GOODWE GM1000 Three-Phase Smart Meter Installation Guide
Goodwe GM1000 smart meter is a versatile tool for monitoring and managing energy consumption in your home. With its ability to measure voltage, current, power factor, and frequency, the GM1000 provides a comprehensive overview of your electricity usage. Whether you're looking to reduce your energy bills or simply gain a better understanding of your home's energy consumption, the GM1000 is an invaluable asset.
Reklaam
Reklaam
Quick Installation Guide
Smart Meter
(GM1000D/GM3000/GM1000)
V1.0 -2022-01-25
Quick Installation Guide V1.0-2022-01-25
01
Product Introduction
Indicators
Reserved Port
Reset Button
CT
1
Quick Installation Guide V1.0-2022-01-25
02
Installation
Packing List
Smart Meter x 1 Screwdriver x 1
[1]: For GM1000D and GM3000 only.
[2]: GM1000D x 8; GM1000 x 4; GM3000 x 6.
Installation and Cable Connection
USB Plug x N
PIN terminal x N[2]
1
1
2
4
3
5
6
2
Quick Installation Guide V1.0-2022-01-25
03
Wiring System
GM1000D
CT1
PV
Grid-Tied
PV Inverter
AC-Coupled
Inverter
Loads
CT2
Household
Meter
Utility Grid
Fuse 0.5A
• Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
• CT direction: House (K)-->Grid (L).
3
GM1000
PV
Inverter
Loads
Quick Installation Guide V1.0-2022-01-25
CT
Household
Meter
Utility Grid
Fuse 0.5A
• Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
• CT direction: House (K)-->Grid (L).
4
Quick Installation Guide V1.0-2022-01-25
GM3000
PV
Inverter
Loads
CT
Household
Meter
Utility Grid
Fuse 0.5A
• Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
• CT direction: House (K)-->Grid (L).
5
Quick Installation Guide V1.0-2022-01-25
04
Commissioning
Power ON
Step 1 Connect the smart meter cables.
Step 2 Power on the inverter and make sure that the inverter is working normally. Then the smart meter is powered on.
Indicator
Type Status
Steady on
Off
Steady on
Blinking
Blinking
Blink 5
Description
Power on
Power off
Purchasing from the utility grid.
Selling to the utility grid.
The communication is normal.
The meter is reseting
Reset Button
Press Time
< 3s
5s
>10s
Description
Reset the smart meter.
Restory factory settings.
Restory factory settings and clear the historical energy data.
6
Quick Installation Guide V1.0-2022-01-25
05
Technical Parameters
Voltage
Model
Application
Nominal Voltage
Voltage Range
Frequency
Current Input
Nominal Current
Current Range
Self-Consumption
Data Detection
Energy Calculation
Precision
Voltage/Current
Active Power
Reactive Power
Communication
Interface
Mechanical
Size (L x W x H mm)
Weight
Protection Class
Installation
Method
Operating Temperature
Operating Humidity
Altitude
GM1000D GM1000 GM3000
Single-phase Single-phase
110V/230V
100V~240V
50Hz/60Hz
Three-phase
3 x 230V/380V
CT in: 120A/40mA
0.48A~120A
<3W
Current/Voltage/Active Power/Reactive Power/Power
Factor/Frequency
Active/Reactive Power Energy
Class I
Class I
Class II
RS485(Bund Rate 9600/Modbus Protocol/
Communication cable max.length 100m)
3 LED (Power, Energy Consumption, Communication),
USB port, Reset button
36 x 85 x 66.5
360g 250g
IP20 (For indoor use)
450g
Mounting rack
-25 ~ +60° C
<95%, No condensation
<2000m
7
Quick Installation Guide V1.0-2022-01-25
06
EU Declaration of Conformity
The module sold in the European market meets the following directives and requirements:
• Electromagnetic compatibility Directive 2014/30/EU (EMC)
• Electrical Apparatus Low Voltage Directive 2014/35/EU (LVD)
• Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863 (RoHS)
• Waste Electrical and Electronic Equipment 2012/19/EU
• Registration, Evaluation, Authorization and Restriction of Chemicals (EC) No 1907/2006
(REACH)
You can download the EU Declaration of Conformity on https://en.goodwe.com
.
8
Official Website
GoodWe Technologies Co., Ltd.
No. 90 Zijin Rd., New District, Suzhou, 215011, China www.goodwe.com
Local Contacts
Laadi alla
Reklaam