ZEBRA ET80 2-In-1 Windows Detachable Rugged Tablet User Guide

DRAFT FOR REVIEW ONLY

ET80/ET85 Regulatory Guide

Regulatory Information

This device is approved under Zebra Technologies Corporation.

This guide applies to the following model numbers:

• ET80A

• ET85B

• ET85C

All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.

Local language translation / Tradução do idioma local / Übersetzung in die lokale Sprache / Raduccion de idioma local / Traduction en langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale / 現地語

の翻訳 / 현지 언어 번역 / Перевод на местный язык / 本地語言翻譯 / 本地语言翻译 / Yerel dil çeviri

/Tłumaczenie na język lokalny : www.zebra.com/support

Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment.

Operating temperature for handheld use and non-hazardous locations: -20° to 60° C (-4° to 140° F)

Operating temperature for handheld use and hazardous locations: 5° to 40° C (41° to 104° F)

Operating temperature with AC power adapter: -20° to 40° C (-4° to 104° F)

Storage temperature: -30° to 70° C (-22° to 158° F)

NEEDS TRANSLATION

CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source.

Bluetooth ® Wireless Technology

This is an approved Bluetooth ® www.bluetooth.com.

product. For more information on the Bluetooth SIG listing, please visit

Regulatory Markings

Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: www.zebra.com/doc.

The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the device by following these instructions:

1.

2.

During device boot-up, press F12 on the keyboard or touch BBS on the screen.

The boot device list displays.

From boot device list, select E-label .

The E-label displays.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2020 Zebra Technologies Corp. and/or its affiliates. All rights reserved. | www.zebra.com

MN-004132-01EN Rev. A

DRAFT FOR REVIEW ONLY

ET80/ET85 Regulatory Guide

NEEDS TRANSLATION

Health and Safety Recommendations

Ergonomic Recommendations

In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.

Vehicle Installation

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles

(including safety systems). Check with the manufacturer or its representative regarding your vehicle.

Ensure the equipment is installed to avoid driver distractions. You should also consult the manufacturer about any equipment that has been added to your vehicle.

Position the device within easy reach. User should be able to access the device without removing their eyes from the road.

IMPORTANT: Before installing or using, check national and local laws regarding distracted driving.

Safety on the Road

Give your full attention to driving. Obey the laws and regulations on the use of wireless devices in the areas where you drive.

The wireless industry reminds you to use your device / phone safely when driving.

Restricted Use Locations

Remember to observe restrictions and obey all signs and instructions on the use of electronic devices in restricted use locations.

Safety in Hospitals and Aircraft

NOTE: Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments.

Medical Devices

It is recommended that a minimum separation distance of 20 cm (8 inches) be maintained between a wireless device and a medical devices such as pacemakers, defibrillator, or other implantable devices to avoid potential interference with the medical device. Pacemaker users should keep the device at the opposite side of the pacemaker or turn OFF the device if suspected of interference.

Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless product may interfere with the medical device.

2

DRAFT FOR REVIEW ONLY

ET80/ET85 Regulatory Guide

RF Exposure Guidelines

Safety Information

Reducing RF Exposure – Use Properly

Only operate the device in accordance with the instructions supplied.

The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc.

Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide.

The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided.

For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at www.zebra.com/responsibility.

To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 0 cm or more from a user's body and nearby persons.

LED Devices

Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN 62471:2008.

Pulse Duration: 10 ms or CW (ET80A, ET85B, ET85C with SE4107)

Power Supply

Class I power supply cord earthing warning.

The power cord must have safety ground pin or contact that is suitable for electrical outlet.

NEEDS TRANSLATION

WARNING ELECTRICAL SHOCK : Use only a Zebra approved, Certified ITE [LPS] power supply with appropriate electrical ratings. Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous.

Batteries and Power Packs

This information applies to Zebra-approved batteries and power packs containing batteries.

The battery cover must be installed before powering up the device.

NEEDS TRANSLATION

Battery Information

CAUTION : Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions.

Use only Zebra approved batteries.  Accessories which have battery charging capability are approved for use with the following battery models:

• Model BT-000433 (8.80 VDC, 5180 mAh)

3

DRAFT FOR REVIEW ONLY

ET80/ET85 Regulatory Guide

Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry.

However, there are limitations as to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh environmental conditions, and severe drops.

When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half charge.

Replace the battery when a significant loss of run time is detected.

• Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the host device. For more information on Zebra batteries, please visit: www.zebra.com/batterydocumentation and select the Battery Best Practices link.

Battery Safety Guidelines

IMPORTANT – SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS

WARNING – When using this product basic safety precautions should always be followed, including the following:

The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment.

• Read all the instructions before using the product.

• Follow battery usage, storage, and charging guidelines found in the user's guide.

• Improper battery use may result in a fire, explosion, or other hazard.

To charge the mobile device battery, the battery and charger temperatures must be between

TBC°C and TBC°C (TBC°F and TBC°F).

Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support.

Do not disassemble or open, crush, bend or deform, puncture, or shred. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.

Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.

Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.

Do not modify, disassemble, or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water, rain, snow or other liquids, or expose to fire, explosion, or other hazard.

Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.

To reduce the risk of injury, close supervision is necessary when used near children.

Please follow local regulations to promptly dispose of used re-chargeable batteries.

Do not dispose of batteries in fire. Exposure to temperatures over 100°C (212°F) may cause explosion.

Seek medical advice immediately if a battery has been swallowed.

In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.

4

DRAFT FOR REVIEW ONLY

ET80/ET85 Regulatory Guide

If you suspect damage to your equipment or battery, contact Zebra support to arrange for inspection.

Marking and European Economic Area (EEA)

Statement of Compliance

Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and

2011/65/EU.

Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of

Conformity. The full text of the EU Declaration of Conformity is available at: www.zebra.com/doc.

EU Importer : Zebra Technologies B.V

Address: Mercurius 12, 8448 GX Heerenveen, Netherlands

Waste Electrical and Electronic Equipment (WEEE)

For EU Customers: For products at the end of their life, please refer to recycling/disposal advice at: www.zebra.com/weee.

5

DRAFT FOR REVIEW ONLY

United States and Canada Regulatory

Radio Frequency Interference Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmfulb interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements – Canada

This device complies with Innovation, Science and Economic Development Canada’s licence-exempt

RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi même si le brouillage est susceptible d'en compromettre le fonctionnement.

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.

Lorsqu'il fonctionne dans la plage de fréquences 5 150- 5350 MHz, cet appareil doit être utilisé exclusivement en extérieur.

RF Exposure Requirements - FCC and ISED

The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid.

To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 0 cm or more from a user's body and nearby persons.

Pour satisfaire aux exigences d'exposition aux radio fréquences, cet appareil doit fonctionner avec une distance de séparation minimale de 0 cm ou plus de corps d'une personne.

Hotspot Mode

To satisfy RF exposure requirements in hotspot mode, this device must operate with a minimum separation distance of 1.0 cm or more from a user’s body and nearby pesons.

6

DRAFT FOR REVIEW ONLY

Pour satisfaire aux exigences d’exposition aux RF en mode points d’accès sans fil, cet appareil doit fonctionner à une distance minimale de 1,0 cm du corps de l’utilisateur et des personnes à proximité.

Co-located Statement

To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located (within 20 cm) or operating in conjunction with any other transmitter/antenna except those already approved in this filling.

Hotspot ISED Notice

When operating in hotspot mode, this device is restricted to indoor use when operating in the

5150 5350 MHz frequency range.

En mode de connexion partagée (hotspot), l'utilisation de cet appareil doit se faire exclusivement en extérieur lorsqu'il fonctionne dans la plage de fréquences 5 150 5 350 MHz.

UL Listed Products with GPS

Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global Positioning

System (GPS) hardware, operating software, or other aspects of this product. UL has only tested for fire, shock, or casualties as outlined in UL’s Standard(s) for Safety for Information Technology Equipment. UL

Certification does not cover the performance or reliability of the GPS hardware and GPS operating software. UL makes no representations, warranties, or certifications whatsoever regarding the performance or reliability of any GPS related functions of this product.

Marquage UL des produits équipés d'un GPS

Les tests menés par Underwriters Laboratories Inc. (UL) ne portent ni sur les performances, ni sur la fiabilité du matériel et du logiciel d'exploitation du GPS (Global Positioning System), ni sur tout autre aspect de ce produit. UL a uniquement testé la résistance au feu, aux chocs et aux sinistres, comme le définit la norme UL60950-1 relative à la sécurité des matériels de traitement de l'information. La certification UL ne couvre ni les performances, ni la fiabilité du matériel et du logiciel d'exploitation GPS.

UL ne formule aucune déclaration, ni ne délivre aucune garantie ni aucun certificat concernant les performances et la fiabilité des fonctions GPS de ce produit.

Hazardous Locations

Class 1 Div 2 Product Regulatory Information

The following regulatory statements apply only to the Class 1 Div 2 products. The Class 1 Div 2 products are marked UL Listed 3JDT.

Installation and Operating Instructions

An installation manual shall be provided with each unit to direct the user on proper installation and operation of the device.

The warning and caution marking should be provided in English and French for Canadian Certification.

1.

SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D HAZARDOUS LOCATIONS,

OR NONHAZARDOUS LOCATIONS ONLY.

2.

3.

WARNING - EXPLOSION HAZARD - External Connections (Audio port, USB ports, USB type-C port,

HDMI port, Docking Connectors, Antenna pass-through ports and optional RS-232 port) are not to be used in a Hazardous Location.

WARNING - EXPLOSION HAZARD - Tablet PC is to be only powered from the battery pack while in

Hazardous Locations. Power adapter is not certified to use in Hazardous Locations and not to be used in Hazardous Locations.

7

中国

DRAFT FOR REVIEW ONLY

4.

5.

WARNING - EXPLOSION HAZARD – BATTERY MUST ONLY BE CHANGED/CHARGED IN AN

AREA KNOWN TO BE NON-HAZARDOUS.

WARNING – EXPLOSION HAZARD. Micro SD card slot, SIM card slot, Battery Pack, DO NOT

REMOVE OR REPLACE WHILE CIRCUIT IS LIVE UNLESS THE AREA IS FREE OF IGNITIBLE

CONCENTRATIONS.

NEED TRANSLATIONS

Informations réglementaires sur les produits de classe 1, division 2

Les déclarations réglementaires suivantes ne s'appliquent qu'aux produits de classe 1, division 2. Les produits Class 1 Div 2 sont marqués UL Listed 3JDT

INCLUDE FRENCH CANADIAN TRANSLATION OF INSTALLATION AND OPERATING INSTRUCTIONS

HERE

通过访问以下网址可下载当地语言支持的产品说明书 www.zebra.com/support

确认进网标贴和证书真伪可查询网址 : www.tenaa.com.cn/.

锂电池安全警示语 :

警告：请勿拆装，短路，撞击，挤压或者投入火中

注意：如果电池被不正确型号替换，或出现鼓胀，会存在爆炸及其他危险

请按说明处置使用过的电池

电池浸水后严禁使用

如果配套使用外部电源适配器，请确保其已通过 CCC 认证

（一） 符合 “ 微功率短距离无线电发射设备目录和技术要求 ” 的具体条款和使用场景，采用的天线类型和性

能，控制、调整及开关等使用方法；

（二）不得擅自改变使用场景或使用条件、扩大发射频率范围、加大发射功率 （包括额 外加装射频功率

放大器），不得擅自更改发射天线；

（三）不得对其他合法的无线电台 （站）产生有害干扰，也不得提出免受有害干扰保护；

（四）应当承受辐射射频能量的工业、科学及医疗 （ISM）应用设备的干扰或其他合法的无线电台 （站）

干扰；

（五）如对其他合法的无线电台 （站）产生有害干扰时，应立即停止使用，并采取措施消除干扰后方可继

续使用；

（六）在航空器内和依据法律法规、国家有关规定、标准划设的射电天文台、气象雷达站、卫星地球站

（含测控、测距、接收、导航站）等军民用无线电台 （站）、机场等的电磁环境保护区域内使用微功率设

备，应当遵守电磁环境保护及相关行业主管部门的规定；

（七）禁止在以机场跑道中心点为圆心、半径 5000 米的区域内使用各类模型遥控器；

（八）有关支持的工作环境条件，请参阅本指南的最高工作温度以及电池信息和电源信息部分。

8

DRAFT FOR REVIEW ONLY

产品中有害物质的名称及含量

部件名称

(Parts)

铅

(Pb)

汞

(Hg)

镉

有害物质

(Cd)

六价铬

(Cr(VI))

苯

(PBB)

苯醚

(PBDE)

金属部件

(Metal Parts)

电路模块

(Circuit

电缆及电缆组件

(Cables

塑料和聚合物部件

光学和光学组件

(Optics

打印头

(Print Heads)

电池

(Batteries)

外部电源

(Ext. Pwr Sply)

本表格依据 SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。

X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。( 企业可在此

处，根据实际情况对上表中打 “×” 的技术原因进行进一步说明。

Colombia

Señor usuario, la siguiente información se entrega de conformidad con lo establecido en el Régimen de protección de los derechos de los usuarios, expedido por la Comisión de Regulación de Comunicaciones.

Recomendaciones de uso:

1.

Utilice siempre que pueda dispositivos manos libres.

2.

3.

4.

5.

6.

Evite utilizar el equipo mientras conduce un vehículo.

En caso que el teléfono sea utilizado por niños, ancianos, mujeres embarazadas y población inmunocomprometida, consulte a su médico y el manual del equipo.

Si usted utiliza algún dispositivo electrónico de uso médico, asegúrese que el mismo esté protegido contra las ondas de radiofrecuencia externas.

Apague su teléfono en lugares tales como: hospitales, centros de salud, aviones, estaciones de suministro de combustible, en presencia de gases explosivos y lugares donde se realizan explosiones.

Evite que terceros hagan uso de su teléfono para prevenir la implantación de dispositivos como programas espías (spyware) o identificadores ocultos, que atentan contra la seguridad de la información contenida en el mismo.

9

DRAFT FOR REVIEW ONLY

Евразийский Таможенный Союз (EAC)

Данный продукт соответствует требованиям знака EAC.

France

México

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

臺灣

Cet appareil a été testé et déclaré conforme aux limites applicables d'exposition aux radiofréquences (RF).

Le débit d'absorption spécifique (DAS) local quantifie l'exposition de l'utilisateur aux ondes

électromagnétiques de l'équipement concerné.

Les valeurs DAS les plus élevées sont disponibles sur la déclaration de conformité (DoC) disponible sur: www.zebra.com/doc.

Translation: According to the Administrative Regulations on Low Power Radio Waves Radiated Devices:

Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency device.

The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.

The said legal communications means radio communications is operated in compliance with the Telecommunications Management

Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

低功率電波輻射性電機管理辦法

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更

原設計之特性及功能。

低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至

無干擾時方得繼續使用。

前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及

醫療用電波輻射性電機設備之干擾。

應避免影響附近雷達系統之操作

公司資訊

台灣斑馬科技股份有限公司 / 台北市信義區松高路 9 號 13 樓

行政院環保署 (EPA) 要求乾電池製造或進口商，需依廢棄物清理法第 15 條之規定，於販

售、贈

送或促銷的電池上標示回收標誌。請聯絡合格的台灣回收廠商，以正確棄置電池。

10

DRAFT FOR REVIEW ONLY

限用物質含有情況標示聲明書

設備名稱

單元

Unit

(Product Description in CHINESE

Equipment name)

鉛

(Pb)

汞

(Hg)

型號 （型式）

Model Type designation (Type)

限用物質及其化學符號

Restricted substances and its chemical symbols

鎘

(Cd)

六價鉻

(Cr+6)

多溴聯苯

(PBB)

多溴二苯醚

(PBDE)

印刷電路板及電子組件

金屬零件

電纜及電纜組件

塑料和聚合物零件

光學與光學元件 —

打印頭  

備考 1. 〝超出 0.1 wt % 〞及〝超出 0.01 wt % 〞係指限用物質之百分比含量超出百分比含量基準值。

備考 2. 〝 O 〞係指該項限用物質之百分比含量未超出百分比含量基準值。

備考 3. 〝−〞係指該項限用物質為排除項目。

Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: “O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The “ − ” indicates that the restricted substance corresponds to the exemption.

TÜRK WEEE Uyumluluk Beyanı

EEE Yönetmeliğine Uygundur.

ประเทศไทย

เครื่ องโทรคมนาคมและอุ ปกรณ์ นี้ มี ความสอดคล้ องตามข้ อกำหนดของ กทช .

เครื่ องวิ ทยุ คมนาคมนี้ มี อั ตราการดู ดกลื นพลั งงานจํ าเพาะ (Specific Absorption Rate – SAR)

อั นเนื่ องมาจากเครื่ องวิ ทยุ คมนาคมเท่ ากั บ

SAR VALUES TBC (STILL TBD)

• ET80A 0.43 w/kg

• ET85B x.xx w/kg

• ET85C x.xx w/kg

ซึ่งสอดคล้องตามมาตรฐานความปลอดภัยต่อสุขภาพของมนุษย์จากการใช้เครื่องวิทยุคมนาคมที่คณะกรรมการกิจการโ

ทรคมนาคมแห่ งชาติ ประกาศกํ าหนด

United Kingdom

Statement of Compliance

Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations

2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic

Equipment Regulations 2012.

11

DRAFT FOR REVIEW ONLY

Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity.

The full text of the UK Declaration of Conformity is available at: www.zebra.com/doc.

UK Importer: Zebra Technologies Europe Limited

Address:

Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF

12

DRAFT FOR REVIEW ONLY

ET80/ET85 Regulatory Guide

Warranty

For the complete Zebra hardware product warranty statement, go to: zebra.com\warranty .

Service Information

Before you use the unit, it must be configured to operate in your facility's network and run your applications.

If you have a problem running your unit or using your equipment, contact your facility's Technical or

System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com\support.

For the latest version of the guide go to: zebra.com\support .

Software Support

Zebra wants to ensure that customers have the latest entitled software at the time of device purchase in order to keep the device operating at peak performance levels. To confirm that your Zebra device has the latest entitled software available at the time of purchase, visit www.zebra.com/support .

Check for the latest software from Support > Products, or search for the device and select Support >

Software Downloads.

If your device does not have the latest entitled software as of your device purchase date, e-mail Zebra at [email protected] and ensure you include the following essential device information:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are requesting.

If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software.

Additional Information

For information on using the ET8X, refer to the ET8X product guide available at: zebra.com/et80-et85.

13