension

40

41

43

18

21

22

23

24

29

34

39

39

Precautions

Do not install the camera in extreme temperature conditions.

Do not install or use the camera in an environment where the humidity is high.

Do not drop the camera or subject them to physical shocks.

Never keep the camera face to strong light directly.

Only use the camera under conditions where temperatures are between

-10˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures.

It can cause the image quality to be poor.

Do not install the camera under unstable lighting conditions.

Do not touch the front lens of the camera.

It can cause malfunctions to occur.

Do not expose the camera to radioactivity.

It can damage the CCD.

Severe lighting change or flicker can cause the camera to work improperly.

It is one of the most important parts of the camera. Be careful not to be stained by fingerprint.

COLOR CCD CAMERA

8

User’s Manual

If it is exposed to radioactivity, For heated CCD, it will be out of order.

Notes

• If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.

• Please check that the power satisfies the normal specification before connecting the camera.

COLOR CCD CAMERA

9

User’s Manual

Components and Accessories

1. SVD-4300

2. Instruction Manual

3. Quick Install Guide

4. Wrench

5. Ø5 Tapping Screws 4EA

6. Template

7. Installation Video Output Cable

COLOR CCD CAMERA

10

User’s Manual COLOR CCD CAMERA

11

User’s Manual

Overview

Overview

Pan Base

control panning angle of camera

Rotate Base Holding Screw

fix rotated position

Rotate Base

control rotating angle of camera

Pan Base Holding Screws (Color : Silver)

fix panned position

Auto Focus 10x Zoom Lens Module.

SET button

To access the main setup menu. Pressing the “SET” button locks the zoom control functions of these buttons and prompts the main setup menu.

AF button

To activate auto focus just once.

UP (WIDE button)

To move the arrow indicator to up.(To widen the view : ZOOM OUT)

DOWN(TELE button)

To move the arrow indicator to down (To close in on a far object: ZOOM IN)

LEFT (F-NEAR button)

To move the arrow indicator to left. (To see a near object clearly)

RIGHT (F-FAR button)

To move the arrow indicator to right. (To see a far object clearly)

Video Output Terminal to Monitor

Power Input Jack

Video Output Jack

RS-485 Control Cable

The detailed description refers to p15

Dome Cover

Shield Case

Notes

• The zoom postion is saved after 5 seconds when you set zoom function.

COLOR CCD CAMERA

12

User’s Manual

Connection

Connecting to Monitor

Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.

CCTV Camera Monitor

• As the connecting method varies with the instruments, refer to the manual supplied with the instrument.

• If necessary, you can connect the monitor to the REMOTE jack on the back of your camera.

• Only connect the cable when the power is turned off.

• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.

Intermediate End monitor

CCTV Camera

COLOR CCD CAMERA

13

User’s Manual

Connection

Connecting to Power

Use AC 24V / 300mA or DC 12V / 500mA power source.

For DC Power Type

• For DC power as the voltage drop according to the length of the cable in the above table, a camera may malfunction if there is an excessively long cable run.

Resistance of copper wire [at 20C˚ (68˚F)]

Copper wire size (AWG) #24(0.22mm

2

) #22(0.33mm

2

) #20(0.52mm

2

) #18(0.83mm

2

)

Resistance ( Ω / m)

Voltage Drop (V/m)

0.078

0.028

0.050

0.018

0.030

0.011

0.018

0.006

* Voltage for camera operation: 12V DC ±10%

* Voltage drops in the above table are variable according to types of cable manufacturer.

Notes

• Be sure to connect power only after all the installation is complete.

• Note that AC or DC adaptor is not supplied with camera.

• Use the UL listed, class 2 power transformer of AC 24V adaptor.

• Ground should be connected to the GND terminal.

COLOR CCD CAMERA

14

User’s Manual

RS-485 communication control

Connecting to RS-485 Control Cable

CONTROL CABLE SPEC

RED (TRX+) RS-485+

WHITE(TRX-) RS-485-

Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and

OSD menu at the SAMSUNG TECHWIN System Controller or DVR.

(1) The case which it controls from the PC

Using a RS-485 converter, It connects to RS-485 control cable outside camera and serial cable

EX) SERIAL PORT OF THE PC(COM1) — SERIAL CABLE -- RS-485 CONVERTER

-- RS-485 CONTROL CABLE

(2)The case which it controls from the DVR or System Controller

It connects the RS-485 control cable in the connection terminal of 485 control boards which are connected with the DVR or System Controller.

485 CONTROL BOARD CONNECTION TERMINAL

(+)CONNECTION TERMINAL

(-)CONNECTION TERMINAL

RS-485 CONTROL CABLE

RED (TRX+)

WHITE(TRX-)

Notes

• When you construct external control systems for a camera control, please use to the SAMSUNG TECHWIN PROTOCOL or PELCO-D PROTOCOL.

• When you connecting to RS-485 control cable, please peel off the outer skin inside the RS-485 control cable.

COLOR CCD CAMERA

15

User’s Manual

Operating Your Camera

Menu Configuration

MAIN SETUP MENU

CAM TITLE • OFF • ON

WHITE BALANCE

•

ATW(OUTDOOR)

•

AWC SET

BACKLIGHT

MOTION DET

FOCUS

• OFF

•

HIGH

•

•

OFF

MODE

• LOW

• ON

•

ZOOM TRK

• ZOOM SPEED • D-ZOOM

•

DISP ZOOM MAG

•

ZOOM POS INIT

•

MANUAL

• MIDDLE

EXPOSURE

SPECIAL

• LENS INIT

•

BRIGHTNESS

• AGC

•

END

• USER PRESET

•

SYNC

• END

• SMART ZOOM • END

•

IRIS

•

SHUTTER

• SSNR • SENS-UP

• PRIVACY

•

COMM ADJ

• DAY/NIGHT

•

IMAGE ADJ

RESET

EXIT

COLOR CCD CAMERA

16

User’s Manual

Menu Setup

Use the six buttons on back of the camera.

SET button AF button UP button

LEFT button RIGHT button DOWN button

1. Press the SET button to access the main setup mode.

• Main setup menu is displayed on the monitor screen.

MAIN SETUP

CAM TITLE OFF

WHIET BAL

BACKLIGHT

MOTION DET

ATW

OFF

OFF

FOCUS

EXPOSURE

SPECIAL

RESET

EXIT

2. Select the desired feature using the UP or DOWN button.

• Each pressing of the UP or DOWN button moves the indicator to the next or previous feature.

• Move the arrow indicator to the desired feature item.

COLOR CCD CAMERA

17

User’s Manual

Operating Your Camera

Select feature using the UP or DOWN button.

MAIN SETUP

CAM TITLE

WHIET BAL

BACKLIGHT

MOTION DET

FOCUS

EXPOSURE

SPECIAL

RESET

EXIT

OFF

ATW

OFF

OFF

Change the status using the

LEFT or RIGHT button.

3. Change the status of the selected feature using the LEFT or RIGHT button.

4. When completed, move the arrow indicator to 'EXIT' and press the SET button.

Notes

• Features marked with a have an accessible submenu.

• Access the submenu by pressing the SET button.

CAM TITLE

Use this feature to designate a name for the camera, which will display on the monitor screen.

1. Press the SET button to display the main setup menu and move the arrow indicator to 'CAM TITLE' using the UP or DOWN button.

2. Set 'CAM TITLE' to 'ON' using the LEFT or RIGHT button.

Notes

• If the CAM TITLE feature is set to 'OFF', the name will not displayed in the monitor.

MAIN SETUP

CAM TITLE

WHIET BAL

BACKLIGHT

MOTION DET

FOCUS

EXPOSURE

SPECIAL

RESET

EXIT

OFF

ATW

OFF

OFF

COLOR CCD CAMERA

18

User’s Manual

3. Press SET button.

4. You can enter up to 15 characters.

Move the cursor to the character entry field using the LEFT or RIGHT button.

Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character.

Press the SET button to confirm selection of the blinking character. The character is then saved, and the cursor in the entry field moves to the next position.

Repeat steps through until the desired name has been entered.

Notes

• Correcting Mistakes

Move the cursor to 'CLR' and press the SET button to clear the entire entry.

To modify one character, use or to position the cursor above the character to be modified and click the SET button after selecting the character to enter.

COLOR CCD CAMERA

19

User’s Manual

Operating Your Camera

5. Select on screen position of the CAM TITLE.

Move the cursor to 'POS' and press SET button.

The CAM TITLE is displayed on the top-left of the monitor screen.

(Default position)

FRONT DOOR

Select the position by using the 4-directional buttons, then press the SET button to confirm the position.

FRONT DOOR to Locate, then SET

6. When completed, move the cursor to 'END' and press SET button.

COLOR CCD CAMERA

20

User’s Manual

WHITE BALANCE CONTROL

Your camera provides three 'WHITE BAL' control modes for your choosing in adjusting the white balance.

1. Press the SET button to access the main setup menu and move the indicator to 'WHITE BAL' using the UP or DOWN button.

2. Set 'WHITE BAL' using the LEFT or RIGHT button.

MAIN SETUP

CAM TITLE OFF

WHIET BAL

BACKLIGHT

MOTION DET

FOCUS

EXPOSURE

ATW

OFF

OFF

The three white balance control modes are as follows :

ATW(Auto Tracking White Balance):

• OUTDOOR: This mode can be used within the color temperature range 1800~10500˚K

(Ex: fluorescent light, outdoor, sodium vapor lamp or inside tunnels)

• INDOOR : This mode can be used within the color temperature range 3000K~10500˚K.

AWC(Auto White balance Control):

The white balance is automatically adjusted in a specific environment. In order to obtain the best result, press the SET button while the camera focuses on white paper. If the environment including the light source is changed, you have to adjust the white balance again.

Manual:

To fine adjust, select the Manual mode. You can increase or decrease the red or blue factor while monitoring the difference on the screen. Set to 'MANUAL' mode and press the SET button. Increase or decrease the value for red(R-Gain) and blue(B-Gain), watching the color of the picture, and press the SET button when you obtain the best color.

COLOR CCD CAMERA

21

User’s Manual

Operating Your Camera

Notes

• Proper White Balance may not be obtained under the following conditions.

When the scene contains mostly high color temperature object, such as a blue sky or sunset.

When the scene is dim.

If your camera directly faces a fluorescent lamp or is used in an environment of varying lighting conditions.

BACKLIGHT

When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT function.

1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons.

2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.

MAIN SETUP

CAM TITLE OFF

WHIET BAL

BACKLIGHT

MOTION DET

FOCUS

ATW

OFF

OFF

HIGH/MIDDLE/LOW: You can adjust the sensitivity of Backlight Compensation.

OFF: BACKLIGHT function does not operate.

Backlight ON Backlight OFF

COLOR CCD CAMERA

22

User’s Manual

MOTION DETECTION

This product has a feature that allows you to observe movements of objects in

4 different areas on the screen, and the words ‘MOTION DETECTED’ appear on the screen when movement is detected; hence a single individual can conduct supervision efficiently. The camera detects an object’s movement by sensing disparity of outline, and level of brightness and color.

•Please press the SETUP button.

-OFF: MOTION DETECTION mode is cancelled.

-ON: Any motion in the selected areas is observed.

•Please press the SETUP button.

-OFF: MOTION DETECTION mode is cancelled.

-ON: Any motion in the selected areas is observed.

•Please select the area you wish to observe from the 4 areas in AREA SEL mode.

•Please select ON mode for the chosen area.

•Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button.

•Please press the SETUP button to save changes and complete the setting.

Notes

Tips on Using the Motion Detection Feature

• The feature may not function properly under flickering light conditions.

• The camera interprets sudden changes in lighting and subsequent change in brightness of an object as motion.

• With the feature enabled, other algorithms may require additional time to operate than usual.

• This system does not guarantee prevention of fire or theft. The manufacturer shall not be held responsible for any accident or damage incurred.

COLOR CCD CAMERA

23

User’s Manual

Operating Your Camera

FOCUS

MAIN SETUP

CAM TITLE OFF

WHIET BAL

BACKLIGHT

ATW

OFF

MOTION DET

FOCUS

OFF

EXPOSURE

SPECIAL

1. Press the SET button to access the main setup manu and then position the indicator over FOCUS using the UP or DOWN button.

2. Press the SET button.

MODE: You can select the most suitable zoom mode. Move the arrow indicator to

‘MODE’ using UP or DOWN button.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

D-ZOOM

AUTO

ON

FAST

OFF

DISP ZOOM MAG OFF

•AUTO : Select AUTO and press the SET button to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-

ZOOM) positions using the UP or DOWN button while verifying the changes on screen. Enabling D-ZOOM (ON) means that digital zoom will activate once optical zoom ends. Focus is automatically adjusted with moving zoom.

COLOR CCD CAMERA

24

User’s Manual

•ONE PUSH : Focus is automatically adjusted just once, after zoom position is changed. Select '

ONE PUSH' and press the SET button to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions using the directional buttons while verifying the changes on screen. Press the SET button once desired image quality is obtained.

•MANUAL : Select 'MANUAL' and press the SET button to confirm. Increase or decrease optical zoom

(ZOOM) or digital zoom (D-ZOOM) positions using the directional buttons while verifying the changes on screen. Press the SET button once desired image quality is obtained. Focus can be manually adjusted, independent of moving zoom.

ZOOM TRK: You can select to use ‘ZOOM TRK’. Move the arrow indicator to ‘ZOOM

TRK’ using UP or DOWN button. Set ‘ZOOM TRK’ to on using LEFT or

RIGHT button.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

AUTO

ON

FAST

ZOOM SPEED: Configure zoom tracing speed using this feature. Position the indicator over 'ZOOM SPEED' using the UP or DOWN button and then set to desired mode using the LEFT or RIGHT button.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

D-ZOOM

AUTO

ON

FAST

OFF

COLOR CCD CAMERA

25

User’s Manual

Operating Your Camera

•FAST: To move zoom fast. •SLOW: To move zoom slowly.

Notes

• The 'ZOOM SPEED' mode cannot be used if 'MODE' is set to 'AUTO' and 'ZOOM

TRK' is 'ON'.

D-ZOOM: Configure magnification limit from x2~x10 using this feature. Position the indicator over 'D-ZOOM' using the UP or DOWN button. Set 'D-ZOOM' to

'ON' and press the SET button to confirm.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

D-ZOOM

AUTO

ON

FAST

ON

DISP ZOOM MAG OFF

· Set 'ZOOM LIMIT' to the desired level using the LEFT or

RIGHT button.

DISP ZOOM MAG: Use this feature to display the current zoom magnification level on screen. Position the indicator over 'DISP ZOOM MAG' using the UP or DOWN button. Then set to ON using the LEFT or RIGHT button.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

AUTO

ON

FAST

D-ZOOM OFF

DISP ZOOM MAG ON

COLOR CCD CAMERA

26

User’s Manual

ZOOM POS INIT: Configure zoom position using this feature. Position the indicator ove 'ZOOM POS INIT' using the LEFT or RIGHT button.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

AUTO

ON

FAST

D-ZOOM OFF

DISP ZOOM MAG OFF

ZOOM POS INIT ON

LENS INIT

Notes

• Preset setting has priority over a ZOOM POS INIT setting.

LENS INIT : Use this feature to initialize the lens(1x, WIDE). Position the indicator over LENS INIT. using the UP or DOWN button. Press the SET button to confirm.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

D-ZOOM

DISP ZOOM MAG OFF

ZOOM POS INIT OFF

LENS INIT

SMART ZOOM

END

AUTO

ON

FAST

OFF

COLOR CCD CAMERA

27

User’s Manual

Operating Your Camera

SMART ZOOM :

'SMART ZOOM' is acted by motion perception. 'SMART ZOOM' acts zoom as

'TARGET ZOOM' that is established if motion is sensed. (Condition : when all

'MOTION DET MODE' and 'SMART ZOOM MODE' are 'ON') 'SMART ZOOM' returns as 'START ZOOM' after delay as 'DWELL TIME' establishing after action.

FOCUS SETUP

MODE

ZOOM TRK

ZOOM SPEED

D-ZOOM

AUTO

ON

FAST

OFF

DISP ZOOM MAG OFF

ZOOM POS INIT OFF

LENS INIT

SMART ZOOM

END

You can change 'SMART ZOOM' function establishment if press SET button after select 'SMART

ZOOM' article in FOCUS SETUP MENU.

•MODE : You can establish mode using left or right button

•START ZOOM : You use left or right button in

'START ZOOM' article you can select zoom position to return after

'SMART ZOOM' action from 1 times to 9 times.

•TARGET ZOOM : When uses one side or right button in 'TARGET ZOOM' article and senses motion, you can select zoom position to act from 2 times to 10 times.

•DWELL TIME : You use left or right button in 'DWELL TIME' article. You can choose time to delay before return to 'START ZOOM' position after zoom motion at 'TARGET ZOOM' position from 1 second to 20 seconds.

END: To revert to the main setup menu.

COLOR CCD CAMERA

28

User’s Manual

EXPOSURE

BRIGHTNESS

IRIS

SHUTTER

AGC

SSNR

SENS-UP

END

EXPOSURE SETUP

25.......

AUTO

---

NORMAL

LOW

OFF

1. Press the SET button to access the main setup menu and then position the indicator over 'EXPOSURE' using the UP or DOWN button.

2. Press the SET button to confirm.

BRIGHTNESS: Use this feature to adjust image brightness. Position the indicator over 'BRIGHTNESS' using the UP or DOWN button.

Then increase or decrease brightness level using the LEFT or

RIGHT button while verifying the changes on screen. Set END once desired level is obtained.

BRIGHTNESS

IRIS

SHUTTER

AGC

SSNR

SENS-UP

END

EXPOSURE SETUP

25.......

AUTO

---

NORMAL

LOW

OFF

COLOR CCD CAMERA

29

User’s Manual

Operating Your Camera

IRIS: Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using the UP or DOWN button and then select the desired iris mode using the LEFT or RIGHT button.

EXPOSURE SETUP

BRIGHTNESS

IRIS

SHUTTER

AGC

25.......

AUTO

---

NORMAL

•AUTO: The iris is automatically activated upon illumination.

•MANUAL: Manual iris configuration. Set 'IRIS' to 'MANUAL' using the LEFT or

RIGHT button and then press the SET button. Increase or decrease iris level using the LEFT or RIGHT button while verifying the changes on screen.

•A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode

•ESC: Automatic shutter speed setting (optimal)

•MANUAL: Manual shutter speed setting

2. If you choose ‘MANUAL’, select the optimal shutter speed.

· In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).

* 'Sens-Up' mode can be configured manually (2x to 128x).

· Verify changes made to the shutter speed by referencing to changes in on screen brightness.

SHUTTER : Control image brightness by adjusting shutter speed.

1. Position the indicator over 'SHUTTER' using the UP or DOWN button. Then select the desired shutter mode (A.FLK, ESC, MANUAL) using the LEFT or RIGHT button.

EXPOSURE SETUP

BRIGHTNESS

IRIS

SHUTTER

AGC

SSNR

25.......

AUTO

---

NORMAL

LOW

COLOR CCD CAMERA

30

User’s Manual

3. Press the SET button to complete.

Notes

• Image may become unstable if the camera is set to 'ESC' mode and faces a strong fluorescent light.

• Under 'ESC' mode, the brightness can be adjusted using the LEFT or RIGHT button.

• The WDR feature is not available under MANUAL mode.

• Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.

COLOR CCD CAMERA

31

User’s Manual

Operating Your Camera

AGC (Auto Gain Control): For brighter images.

1. Position the indicator over 'AGC' using the UP or DOWN button.

2. Set 'AGC' to the desired mode using the LEFT or RIGHT button.

•HIGH

: Wide range gain value adjustment

•NORMAL : Normal range fain value adjustment.

•OFF

: Disabled

EXPOSURE SETUP

BRIGHTNESS

IRIS

SHUTTER

AGC

SSNR

SENS-UP

25.......

AUTO

---

NORMAL

LOW

OFF

SSNR(Samsung Super Noise Reduction): On screen noise reduction.

1. Position the indicator over 'SSNR' using the UP or DOWN button.

2. Set 'SSNR' to the desired mode using the LEFT or RIGHT button.

•LOW

: Low noise reduction

•MIDDLE : Medium noise reduction

•HIGH

: High noise reduction

•OFF

: Disabled

EXPOSURE SETUP

BRIGHTNESS

IRIS

SHUTTER

AGC

SSNR

SENS-UP

25.......

AUTO

---

NORMAL

LOW

OFF

COLOR CCD CAMERA

32

User’s Manual

Notes

• Changing 'AGC' setting from NORMAL to HIGH results in greater sensitivity, as well as on screen noise.

• Setting 'AGC' to OFF locks 'SSNR' configuration.

SENS-UP : This feature ensures clear images at night or under low lighting conditions.

1. Position the indicator over 'SENS-UP' using the UP or DOWN button.

2. Set 'SENS-UP' to the desired mode using the LEFT or RIGHT button.

•AUTO : Select this mode for use in night time or under low lighting conditions.

•OFF

: Disabled

BRIGHTNESS

IRIS

SHUTTER

AGC

SSNR

SENS-UP

END

EXPOSURE SETUP

25.......

AUTO

---

NORMAL

LOW

OFF

Notes

• Once 'AUTO' mode is set, the user can configure Sens-Up limit by increasing

/decreasing the shutter speed (e.g.: x2,...,x32, x64,..., x128).

• Enabling Sens-Up increases camera sensitivity and may result in additional noise and/or other phenomenons. This is normal.

COLOR CCD CAMERA

33

User’s Manual

Operating Your Camera

SPECIAL

SPECIAL SETUP

USER PRESET

PRIVACY

OFF

OFF

DAY/NIGHT

SYNC

COMM ADJ

IMAGE ADJ

END

COLOR

INT

1. Press the SET button to access the main setup menu and then position the indicator over 'SPECIAL' using the UP or DOWN button.

2. Press the SET button to confirm.

USER PRESET:

Preset user-designated configurations using this feature. Position the indicator over 'USER PRESET' using the UP or DOWN button and then set to 'ON' using the

LEFT or RIGHT button. Press the SET button to confirm.

SPECIAL SETUP

USER PRESET

PRIVACY

OFF

OFF

DAY/NIGHT

SYNC

COMM ADJ

IMAGE ADJ

END

COLOR

INT

COLOR CCD CAMERA

34

User’s Manual

•PRESET NO : Up to eight different preset configurations are supported.

USER PRESET SETUP

PRESET NO.

PRESET MODE

PRESET SAVE

PRESET CLEAR

END

NO. 1

OFF

PRESET DEFINED

•PRESET MODE: Configure initial settings under FOCUS, EXPOSURE, etc.

•PRESET SAVE: Save configured preset.

USER PRESET SETUP

PRESET NO.

PRESET MODE

NO. 1

OFF

PRESET SAVE

PRESET CLEAR

END

PRESET DEFINED

COLOR CCD CAMERA

35

User’s Manual

Operating Your Camera

•PRESET CLEAR: Clear configured preset.

USER PRESET SETUP

PRESET NO.

PRESET MODE

PRESET SAVE

NO. 1

OFF

PRESET CLEAR

END

PRESET DEFINED

•END: Revert to the SPECIAL SETUP menu.

USER PRESET SETUP

PRESET NO.

PRESET MODE

PRESET SAVE

NO. 1

OFF

PRESET CLEAR

END

PRESET DEFINED

PRIVACY: Mask privacy area using this feature. The mask area expand/contract upon the zoom position.

SPECIAL SETUP

USER PRESET

PRIVACY

DAY/NIGHT

SYNC

COMM ADJ

OFF

OFF

COLOR

INT

COLOR CCD CAMERA

36

User’s Manual

•GROUP SEL

: Choose up to eight groups. Each group can consist of four mask areas.

•AREA SEL

: Configure eight mask areas.

•AREA MODE : Mask area display.

•MASK TONE : Adjust desired mask color level.

•TOP

•BOTTOM

: To move the mask area up.

: To move the mask area down.

•LEFT

•RIGHT

: To move the mask area left.

: To move the mask area right.

DAY/NIGHT: Select from COLOR, BW or AUTO modes.

SPECIAL SETUP

USER PRESET

PRIVACY

DAY/NIGHT

SYNC

COMM ADJ

IMAGE ADJ

END

OFF

OFF

COLOR

INT

•COLOR : Color mode.

•B/W : BW mode.

•AUTO1, 2 : The camera automatically detects lighting conditions and selects the mode accordingly. Auto 1 mode is switched to IR Cut Filter more lightning conditions than Auto 2.

Notes

• When selecting AUTO2 mode, the AGC is fixed at HIGH mode.

COLOR CCD CAMERA

37

User’s Manual

Operating Your Camera

SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK.

In LINE-LOCK mode, it synchronizes the camera’s video out signal to the external

SYNC signal.

SPECIAL SETUP

USER PRESET OFF

PRIVACY

DAY/NIGHT

OFF

COLOR

INT SYNC

COMM ADJ

IMAGE ADJ

•INT : Internal synchronization

•LL : External line-lock synchronization

· If you choose ‘LL’, you can adjust the desired phase.

Press the SET button.

· You can adjust the desired phase from 0 to 359.

Notes

• For NTSC models, the line-lock mode can be used if the external SYNC signal frequency is at 60Hz.

• For PAL models, the line-lock mode can be used if the external SYNC signal frequency is at 50Hz.

COMM ADJ: Use this feature to select communication protocol . Position the indicator over

'COMMUNICATION' using the UP or

DOWN button.

COLOR CCD CAMERA

38

User’s Manual

•CAM ID : Assign ID number to the camera. It is restricted available to set ID from

0 to 255.

•DISP CAM ID: Displays camera ID on top left corner of the screen.

•BAUD RATE : Configure baud rate from 2400bps, 4800bps, 9600bps, 19200bps,

38400bps and 57600bps.

•UART MODE : Configure parity bit to NONE, EVEN, or ODD. Data bit is set to 8bit, and stop bit to 1bit. Set the UART MODE to EVEN if using the

Remote Controller.

•RET PKT

•END

: Used to transfer a packet.

IMAGE ADJ: Includes image quality or special function factors.

•FREEZE

: Use this feature to freeze capture an image.

•H-REV

•V-REV

: Use this feature to horizontally inverse the screen.

: Use this feature to vertically inverse the screen.

•SHARPNESS

: Increasing this value sharpens object edges. Too high of a setting, however, produces noise and may obscure the image.

•COLOR AGAIN : Adjusting this value affects the chroma level only; the burst level is unaffected.

END: evert back to the USER PRESET menu.

RESET

To reset your camera to factory default condition.

EXIT

To finish setup menu.

COLOR CCD CAMERA

39

User’s Manual

Troubleshooting

Refer to the following table if you are experiencing trouble with your camera.

Contact an authorized technician if the table does not provide you with a solution to the trouble.

Problem

No display

Solution

• Check the power cable and the wiring between the camera and the monitor.

• Ensure proper video cable connection (Video Out

Jack).

Dim display

Dark display

The camera is not functioning properly and its surface is hot

Motion Detection feature is not active.

Uneven colors

Flickering

• The lens could be dirty. Clean with a soft, clean piece of cloth.

• Adjust monitor settings.

• Adjust camera position if exposed to a strong light source.

• Adjust the monitor's contrast level.

• Set the intermediate device, if in use, to 75Ω/ Hi-z

(refer to p.13).

• Check the power source for compliance with specifications.

• Ensure that the feature is set to ON.

Can't select LL mode

LL is not function properly.

• Adjust and configure WHITE BAL.

• The camera may be facing the sun or a fluorescent light. Adjust the position of the camera.

• The camera may be connected to a DC power source. Connect to an AC power source.

• Check external SYNC signal frequency (should be

60Hz for NTSC, 50Hz for PAL).

COLOR CCD CAMERA

40

User’s Manual

Specifications

P

O

W

E

R

O

P

T

I

C

S

S y n c.

C

C

D

E

L

E

C.

Input Voltage

Input Current

Power Consumption

Size

Total Pixels

Effective Pixels

Optics

Min. Focus Distance

D. ZOOM

Angle Field of view

Scanning System

Synchronization

Frequency

Resolution

Video Output

S/N (Y signal)

Min. Illumination

Backlight Compensation

Day & Night

Gain Control

White Balance

Electronic shutter speed

O.S.D

Motion Detection

SSNR

Focus

Zoom Movement Speed

IRIS Control

Lens Initialize

Camera Title

SVD-4300(W)N SVD-4300(W)P

AC24V(±10%), DC 12V(±10%)

290mA(Steady-state)

460mA(Zoom, Focus, Day&night motor operating)

DC12V/ AC24V - 3.5W Normal,

- 5.5W Max(Zoom, Focus, Day&Night motor operating)

1/4 inch, Interline Transfer CCD

811(H) x 508(V) 795(H) x 596(V)

768(H) x 494(V) 752(H) x 582(V)

10X, f=3.8 to 38.0mm(F1.8)

1,500mm

OFF/ON (X2 ~ X10)

H : Appr. 51.2˚(Wide) to 5.58˚(Tele)/V : Appr. 39.3˚(Wide) to 4.27˚(Tele)

2:1 Interlace

Internal / Line-Lock

H: 15.734KHz / V: 59.94Hz H: 15.625KHz / V : 50.00Hz

500 TV Lines(Min.) : Color (WIDE) / 570 TV Lines(Min.) : B/W (WIDE)

CVBS : 1.0Vp-p/75Ω(VBS EXT)

50 dB (AGC Off, Weight ON)

[email protected], [email protected](Sens-up), Color/[email protected](B/W)

LOW/MIDDLE/HIGH/OFF Selectable

Auto1, Auto2, COLOR, B/W(ICR)

Normal, High, OFF Selectable

ATW (INDOOR(3,000K~10,500K), OUTDOOR (1,800K~10,500K))/AWC/MANUAL

AUTO (X128~1/60sec~1/120,000sec)

Sens-up and Sens-up Limit is selectable, Flickerless

AUTO (X128~1/50sec~ 1/120,000sec )

Sens-up and Sens-up Limit is selectable, Flickerless

Built-In

ON/OFF(4 Programmable Zone per Screen)

Low, Middle, High, Off

Auto / Manual / One push

1.67sec : Wide to Tele 1.75sec : Wide to Tele

Auto, Manual

Built-In

OFF/ON (Displayed 15 characters)

COLOR CCD CAMERA

41

User’s Manual

Specifications

SVD-4300(W)N SVD-4300(W)P

Communication

E

L

E

C.

Privacy Function

FLIP

Preset

Operating

Temperature/Humidity

Dimension

Weight

RS485 External Control(TRX+,TRX-) 2400bps, 4800bps, 9600bps, 19200bps,

38400bps and 57600bps selectable

SAMSUNG TECHWIN PROTOCOL AVAILABLE

PELCO-D PROTOCOL AVAILABLE

ON/OFF(32Zones, It consists of 8Group 4Programmable Zone per Screen)

Vertical, Horizontal, Vertical-Horizontal, OFF Selectable

8 Positions

-10˚C to +50˚C / 20% to 80% RH

Ø150 x 130mm(H)

1.4 kg

* SVD-4300WN, SVD-4300WP : Ivory color base model

COLOR CCD CAMERA

42

User’s Manual

Ø 148mm

Dimension

126mm

85mm

83.5mm

85mm

COLOR CCD CAMERA

43

User’s Manual

DECLARATION OF CONFORMITY

Application of Council Directive(s) 89 / 336 / EEC

Manufacturer's Name SAMSUNG TECHWIN CO., LTD

Manufacturer's Address SAMSUNG TECHWIN CO., LTD

42, SUNGJU-DONG CHANGWON-CITY,

KYUNGNAM, KOREA, 641-716

European Representative Name

European Representative Address

Equipment Type/Environment

Model Name

Beginning Serial NO.

Year of Manufacture

Conformance to

CCTV Camera

SVD-4300P/WP

S8040001

2008. 12. 01

EN 50081-1 : 1992

EMC-Directive 89/336 EEC and 92/31/EEC

EN 50130-4 : 1996

We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s).

Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe

Signature Signature

Full Name

Position

HAN SEUG KIM Full Name

QUALITY CONTROL MANAGER Position

Date 2008. 12. 01

Place

Date

MEMO

MEMO