Unbranded 08239206014 Replacement Light Shade for Rothley Fans Only Instructions


Add to my manuals
1 Pages

advertisement

Unbranded 08239206014 Replacement Light Shade for Rothley Fans Only Instructions | Manualzz

Assembly - Attaching the Lights

Installing the bulbs and shatter resistant bowl

WARNING: Allow the shatter resistant bowl to cool completely before removing.

CAUTION: Make sure the power is off before attaching or removing the shatter resistant bowl.

CAUTION: Do not over tighten the hex nut, overtightening the hex nut may cause the shatter resistant bowl to break.

Remove the finial and the bottom cover from the threaded nipple of the light kit fitter assembly (E).

With the power off, install the two LED bulbs (I) by screwing them into the light bulb sockets.

Position the shatter resistant bowl (H), re-install the bottom cover over the threaded nipple, and direct the fan pull chain through the side hole of the bottom cover.

□ Re-install the finial over the threaded nipple and direct the light pull chain through the hole of the finial, and tighten the finial securely.

□ Attach the pull chain extensions (GG) provided to the light pull chain and fan pull chain.

GG

D

E

H

I

Assembly - Assembling the Fan Without the Light Kit

1

Assembling the fan without the light kit

□ In order to use the fan without the light kit, remove the switch cup cover (WW) from the top of the light kit fitter assembly (E) by removing the center hex nut inside the switch cup cover (WW), and then thread the switch cup cover (WW) off of the threaded nipple on the top of the light kit fitter assembly (E).

Press the plastic plug (FF) into the center hole of the switch cup cover (WW).

Remove the three screws (V V) on the switch cup cover

(WW).

□ Align the three holes in the switch cup cover (WW) with the three holes in the switch cup of the fan-motor assembly (D). Make sure the notch in the switch cup cover (WW) clears the reversing switch in the switch cup of the fan-motor assembly (D).

□ Re-install the three screws (V V) that were removed in first step to secure the switch cup cover (WW).

V V

GG

WW

FF

13

D

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement