Samsung UE-37C6000 User Guide

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

EIRE

U.K

Customer Care Centre

0818 717100

0845 SAMSUNG (7267864)

Web Site www.samsung.com/ie www.samsung.com/uk

LED TV user manual

© 2010 Samsung Electronics Co., Ltd. All rights reserved.

BN68-02748D-01Eng-Cover.indd 1

BN68-02748D-00

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at www.samsung.com/register

Model _____________ Serial No. _____________

2010-04-02 오전 10:09:50

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specifications may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.

Still image warning

Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try do display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

✎ WARNINGS : Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Set-top Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not recommended.

When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to decrease the intensity of the picture.

✎ IMPORTANT : Image retention issues are not covered by your Samsung® warranty.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

Installation with a stand.

Installation with a wall-mount.

10 cm 10 cm

10 cm 10 cm

10 cm 10 cm

10 cm

2

English

[UC6000-XU]BN68-02748D-01Eng.indb 2 2010-04-01 오후 7:23:23

Contents

Getting Started

4

Connections

8

Basic Features

11

4 Accessories

5 Viewing the Control Panel

6 Viewing the Remote Control

7 Connecting to an Antenna

7 Plug & Play (Initial Setup)

8 Connecting to an AV Device

9 Connecting to an Audio Device

10 Changing the Input Source

Advanced Features

24

Other Information

44

11 How to Navigate Menus

11 Using the

INFO

button (Now & Next guide)

11 Planning Your Viewing

13 Channel Menu

15 Picture Menu

18 Sound Menu

20 Setup Menu

23 Support Menu

24 Connecting to a PC

25 Network Connection

32 Media Play

39 Anynet+

42 AllShare

44 Analogue Channel Teletext Feature

45 Assembling the Cables

46 Installing the Wall Mount

48 Anti-theft Kensington Lock

48 Securing the TV to the wall

49 Troubleshooting

53 Specifications

54 Index

Warning! Important Safety Instructions

Wiring the Mains Power Supply Plug (UK Only)

Warranty Card

Check the Symbol!

TOOLS t

This function can be used by pressing the TOOLS button on the remote control.

Note One-Touch Button

English

3


Getting Started

Accessories

✎

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

y Remote Control & Batteries (AAA x 2) y Owner’s Instructions y Quick Setup Guide y Cleaning Cloth y Power Cord

(M4 X L8) y Blanking Bracket y Holder-Ring (4EA) y Holder-Wire stand y Cable Tie y Holder-Wire (3EA) y Power cord Clamp y Component Adapter

See separate guide for installing the stand.

y AV Adapter y SCART Adapter

5EA (M4 X L12) s s s s s

5EA (M4 X L8) y Stand (1EA) y Guide Stand (1EA) y Screws (10EA)

✎

For best cable connection to this product, be sure to use cables with a maximum thickness as below: y Maximum thickness - 0.55 inches (14mm)

4

English


Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

Power Indicator

Remote control sensor

Speakers

Remote control sensor

Power Indicator

SOURCE E

MENU

Y z

P (Power)

Aim the remote control towards this spot on the TV.

Blinks and turns off when the power is on and lights up in standby mode.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER E button on the remote control.

Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

Adjusts the volume. In the OSD, use the Y buttons as you would use the

◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the z buttons as you would use the

▼ and ▲ buttons on the remote control.

Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

[UC6000-XU]BN68-02748D-01Eng.indb 5

English

5

2010-04-01 오후 7:23:26

Getting Started

Viewing the Remote Control

✎

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and

Volume buttons.

Turns the TV on and off.

Displays and selects the available video sources (p. 10).

POWER

SOURCE

ON/OFF

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed.

(Using the remote control with this button set to ON will reduce the battery usage time.)

Have direct access to channels.

Alternately select Teletext ON, Double,

Mix or OFF.

Adjusts the volume.

Opens the OSD.

Displays Media Play (p. 32).

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

These buttons are for the

Channel Manager , Internet@TV ,

Media Play menu, etc.

Use these buttons in Media Play and

Anynet+ (HDMI-CEC) modes

(p. 32, 39).

( � : Controls recording for Samsung recorders that have the Anynet+ feature)

TTX/MIX

MUTE

PRE-CH

MEDIA.P

TOOLS

CH LIST

MENU

GUIDE

INFO

RETURN EXIT

A

AD

B

P.MODE

S.MODE

C D f g

DUAL

P.SIZE

SUBT.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen

(p. 13).

Displays the EPG (Electronic Programme

Guide) (p. 11).

Displays information on the TV screen.

Exits the menu.

P.MODE

: Press to select the picture mode (p. 15).

S.MODE

: Press to select the sound mode (p. 18).

DUAL f g : Sound effect selection

(p. 20).

AD : Turns the audio description on and off (p. 19). This is not available in some locations.

P.SIZE

: Selects the picture size (p . 17).

SUBT.

: Displays digital subtitles (p. 21).

Installing batteries (Battery size: AAA)

✎

NOTE x Use the remote control within 23 feet from the TV.

x Bright light may affect the performance of the remote control.

Avoid using nearby special fluorescent light or neon signs.

x The colour and shape may vary depending on the model.

6

English


Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

VHF/UHF Antenna

Cable

ANT OUT or

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the

POWER P button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1

Selecting a language Press the ▲ or ▼ button, then press the ENTER E button.

Select the desired OSD (On Screen Display) language.

2

Selecting Store Demo or Home Use

Press the ◄ or ► button, then press the ENTER E button.

y Select the Home Use mode. Store Demo Mode is for retail environments.

POWER P y To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

3 Selecting a country Press the ▲ or ▼ button, then press the

Select the appropriate country.

ENTER E button.

4 Selecting an antenna Press the ▲ or ▼ button, then press the

Select Air or Cable .

ENTER E button.

5

Selecting a channel Press the ▲ or ▼ button, then press the ENTER E button.

Select the channel source to memorise. When setting the antenna source to Cable , a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Store (p. 13).

6 Setting the

Clock Mode

7

Viewing the

HD Connection Guide .

✎

Press the ENTER E button at any time to interrupt the memorisation process.

Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button to select Auto , then press the ENTER E button.

The connection method for the best HD screen quality is displayed.

8 Enjoy your TV. Press the ENTER E button.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

English

7

2010-04-01 오후 7:23:28 [UC6000-XU]BN68-02748D-01Eng.indb 7

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver

(STB)

HDMI OUT

DVD /

Blu-ray player

DVI OUT

DVD /

Blu-ray player

R W

Red White

AUDIO OUT

R-AUDIO-L

✎

HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN x When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI

(DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

x If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour).

x If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.

x It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur.

Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

VCR / DVD

DVD /

Blu-Ray player

COMPONENT OUT

P

R

Y

AUDIO OUT

R-AUDIO-L

R B

G R W

EXT

VCR

AUDIO OUT

R-AUDIO-L

VIDEO OUT

R W

Y

R

Red

W

White

R

Red

B G

Blue Green

R W

Y

Red White Yellow

✎

In Ext . mode, DTV Out supports MPEG SD Video and Audio only.

✎

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

8

English


Connecting to an Audio Device

Using an Optical (Digital) or Headphone Cable Connection

Available devices: digital audio system, amplifier, DVD home theatre

OPTICAL digital audio system

✎

DIGITAL AUDIO OUT (OPTICAL)

DVD x When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. x 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

✎

Headphones H : You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.

x Sound function may be restricted when connecting headphones to the TV.

x Headphone volume and TV volume are adjusted separately.

[UC6000-XU]BN68-02748D-01Eng.indb 9

English

9

2010-04-01 오후 7:23:29

Connections

CONNECTIONS COMMON INTERFACE Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”.

The pairing information containing a telephone number, the “CI or CI+

CARD” ID the Host ID and other information will be displayed in about

2~3 minutes. If an error message is displayed, please contact your service provider.

When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

✎

NOTE x You must obtain a “CI or CI+ CARD” from a local cable service provider. x When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

x Insert the “CI or CI+ CARD” in the direction marked on the card.

x The location of the COMMON INTERFACE slot may be different depending on the model.

x x x

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

If you have any problems, please contact a service provider.

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

Changing the Input Source

Source List

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

■ TV / Ext. / PC / AV / Component

/ HDMI1/DVI / HDMI2 / HDMI3 /

HDMI4 / USB

✎

In the Source List , connected inputs will be highlighted.

✎

Ext.

and PC always stay activated.

SOURCE

Edit Name

■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC /

DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA :

Name the device connected to the input jacks to make your input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @

60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name .

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI) port, you should set to DVI PC or

DVI Devices mode under Edit Name .

10

English


POWER

SOURCE

ON/OFF

Basic Features

PRE-CH

MUTE

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

CH LIST

MENU

MEDIA.P

GUIDE 3

TOOLS INFO

1

RETURN EXIT

2 4

1 ENTER E / Direction button: Move the cursor and

2 select an item. Confirm the setting.

RETURN

MEDIA.P

@TV

INTERNET f g

button: Returns to the previous menu.

3 MENU

AD P.SIZE

SUBT.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU m The main menu options appear on the screen:

Picture , Sound , Channel , Setup ,

2

3

▲ / ▼

ENTER E

Input , Application , Support .

Select an icon with the button.

Press ENTER sub-menu.

E

▲ or ▼

to access the

4 ▲ / ▼ Select the desired submenu with

5 ◄ / ► the ▲ or ▼ button.

Adjust the value of an item with the

◄ or ► button. The adjustment in the OSD may differ depending on

6

ENTER E the selected menu.

Press ENTER configuration.

7 EXIT e Press EXIT .

E to complete the

Using the INFO button (Now & Next guide)

The display identifies the current channel and the status of certain audio-video settings.

INFO

The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time.

y Scroll ◄ , ► to view information for a desired programme while watching the current channel. y Scroll ▲ , ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTER E button.

DEF

DTV Air

15

Life On Venus Avenue

Unclassified

No Detaild Information

18:00 ~ 6:00

18:11 Thu 6 Jan

E Watch

Information

Planning Your Viewing

Guide

The EPG (Electronic Programme Guide) information is provided by broadcasters.

Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to

GUIDE the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.

Using Channel View

Guide

2:10 Tue 1 Jun

800 five

Channel View - TV

Today

27

28

800

24

16

6

Discovery

DiscoveryH&L five price-drop.tv

QVC

R4DTT

DTV Air 800 five

Home and Away

18:00 - 18:30

Drama

Dani is devastated when scott makes clear his views on marriage...

18:00 - 19:00

American Chopper

Programmes resume at 06:00

) Family Affairs Home and...

No Information

QVC Selection

No Information

19:00 - 20:00

Tine Team

Fiv...

) Dark Angel

View Mode +24 Hours Ch. Mode Information k Page E Watch

1 2 3 4 5 6

English

11

2010-04-01 오후 7:23:32 [UC6000-XU]BN68-02748D-01Eng.indb 11

Basic Features

Using Scheduled View

Guide

2:10 Tue 1 Jun

DTV Air 800 five

Family Affairs

18:00 - 18:30

Drama

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

800 five

Scheduled View

18:30

19:15

Today

Today

) Family Affairs

) Dark Angel

800

800 five five

View Mode Information E Cancel

1 4 6

1 Red ( View Mode ): View the list of programmes that are playing now or coming up.

2 Yellow ( +24 Hours ): Viewing the list of programmes to be broadcasted after 24 hours.

3 Blue ( Ch. Mode ): Select the type of channels you want to display on the Channel View window. ( All , TV ,

Radio , Data/Other , My Channel 1~4 )

4 Information : Displays details of the selected programme.

5 k (Page) : Move to next or previous page.

6 ENTER E button

– When selecting the current programme, you can watch the selected programme.

– When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTER E button again and select Cancel Schedules .

Channel Manager

Delete or set favourite channels and use the programme guide for digital broadcasts. Select a channel in the

Channels , My Channels or Scheduled screen.

All c 1

2

1futech

* 24ore.tv

TV

Radio

Data/Other

Analogue

15 abc1

3 BBC World

23 bid-up.tv

33 Boonerang

32 Cartoon Nwk

5

4

27

Class News

\ Coming Soon

Discovery r

Air Antenna B Zoom Select Sort k Page T Tools

■

■

Channels : Shows the channel list according to channel type.

* My Channels : Shows the group of the channel.

■ Scheduled : Shows all the currently reserved programmes.

✎

Using the colour buttons with the Channel Manager x Red ( Antenna ): Toggle among Air or Cable .

x

B

Green ( Zoom ): Enlarges or shrinks a channel number.

x Yellow ( Select ): Select desired channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels. x Blue ( Sort ): Change the list ordered by channel name or channel number.

x k ( Page ): Move to next or previous page.

x T ( Tools ): Displays the Channel Manager option menu. (The options menus may differ depending on the situation.)

Channel Status Display Icons

Icons

A c

*

(

\

)

Operations

An analogue channel.

A channel selected.

A channel set as a Favourite.

A programme currently being broadcast.

A locked channel.

A reserved programme.

12

English


¦

Using Favourite Channels Channel Menu

*

My Channels

(in Channel Manager )

Shows all favourite channels.

■ Edit My Channels t : You can set the selected channels to desired my channels group.

✎

The “ * ” symbol will be displayed and the channel will be set as a my channel.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel in the my channel groups you want among 1, 2, 3 and 4.

x One or more groups can be selected.

3. After you have changed the settings, the channel list for each group can be viewed in my channels.

All c 1

2

1futech

* 24ore.tv

TV

Radio

Data/Other

Analogue

15 abc1

3

23

Lock

BBC World

bid-up.tv

33

32

Boonerang

Cartoon Nwk

5

4

27

Class News

\ Coming Soon

Discovery r

Air Antenna

B

Zoom Select Sort k Page T Tools

Channel List

You can see all the channels searched.

Use to select a customized channel, for thecurrently selected input, from the lists All

/ TV / Radio / Analogue.

✎

The current input is indicated in the bottom left corner of the Channel List window. Select a different input by pressing the A button.

CH LIST

¦

Retuning Channels

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Country

The PIN input screen appears. Enter your 4 digit PIN number.

■ Digital Channel : Change the country for digital channels.

■ Analogue Channel : Change the country for analogue channels.

Auto Store

Scans for a channel automatically and stores in the TV.

✎

Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the

PIN input window appears.

■ Antenna Source (Air / Cable) antenna source to memorise.

t : Select the

■ Channel Source (Digital & Analogue / Digital /

Analogue) : Select the channel source to memorise.

When selecting Cable → Digital & Analogue or Digital :

Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick) : Scans for all channels with active broadcast stations and stores them in the TV.

✎

If you select Quick , you can set up the Network ,

Network ID , Frequency , Modulation and

Symbol Rate manually by pressing the button on the remote control.

Network (Auto / Manual) : Selects the Network ID setting mode among Auto or Manual .

Network ID : When Network is Manual , you can set up

Network ID using the numeric buttons.

Frequency : Displays the frequency for the channel.

(differs in each country)

Modulation : Displays available modulation values.

Symbol Rate: Displays available symbol rates.

[UC6000-XU]BN68-02748D-01Eng.indb 13

English

13

2010-04-01 오후 7:23:34

Basic Features

Manual Store

Scans for a channel manually and stores in the TV.

✎

If a channel is locked using the Child Lock function, the PIN input window appears.

■ Digital Channel : When scanning has finished, channels are updated in the channel list.

✎

When selecting Antenna → Air : Channel ,

Frequency , Bandwidth

✎

When selecting Antenna → Cable : Frequency ,

Modulation , Symbol Rate

■ Analogue Channel (Programme, Colour System,

Sound System, Channel, Search) : If there is abnormal sound or no sound, reselect the sound standard required.

✎

Channel mode x P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

x C (aerial channel mode) / S (cable channel mode):

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

¦

Editing Channels

Channel Manager Option Menu



2. Edit the channel name or number using the

Edit Channel Name or Edit Channel Number menu.

■ Edit Channel Name (analogue channels only): Assign your own channel name.

■ Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired.

¦

Other Features

Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and symbol rate for a cable network search.

■ Freq.Start / Freq.Stop

: Set the start or stop frequency

(differs in each country).

■ Modulation : Displays available modulation values.

■ Symbol Rate : Displays available symbol rates.

Channel Manager

Channel Manager Option Menu

Set each channel using the Channel Manager menu options

( Lock / Unlock, Timer Viewing, Sort, Delete, Select All /

Deselect All ). Option menu items may differ depending on the channel status.


2. Select a function and change its settings.

■ Lock / Unlock : Lock a channel so that the channel cannot be selected and viewed.

✎

NOTE x This function is available only when the Child Lock is set to On .

x The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.

■ Timer Viewing : You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.

✎

When a digital channel is selected, press the ► button to view the digital Programme.

■ Sort (analogue channels only): This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store.

■ Delete : You can delete a channel to display the channels you want.

■ Select All / Deselect All : Select all the channels or deselect all the selected channels in the channel manager.

14

English


Scheduled


You can view, modify or delete a show you have reserved to watch.

■ Change Info : Change a show you have reserved to watch.

■ Cancel Schedules : Cancel a show you have reserved to watch.

■ Information : Display a show you have reserved to watch. (You can also change the reservation information.)

■ Select All / Deselect All : Select or deselect all reserved programmes.

¦

Adjusting Picture Settings

Backlight / Contrast / Brightness /

Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality control.

✎

NOTE x In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.

x In PC mode, you can only make changes to

Backlight , Contrast and Brightness .

x Settings can be adjusted and stored for each external device connected to the TV.

¦

Economical Solutions

Channel List Transfer

The PIN input screen appears. Enter your 4 digit PIN number.

Imports or exports the channel map. You should connect a

USB storage to use this function.

■ Import from USB : Import channel list from USB.

■ Export to USB : Export channel list to USB. this function is available when USB is connected.

Fine Tune

(analogue channels only)

If the signal is weak or distorted, fine tune the channel manually.

✎

Fine tuned channels are marked with an asterisk “*”.

✎

To reset the fine-tuning, select Reset .

Picture Menu

¦

Changing the Preset Picture Mode

Mode

Select your preferred picture type.

■ Dynamic : Suitable for a bright room.

■ Standard : Suitable for a normal environment.

P.MODE

■ Natural : Suitable for reducing eye strain.

✎

Natural is not available in PC mode.

■ Movie : Suitable for watching movies in a dark room.

Eco Solution

■ Energy Saving (Off / Low / Medium / High /

Picture Off / Auto) t : This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off , the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.

■ Eco Sensor (Off / On) : To enhance your power savings; the picture settings will automatically adapt to the light in the room.

✎

If you adjust the Backlight , the Eco Sensor will be set to Off .

Min Backlight : When Eco sensor is On , the minimum screen brightness can be adjusted manually.

✎

If Eco Sensor is On , the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.

■ No-Signal Power Off (Off / 15 min / 30 min / 60 min) :

To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.

✎

Disabled when the PC is in power saving mode.

[UC6000-XU]BN68-02748D-01Eng.indb 15

English

15

2010-04-01 오후 7:23:34

Basic Features

¦

Changing the Picture Options

Advanced Settings

(available in Standard / Movie mode)

You can adjust the detailed setting for the screen including colour and contrast.

✎

In PC mode, you can only make changes to

Dynamic Contrast, Gamma, White Balance and

LED Motion Plus .

Advanced Settings

Black Tone

Dynamic Contrast

Shadow Detail

Gamma

Expert Pattern

RGB Only Mode

Colour Space

: Off

: Medium

: -2

: 0

: Off

: Off

: Native

►

▼

U Move E Enter R Return

■ Black Tone (Off / Dark / Darker / Darkest) : Select the black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High) : Adjust the screen contrast.

■ Shadow Detail (-2~+2) : Increase the brightness of dark images.

■ Gamma : Adjust the primary colour intensity.

■ Expert Pattern (Off / Pattern1 / Pattern2) : By running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.

✎

While the Expert Pattern is running, sound is not outputted.

✎

Only enabled in DTV, Component and HDMI modes.

✎

Disabled for channels that support MHEG if

Digital Text is Enable .

■ RGB Only Mode (Off / Red / Green / Blue) : You can adjust Colour or Tint (G/R) of Red , Green or Blue for the picture from an external device (DVD player, home theatre, etc.).

■ Colour Space (Auto / Native / Custom) : Adjust the range of colours available to create the image. To adjust

Colour, Red, Green, Blue and Reset , set

Colour Space to Custom .

■ White Balance : Adjust the colour temperature for a more natural picture.

R-Offset / G-Offset / B-Offset : Adjust each colour’s

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain : Adjust each colour’s (red, green, blue) brightness.

Reset : Resets the White Balance to it’s default settings.

■ Flesh Tone : Emphasize pink “Flesh Tone.”

■ 10p White Balance (Off / On) : Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

✎

Available when the picture mode is set to Movie and when the external input is set to all input.

✎

Some external devices may not support this function.

Interval : Select interval to adjust.

Red : Adjust the red level.

Green : Adjust the green level.

Blue : Adjust the blue level.

Reset : Resets the 10p White Balance to its default settings.

■ Edge Enhancement (Off / On) : Emphasize object boundaries.

■ xvYCC (Off / On) : Setting the xvYCC mode on increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.

✎

Available when the picture mode is set to Movie and when the external input is set to HDMI or

Component.

✎

Some external devices may not support this function.

■ LED Motion Plus (Off / On) : Removes drag from fast scenes with a lot of movement to provide a clear picture.

16

English


Picture Options

✎

In PC mode, you can only make changes to the

Colour Tone, Size and Auto Protection Time .

Picture Options

Colour Tone

Size

Screen Mode

Digital Noise Filter

MPEG Noise Filter

HDMI Black Level

Film Mode

: Normal

: Auto Wide

: 16:9

: Auto

: Auto

: Normal

: Off

▼

►


■ Colour Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the picture mode is Dynamic .

✎

Settings can be adjusted and stored for each external device connected to an input on the TV.

■ Size : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

P.SIZE

Auto Wide : Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9 : Adjusts the picture size to 16:9 for

DVDs or wide broadcasting.

Wide Zoom : Magnifies the picture size more than 4:3.

✎

Adjusts the Position by using ▲ , ▼ buttons.

Zoom : Magnifies the 16:9 wide pictures vertically to fit the screen size.

✎

Adjusts the Position or Size by using ▲ , ▼ button.

4:3 : The default setting for a movie or normal broadcasting.

✎

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.

Screen Fit : Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.

✎

NOTE x Depending on the input source, the picture size options may vary.

x The available items may differ depending on the selected mode.

x In PC mode, only 16:9 and 4:3 modes can be adjusted.

x Settings can be adjusted and stored for each external device connected to an input on the TV.

x After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Adjusts the

Position or Size by using ▲ , ▼ , ◄ , ► button. x If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3) :

Available only when picture size is set to Auto Wide . You can determine the desired picture size at the 4:3 WSS

(Wide Screen Service) size or the original size. Each

European country requires different picture size.

✎

Not available in PC, Component or HDMI mode.

■ Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualisation) : When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed.

Auto Visualisation : When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.

✎

Only available for analogue channels.

■ MPEG Noise Filter (Off / Low / Medium / High /

Auto) : Reduces MPEG noise to provide improved picture quality.

■ HDMI Black Level (Normal / Low) : Selects the black level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■ Motion Plus (Off / Clear / Standard / Smooth /

Custom / Demo) : Removes drag from fast scenes with a lot of movement to provide a clearer picture.

✎

If noise occurs on the screen, please set up the

Motion Plus to Off . If Motion Plus is Custom , you can set up the Blur Reduction, Judder

Reduction or Reset manually.

✎

If Motion Plus is Demo , you can compare the difference of on and off modes.

[UC6000-XU]BN68-02748D-01Eng.indb 17

English

17

2010-04-01 오후 7:23:35

Basic Features

Blur Reduction : Adjusts the blur reduction level from video sources.

Judder Reduction : Adjusts the judder reduction level from video sources when playing films.

Reset : Reset the custom settings.

■ Auto Protection Time (2 hours / 4 hours / 8 hours /

10 hours / Off) : If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

¦

Setting up the TV with Your PC

Set the input source to PC.

Auto Adjustment

t

Adjust frequency values/positions and fine tune the settings automatically.

Not available when connecting with an HDMI/DVI cable.

Screen

■ Coarse / Fine : Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible ( Coarse ) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen.

■ Position : Adjust the PC screen position with direction button ( ▲ / ▼ / ◄ / ► ).

■ Image Reset : Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

y The correct size setting (resolution) [Optimum: 1920 X

1080 pixels] y If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”.

Otherwise, just click “OK” and exit the dialog box.

Sound Menu

¦

Changing the Preset Sound Mode

SRS TheaterSound

■ Standard : Selects the normal sound mode.

■ Music : Emphasizes music over voices.

■ Movie : Provides the best sound for movies.

■ Clear Voice : Emphasizes voices over other sounds.

S.MODE

■ Amplify : Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

¦

Adjusting Sound Settings

Equalizer

Adjusts the sound mode (standard sound mode only).

■ Balance L/R : Adjusts the balance between the right and left speaker.

■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth

Adjustment): Adjusts the level of specific bandwidth frequencies.

■ Reset : Resets the equalizer to its default settings.

¦

Sound Systems, Etc.

SRS TruSurround HD (Off / On)

t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head

Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly.

Audio Language

(digital channels only)

Change the default value for audio languages.

✎

The available language may differ depending on the broadcast.

18

English


Audio Format


When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

✎

Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable.

Audio Description

(not available in all locations) (digital channels only)

This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.

■ Audio Description (Off / On) : Turn the audio description function on or off.

■ Volume : Adjust the audio description volume.

AD

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal .

■ Night : This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External Speaker / TV

Speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker .

✎

When Speaker Select is set to External Speaker , the volume and MUTE buttons will not operate and the sound settings will be limited.

✎

When Speaker Select is set to External Speaker

✎ x TV Speaker : Off , External Speaker : On

When Speaker Select is set to TV Speaker

✎ x TV Speaker : On , External Speaker : On

If there is no video signal, both speakers will be mute.

Additional Setting


■ DTV Audio Level (MPEG / HE-AAC) : This function allows you to reduce the disparity of a voice signal

(which is one of the signals received during a digital TV broadcast) to a desired level.

✎

According to the type of broadcast signal, MPEG

/ HE-AAC can be adjusted between -10dB and

0dB.

✎

To increase or decrease the volume, adjust between the range 0 and -10 respectively.

■ SPDIF Output : SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a

DVD player.

Audio Format : During the reception of a digital TV broadcast, you can select the Digital Audio output

(SPDIF) format from the options PCM or Dolby Digital .

Audio Delay : Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver

(0ms ~ 250ms).

■ Dolby Digital Comp (Line / RF) : This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎

Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line : Set the output level for signals greater or less than

-31dB (reference) to either -20dB or -31dB.

RF : Set the output level for signals greater or less than

-20dB (reference) to either -10dB or -20dB.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

[UC6000-XU]BN68-02748D-01Eng.indb 19

English

19

2010-04-01 오후 7:23:36

Basic Features

¦

Selecting the Sound Mode

When you set to Dual f g , the current sound mode is displayed on the screen.

A2

Stereo

NICAM

Stereo

Audio

Type

Mono

Stereo

Dual

Mono

Stereo

Dual

Dual f g

Mono

Stereo ↔ Mono

Dual f ↔ Dual g

Mono

Mono ↔ Stereo

Mono ↔ Dual f

 Dual g 

Default

Automatic change

Dual f

Automatic change

Dual f

✎

If the stereo signal is weak and an automatic switching, occurs, then switch to the mono.

✎

Only activated in stereo sound signal.

✎

Only available when the Input source is set to TV .

Setup Menu

¦

Setting the Time

f g

DUAL

Time

■ Clock : Setting the clock is for using various timer features of the TV.

O

The current time will appear every time you press the INFO button.

✎

If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

✎

Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

✎

The antenna must be connected in order to set the time automatically.

Clock Set : Set the Day , Month , Year , Hour and Minute manually.

✎

Available only when Clock Mode is set to

Manual .

Time Zone (depending on the country): Select your time zone.

✎

When Country is set to Others , you can use this function.

✎

This function is only available when the

Clock Mode is set to Auto .

¦

Using the Sleep Timer

■ Sleep Timer t : Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and

180 minutes).

✎

To cancel Sleep Timer , select Off .

¦

Setting the On / Off Timer

■ Timer 1 / Timer 2 / Timer 3 : Three different on / off timer settings can be made. You must set the clock first.

Timer 1

On Time

▲

Inactivate

▼

Off Time

Inactivate

Volume

10

Repeat

Once

Source

TV

Sun Mon

00

00

Antenna

ATV

Tue Wed Thu

00

00

Channel

1

Fri Sat

L Move U Adjust E Enter R Return

On Time / Off Time : Set the hour, minute, and activate

/ inactivate. (To activate timer with the setting you’ve chosen, set to Activate .)

Volume : Set the desired volume level.

Source : Select TV or USB content to be played when the TV is turned on automatically. ( USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV ): Select ATV or

DTV .

Channel (when the Source is set to TV ): Select the desired channel.

Contents (when the Source is set to USB) : Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.

✎

If there is no music file on the USB device or the folder containing a music file is not selected, the

Timer function does not operate correctly.

✎

When there is only one photo file in the USB device, the Slide Show will not play.

20

English


✎

If a folder name is too long, the folder cannot be selected.

✎

Each USB you use is assigned its own folder.

When using more than one of the same type of

USB, make sure the folders assigned to each USB have different names.

Repeat : Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you select Manual , you can set up the day you want to

✎ activate the timer.

✎

The c mark indicates the day is selected.

Auto Power Off (available only when the TV is turned on by Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

¦

Locking Programmes

Security

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN, the default of which is “0-0-0-0”.

Change the PIN using the Change PIN option.

■ Child Lock (Off / On) : Lock channels in Channel

Manager , to prevent unauthorized users, such as children, from watching unsuitable programme.

✎

Available only when the Input source is set to TV .

■ Parental Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If selected channel is locked, the “ \ ” symbol will be displayed.

Allow All : Unlock All TV ratings.

■ Change PIN : Change your personal ID number required to set up the TV.

✎

If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to “0-0-0-0”: POWER (off) →

MUTE → 8 → 2 → 4 → POWER (on).

¦

Other Features

Language

■ Menu Language : Set the menu language.

■ Teletext Language : Set a desired language for teletext.

✎

English is the default in cases where the selected language is unavailable in the broadcast.

■ Preference (Primary Audio Language /

Secondary Audio Language / Primary Subtitle

Language / Secondary Subtitle Language /

Primary Teletext Language / Secondary Teletext

Language) : Select a language, which will be the default language when a channel is selected.

Subtitle

Use this menu to set the Subtitle mode.

■ Subtitle (Off / On) : Switches subtitles on or off.

■ Mode (Normal / Hearing Impaired) :

Sets the subtitle mode.

SUBT.

■ Subtitle Language : Sets the subtitle language.

✎

If the programme you are watching does not support the Hearing Impaired function, Normal automatically activates even if the

Hearing Impaired mode is selected.

✎

English is the default in cases where the selected language is unavailable in the broadcast.

Digital Text (Disable / Enable)

If the programme broadcasts with digital text, this feature is enabled.

✎

MHEG (Multimedia and Hypermedia Information

Coding Experts Group)

An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD

(Video-On-Demand), ITV (Interactive TV), EC (Electronic

Commerce), tele-education, tele-conferencing, digital libraries and network games.

Network (Network Type / Network Setup

/ Network Test / SWL(Samsung Wireless

Link) / SWL connect)

For details on setting up options, refer to the “Network

Connection” instructions (p. 25).

English

21


Basic Features

General

■ Game Mode (Off / On) : When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.

✎

NOTE x Precautions and limitations for game mode

– To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

– If you display the TV menu in Game Mode , the screen shakes slightly.

x Game Mode is not available when the input source is set to TV or PC.

x After connecting the game console, set Game Mode to On . Unfortunately, you may notice reduced picture quality.

x If Game Mode is On :

– Picture mode is set to Standard and Sound mode is set to Movie .

– Equalizer is not available.

■ BD Wise (Off / On) : Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise . When BD Wise is turned On , the picture mode is automatically changed to the optimal resolution.

✎

Available when connecting Samsung products that support BD Wise through a HDMI cable.

■ Menu Transparency (Bright / Dark) : Set the

Transparency of the menu.

■ Melody (Off / Low / Medium / High) : Set so that a melody plays when the TV is turned on or off.

PIP

t

You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.

✎

NOTE x For PIP sound, refer to the Sound Select instructions.

x If you turn the TV off while watching in PIP mode, the

PIP window will disappear.

x You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

x While Internet@TV is in operation, the PIP function cannot be used.

x PIP settings

Main picture

Component, HDMI1/DVI,

HDMI2, HDMI3, HDMI4,

PC

Sub picture

TV

■ PIP (Off / On) : Activate or deactivate the PIP function.

■ Channel : Select the channel for the sub-screen.

■ Size ( Õ / Ã ) : Select a size for the sub-picture.

■ Position ( Ã / – / — / œ ) : Select a position for the sub-picture.

■ Sound Select (Main / Sub) : You can choose the desired sound ( Main / Sub ) in PIP mode.

Common Interface

■ CI Menu : This enables the user to select from the CAMprovided menu. Select the CI Menu based on the menu

PC Card.

■ Application Info : View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off.

1. Purchase a CI CAM module at your nearest dealer or by phone.

2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.

3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot.

4. Check if you can see a picture on a scrambled signal channel.

Wireless Remote Control

Turn wireless remote controls on or off or give permission to wireless remote controls.

¦

Picture In Picture (PIP)

22

English


Support Menu

Self Diagnosis

✎

Self Diagnostic might take few seconds, this is part of the normal operation of the TV.

■ Picture Test (Yes / No) : Use to check for picture problems.

■ Sound Test (Yes / No) : Use the built-in melody sound to check for sound problems.

✎

If you hear no sound from the TV’s speakers, before performing the sound test, make sure

Speaker Select is set to TV Speaker in the

Sound menu.

✎

The melody will be heard during the test even if

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

■ Signal Information : (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

■ Troubleshooting : If the TV seems to have a problem, refer to this description.

✎

If none of these troubleshooting tips apply, contact the Samsung customer service centre.

Software Upgrade

Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from “www.samsung.com,” to a USB memory device.

Current Version the software already installed in the TV.

✎

Software is represented as “Year/Month/Day_Version”.

Current Version

Software Upgrade

2010/01/18_000001

By USB

By Online

By Channel

Standby Mode Upgrade

Alternative Software

►

: 45 Min

2010/01/15_00000


Installing the Latest Version

■ By USB : Insert a USB drive containing the firmware upgrade file, downloaded from

“www.samsung.com,” into the TV. Please

TV Rear Panel or be careful not to disconnect the power or remove the USB

(HDD)

USB Drive drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade.

■ By Online : Upgrade the software using the Internet.

✎

First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions.

✎

If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by

USB and upgrade.

■ By Channel : Upgrade the software using the broadcasting signal.

✎

If the function is selected during the software transmission period, software will be automatically searched and downloaded.

✎

The time required to download the software is determined by the signal status.

■ Standby Mode Upgrade : A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.

■ Alternative Software (backup): Displays the software version downloaded through By Online . During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.

English

23


Advanced Features

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

DVI OUT

AUDIO OUT

AUDIO OUT

PC OUT

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT / DTV CEA

Resolution

640 x 350

720 x 400

640 x 480

832 x 624

1152 x 870

720 x 576

1152 x 864

1280 x 720

1280 x 960

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1152 x 864

1280 x 1024

1280 x 1024

1280 x 720

1280 x 800

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1440 x 900

1600 x 1200

1680 x 1050

1280 x 720

1280 x 1024

1920 x 1080p

Horizontal Frequency

(KHz)

31.469

31.469

35.000

49.726

68.681

35.910

53.783

56.456

75.231

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

45.000

49.702

62.795

60.000

47.712

55.935

70.635

75.000

65.290

52.500

74.620

67.500

Vertical Frequency

(Hz)

70.086

70.087

66.667

74.551

75.062

59.950

59.959

74.777

74.857

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

60.000

59.810

74.934

60.000

60.015

59.887

74.984

60.000

59.954

70.000

70.000

60.000

Pixel Clock Frequency

(MHz)

25.175

28.322

30.240

57.284

100.000

32.750

81.750

95.750

130.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

108.000

135.000

74.250

83.500

106.500

108.000

85.500

106.500

136.750

162.000

146.250

89.040

128.943

148.500

✎

NOTE x For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x The interlace mode is not supported.

x The set might operate abnormally if a non-standard video format is selected.

x Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

24

English

Sync Polarity

(H / V)

+/-

-/+

-/+

-/+

-/+

-/+

-/-

-/-

-/-

+/+

+/+

-/+

-/+

+/+

-/-

-/-

+/+

+/+

+/+

+/+

-/+

-/+

+/+

-/+

-/-

-/-

-/-

+/+

+/+

+/+

-/+

-/-

+/+


Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

¦

Connecting to a Wired Network

You can attach your TV to your LAN using cable in three ways: y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat

5 cable. See the diagram below.

TV Rear Panel

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

Modem Cable LAN Cable y You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use Cat 5 cable for the connection. See the diagram below.

TV Rear Panel

The Modem Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

IP Sharer

(having DHCP server)

Modem Cable LAN Cable LAN Cable y Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

TV Rear Panel

The LAN Port on the Wall

LAN Cable

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration

Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are

Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.

✎

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses.

English

25


Advanced Features

Network Setup (Auto)

Use the Automatic Network Setup when connecting your

TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:

How to set up automatically

1. Connect your TV to your LAN as described in the previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select Setup , and then press the ENTER E button.

3. Use the ▲ or ▼ button to select Network in the Setup menu, and then press the ENTER E button. The

Network screen appears.

Network

Network Type

Network Setup

Network Test

SWL(Samsung Wireless Link)

SWL connect

: Wired

: Off

►


4. On the Network screen, select Network Type .

5. Set Network Type to Wired .

6. Select Network Setup . The Network Setup screen appears.

Network Setup

Internet Protocol Setup

IP Address

Subnet Mask

Gateway

: Auto

:

:

:

►

DNS

DNS Server

: Auto

:


7. Set Internet Protocol Setup to Auto .

8. Auto acquires and enters the needed Internet values automatically.

9 When done, press the RETURN button on your remote.

10. Select Network Test to check the Internet connectivity.

11. If the Network Function has not acquired the network connection values, go to the directions for Manual .

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The

Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up automatically” procedure.

2. Set Internet Protocol Setup to Manual .

3. Press the ▼ button on your remote to go to the first entry field.

4. Enter the IP Address , Subnet Mask , Gateway , and

DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another.

5. When done, press the RETURN button on your remote.

6. Select Network Test to check the Internet connectivity.

26

English


¦

Connecting to a Wireless Network

To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter

(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.

✎

To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.

TV Rear Panel

The LAN Port on the Wall

Wireless IP Sharer

(AP having DHCP server) or

(HDD)

LAN Cable

Samsung Wireless LAN

Adapter

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.

com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play smoothly.

✎

NOTE x You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network. x Samsung’s Wireless LAN Adapter is sold separately. The Samsung Wireless LAN Adapter is offered by select retailers, Ecommerce sites and Samsungparts.com. x To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports

DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. x Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. x If you apply a security system other than the systems listed blow, it will not work with the TV. x If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-

AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. x If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button

Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.

x If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.” x Connection Methods : You can setup the wireless network connection six ways.

– Samsung Auto Configuration

– PBC (WPS)

– Auto Setup (Using the Auto Network Search function)

– Manual Setup

– SWL(Samsung Wireless Link)

– Ad-Hoc x The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via a USB extension cable other than the one available from Samsung.

[UC6000-XU]BN68-02748D-01Eng.indb 27

English

27

2010-04-01 오후 7:23:42

Advanced Features

Notice

The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN

Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN

Adapter using a USB cable in a place that is not affected by radio interference.

Method 1

Connect using the USB right angle adapter

Method 2

Connect via an extension cable

✎

The Samsung Wireless LAN Adapter should be installed in an interference-free area in order to avoid interference between the adapter and tuner.

or

Network Setup (Samsung Auto

Configuration)

This function is available in APs (Access Points) that support

Auto Configuration. If your AP does not, you can connect through PBC (WPS) , auto, or manually.

✎

This function is available when SWL(Samsung

Wireless Link set to Off .

✎

You can check for equipment that supports Samsung

Auto Configuration on www.samsung.com.

How to set up using Samsung Auto Configuration

1. Place the AP and TV next to each other and turn them on.

✎

Because the booting times of applications differ, you may have to wait for approximately 2 minutes.

✎

If the LAN cable connected the WAN port of AP during Samsung Auto Configuration, you are able to complete until internet connection test. If you do not connect, Samsung Auto Configuration will check only device connecting of AP (Not check internet).

2. After 2 minutes, connect the Samsung Wireless LAN

Adapter to the TV. When the Samsung Wireless LAN

Adapter is established, the pop-up window appears.

3. As soon as a connection is established, place the AP in parallel with the Samsung Wireless LAN Adapter giving a gap no larger than 25cm.

4. Wait until the connection is automatically established.

✎

If Samsung Auto Configuration does not connect your TV to your AP, a pop-up window appears on the screen notifying you of the failure. Reset the AP, and then try again. If the connection fails again, choose one of the other connection setup methods, PBC (WPS), auto, or manual.

5. After the connection is established, locate the sharer at the desired location.

✎

If the AP settings have been changed or it is the first time you use the new AP after purchase, you need to set up again beginning from Step 1.

Network Setup (PBC (WPS))

How to set up using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1. Connect your TV to your LAN as described in the previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select Setup , and then press the ENTER E button.

3. Use the ▲ or ▼ button to select Network in the Setup menu, and then press the ENTER E button.

4. On the Network screen, select Network Type .

5. Set Network Type to Wireless .

6. Select Network Setup . The Network Setup screen appears.

28

English


Network Setup

Select a Network

Internet Protocol Setup

IP Address

Subnet Mask

Gateway

DNS

DNS Server

: Not Selected ►

: Auto

:

:

:

: Auto

:

PBC(WPS) U Move E Enter R Return

7. Press the Red button on your remote.

8. Press the PBC (WPS) button on your router within 2 minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.

9. After the network connection is set up, press the

RETURN button to exit the Network Setup screen.

Network Setup (Auto)

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security

Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.

How to set up automatically

To set up the wireless connection automatically, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)” (p. 28).

2. Press the ▼ button to select Internet Protocol Setup , and then press the ENTER E button. Press the

▲ or ▼ button to select Auto , and then press the

ENTER E button.

3. Press the ▲ button to go to Select a Network , and then press the ENTER E button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.

4. In the list of networks, press the ▲ or ▼ button to select a network, and then press the ENTER E button.

✎

If the AP is set to Hidden (Invisible), you have to select Add Network and enter the correct

Network Name (SSID) and Security Key to establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the

Network Connecting Screen appears, go to Step 10.

6. Press the ▲ or ▼ button to select Security or PIN . For most home networks, you would select Security (for

Security Key ). The Security Screen appears.

Network Setup

Security Key

A

H

O

V

B

I

P

W

C

J

Q

X

D

K

R

Y

E

L

S

Z

F

M

T

G

N

U

0 entered

0~9 Number

Lower case

B

Delete

Space n Move E Enter R Return

7. On the Security screen, enter your network’s Pass

Phrase.

✎

You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem.

8. To enter the Pass Phrase, follow these general directions:

– Press the number buttons on your remote to enter numbers.

– Use the direction buttons on your remote to move from button to button on the Security Key screen.

– Press the Red button to change case or display symbols/characters.

– To a enter letter or symbol, move to the letter or symbol, and then press the ENTER E button.

– To delete the last letter or number you entered, press the Green button on your remote.

9. When done, press the Blue button on your remote. The

Network Connecting screen appears.

10. Wait until the connection confirmation message is displayed, and then press the ENTER E button. The

Network Setup screen re-appears.

11. To test the connection, press the RETURN button to select Network Test , and then press the ENTER E button.

[UC6000-XU]BN68-02748D-01Eng.indb 29

English

29

2010-04-01 오후 7:23:44

Advanced Features

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point through the “Samsung Wireless LAN Adapter” by using a peer to peer network.

✎

This function is available when SWL(Samsung

Wireless Link) is set to Off .

How to connect to new Ad-hoc device


PBC (WPS)” (p. 28).

2. Choose Select a Network . A list of devices/networks appears.

3. While in the device list, press the Blue button on the remote.

✎

The message Ad-hoc is a direct Wi-Fi connection with cell phone or PC. The existing network system may have limited functionality.

Do you want to change the network connection?

is displayed.

4. Input the generated Network Name (SSID) and

Security Key into the device you want to connect.

How to connect an existing Ad-hoc device


PBC (WPS)” (p. 28).

2. Choose Select a Network . The Device/Network list appears.

3. Select the device you want in the Device list.

4. If security key is required, input the security key.

✎

If network doesn’t operate normally, check the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction.

Network Setup (Manual)

If the other methods do not work, you need to enter the

Network setting values manually.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the screen.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support tab, click the Details button. The

Network settings are displayed.

How to set up manually

To enter the Network connection values manually, follow these steps:


PBC (WPS)” (p. 28).

2. Press the ▼ button to select Internet Protocol Setup , and then press the ENTER E button. Press the ▲ or ▼ button to select Manual , and then press the

ENTER E button.

3. Press the ▼ button to go to the first entry field (IP

Address).

4. Use the number buttons to enter numbers.

5. When done with each field, use the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back.

6. Enter the IP Address , Subnet Mask , and Gateway values.

7. Press the ▲ or ▼ button to go to DNS .

8. Press the ▼ button to go to the first DNS entry field.

Enter the numbers as above.

9. When done, press the ▲ button to go to Select a

Network . Select your network, and then press the

ENTER E button.

10. Go to Step 4 in the “How to set up automatically”

(p. 29), and follow the directions from that point on.

30

English


SWL(Samsung Wireless Link)

This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV.

✎

If a Samsung Wireless LAN Adapter is connected to the

USB 2 port, the network may not operate normally. We recommend to connecting it to the USB 1 (HDD) port.

✎

Only sharers using the 2.4 Ghz band are supported.

Sharers using the 5 Ghz band are not supported.

SWL connect

You can directly connect a device that supports the PBC

(WPS) to the TV.

✎

This function is available when

SWL(Samsung Wireless Link) is set to On .

How to connect Samsung Wireless Link

For the procedures to establish a connection, refer to the following:


PBC (WPS)” (p. 28).

2. Select SWL(Samsung Wireless Link) by using the ▼ button and press the ENTER E button to turn it On.

3. Select SWL connect by using the ▼ button and press the ENTER E button.

4. If the “ Press the PBC button on the PBC(WPS) supported device to connect within 120 seconds.

” message appears, press the PBC button on the device to connect.

✎

For more information, refer to the wireless network setup manual of the device to be connected.

5. If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically.

✎

If the connection fails, please retry after 2 minutes.

If Your TV Fails to Connect to the Internet

Your TV may not be able to connect to the Internet because your ISP has permanently registered the

MAC address (a unique identifying number) of your

PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.

To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC

(such as your TV) to the Internet.

If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet.

The internet connection may fail because of a firewall problem. If this is the case, contact your Internet service provider.

If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG.

[UC6000-XU]BN68-02748D-01Eng.indb 31

English

31

2010-04-01 오후 7:23:44

Advanced Features

Media Play

MEDIA.P

Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your PC.

MediaPlay

Videos

SUM Change Device

¦

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie files to the USB 1

(HDD) or USB 2 jack on the side of the TV.

3. When USB is connected to the TV, popup window appears. Then you can select

Media Play .

TV Rear Panel

(HDD)

View Devices E Enter R Return or

USB Drive

¦

Connecting to the PC through network

You can play pictures, music and videos saved on your PC through a network connection in the Media Play mode.

✎

If you use Media Play through saved file on your PC, you should download “PC Share Manager” and users manual from

“www.samsung.com.”

LAN

External Modem

(ADSL/VDSL/Cable TV)

PC

TV Rear Panel or

Samsung

Wireless LAN

Adapter

Wireless IP Sharer

LAN Cable Modem Cable

LAN Cable LAN Cable LAN Cable

1. For more information on how to configure your network, refer to “Network Connection.” (p. 25).

– You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:

123.456.789.**)

2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager programme will be installed.

– You can connect the TV to the PC directly without connecting it through a Sharer (Router).

32

English


✎

No supported functions when connecting to the PC through network: x The Background Music and Background Music Setting functions.

x Sorting files by preference in the Photos , Music , and Videos folders.

x The � (REW) or µ (FF) button while a movie is playing.

✎

The Divx DRM, Multi-audio, embedded caption does not supported.

✎

✎

Samsung PC Share manager should be permitted by the firewall programme on your PC.

When you use Media Play mode through a network connection, According to functions of the provided server: x The sorting method may vary.

x The scene search function may not be supported.

x The Play Continuously function, which resumes playing of a video, may not be supported.

– The Play Continuously function does not support multiple users. (It will have only memorised the point where the most recent user stopped playing.) x The ◄ or ► button may not work depending on the content information.

x You may experience file stuttering while playing a video in Media Play through a network connection.

✎

It might not work properly with unlicenced multimedia files.

✎

Need-to-Know List before using Media Play x MTP (Media Transfer Protocol) is not supported.

x The file system supports FAT16, FAT32 and NTFS.

x Certain types of USB Digital camera and audio devices may not be compatible with this TV.

x Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. x Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

SAMSUNG is not responsible for any data file damage or data loss.

x Connect a USB HDD to the dedicated port, USB 1 (HDD) port.

x Do not disconnect the USB device while it is loading.

x The higher the resolution of the image, the longer it takes to display on the screen.

x The maximum supported JPEG resolution is 15360X8640 pixels.

x For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

x If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.

x MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management

(DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.

x If more than 2 PTP devices are connected, you can only use one at a time.

x If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.

x If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.

x If the TV has been no input during time set in Auto Protection Time , the Screensaver will run.

x The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.

x If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

x If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.

x If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC to permanently delete the file.

English

33


Advanced Features

¦

Screen Display

Move to the file you desired using the up/down/right/left buttons and then press the ENTER E or � (Play) button. The file is played.

✎

Supports the View Devices and Home in Media Play homepage.

Information:

You can ascertain the selected file name and the number of files and page.

Videos

/Movie 01.avi

Movie 01.avi

Jan.10.2010

Movie 02.avi

1/1 Page

Jan.10.2010

Movie 03.avi

Movie 04.avi

Sort List Section:

Displays sorting standard.

✎

Sorting standard is different depending on the contents.

Movie 05.avi

Movie 07.avi

Movie 09.avi

SUM Change Device

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Movie 06.avi

Movie 08.avi

Movie 10.avi

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Select Sorting T Tools

File List Section:

You can confirm the files and groups that is sorted by each category.

Operation Buttons

B

Red ( Change Device ): Selects a connected device.

Green ( Preference ): Sets the file preference. (not supported in Basic view)

Yellow ( Select ): Selects multiple files from file list. Selected files are marked with a symbol.

Blue ( Sorting ): Selects the sort list.

T Tools : Displays the option menu.

✎ Using the � (REW) or µ (FF) button, file list can move to next or previous page.

Videos

Playing Video

1. Press the ◄ or ► button to select Videos , then press the ENTER E button in the Media Play menu.

2. Press the ◄ / ► / ▲ / ▼ button to select the desired file in the file list.

3. Press the ENTER E button or � (Play) button.

– The selected file is displayed on the top with its playing time.

– If video time information is unknown, play time and progress bar are not displayed.

– During playing the video, you can search using the ◄ and ► button.

✎

In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.

Movie 01.avi

00:04:03 / 00:07:38 y Supported Subtitle Formats

Name

MPEG-4 time-based text

SAMI

SubRip

SubViewer

Micro DVD

File extension

.ttxt

.smi

.srt

.sub

.sub or .txt

Format

XML

HTML string-based string-based string-based

SUM

1/1

E Chaptering L Jump T Tools R Return

34

English


y Supported Video Formats

File Extension Container

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

AVI

MKV

ASF

ASF

MP4

3GPP

VRO

VOB

PS

TS

Video Codec

Divx 3.11 / 4.x / 5.1 / 6.0

XviD

H.264 BP / MP / HP

MPEG4 SP / ASP

Motion JPEG

Divx 3.11 / 4.x / 5.1 / 6.0

XviD

H.264 BP / MP / HP

MPEG4 SP / ASP

Motion JPEG

Window Media Video v9

H.264 BP / MP / HP

MPEG4 SP / ASP

XVID

H.264 BP / MP / HP

MPEG4 SP / ASP

MPEG1

MPEG2

MPEG1

MPEG2

H.264

MPEG2

H.264

VC1

Resolution

1920x1080

1920x1080

1920x1080

1920x1080

800x600

1920x1080

1920x1080

1920x1080

1920x1080

800x600

1920x1080

1920x1080

1920x1080

1920x1080

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

1920x1080 6 ~ 30

1920x1080 6 ~ 30

1920x1080 24 / 25 / 30

1920x1080 24 / 25 / 30

1920x1080 24 / 25 / 30

Frame rate

(fps)

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

6 ~ 30

1920x1080 24 / 25 / 30

1920x1080 6 ~ 30

1920x1080 24 / 25 / 30

1920x1080

1920x1080

6 ~ 30

6 ~ 30

25

8

30

30

30

8

25

25

8

8

30

25

30

25

25

8

8

8

25

8

Bit rate

(Mbps)

8

8

25

8

Audio Codec

MP3 / AC3 / LPCM /

ADPCM / DTS Core

MP3 / AC3 / LPCM /

ADPCM / WMA

WMA

MP3 / ADPCM / AAC

ADPCM / AAC / HE-AAC

AC3 / MPEG / LPCM

AC3 / MPEG / LPCM / AAC

AC3 / AAC / MP3 / DD+ /

HE-AAC

Other Restrictions

✎

NOTE x If there are problems with the contents of a codec, the codec will not be supported.

x If the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly.

x Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.

x If the Index Table is in error, the Seek (Jump) function is not supported.

Video Decoder

• Supports up to H.264, Level 4.1

• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

• XVID, MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

• GMC 2 over is not supported.

• H.263 is not supported.

• Only Samsung Techwin MJPEG is supported.

Audio Decoder

• Supports up to WMA 7, 8, 9, STD

• WMA 9 PRO does not support 2 channel excess multi channel or lossless audio.

• WMA sampling rate 22050Hz mono is not supported.

[UC6000-XU]BN68-02748D-01Eng.indb 35

English

35

2010-04-01 오후 7:23:48

Advanced Features

Playing movie file continuously (Resume Play)

If you exit the playing Videos function, it can be played later from the point where it was stopped.

✎

If you press the ENTER E button ( Chaptering ) during playing the file, you can explore scene divided into 5 chapters

✎ you want.

If the index information is damaged or unsupported, you will not be able to use the Chaptering function.

1. Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the file list section.

Movie 01.avi

00:04:03 / 00:07:38 1/1

2. Press the � (Play) / ENTER E button.

3. Select Play Continuously (Resume Play) by pressing the Blue button. The Movie will begin to play from where it was stopped.

✎

The Blue button is available when resuming play.

✎

If the Cont. movie play help function is set to On in the

Settings menu, a pop-up message will appear when you resume play a movie file.

Play continuously

Resumes playing from the last viewed scene.

Play continuously E Chaptering L Jump T Tools R Return SUM

Music

Playing Music

1. Press the ◄ or ► button to select Music , then press the

ENTER E button in the Media Play menu.

I Love you

Jhon

Playlist 3/15


I Love You

Jhon


– During playing the music, you can search using the ◄ and ► button.

1st Album

Pop

2010

4.2MB

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

– � (REW) and µ (FF) buttons do not function during play.

✎

Only displays the files with MP3 and PCM file extension. Other file extensions are not displayed, even if they are saved on the same USB device.

SUM

01:10 / 04:02

Music 4

No Singer

Music 5

No Singer

E Pause L Jump T Tools R Return

✎

If the sound is strange when playing MP3 files, adjust the may cause a sound problem.)

Equalizer in the Sound menu. (An over-modulated MP3 file

✎

You can create My Playlist selecting the desired music in the file, and can play My Playlist .

Photos

Viewing a Photo (or Slide Show)

1. Press the ◄ or ► button to select Photos , then press the

ENTER E button in the Media Play menu.



– While a photo list is displayed, press the � (Play) /

ENTER E button on the remote control to start slide show.

– All files in the file list section will be displayed in the slide show.

– During the slide show, files are displayed in order from currently being shown.

✎

Music files can be automatically played during the Slide Show if the Background Music is set to On .

✎

The BGM Mode loading.

cannot be changed until the BGM has finished

Normal

SUM

Image1024.jpg 1024x768 2010/2/1 3/15

E Pause L Previous/Next T Tools R Return

36

English


¦

Playing the Multiple Files

Playing the selected video/music/photo files

1. Press the Yellow button in the file list to select the desired file.

2. Repeat the above operation to select multiple files.

✎

NOTE x The c mark appears to the left of the selected files.

x To cancel a selection, press the Yellow button again. x To deselect all selected files, press the and select Deselect All .

TOOLS button

3. Press the TOOLS button and select Play Selected Contents .

Playing the video/music/photo file group

1. While a file list is displayed, move to the any file in desired group.

2. Press the TOOLS button and select Play Current Group .

Videos /Movie 01.avi

Movie 01.avi

Jan.10.2010

Movie 03.avi

Jan.10.2010

Movie 05.avi

Jan.10.2010

Movie 07.avi

Jan.10.2010

Movie 09.avi

Jan.10.2010

SUM Change Device

2 files selected 1/1 Page

Movie 02.avi

Jan.10.2010

Movie 04.avi

Jan.10.2010

Movie 06.avi

Jan.10.2010

Movie 08.avi

Jan.10.2010

Movie 10.avi

Jan.10.2010

Select Sorting T Tools

¦

Media Play Additional Function

Sorting the file list

Press the Blue button in the file list to sort the files.

Category

Basic View

Title

Preference

Latest Date

Earliest Date

Artist

Album

Genre

Mood

Monthly

Operations

It shows whole folder. You can view the photo by selecting the folder.

It sorts and displays the file title in Symbol/Number/Alphabet/Special order.

It sorts and displays the file by preference. You can change the file preference in the file list section using the Green button.

It sorts and shows files by latest date.

It sorts and shows files by earliest date.

It sorts the music file by artist in alphabetical.

It sorts the music file by album in alphabetical order.

It sorts music files by the genre.

It sorts music files by the mood. You can change the music mood information.

It sorts and shows photo files by month. It sorts only by month (from January to December) regardless of year.

Videos Music

>

>

>

>

> >

>

>

>

>

>

>

Photos

>

>

>

>

>

>

[UC6000-XU]BN68-02748D-01Eng.indb 37

English

37

2010-04-01 오후 7:23:52

Advanced Features

Videos/Music/Photos Play Option menu

During playing a file, press the TOOLS button.

Category

Title

Repeat Mode

Picture Size

Picture Setting

Sound Setting

Subtitle Setting

Audio

Operations

You can move the other file directly.

You can play recorded, movie and music files repeatedly.

You can adjust the picture size for preference.

You can adjust the picture setting. (p. 15, 16, 17, 18)

You can adjust the sound setting. (p. 18, 19, 20)

You can play the video file with subtitles. This function only works if the subtitles are the same file name as the video file.

You can enjoy video in one of supported languages as required. The function is only enabled when stream-type files which support multiple audio formats are played.

You can start or stop a slide show.

Stop Slide Show /

Start Slide Show

Slide Show Speed

Background Music

Zoom

Rotate

Information

You can select the slide show speed during the slide show.

You can set and select background music when watching a slide show.

You can zoom into images in full screen mode.

You can rotate images in full screen mode.

You can see detailed information about the played file.

Videos

>

>

>

>

>

>

>

Music Photos

>

>

>

>

> >

>

>

>

>

>

>

Settings

Using the Setup Menu

■ Cont. movie play help (Resume Play) (On / Off) : Select to display the help pop-up message for continuous movie playback.

■ Get the DivX® VOD registration code : Shows the registration code authorized for the TV. If you connect to the DivX web site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD registration using Media Play, the registration is completed.

✎

For more information on DivX® VOD, visit “www.DivX.com.”

■ Get the DivX® VOD deactivation code : When DivX® VOD is not registered, the registration deactivation code is displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.

■ Information : Select to view information about the connected device.

38

English


Anynet+

What is Anynet+? t

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung

TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your

Samsung device has this feature, check if there is an Anynet+ logo on it.

To connect to Home Theatre

Anynet+

Device 1

Anynet+ Device

2, 3, 4

TV Rear Panel

Home Theatre

Optical Cable

HDMI Cable HDMI Cable

HDMI Cable

1. Connect the HDMI IN ( 1(DVI), 2, 3 or 4 ) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.

2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an

HDMI cable.

✎

NOTE x Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre.

x When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the

Amplifier or Home Theatre, not the TV.

x Connect only one Home Theatre.

x You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.

x Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.

x Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

[UC6000-XU]BN68-02748D-01Eng.indb 39

English

39

2010-04-01 오후 7:23:53

Advanced Features

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu

View TV

Device List

(device_name)

(device_name)

Recording

MENU

INFO

: (*recorder)

Description

Changes Anynet+ mode to TV broadcast mode.

Shows the Anynet+ device list.

Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.

Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear.

Starts recording immediately using the recorder. (This is only available for devices that support the recording function.)

Stop Recording : (*recorder) Stops recording.

Receiver Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

¦

Setting Up Anynet+

■ Setup

Anynet+ (HDMI-CEC) (Off / On) : To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On .

✎

When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Auto Turn Off (No / Yes) : Setting an Anynet+ Device to turn off automatically when the TV is turned off.

✎

The active source on the TV must be set to TV to use the Anynet+ function.

✎

Even if an external device is still recording, it may turn off.

¦

Switching between Anynet+ Devices

1. Anynet+ devices connected to the TV are listed.

✎

If you cannot find a device you want, press the Red button to refresh the list.

2. Select a device and press the ENTER E button. You can switch to the selected device.

✎

Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.

x Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.

x If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.

Make sure to switch to an Anynet+ device by using the Device List .

¦

Recording

You can make a recording of a TV Programme using a Samsung recorder.

1. Select Recording .

✎

When there are more than two recording devices x When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List .

✎

When the recording device is not displayed, select Device List and press the Red button to search devices.

2. Press the EXIT button to exit.

✎

You can record the source streams by selecting Recording : (device_name).

✎

Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

✎

Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

40

English


¦

Listening through a Receiver

You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker .

1. Select Receiver and set to On .

2. Press the EXIT button to exit.

✎

If your receiver supports audio only, it may not appear in the device list.

✎

The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO

OUT (OPTICAL) jack of the TV.

✎

When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the

TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.

✎

NOTE x You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.

x The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.

x The Anynet+ functions do not operate with other manufacturers’ products.

¦

Troubleshooting for Anynet+

Problem Possible Solution

Anynet+ does not work.

I want to start Anynet+.

I want to exit Anynet+.

• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.

• Connect only one receiver (home theatre).

• Check if the Anynet+ device power cord is properly connected.

• Check the Anynet+ device’s Video/Audio/HDMI cable connections.

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

• Check whether the TV remote control is in TV mode.

• Check whether it is Anynet+ exclusive remote control.

• Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial setup), etc.)

• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again.

• Check if the Anynet+ Function of Anynet+ device is set on.

• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to

On in the Anynet+ Setup menu.

• Press the TOOLS button to display the Anynet+ menu and select a menu you want.

• Select View TV in the Anynet+ menu.

• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.

• Press P > / < , and PRE-CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.)

The message “Connecting to

Anynet+ device...” appears on the screen.

• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.

• Use the remote control when the Anynet+ setting or switching to view mode is complete.

The Anynet+ device does not play.

• You cannot use the play function when Plug & Play (Initial setup) is in progress.

The connected device is not displayed.

The TV Programme cannot be recorded.

The TV sound is not output through the receiver.

• Check whether or not the device supports Anynet+ functions.

• Check whether or not the HDMI cable is properly connected.

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

• Search Anynet+ devices again.

• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions.

• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan.

• Check whether the antenna jack on the recording device is properly connected.

• Connect the optical cable between TV and the receiver.

English

41


Advanced Features

AllShare

¦

About AllShare

AllShare connects your TV, mobile phones and other devices which are compatible through a network. On your

TV, you can view call arrivals, SMS messages and schedules set on your mobile phones. In addition, you can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. Additionally, you can use your TV as a monitor for your mobile when browsing a web page.

✎

For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device's user’s guide.

¦

Setting Up AllShare

Setup

■ Message (On / Off) : Enables or disables the message function (for call arrivals, SMS messages and schedules set on your mobile phones).

■ Media (On / Off) : Enables or disables the media function. When the media function is on, it plays videos, photos and music from a mobile phone or other device that supports AllShare .

■ ScreenShare (On / Off) : Enables or disables the

ScreenShare function for using mobile phone as a remote control.

■ TV name : Sets the TV name so you can find it easily on a mobile device.

✎

If you select User Input , you can type on the TV using the OSK (On Screen Keyboard).

AllShare™

Setup

Message

Media

ScreenShare

Message

Media

ScreenShare

TV name

: On

: On

: On

: Home TV

3/7

Message / Media / ScreenShare

Shows a list of mobile phones or connected devices which have been set up with this TV for using the Message ,

Media , or ScreenShare function.

✎

The Media function is available in all mobile devices which support AllShare .

■ Allowed / Denied : Allows/Blocks the mobile phone.

■ Delete : Deletes the mobile phone from the list.

✎

This function only deletes the name of the mobile from the list. If the deleted mobile device is turned on or trys to connect to the TV, it may appear on the list again.

Using the Message Function

Using this function, you view call arrivals, SMS messages and schedules set on the mobile phone through the alarm window while watching TV.

✎

NOTE x To disable the alarm window, set Message to Off in

Setup of AllShare .

x If OK is selected, or if OK is not selected after the message has appeared three times, the message will be deleted. The message is not deleted from the mobile phone.

x The alarm window can be displayed while using some applications such as Media Play etc. To view the contents of a message, switch to TV viewing mode.

x When a message from an unknown mobile phone is displayed, select the mobile phone on the message menu in AllShare and select Denied to block the phone.

Message View

If a new SMS message arrives while you are watching

TV, the alarm window appears. If you click the OK button, the contents of the message are displayed.

✎

You can configure the viewing settings for SMS messages on your mobile phones. For the procedures, refer to the mobile phone manual.

✎

Some types of characters may be displayed as blank or broken characters.

E Select R Return e Exit

Setup R Return

42

English


Call Arrival Alarm

If a call arrives while you are watching TV, the alarm window appears.

Schedule Alarm

While you are watching TV, the alarm window appears to display the registered event.

✎

You can configure viewing settings for schedule contents on your mobile phones. For the procedures, refer to the mobile phone manual.

✎

Some special characters may be displayed as blank or broken characters.

Using the Media Function

An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears.

If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played.

✎

NOTE x If the media function executes for the first time, the warning popup window appears. Press the

ENTER E button to select Allow , then you can use

Media function on that device.

“Unknown Device 0” is requesting that the media file be allowed to play.

If you wish to allow the media file to be played at your device, please press

“Allow”, otherwise press “Deny”.

You can also change the setting (or resetting) of this feature at “AllShare

Setup”.

Warning: Please note that if your device is connected to unsecured or unfamiliar network, unwanted or inappropriate contents might be played.

If you are not sure about the network's identity or content’s appropriateness, we strongly recommend that you do not “Allow” the request to play.

Allow Deny x To turn off the media contents transmission from the mobile phone, set Media to Off in the AllShare setup. x Contents may not be played on your TV depending on their resolution and format.

x The ENTER E and ◄ / ► buttons may not work depending on the type of media content.

x Using the mobile device, you can control the media playing. For details, refer to each mobile’s user’s guide.

x When you want to play media contents from your PC, select the PC icon on the main display of AllShare . Then the TV’s Media Play menu automatically changes. For more detail information, refer to “Media Play” (p. 32).

Using ScreenShare Function

Screenshare displays the same web page as provide in mobile. Using ScreenShare, you can open the various contents saved in a mobile phone. For example, the image below displays an access page for contents from a mobile.

You can read the mobile’s various files and view the phone book and calendar on the TV. Also, in phone book, you can make a call to other person, or can send to SMS.

✎

NOTE x In Samsung mobile, ScreenShare must be installed and the supporting application must be executed; then you can use the ScreenShare function.

x Available buttons on your remote control may vary for each page.

x Doc Viewer can read files in doc format, but cannot modify them.

x The screen display may differ depending on the connected device.

My Mobile

Contacts Calendar Doc Viewer

E Select Return

Using your Samsung phone to control your TV Simply

Before you can use this feature, you must connect to a Samsung mobile phone that supports ScreenShare functions. When operating the TV with your mobile phone, only the POWER , Y , P < / > and MUTE buttons are supported.

✎

Even if you keep pressing down on a control button

(channel or volume) on the mobile phone, the value will only go up or down by one unit.

[UC6000-XU]BN68-02748D-01Eng.indb 43

English

43

2010-04-01 오후 7:23:54

Analogue Channel Teletext Feature

The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.

✎

You can change Teletext pages by pressing the numeric buttons on the remote control.

1 / (Teletext on/mix/off):

Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext.

2 8 (store): Stores the Teletext pages.

3 4 (size): Displays the teletext on the upper half of the screen in double-size. To move the text to the lower half of the screen, press it again. For normal display, press it once again.

4 9 (hold): Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again.

5

Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed. Items can be selected in the same way.

To display the previous or next page, press the corresponding coloured button.

6 0 (mode): Selects the Teletext mode (LIST/ FLOF).

If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8 (store) button.

7 1 (sub-page): Displays the available sub-page.

1

2

3

4

5

G TTX/MIX

TOOLS

SOURCE

CH LIST

MENU

PRE-CH

INFO

RETURN

A B C

EXIT

D

6

7

8

9

2 (page up): Displays the next

Teletext page.

3 (page down): Displays the previous Teletext page.

6 (index): Displays the index

(contents) page at any time while you are viewing Teletext.

5 (reveal): Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again.

7 (cancel): Shrinks the Teletext display to overlap with the current broadcast.

8

9

0

!

@

Typical Teletext page

0

!

@

Part Contents

A Selected page number.

B

C

Broadcasting channel identity.

Current page number or search indications.

D

E

F

Date and time.

Text.

Status information.

FASTEXT information.

44

English


1

2

3

Assembling the Cables

Stand Type

Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand.

1

2

3

Wall-Mount Type

✎

Do not pull the cables too hard when arranging them. This may cause damage to the product’s connection terminals.

[UC6000-XU]BN68-02748D-01Eng.indb 45

English

45

2010-04-01 오후 7:23:56

Other Information

Installing the Wall Mount

Assembling the Blanking Bracket

When installing the TV onto a wall, attach the Blanking Bracket as shown.

Blanking Bracket

Assembling Power-Cord

When Installing the TV onto a wall, attach the Power-Cord as shown.

1 2 3

1. Remove the screw shown in the first picture above.

2. Attach the power cord clamp to the power cord.

3. Mount the power cord clamp to the TV, using the removed screw, as shown.

Preparing before installing Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

1

1

To install a wall-mount, use the Holder-Ring 1 .

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the

TV on your own.

46

English


Wall Mount Kit Specifications (VESA)

✎

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE x Standard dimensions for wall mount kits are shown in the table below.

x When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

x Do not use screws that do not comply with the VESA standard screw specifications.

x Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

x For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.

x Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

x Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

x Do not mount the TV at more than a 15 degree tilt.

Product Family inches

LED-TV

[Ultra-Slim]

19~22

23~29

32~37

40~55

56~65

VESA Spec. (A * B) Standard Screw Quantity

75 X 75

200 X 100

200 X 200

400 X 400

600 X 400

M4

M8

4

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

[UC6000-XU]BN68-02748D-01Eng.indb 47

English

47

2010-04-01 오후 7:23:59

Other Information

Anti-theft Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer.

Refer to the manual provided with the Kensington Lock for additional information on proper use.

✎

Please find a “ K ” icon on the rear of the TV. A kensington slot is beside the

“ K ” icon.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.

2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the product ( 1 ).

<TV Rear>

<Optional>

4. Lock the lock.

✎

These are general instructions. For exact instructions, see the User manual supplied with the locking device.

✎

The locking device has to be purchased separately.

✎

The location of the Kensington slot may be different depending on the TV model.

1

Securing the TV to the wall

Caution : Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and safety, install the anti-fall device as follows.

¦

To Avoid the TV from Falling

1. Put the screws into the clamps and firmly fasten them onto the wall.

Confirm that the screws have been firmly installed onto the wall.

✎

You may need additional material such as an anchor depending on the type of wall.

✎

Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

✎

Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

✎

Screw Specifications x For a 19 ~ 22 inch : M4 x For a 23 ~ 65 inch : M8

3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly.

✎

NOTE x Install the TV near to the wall so that it does not fall backwards.

x It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

x Untie the cable before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

48

English

Wall


Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.

samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues

Picture Quality

The TV image does not look as good as it did in the store.

The picture is distorted: macro block error, small block, dots, pixelization

Colour is wrong or missing.

There is poor colour or brightness.

There is a dotted line on the edge of the screen.

The picture is black and white.

When changing channels, the picture freezes or is distorted or delayed.

Sound Quality

Solutions and Explanations

First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.

(go to MENU - Support - Self Diagnosis - Picture Test ) (p. 23)

If the test image is properly displayed, the poor picture may caused by the source or signal.

• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality.

• Cable/Satellite subscribers: Try HD stations from the channel line up.

• Antenna connection: Try HD stations after performing Auto programme.

✎ Many HD channels are up scaled from SD(Standard Definition) contents.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

• Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.

• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies.

• Low signal level or bad quality can cause picture distortion. This is not a TV issue.

• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.

• If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.

• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness )

(p. 15)

• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution -

Energy Saving ) (p. 15)

• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset )

(p.18)

• If the picture size is set to Screen Fit , change it to 16:9 (p. 17).

• Change cable/set top box resolution.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.

• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes.

• Set the output resolution of the cable box to 1080i or 720p.

First of all, please perform the Sound Test to confirm that your TV audio is properly operating.

(go to MENU - Support - Self Diagnosis - Sound Test ) (p. 23)

If the audio is OK, the sound problem may caused by the source or signal.

• Please check the volume the of external device connected to your TV.

There is no sound or the sound is too low at maximum volume.

The picture is good but there is no sound.

The speakers are making an inappropriate noise.

No Picture, No Video

The TV won’t turn on.

• Set the Speaker Select option to TV Speaker in the sound menu (p. 19).

• If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.

• If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).

• If you are using a DVI to HDMI cable, a separate audio cable is required.

• If your TV has a headphone jack, make sure there is nothing plugged into it.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.

The TV turns off automatically.

• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The remote control does not work” below.

• Ensure the Sleep Timer is set to Off in the Setup menu (p. 20).

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.

English

49


Other Information

Issues

There is no picture/Video.


• Check cable connections (remove and reconnect all cables connected to the TV and external devices).

• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connect to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

The picture is distorted: macro block error small block, dots, pixelization

• Make sure the Antenna cable is connected securely.

• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU -

Setup - Plug & Play (Initial setup) and wait for all available channels to be stored (p. 7).

• Verify the Antenna is positioned correctly.

• Compression of video contents may cause picture distortion, especially with fast moving pictures such as sports and action movies.

• A low signal can cause picture distortion. This is not a TV issue.

PC Connection

A “Mode Not Supported” message appears.

“PC” is always shown on the source list, even if a PC is not connected.

The video is OK but there is no audio.

• Set your PC’s output resolution and frequency so they match the resolutions supported by the TV

(p. 24).

• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.

• If you are using a HDMI connection, check the audio output setting on your PC.

Network Connection (Depending on Models)

Wireless network connection failed.

• Samsung Wireless USB dongle is required to use a wireless network.

• Make sure the Network Connection is set to Wireless (p. 27).

• Make sure the TV is be connected to a wireless IP sharer (router).

Others

The picture won’t display in full screen.

The remote control does not work.

The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.

A “Mode Not Supported” message appears.

• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.

• Adjust the picture size options on your external device or TV to full screen.

• Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code.

• Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings on page 24 of this manual.

There is a plastic smell from the TV.

The TV Signal Information is unavailable in the Self Diagnostic Test menu.

• This smell is normal and will dissipate over time.

• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 23).

50

English


Issues

The TV is tilted to the side.

There are difficulties assembling the stand base.

The channel menu is greyed out.

(unavailable)

Your settings are lost after 30 minutes or every time the TV is turned off.


• Remove the base stand from the TV and reassemble it.

• Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, use a magnetized screw driver.

• The Channel menu is only available when the TV source is selected.

You have intermittent loss of audio or video.

You see small particles when you look closely at the edge of the frame of the TV.

The PIP menu is not available.

The message “Scramble signal” or “Weak

Signal/No Signal” appears.

You turned the TV off 45 minutes ago, and it turned on again.

There are recurrent picture/sound issues.

A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture.

• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.

Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial setup) → ENTER E (p. 7).

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

• This is part of the product’s design and is not a defect.

• PIP functionality is only available when you are using a HDMI, PC or components source (p. 22).

• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.

• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.

• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV.

• Check and change the signal/source.

• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

[UC6000-XU]BN68-02748D-01Eng.indb 51

English

51

2010-04-01 오후 7:24:01

Other Information

¦

Licence

TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.

TheaterSound technology is incorporated under licence form SRS Lab s , Inc.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;

6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.

Product Includes software. © DTS, Inc. All Rights Reserved.

DivX Certified to play DivX video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.

com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content.

To generate the registration code, locate the DivX VOD section in the device setup menu.

Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673; 7,460,688; 7,519,274

Open Source Licence Notice

In the case of using open source software, Open Source Licences are available on the product menu.

Open Source Licence Notice is written only English.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,

USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

52

English


Specifications

Panel native

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

TV System

Colour/Video System

Sound System

HDMI IN 1 ~ 4

1920 x 1080 @ 60 Hz

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

Analogue: B/G, D/K, L, I (Depending on your country selection)

Digital: DVB-T/DVB-C/DVB-T2 (UK Only)

Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60

Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, [email protected], [email protected]

BG. OK NICAM. MPEGl

Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i

Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.

Analogue audio input (HDMI IN1 only)

PC input (HDMI IN1 only)

-20˚ ~ 20˚

UE32C6000 UE37C6000

Stand Swivel (Left / Right)

Model Name

Screen Size

(Diagonal)

Sound

(Output)

Dimensions (WxDxH)

Body

With stand

Weight

Without Stand

With Stand

32 inches

774 X 29.9 X 479 mm

774 X 242.2 X 542 mm

8.4 kg

10.2 kg

10 W X 2

37 inches

897 X 29.9 X 549 mm

897 X 257.2 X 614 mm

10.6 kg

13.3 kg

Model Name

Screen Size

(Diagonal)

Sound

(Output)

Dimensions (WxDxH)

Body

With stand

Weight

Without Stand

With Stand

UE40C6000

40 inches

961 X 29.9 X 585 mm

961 X 257.2 X 650 mm

12.4 kg

15.1 kg

10 W X 2

UE46C6000

46 inches

1096 X 29.9 X 659 mm

1096 X 277.2 X 724 mm

16.1 kg

20.8 kg

UE55C6000

55 inches

15 W X 2

1287 X 29.9 X 768 mm

1287 X 307.2 X 833 mm

20.2 kg

25.7 kg

✎

Design and specifications are subject to change without prior notice.

✎

For information about power supply, and more about power consumption, refer to the label attached to the product.

[UC6000-XU]BN68-02748D-01Eng.indb 53

English

53

2010-04-01 오후 7:24:02

Other Information

A

AllShare

Amplify

Antenna

Anynet+

Auto Adjustment

Auto Volume

B

Background Music

Balance L/R

Basic View

Batteries

Black Tone

Blanking Bracket

Brightness

C

Cable Tie

Change PIN

Channel Manager

Channel Menu

Clock

Colour Tone

Component

4, 45

21

12

Connecting to a PC 24

Connecting to an Audio Device 9

13

20

17

8

38

18

37

6

16

46

15

39

18

19

42

18

13

D

DIGITAL AUDIO OUT

DivX® VOD

D-sub

Dynamic

Dynamic Contrast

9, 39

38

24

15

16

E

Eco Sensor

Edit Name

Editing Channels

Energy Saving 15

EPG (Electronic Programme Guide) 11

Equalizer

External Speaker

18

19

15

10

14

Index

F

Film Mode

Fine Tune

Flesh Tone

Frequency

H

HDMI

Headphones

Home Theatre

I

Installation Space

L

Language

Licence

Lock

M

Media Play

Melody

Menu Transparency

Music

My Channels

N

Navigate

Network Connection

Network Setup

Now & Next guide

O

ON/OFF button

Optimal resolution

P

Photos

Picture Size

PIP (Picture in Picture)

Plug & Play

Power Indicator

8, 39

9

9, 39

2

36

17, 38

22

7

5

17

15

16

13

21

52

14

11

25

26

11

32

22

22

36

13

6

24

R

Receiver

Recording

Remote Control

Repeat Mode

RGB Only Mode

Rotate

S

Select All

Self Diagnosis

Sharpness

Signal Information

Sleep Timer

Slide Show

Software Upgrade

Source List

Speaker Select

Specifications

Standby mode

Subtitle

Symbol

T

Timer

Title

Tools

Troubleshooting

TV Speaker

U

USB Drive

Using Channel View

Using Scheduled View

Using the Favourite Channels

23, 32

11

12

13

20

37

3

49

19

38

16

38

41

40

6

36

23

10

19

14

23

15

23

20

53

5

21

3

V

VCR

Video Formats

Videos

Volume

W

Wall Mount

Warm

White Balance

8

35

34

5

46

17

16

54

English


Warning! Important Safety Instructions

Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). THERE ARE

NO USER SERVICEABLE PARTS INSIDE. REFER ALL

SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

y The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

– Do not cover the slots and openings with a cloth or other materials.

– Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.

– Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

– Give your product 10 cm (4 inch) clearance from the wall.

y Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

y Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the product.

y Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.

y Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.

y This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.

y Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

y Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.

y To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.

This will prevent damage to the set due to lightning and power line surges.

y Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

y Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

y To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

y Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.

y If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service centre.

y Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

– Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

y Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures,high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc.

Failure to do so may cause serious damage to your set.

y Use only a properly grounded plug and receptacle.

– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) y To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

y Do not allow children to hang onto the product.

y Store the accessories (battery, etc.) in a location safely out of the reach of children.

y Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.

y Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

WARNING - TO PREVENT THE SPREAD OF FIRE,

KEEP CANDLES OR OTHER OPEN FLAMES

AWAY FROM THIS PRODUCT AT ALL TIMES.


Wiring the Mains Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.

Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.

If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitably approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug.

Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

BLUE - NEUTRAL BROWN - LIVE

As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :

The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING:

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE

LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Warranty Card

UNITeD KINGDOM

This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our

Authorised Service Centres are available from:

Samsung Electronics U.K. Ltd.

Customer Care Centre

PO Box 17243

Edinburgh, EH11 4YB

United Kingdom

Tel: 0845 SAMSUNG (7267864) (UK & Northern Ireland)

Tel: 0818 717 100 (EIRE Only)

Fax: +44 0845 650 8080

Web : www.samsung.com

WARRANTY CONDITIONS

1.

The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.

2.

Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.

3.

Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.

4.

This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any country other than the one for which the product was originally designed and manufactured.


This page is intentionally left blank.


No results