Kyoritsu Electrical Instruments Works KEW SNAP Series Instruction Manual

The Kyoritsu Electrical Instruments Works KEW SNAP Series is a digital clamp tester designed for AC leakage current measurement. It features a large, easy-to-read LCD display, a wide measuring range, and a data hold function for convenience. The device is designed to safety standard IEC 61010-2-032 and offers features like a sleep function to prevent unnecessary power consumption, a frequency selector button to filter out high frequency noise, and a dynamic range of 4000 counts full scale.

PDF
Document
Kyoritsu KEW SNAP Series Leakage Current Tester Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Digital clamp tester

  • AC leakage current measurement

  • Wide measuring range

  • Data hold function

  • Safety standard IEC 61010-2-032

  • Sleep function

  • Frequency selector button

  • Large LCD display

Frequently asked questions

Never exceed the maximum allowable input of any measurement range.

Clamp onto a grounded wire. The measured current value will be shown on the display.

Press the button to select between '50/60Hz' frequency response and 'WIDE' frequency response. The '50/60Hz' setting filters out high frequency noise, while 'WIDE' allows measurement of currents of fundamental frequencies as well as high frequencies.

Preparing document for printing…
0%