Your Apria Sleep Therapy

Quick Start Guide

React Health Luna

®

G3

Formerly known as 3B Medical, Inc.

Get Started

Reference your Apria Sleep Therapy User Guide or go to Apria.com/Sleep for more details.

let us help!

1

Place the device on a firm flat surface.

See User Guide page 4

4

Press down the water chamber, and then remove it. Open the water chamber cap and fill the water chamber with approximately 360 ml of water.

See User Guide page 5

2 Connect the Power

Cord: Insert the plug of the power adapter into the DC inlet on the back of the device.

Connect the power cord to the power adapter. Plug the other end of the power cord into the power outlet.

Power Adapter

Power Cord

NOTE: If you have a BPAP device see User Guide page 4 to connect the Power Cord Locker.

DC

Inlet

3

Connect the end of the tubing to the air outlet of the device.

If using heated tubing, connect the heated tubing joint to the air outlet of the device, and then insert the power plug into the heated tubing port on the back of the device.

Air

Outlet

Tubing

Air

Outlet

Connect the other end of the tubing to the mask according to the user manual for the mask.

See User Guide page 5

Heated

Tubing Joint

Heated

Tubing

Power Plug

Heated

Tubing

5

6 Insert the SD card into the SD card slot.

See User Guide page 6

SD Card Slot

SD Card

7

Close the cap after the water is filled and return it to the device.

See User Guide page 6

Connect the device to a power outlet, press the

Start/Stop button delivering air.

and the device will start

See User Guide page 6

8

Fit your mask. If your doctor prescribed a specific mask and size, follow the fitting instructions provided by the manufacturer. If you received a mask with multiple cushions, follow these instructions:

There is a mask cushion currently attached to the frame of your mask. This size fits most patients. Once you begin therapy, if your mask is leaking or feels uncomfortable, try removing the existing cushion and replacing it with a different size cushion. If you are between sizes, it is best to use the larger cushion. Use the Fitting

Template (for nasal mask and full face mask) and/or the manufacturer’s instructions included with your mask for help.

See User Guide page 7

11

Attach the tubing to your mask.

(If using prescribed oxygen, consult page 11 in your Apria Sleep Therapy User Guide .)

See User Guide page 11

Nasal Mask Nasal Pillow

Mask

Full Face Mask

9

Put on your mask.

See User Guide pages 8–10

12

Lie down and take four deep breaths.

The machine should start automatically. If you do not hear the machine start, press the Start

Therapy/Standby button. Relax and begin to take slow breaths through your nose.

See User Guide page 13

13

Check for air leaks.

Small leaks are acceptable. If large leaks occur, consult your Apria Sleep Therapy User Guide .

See User Guide pages 13–14

10

Attach the tubing to the PAP machine.

See User Guide page 11

14

Your setup is complete. You are now ready to begin your PAP therapy!

See User Guide page 15

15

Make sure to follow the cleaning and maintenance instructions provided and review the recommended supply replacement schedule.

See User Guide pages 20–21

If you have any questions or need help setting up your device and getting started, please call us or visit Apria.com/Sleep.

877.265.2426

Monday - Friday: 8 a.m. - 10 p.m. ET

Saturday: 11 a.m. - 7:30 p.m. ET

SLP-4389 08/22_v2 ©2022 Apria Healthcare Group LLC