ATV VLBTIR Instruction manual

VLBTIR

Waterproof Infrared

Illumination Camera

Instruction Manual

VER.:1.0, NO.: R040057A

Thank you very much for purchasing our product. Before operating this product, please read this instruction manual carefully to ensure proper use.

1. Safety Precautious

CAUTION

RISK OF ELECTRIC

SHOCK. DO NOT OPEN!

CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS.

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems).

 When in use, please avoid camera window directly contacting the eyes and do not touch the camera body, for it can be heated up to 70℃.

 When installing the camera, please avoid pointing it directly to paper or flammable materials.

 Although the camera is provided with tempered glass, please avoid all direct contact to eliminate contamination, and use cotton balls dipped in cleaning alcohol to clean the window.

2. Description

This inbuilt Infrared Illuminator camera uses a high sensitive 1/3”

(1/4”) interline transfer Charge Coupled Device (CCD) image sensor, and all state circuitry, which provides extremely long life and high reliability. This camera offers excellent image quality and functions with low lag and high burn resistance, and is not subject to distortions from magnetic fields.

Highly resistant to shock and vibration and easy to install, this camera is an excellent choice for your CCTV system.

1

3. Feature

 Built-in high quality CCD camera and high performance infrared illuminator module.

 Total pixels of sensor: NTSC=380K / PAL=440K pixels.

 High sensitivity, low smear, excellent anti-blooming, and high S/N ratio.

 Supports functions: Auto Electronic Shutter (AES), Auto Gain

Control (AGC), Auto White Balance (AWB), Back Light

Compensation (BLC), and Flickless mode (FL).

 Special functions: Mirror (Option), Positive/Negative (Option).

 Built-in board Lens and furnished with mounting bracket.

 DC type power request, low power consumption.

 Dual Window Structure to Prevent Reflection and Diffusion of

Infrared Light.

 3-Axis Concealed Cable Bracket.

 Waterproofing criterion: IP68.

4. Content

Item Name

2 of Part

Appurtenances Bag

A Fix Retaining Screw for Bracket

B Anchor

Quantity

1

1

3

3

1

2

5. Installation & Operation

1. Inst all Preparation

Drill holes on wall if wires need to go through the wall.

2. Inst all Camera

Use the 3 screws provided to attach the camera and bracket to the ceiling, surface or wall.

2

3. Adjust 3-Axis Bracket

Adjust the bracket while checking the view angle from the monitor.

Loosen the bracket lock knob by turning counterclockwise, after adjusting the 3-Axis bracket (X-Y-Z Axis) to get the desired viewing angle, tighten the lock knob by turning it clockwise.

4. Inst all Sunsheid

To install the sunshield, please follow the instruction shown below:

3

6. SPECIFICATIONS

According to the camera purchased, select and refer to the appropriate specification below:

Color Camera

Image Device

1/3” Color CCD

(Sony Chipset)

1/3” Hi-Res.

Color CCD

(Sony Chipset)

1/3” Hi- Res.

CCD

1/3” Ultra Hi- Res.

Color CCD

(Sony Chipset)

1/4” Color CCD

(Sony Chipset)

Picture Elements

NTSC: 510x492

PAL: 500x582

NTSC: 768x494

PAL: 752x582

NTSC: 510x492

PAL: 500x582

Resolution

Min Illumination

S/N Ratio

Electronic Shutter

Gain Control

White Balance

Scanning System

Gamma

Lens Furnished

Sync System

Video Output

Power Supply

Power

IR OFF

Consumption 24 IR

LED ON

Infrared Luminary

Wavelength

Illuminant Distance

Power Supply

Power Consumption

380 TVL 420 TVL

0.02Lux/ F2.0 (Day)

0Lux (IR On)

120mA max.

340mA max.

75mA max.

295mA max.

470 TVL 540 TVL

0.03Lux/ F2.0 (Day)

0Lux (IR On)

More than 48dB

550 TVL 380 TVL

0.04Lux/ F2.0 (Day)

0Lux (IR On)

0.03Lux/ F2.0 (Day)

0Lux (IR On)

NTSC: 1/60S~1/100,000S

PAL: 1/50S~1/100,000S

Auto

120mA max.

340mA max.

Auto

Interlace 2:1

0.45

Board Lens

Internal

1Vp-p/ 75 Ohms

DC 12V±10％

75mA max.

295mA max.

Infrared Illuminator Module

24 IR LED

850nm

20 M

DC 12V±10％

180mA max.

400mA max.

75mA max.

295mA max.

System Device

3 W

-10℃ to 50℃ (14℉ to 122℉)

Operating Temp.

Construction

Waterproofing Criterion

Dimensions

Aluminum Case

IP 68

φ53x58 (L) mm (Body only)

4

Image Device

B/W Camera

1/3” B/W CCD

(Sony Chipset)

1/3” Hi-Res. B/W CCD

(Sony Chipset)

1/3” B/W CCD

Picture Elements

EIA: 510X492

CCIR: 500x582

EIA: 768x494

CCIR: 752x582

EIA: 510X492

CCIR: 500x582

Resolution

420 TVL 600 TVL 400 TVL

Min Illumination 0.01Lux/ F2.0 (Day)

0Lux (IR On)

0.02Lux/ F2.0 (Day)

0Lux (IR On)

0.03Lux/ F2.0 (Day)

0Lux (IR On)

S/N Ratio

Electronic Shutter

Gain Control

Scanning System

Gamma

Lens Furnished

Sync System

Video Output

Power Supply

Power

IR OFF

Consumption 24 IR

LED ON

EIA: 1/60S~1/100,000S, CCIR: 1/50S~1/110,000S

120mA max.

More than 48Db

Auto

Interlace 2:1

0.45

Board Lens

Internal

1Vp-p/ 75 Ohms

DC 12V±10％

340mA max.

Infrared Illuminator Module

24 IR LED

Infrared Luminary

Wavelength

Illuminant Distance

Power Supply

Power Consumption

850nm

20 M

DC 12V±10％

System Device

3 W

-10℃ to 50℃ (14℉ to 122℉)

Operating Temp.

Construction

Waterproofing Criterion

Aluminum Case

IP 68

Dimensions φ53x58 (L) mm (Body only)

(Note: Design and specifications are subject to change without prior notice.)

100mA max.

360mA max.

5