ISun GPS navigator User manual
Below you will find brief information for GPS navigator. This document provides a comprehensive guide to using the GPS navigator, covering topics such as power supply and charging, basic use, navigation functions, audio player, picture skimming, E-book, video player, system settings, and Bluetooth functionality.
Advertisement
Advertisement
GPS Navigator Manual
Welcome to use this GPS navigator
The company (iSun) keep the final explanation right on this user’s manual.
This manual is subject to changes without prior notice.``````
Please copy your important data as our company takes no responsibility for the loss of data.
This manual has been reviewed.But we can not ensure the preciseness without any mistakes or error. Please contact our service center when a mistake gets discovered.
Please read carefully the operations and instructions on user’s manual and use the accessories only provided by the original factory to avoid unexpected damages. If you don’t use it according to the correct process or connect the incompatible accessories, the guarantee will be automatically invalid and this can even cause hurt to you and others. Our company would not take the responsibility for this.
It is possible that the electronic navigation data is not consistent with the real traffic instructions because of the traffic construction development. Please do comply with the real condition and obey the traffic rules. It will probably cause a serious accident if you check or use the navigator when you are driving, and our company will not take the responsibility for any loss.
The updating and upgrading information on firmware will be put on our website. It’s depend on you weather or not to update or upgrade.
The pictures on the manual is just for reference, subject to the real machine
Welcome to use
................................................................................................. 4
............................................................................................ 6
TABLE LIST AND PRIMARY FUNCTION
................................................................................................. 8
....................................................................................... 9
NAVIGATING FUNCTION AND FEATURE
.............................................................................................. 11
1.1 Packing
The following accessories are contained in the GPS box, please check it:
1 . GPS receiver.
2 . Adaptor.
3 . Car light adaptor
4 .MINI USB line
5 .Car-use antenna
6 . Earphone.
7 . User’s manual.
8 . Windscreen mount.
1.2 The use of the manual
In order to take the best function of your machine, and acquire more operate details, please read the User’s manual carefully.
On the using process, you will see the following supplementary information.
【note】: Explanation on topic;
【relative information】: Expand information on relative topic
【important】: warning indication on relative topic. Please pay more attention on this information and comply with the operation, otherwise, you will hurt your self and others.
This User’s manual is only applicable for GPS navigation product.
In this Chapter we will introduce the outer equipment and their basic operation to let you familiar with all the basic operations as soon as possible.
2.1 Features
1 Touch-screen
2 Charging indication light.
3
7
MINI USB port
4 Reset key
5 Stereo earphone jack
6 SD/MMC card slot
Power key
Display main menu
Indicates weather the outside power is linked; it is red when charging and turn blue after well charged.
Communicate with computer through MINI
USB/connect adaptor
Reset the system
Connect stereo earphone
The machine is attached with the SD/MMC card, which contains the map firmware, map data, and user’s file. Please don’t take the card out when the machine been using
【note】If you pull out the card for during use please press the resetting key on the left side to activate the system.
Power on/ off
8 Menu
9
Bluetooth indication light
10
11
12
Outside speaker
GPS receiver
Touch stick
Return to the table list
Power off: when Bluetooth closed,
Twinkle: when Bluetooth opened but disconnect with mobile phone,
Power on: when connect with mobile phone
Play sound (such as voice indication, music etc)
Unfold the GPS receiver to the level position to receive satellite signal.
It is used to click and write on the screen. Draw it out when using, Draw it back after used.
2.2 Power supply and charge
Give full overnight charge before use.
2.2.1 Power supply
Types of supply power for this GPS device: Battery and Eternal power.
The GPS navigator uses the Li-battery to supply power when it is not connected with adaptor.
The symbol [ screen.
] on the up right of receiver and the symbol [ ] on the
GPS navigator uses the External power supply when it is connected with the adaptor.
【note】This machine has a built-in, unchangeable Lithium battery. Under normal conditions (if the back light is not so bright), a fully charged battery can be used for up to 10 hours. This may vary with the type of use. Some functions (audio playing, video playing, bright back light) will consume a large quantity of battery power, which can reduce the usage.
【Important】This machine has a built-in, unchangeable Lithium battery. In order to avoid fire and burning, please do not dispose of this GPS unit in the fire.
2.2.2 Charging by adaptor
At the first use, you should use the adapter to charge the navigator.
1.
Connect the DC of adaptor to the electric port on the right part of the machine;
2.
The other end is connected with electric socket to supply power and also charging at the same tine.
【note】The indication light is red when charging. Please do not pull out the adaptor until the light turn blue as it is well charged.
2.2.3 Charging by car light adaptor
1. Please connect one end of the car adaptor to the electric port on the right part of the machine.
2. The other end is connected with the car adaptor to supply power and also charging at the same time.
【Important】To avoid a power surge and damage to your receiver it is necessary that you plug the device into the car only after the engine is running.
2.3 Basic use
2.3.1
Switch on/off
The battery switch [ ] on the right part of the receiver is used to control the system power supply
Upward switch [ ] indicates that supply power is by battery or adaptor.
Downward switch [ ] indicates to cut off the power and the system cannot be started.
【Note】When the switch is off, it can still charge the machine as it is just cuts off the system
power supply.
2.3.2 Power on/off
The power key [ ] can control the power on/off. Power off indicates the system is saving power; the system can keep the last operation position when you power on again.
1. Power on:
Please check：The battery is well charged, or the machine is connected with adaptor and the switch is upward [ ].
Press the “power” key * ] on the top of machine to power on.
【Important】When you carry the machine from one place to another, you need to wait until the machine is adapted to the environment to avoid short circuit caused by the humidity fluctuation.
2. Power off
Please press the Power key [ ] on top of the receiver to power off. The system will enter the sleep mode and the system can keep the last operation position when you power on again.
【Note】If you want to save the power, you can press the switch downward to cut off the electricity.
2.3.3 Resetting system
If the system cannot work, you can reset the system in the following two ways.
1. Click the reset key on the right part of the machine to reset the system by using touch stick.
2. Press the switch downward to cut off the power supply. Then press it upwards again to reset the system.
【Information】：It may not respond in the following conditions.
1. The shift between pictures is delayed.
2. The touch stick function does not work normally.
3. The power key does not work.
【Important】The unsaved data will be lost as you reset the system when the system has no response. Please copy the data other time.
2.3.4 Windscreen mounting
When using the GPS receiver in your car, you should fix this machine down to the panel of the windscreen by using the suction bracket.
【Important】When using the bracket, please take care of the position. Please don’t fix the navigator to a position that will block or distract the driver line of sight with the road.
2.3.5 Car antenna
The car-use antenna can improve the ability to receive the signal. Connect one end to the car antenna hole [ ] on the right part of the navigator; another end is absorbed with the roof.
【Note】The navigation function is affected with the GPS receiving ability, position accuracy and position speed. If you need the function when you are driving, we suggest you use the car
antenna.
2.3.6 Touch stick
The touch stick is the communication tool between you and your navigator. Please keep it carefully.
一、single click ：
Single click the screen with the touch stick point。
二、double click：
Double click the screen with the touch stick point.
三、drawing：
Click one point and hold, and then draw the touch stick on the screen.
【Important】A broken touch stick, ball pen or any acute and harsh object will scratch and destroy the LCD.
2.3.7 SD/MMC card
The attached SD/MMC card contains the map software, map data and media file. Please insert the card correctly when in use.
【Important】Please do not take out the SD/MMC card when the system is navigating or playing.
【Important】
1.
Don’t bend, stress or curve the SD/MMC card.
2.
Avoid high temperature or high humidity when in use and store the card, don’t put the card direct to sunlight.
3.
To avoid damage, please pay attention to the heading when inserting the SD/MMC card.
2.4 Connect with computer
The machine can be connected with the computer through the MINI USB on its left part. You can copy files between navigator and computer or copy the data from GPS navigator to computer so as to recover the data in GPS when you are in need of them.
1. Please confirm the GPS navigator is power on;
2. Connect the MINI end [ ] of USB cable with the USB port on the left part of GPS machine and the normal end [ ] with the Host port on computer.
3. After connection, the computer can recognize and find the new hardware unit automatically.
GPS navigator will stop operating the current procedure and shift to the online interface.
4. Please pull out the MINI USB cable as you finished your operation, the GPS navigator will return to the pre-operation interface.
【Important】Data security: Please copy the data to the outer storage device every time before you update your system data. Our company takes no responsibility for any loss of data.
【Note】The GPS navigator will stop any other operation when it is connected with computer.
【Important】In the process of communication, the following operations will break off the connection with computer, the unfinished data will be lost.
1. Pull out the MINI USB cable;
2. Power off
3. Reset the system by using resetting key or electric switch
4. Click the close button on the top right corner.
2.5 Table list and primary function.
1. Table list:
2. Function introduction：
Navigation
Afford the navigation reference
Video player Video playing format: wmv, asf and avi.
Support schedule adjustment, pause, full screen playing.
Photo skimming Photo format: JPG, GIF, BMP, PNG.
Support picture revolve, picture zoom, and power point.
E-book Text format: txt.
Support page option
Audio player
Setting
Audio playing format: WM9, MP3, WAV.
Support random playing, sequence playing, repeat playing
Volume, power, backs light, date and time, language, system information.
2.6 Protect your GPS navigator.
The GPS navigator is a reliable navigator if it’s protected correctly.
Screen protection: Please use the touch stick to operate when pressing the screen. For cleaning the screen, you should use a soft cloth sprinkled with a few drops of glass cleaner.
Do not spray the cleaner directly onto the screen.
【Important】Please do remember to power off the GPS navigator before cleaning the screen.
Avoid dropping: Dropping or striking will damage the screen.
【Important】Accidental damage is not covered under the warranty.
Avoid using the navigator at the following condition: rapidly changed temperature, high temperature (over 60 deg), low temperature (below 0 deg), high pressure, much dust, static,
humidity, and also corrosive liquid.
Avoid radiation: the radiation from other electric device may influence the screen display. It will be recovered by exclude the radiation.
【Important】We suggest you to take the gift bag to get the X- ray detection when you need air transport. This can help you avoid magnetic detection and bar magnet detection, which will damage the system data.
In this chapter we will introduce some important notices on how to use the GPS navigator
3.1 Navigation functions and features
According to your choice of navigation system, the GPS navigator can make a position by GPS satellite signal receiver and display it on the navigation map. The system can calculate the best route after setting the destination; this can help users to arrive at the destination safely and rapidly.
The specific navigation functions are depended on your choice of navigating software. Please refer to the Navigation Software Instruction
3.2 The important knowledge
1. Map information
It is possible that the electronic navigation data is not consistent with the real traffic instructions because of road construction and development. Please only comply with the road layout, conditions and the actual traffic rules. New layouts will be available at a later date from the
.
website. See map instructions for details.
2. Navigation
The navigator offers the route for reference only; determine the route by yourself; the driver may be more familiar with the route than GPS navigator.
3. On receiving signal.
Many factors such as high, dense buildings (in tunnels, between the high buildings, underground parking) various weather conditions, and closure of the satellites will affect the ability to receive signals and navigate accurately. Beware of these conditions.
This chapter will introduce how to use the built in audio player on the GPS.
4.1 Functions and features
The audio player supports WMA9, MP3 and WAV music format, you can set the playing sequence at random
Before using the audio player, please copy your audio files to another folder.
4.2 Interface operation
1. Singly click the button in main menu to open the audio player as the following picture 4-1:
Close
Play
Pause
Stop
Play list
Picture 4-1 audio playing interfaces
Last song
Next song
Single click to close the audio player.
Single click to play or stop
Single click to pause
Single click to stop
Support sequence playing, random playing, and repeat playing
Play the previous item
Play the next item
Volume adjust
Progress choice
File
Song title, format
2. Music file interface:
Time
Playing list
Use the touch stick to adjust the volume by sliding the volume-displaying bar, go left to turn down, go right to turn up.
Use the touch stick to adjust the progress by slide the progress-displaying bar; go left to back up, go right to advance.
Single click to shift to the audio file interface and choose you favorite music.
Show the song title and the playing format.
Show the elapsed time
Show the playing order
Close
Last page
Next page
Go back
File name
Picture 4-2 music file interface
Single click to close the playing file.
Show the last page
Show the next page
Return to the previous file
The name of the playing file
Song title, format
The title and the audio format of the playing song.
This chapter will introduce how to use the function of picture skimming.
5.1 Functions
1. Support JPG, GIF, BMP and PNG format
2. Support picture revolving, picture zooming, and power point.
Before using the skimming function, please copy your pictures to the storage card.
5.2 Interface and operation
1. Click to open the picture browser showed by picture 5-1.
Picture 5-1 picture browser interfaces
Close
Magnify
Decrease
Revolve
Power point
The last item
The next item
File
File name, format
2. Picture file interface:
Click to close the picture browser
Magnify the picture on proportion.
Decrease the picture on proportion
Click to revolve the picture for 90 degree.
Play all the pictures circularly on full screen from the current picture
Play the previous picture in the same file.
Play the next picture in the same file.
Click to shift to the file interface, and choose your favorite picture.
Show the current picture and its picture format.
Picture 5-1 picture file interface
Close
Last page
Click to close the file
Show the last page
Next page
Show the next page
Go back
File name
Return to the previous file
Show the current file name
Picture title
Show the picture name and the picture format. and format
This chapter will introduce how to use the function of E- book.
6.1 Functions
1. Support TXT format
2. Support page turning, page skip, file choosing.
Before using the function of E-book, Please copy your documents to the storage card.
6.2 Interface and operation
1. Click to enter the text view interface, as picture 6-1 showed;
Picture 6-1 text view interface
Close
Last page
Next page
Page skip
File
Click to close the text viewer.
Turn to last page.
Turn to next page
Click to enter the page-choosing interface as picture 6-2 showed. You can choose any page to read.
Click to enter the file interface and choose the book as picture 6-3 showed.
The text title and format
Show the document name and format.
Page number/
Show the current page number / show the total page total page
2. Page choosing interface.
Picture 6-2 page choosing interface
Close
Numeric keyboard
Numeric display area
Back space
Reset
Skip
Click to exit page choosing interface
Consist of 9 figures from 0 to 9, can compose any number from 0 to 99999999.
Show the input number.
Click to delete the last number
Clear all numbers
Skip to the t page of current number showed and browse the current page.
3. Text file interface:
Picture 6-3 Text file interface
Close
Click to close the current file
Last page
Show the last page
Next page
Show the next page
Go back
Go back to the previous file
File name
Text name
The document name of the current file. and format
The text name and format.
This chapter will introduce how to use the function of video playing.
7.1 Functions
1. Support wmv, asf, avi format.
2. Support full screenplay, progress choosing, and file choosing.
Before using the function of video playing, please copy your video file to the storage card.
7.2 Interface and operation
1. Click to enter the video-playing interface as picture 7-1 showed.
Picture 71 Video playing interfaces
Close
Play
Pose
Click to close the video player.
Indicate the movie is posed or stopped, click again to play continuously
Click to pose the movie
Stop
Click to stop playing the movie.
Fast playing
Click to playing the movie fast
Volume adjusting
Progress choice
File
Title format
Time
Use the touch stick to adjust the volume by sliding the volume-displaying bar, go left to turn down, go right to turn up.
Use the touch stick to adjust the progress by slide the progress-displaying bar, go left to back up, go right to advance.
Click to enter the video file interface, and choose your favorite movie. and
Show the movie title and the format.
The elapsed time/ the total time
2. Video file interface:
Picture 7-2 Video file interfaces
Close
Last page
Next page
Go back
File name
Click the current file
Show the last page
Show the next page
Go back to the previous file.
The current file name
Film title and format
Film title and format
Click to enter “system set” menu, then you can set the relevant functions. There are “voice”,
“power”, and “backlight set “,” date and time “,” language, system info for choice
Voice Adjust the speaker volume;
Turn on / off “click screen volume”
Check the present battery condition Power
Backlight Adjust the screen backlight;
Backlight turn off time interval under self power supply
Backlight turn off time interval under external power supply
Time and date Time set;
Date set;
Time zone set
Language The default language set;
Background style set
System info Return the original implied value;
GPS Reset
Calibrate the touch screen
8.1 volume adjust
“Volume adjusts” include:
1. Speaker volume adjust;
2. “Click screen volume” set
Turn off
Exit “volume adjust” interface;
Volume -
Volume +
The system has 10 levels volume (from calm to loudest), single click can decrease a level
The system has 10 levels volume (from calm to loudest), single click can increase a level
“Click screen
Once chose, it turn on, or it close volume”
Present volume
Red blanks shows the present volume level, a blank is mean a level
8.2 power set
“Power set” is to check the power left and whether charging is on
Turn on
Exit “power set” interface;
Power edition Red blank shows the power left;
The red blank will be filled from left to right when charging
8.3 backlight
Backlight set include:
1. Adjust backlight brightness;
2. Turn off backlight time interval set at self power supply condition;
3. Turn off backlight time interval set at external power supply condition.
Turn off
Exit “backlight set” interface;
Brightness-
Brightness+
Turn left
Turn right
Just click it, the brightness will decrease gradually to the lowest level;
Just click it, the brightness will decrease gradually to the highest level
Single click can turn the interval to left for one time to display the previous blank, repeatedly display
Single click can turn the interval to right for one time to display the previous blank, repeatedly display
Brightness
Red blank shows the present brightness
Time interval The backlight will turn off and enter the power saving mode after stopping to operate the machine. There are
6 items for choice: “never”, “3 min”, “2 min”, “1 min”,
“30 s”, “10 s” and “repeat”.
8.4 Date and time
Date and time include:
1. System time set;
2. System date set;
3. System time zone set.
1. Single click to enter “date” interface (as the following), then click or
to set year, month and date.
2. Single click or to set hour and minute.
to enter “time” interface (as the following), you can single click
8.5 language
Language set include:
1. Default language choose;
2. Background choose
Single click language column
English for choice.
or to do language choose, there are simple Chinese TRA Chinese and
Single click background column
8.6 system info
System info included:
1. Return the original set;
2. GPS Reset；
3. Calibrate the touch screen
or to do background choose, there are blue and yellow for choice
After single clicked single click
, it will come out the “factory default setting” interface (as the following),
to return the factory default setting, and click to shut the
interface
After single clicked , it will come out “GPS reposition” interface (as the following), click
to reposition; click to shut “GPS reposition” interface
After single clicking , it will come out “calibrate touch screen) interface (as the following). Use the touch stick and click the central cross cursor, it will move from in the sequence of center, left up, left down, right up and right down till the calibration is succeeded, then the system will exit to the main menu automatically
We will keep the right of any technology change, and won’t specially announce the change in the future
Size 4.3 inch (dimension:
124*81*19mm)
Weight
Memory card size
190g
To be advise
Battery
Speaker
Headphone
Audio frequency
Built-in Lithium battery, DC 5V/1.5A
1W 8ohm or 2W 4ohm
20 mW/32ohm
WMA9, MP3 and WAV
Video frequency
Photo
E-book
Working temperature
Keep and transporting temperature
Relevant working temperature
Keep and transporting humidity
AVI、MPEG、MPG
JPG、GIF、BMP and PNG
TXT
-10 °C ～ 60 °C
-20 °C ～ 60 °C
20% ～ 80%(40°C)
20% ～ 80%（40°C）
Air pressure
Language
Background
86KPa ～ 106KPa
Simple Chinese / English
Blue / yellow
Operating system
Windows 98 / Me / 2000 / XP / Server2003、Mac OS 9.0 or more advanced version,
Linux2.4.x or more advanced version
IF your GPS navigator is not working normally, please check the following. If you cannot resolve the problems, please contact our service center.
Problem Reason Solution
Can not turn on the navigator
Can not display clearly
Lack of power To be charged by adaptor or car light adaptor
Switch off Upward the switch
The back light is not
Consult 8.3, adjust the backlight bright enough
Touch screen function is abnormal
Without sound
The back light has been turned off
Use the touch stick to click the LCD; the screen will turn bright again.
Touch screen function
Consult 8.6, Emendate it again is not emendated well
The volume is at the lowest condition
Turn up the volume
The earphone can not
Connect the earphone be connected well
Can not communicate with The USB cable is not
Consult 2.4，connect USB cable computer connected well
No signal
The map data is lost
The signal intensity is weak, it need more than 3 minutes to receive the signal
Consult 2.3.5、3.2
1. The map data is included in the disc
2. Contact your agent or distributor
When use the navigating function again, you need to input the password.
8.7 Bluetooth setting & user instruction (optional)
Operating insturction:
1．Click on the main menu, and enter into the interface of Bluetooth setting, picture as below:
Close
Phone keyboard
Phone records
Close the current folder
Dialing calls
Record all dialed, received, missed call of the GPS; at most
20 records for each item
Last call
Pair
Note the last call you dialed
To match the Bluetooth between Bluetooth mobile phone and GPS
Bluetooth setting Set Bluetooth, incoming ring, close Bluetooth
Pair records
Records pair device management and show all the paired devices
Status Bar Show the present pair situation
Remarks:
1. Bluetooth indication light is off when the Bluetooth is closed, it twinkles when Bluetooth is on but disconnects with mobile phone and powers again on again when connection is made with a mobile phone
2. Before dialing calls, please press the call button if the device wasn’t connected, the device will automatically enter into a pairing interface.
2．Click in Bluetooth interface，it will show the Bluetooth setting as below picture:
图 4.7.2
Close
Bluetooth name
Pin code
Click to close the current folder
NVA（be reference）
The setting pin code is showed
Phone
Keyboard
Click and set pin code
Incoming calls Indicating the incoming calls
Select incoming
Click and select incoming call calls
Keep Bluetooth function when
3．
Click on Bluetooth setting, set pin code.
Bluetooth interface closed is
Default is Selected.
Close Click to close the current folder
Numeric display area
Number keyboard
Display the pin code.
Consist of 9 figures from 0 to 9, can compose any number from 0 to 99999999.
Reset Clear numbers
Enter Click to confirm the pin code
【Notice】 After the pin code is re-installed, to pair new phones will no longer input the default "8888", you will need to enter a new pin code.
4 Click on Bluetooth setting to choose calls ring
5． Click pair key
Close
File name
Document name，format
Last page
Click to close the current folder
The document name of the current file
Click document name to choose ring of calling
Turn to last page
Next page Turn to next page
File Click to enter the file interface and choose on the Bluetooth interface, enter the pair interface.
Close Click to close the current folder
The countdown started from the 60s
Pair
Instruction
Pair time
Put the Bluetooth phone near to the GPS and then select "tools" -
"Bluetooth" - "matching device" menu, click "Options" and select "new matching device “. After a few minutes the phone will find new device "XXXX", that is your GPS. Click the "Options", you will be prompted to input Bluetooth devices XXXX pass code, input "8888" then confirm. The phone will show that matching is completed.
The third time that you click the “option” key, select “connect”, after the connecting completed, the menu will appear a loudspeaker signs next to mobile terminal name .our GPS will end the pair interface automatically. The main functions of Bluetooth interface of the status bar will be prompted to "connect telephone calls". The status bar of the phone icon will become red, And then the blue light twinkles.
【Notice】This instruction is up to the Nokia 3280 mobile phone, another models please refers to manual to be paired
6．Click on Bluetooth interface, enter numeric key board interface
Close Click to close the current folder
7．Click
Click to close the current
Show the input number. folder
Numeric key
Back space
Consist of 9 figures from 0 to 9, can compose 20 piece of number，
Click to delete the last number
Calling
Calling records
Click to calling
Click to open calling records
on phone keyboard, input the number
Minimize
Click to minimize the interface
Volume+
Volume-
Numeric display area
Quiet
Increase volume (available on calling)
Decrease volume (available on calling)
Display the calling number
Hang up
Be quiet when click it, and restore when clicked again
(available on calling)
Click to cancel the calling
8．
Minimize
Volume+
Volume-
Numeric display area
Re-dial
Click to minimize the interface
Increase volume (available on calling)
Decrease volume (available on calling)
Display the calling number
Click it the number will be re-dialed
Close Click it the calling will be closed
9． If connected, it’ll display “Connected”
Minimize Click to minimize the interface
Volume+
Volume-
Numeric display area
Mute
Increase volume (available on calling)
Decrease volume (available on calling)
Display the calling number
Click to mute, and click again to restore (available on calling)
Switch the call mode
Click it to switch the call mode (phone or GPS)
Ignore
Small keyboard
10．Incoming call - Display
Click it to hang up the call
Click it will display a small keyboard
【 Note】 this small keyboard can be used to dial the extension numbers, click it again it will be disappear
Minimize Click to minimize the interface
Volume+
Volume-
Numeric display area
Mute
Increase volume (available on calling)
Decrease volume (available on calling)
Display the coming phone number
Click to mute and click again to restore (available on calling)
Answer Click it to answer
Ignore Click it to hang up
11．It’ll display “Connected” when you Click the “Answer” key, this navigation device can be used as a phone can talk through microphone and display the time,.
a) ；Click
Minimize Click to minimize the interface
Volume+ Increase volume (available on calling)
Volume-
Numeric display area
Small keyboard
Decrease volume (available on calling)
Display the connecting number and time
Click it will display a small keyboard
【Note】 this small keyboard can be used to dial the extension numbers, click it again it will be disappear
Quiet Click to mute and click again to restore.
Switch the call to the mobile
Click it to switch the call to mobile, after the call ended, or click the each “Speakerphone” “Bluetooth” of the mobile, the
Bluetooth will be restore connected automatic
【Note】Different mobile has different response.
For example, after press down this key of Nokia, it will switch the call to device, and cut down the Bluetooth for the moment. The interface will close at that time. Finish the call and operate .On the device will renew connection automatically. Interface will open and timing again. However, after Press down this key of Motorola,
Bluetooth connection will not be cut down when it switches the call to device. Call interface will keep on. Call will switch back after user press this key again.
Hang up Click it to ending the call
of the Bluetooth “Function”
Close
Dialed records
Received calls records
Click to close the current folder
Click it to display dialed records
Click it to display received calls
Missed calls records Click it to display missed calls
Numeric display area Display number records
Last Page View dial records on the last page
Next Page View dial records on the next page
Delete one piece of records
Click it to delete one piece of records
Delete All Click it to delete all the records
Dial the selected number of the records
Click it to dial the selected number of the records
【Notice】All the records contain Dialed, Received ,and Missed ,at most 20 records of each item from the GPS, including numbers, time of calling, and lasting time , etc..
13． ；Click on the Bluetooth interface and enter the pair devices records
Close
Bluetooth devices
Area
Last Page
图 4.7.13
Click to close the current folder
Display the name of matched Bluetooth device
Choose the previous device
Next Page
Connect
Disconnection
Choose the next device
Click it to send the connecting request to the selected
Bluetooth device.
Click it to disconnect the current connecting device.
Delete ALL Click it delete all the paired device records
【Notice】If the GPS needs to connect with another Bluetooth devices while it connecting with a mobile already, it should cut the current connection first, then search the Bluetooth device and click the to connect.
If failed, please turn back to the main interface , and click the “pair” key to research and connect the device.
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
Navigation functions
Audio player
Picture skimming
E-book reader
Video player
Bluetooth functionality
Touch screen interface
4.3 inch display
Built-in Lithium battery
SD card support
Frequently asked questions
You can charge the GPS navigator using the included adapter or car light adapter. Connect the DC of the adapter to the electric port on the right side of the machine and the other end to an electric socket. The charging indication light will be red while charging and turn blue when fully charged.
A fully charged battery can be used for up to 10 hours under normal conditions. This may vary depending on the type of use. Some functions, such as audio playing, video playing, and bright backlight, will consume a large quantity of battery power, which can reduce the usage.
You can connect the GPS navigator to your computer through the MINI USB port on its left side. This allows you to copy files between the navigator and computer or copy data from the GPS navigator to the computer to recover data if needed.
The audio player supports WMA9, MP3, and WAV music formats. You can set the playing sequence at random, repeat songs, and adjust the volume.
The specific navigation functions depend on your choice of navigating software, which is not included in this manual. Please refer to the Navigation Software Instruction for more details.
