I ,�

�

Fantastic

Version 1.2

A

B

Two People

Required

Note: Assembly has two options: A or B

Cabin

Bunk Twin Light Oak

www.fantasticfurniture.com.au

Helpful bunk bed safety tips

B unk beds should be checked periodically to ensure that the guardrail, ladder and other components are secure and in the correct position and all connectors are tight.

W e recommend that children under the age of nine (9) do not use the upper bunk. Children should be discouraged from playing on the bunk bed.

No more than one occupant should use the upper bunk at any time

(unless otherwise stated).

B unk beds should be placed a minimum of 2 metres away from any ceiling fans to prevent any injury to the upper bunk occupant.

Looks like you've found your Fantastic!

We're thrilled you've chosen Fantastic Furniture to help create a home you'll love!

Love it? Share it!

Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card!

@fantasticfurniture www.fantasticfurniture.com.au

A

Furniture

Page 2

the instructions

Assembly checklist

Read through the instructions carefully before you begin.

Make sure you have all the required tools.

Never use power tools unless instructed.

Identify and lay out all of the components before you begin assembly.

Unless instructed, do not fully tighten screws until the item is fully assembled.

Useful Information

! Never use power tools unless specifically instructed. They can damage your components or hardware if used incorrectly.

! The most common mistakes made during assembly are using the wrong hardware or getting components back to front.

! Always use a soft surface (such as carpet or cardboard) when assembling your product to avoid scratching or damaging the surface of the product.

! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be used as they may not fit through a door once assembled.

! Never use any glue until you are certain that the parts belong together.

! Periodically check and re-tighen all fasteners. Check the product care label or website for product care instructions.

! If you are having any di culties assembling your product, missing any hardware or components please visit our website Help Centre for further assistance.

www.fantasticfurniture.com.au

Page 3

What you need

e mble t�e prod�

�

1

DONOTUSE''

Other tools you need:

Flat head screwdriver, Phillips head screwdriver, Mallet (soft headed);

Parts list

Box 1:

1 x Headboard (P4);

1 x Footboard (P5);

Box 2:

1 x Front Board (P6);

Box 3:

1 x Back Lower Side Rail (P1);

2 x Back Support Panel (P2)

1 x Back Upper Side Rail (P3);

2 x Middle Bedbase (P10);

Box 4:

4 x Short Support Panel (P7);

8 x Long Support Panel (P8);

4 x Left and Right Bedbase (P9);

2 x Middle Bedbase (P10);

Hardware pack

1 x Allen Wrench

(H1)

20 x Dowels (L30mm)

(H5)

20 x Bolts (M6x60)

(H2)

44 x Bolts (M6x30)

(H3)

40 x Screws (L30mm)

(H4)

�

20 x Nuts

(H6) www.fantasticfurniture.com.au

A

Furniture

Page4

Step1

You will need

'

20 x Dowels

(H5)

·,

Flat head screwdriver

�

Hammer

Insert 20 x Dowels (H5) into Panels (P1),(P2),(P3),(P6) .

I

Step2

You will need

'

32 x Bolts

(H3)

·,

Phillips head screwdriver

Attach 8 x Long Support Panels (P8) to

Panels P1, P3, P6 by using 32 x Bolts (H3) .

www.fantasticfurniture.com.au

Raw edge

(Face down)

Raw edge

(Face upward)

Raw edge

(Face down) Furniture

Page 5

Raw edge facing upwards Step3

'

12 x Bolts

(H3)

·,

Phillips head screwdriver

Attach 4 x Short Support Panels (P7) to Headboard

(P4) and Footboard (P5) by using 12 x Bolts (H3) .

Step4 facing incoming bo� ✓ / ,,

--------i�-�;-�:.,_c_'.<

� ,

,�✓

.J

H�

You will need

� X '.

--·

' �:�'

) � �

'

5 x Bolts

(H2) '

1 x Allen Wrench

(H1)

�

5 x Nuts

(H6)

P5

�\ -----,

:,:·-------

__ ,

:

�\ __ _ p

�

Two People

Insert 5 x Nuts (H6) into Panels (P6)

Attach panels (P6) to panels (P5) using 5 x Bolts (H2), tighten with allen k ey .

Ensure the slot on nut is facing incoming bolt

Required www.fantasticfurniture.com.au

Option B

Furniture

Page6

Ensure the slot on nut is facing incoming bolt

Step5

You will need '

�

5 x Nuts

(H6)

5 x Bolts

(H2) ' '

1 x Allen Wrench

(H1)

I

'' '

, ,

' ,

'

' ' '

' --

'\ (H1)

---�L_ __

'

'

,'

,-

'

'

---P4

- - - - - --- -- -.. -- .. ------==I:'··--

,

-'

\

Option A

Insert 5 x Nuts (H6) into Panels (P6) .

Attach panel (P6) to panels (P4) using 5 x bolts (H2) .

Option B

Two People

P4

Required www.fantasticfurniture.com.au

A

Furniture

Page?

Step6

You will need '

4 x Nuts

(H6)

�

4 x Bolts

(H2) '

1 x Allen Wrench

(H1)

,

,

,

,

'

' ' '

'

(H6) \

' ' '

' ' --

Ensure the slot on nut i� facing incoming bolt

--

-----------

Option B

P5

P5

Insert 4 x Nuts (H6) into Panels (P1) .

Attach panel (P1) to panels (P4) & (P5) using 4 x bolts (H2).

P4

Two People

Required www.fantasticfurniture.com.au

A

Furniture

Page8

Step7

Option A

·p

2

Attach panel (P2) to panel (P1) .

Option B

·P2

P5 www.fantasticfurniture.com.au

P4

Furniture

Page9

Step8

You will need ' x Allen Wrench

(H1)

6

1 ' x Bolts

(H2)

�

6 x Nuts

(H6)

Insert 6 x Nuts (H6) into Panels (P2) & (P3).

Attach panel (P3) & (P2) to panels

(P4) & (P5) using 6 x bolts (H2).

Option B

'

'

P2

Two People

P3

Required www.fantasticfurniture.com.au

Ensure the slot on nut is-facingJ_�_coming bolt

P4

Furniture

Page 10

Step9

Option A

Make sure the inner space is square.

Then attach 4 x Middle Base Panels (P10) and

4 x Left & Right Base Panels (P9) to the bunk by using 40 x screws, tightening with a phillips head screwdriver.

Option B

www.fantasticfurniture .com.au

Furniture

Page 11

Step 10

Option A

Option B

Job Complete!

In the interest of our environment please dispose of all packaging thoughtfully www.fantasticfurniture.com.au

Furniture

Page12