advertisement
![CE-Link DPV01 User manual | Manualzz CE-Link DPV01 User manual | Manualzz](http://s1.manualzz.com/store/data/006983164_1-4c829b3dd14184342ac4e67ae5ae0daf-360x466.png)
DisplayPort to VGA Converter
USER MANUAL
Table of Contents
1.0 Introduction ……………………………………………….....2
2.0 Specifications …………………………………………..……2
3.0 Package Contents …………………………………………...3
4.0 Panel Descriptions …………………………………….....…3
5.0 Connection and Operation
………………………………...4
1
DisplayPort to VGA Converter
DisplayPort to VGA Converter
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This is a DisplayPort to VGA signal format converter for interfacing next generation DisplayPort based PC and notebook computers with conventional
VGA displays, such as CRT, LCD monitors, and projectors. DisplayPort offers a unified, scalable, and cost effective interface for embedded and external display applications. As desktop and notebook PCs are increasingly transitioning from conventional analog type interfaces to DisplayPort, the converter facilitates the transition by offering seamless connectivity between new DisplayPort PC and notebooks and the installed base VGA monitors and projectors.
It offers solutions for digital entertainment center, projector factory, noisy space and security concerns, conference room presentation, school and corporate training environments.
1.1 FEATURES
This DisplayPort to VGA converter has many features that enable it to perform in a superior manner. Among those features you will find:
● DisplayPort 1.1a compliant receiver offering 5.4 Gbps bandwidth over 2 lanes
● Integrated triple 10-bit, 162 MHz video DAC for analog VGA signal output
● Supports up to 1080p, 1920 x 1200 reduced blanking video resolution
● EDID pass-through from PC source to display
● Spread Spectrum (de-spreading) for EMI reduction
● Automatic sink detection
● Low power standby mode operation initiated based on sink detection status
● Powered from DisplayPort source
● 3.3V IO, 1.2V Core
● Low power operation – Active 400mW, standby mode 15mW
Note: For few display cards, the image would not appear until the PC enters into Windows from DOS at the time of restarting.
2
DisplayPort to VGA Converter
2.0 SPECIFICATIONS
Signal Inputs/Output
Maximum Single Link Range
Video format supported
VGA
Operating Frequency
1920X1200, 1080P
Max to1920x1200
Vertical Frequency Range
Video Amplifier Bandwidth
Mechanical
Size(L×W×H)
Weight(Net)
Warranty
Limited Warranty
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Power Requirement
Accessories Adapter
User Manual
50/60Hz
162MHz
68X35X19.5MM
22g
1 Year Parts and Labor
0 ℃ to +70℃
10% to 85 % RH (no condensation)
-10℃ to +80℃
5% to 90 % RH (no condensation)
No
English Version
Note: Specifications are subject to change without notice.
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: l Main unit. l User's Manual
4.0 PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the structure.
3
DisplayPort to VGA Converter
5.0 CONNECTION AND OPERATION
1) Connect the DisplayPort male to DisplayPort source device
2) Connect the VGA female to display by VGA M/M cable
If you use DisplayPort F/F coupler, please use special DisplayPort cable with 20th pin connected
Attention: Insert / Extract gently.
5.1 CONNECTION DIAGRAM
4
P/N0009
advertisement