Parcel Shipping Label Printer
©2022 FP Digital Business Solutions, GmbH
User Guide 1.0.0
All Rights Reserved
CONTENTS PRODUCT INTRODUCTION
Product Introduction ……………..................
1 What's in the box?
Quick Printer Installation ……………….….
2
Label Setup ………………………………...
3
Driver Installation ……………………….….
4
Windows Driver Installation ……………….
4
Mac Driver Installation ……………………..
10
FEED Button Instruction ………………......
12
LED Status ………………………………….
12
FAQs ………………………………………... 13
Specifications ………………………………. 15
Support ……………………………………... 15
1. Printer 2. Power cable 3. USB cable
4. Labels 5. Power adapter 6. User guide
1
QUICK PRINTER INSTALLATION LABEL SETUP
To connect your printer follow steps 1 - 6:
2
4
Power off
1
Power on
6
1 Facing the front of the printer, press the cover open button to open the top cover.
2 Load the label paper with the holders on both sides.
3 Finish the loading the labels, then close the cover.
4 After loading labels, perform a label size calibration.
5
Note: Please use the original power adapter provided by FP.
3
Note: Before using the printer to print labels, please calibrate the paper size.
L abel size calibration:
1 Turn on the printer
2 Press and hold the FEED button
3 Release the button when you hear one beep
4 The printer will then calibrate the label size
2 3
DRIVER INSTALLATION
www.FP-USA.com
located under Help Center > Digital solutions > MailOne
OR download directly inside Parcel Shipping application
My Parcel Shipping > Administration > Device Management
Warning:
Printer head (TPH) will be very hot after printing.
Please do n’t touch the printer head or parts around it.
WINDOWS DRIVER INSTALLATION
Note: Please connect to USB cable to the computer first and then turn on the printer.
1 Open the driver file you downloaded.
2 Follow the on-screen driver installation instructions:
4
5
6 7
8
3 Check the printer Page Setup in Printing preferences (4
” x 6” / 101.6mm x 152.4mm)
Note: If the USB interface cannot be recognized during the installation process, please restart the printer.
9
MAC DRIVER INSTALLATION
Note: Please connect the USB cable to the computer first and then turn on the printer.
1 Open the driver software you downloaded.
2 Start installation.
10
3 Follow the guideline to install until "The installation was successful" appears.
4 Page Setup, choose 4x6” (102x152 mm), then we can open the document and select the printer to print shipping labels.
11
FEED BUTTON INSTRUCTION FAQs
Printer status
Standby
Standby
Standby
Operation of FEED
Standby Short press the button(light)
Long press the button(light) until beep once
Long press the button(light) until beep twice
Long press the button(light) until beep five times
Function
Feed blank labels
Automatically calibrate paper size
Print a test page
Reset printer
Q1: When the printing is too faint, how do I adjust the density and printing speed?
A1 : For Windows: Printer Preferences → Options → Setting;
For Mac OS: Can be set in dropdown menu under ‘Printer
Features’
Q2: How do I clear paper jams and/or eliminate white spots in my printing?
A2: Turn off the printer, and allow the printer head to cool down. Use an alcohol to wipe the printer head clean .
LED STATUS
Description
Power on, waiting for printing instructions
The printer is downloading data or paused
LED indicator
Blue light
Blue light flashing
Q3: Why does it print extra blank labels after the one successful print?
A3: Please check if the paper size setting of the printer is correct, and adjust the scale and margins in preview page or page setup when you are printing from browser.
Q4: Why I am printing blank labels?
A4: Make sure your labels are ‘Direct Thermal’ labels and the label that you peel off should be facing up when it comes out of the printer. If it still does not work, reinstall the driver.
The printer is clearing data Purple light
Q5: How do I print a test label?
The cover is open Red light A5: A test label can be used to determine whether the machine is malfunctioning and whether the printing performance is good.
Printing errors, such as: out of paper, paper jam, or memory error, etc.
Red light flashing You can print a test label as follows.
1. Turn on the printer.
2. Press and hold the FEED button.
3. Release the button when you hear two beeps.
12 13
SPECIFICATIONS
Model
Method
Resolution
Max Printing Speed
Paper Width
Paper Thickness
Power Adapter
Printing Life
Connection
SUPPORT
For Technical Support, contact FP:
USA: www.fp-usa.com
UK: www.fpmailing.co.uk
14 15
PSL300U
Direct Thermal
300 DPI
106mm/s
104mm
0.06-0.25mm
24V/2.5A
TPH 30 Km
USB
