advertisement
ASSEMBLY AND
OPERATING INSTRUCTIONS
Art. No. DU-T40 max. 100 kg
~ 30 Min.
CM
49 kg
L 149 | W 68 | H 131
DUT40.01.08
TREADMILL T40
2 T40
Content
1 GENERAL INFORMATION
1.1 Technical Data
1.2 Personal Safety
1.3 Electrical Safety
1.4 Set-Up Place
2 ASSEMBLY 11
2.1 General Instructions
2.2 Scope of Delivery
2.3 Assembly
11
12
13
7
9
10
7
8
3 OPERATING INSTRUCTIONS
3.1 Console Display
3.2 Button Functions
3.3 Programmes
3.3.1 Quick-Start Programme
3.3.2 Target Programmes
3.3.3 Pre-set Profile Programmes
3.3.4 User-Defined Programmes
3.4 Body Fat Test
16
19
20
22
23
17
18
19
19
4 STORAGE AND TRANSPORT
4.1 General Instructions
4.2 Folding Mechanism
4.2.1 Folding Up the Treadmill
4.2.2 Unfolding the Treadmill
4.3 Transportation Wheels
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
5.2 Faults and Fault Diagnosis
5.3 Error Codes and Troubleshooting
5.4 Care and Maintenance
5.4.1 Adjusting the Running Mat
5.4.2 Re-tensioning the Running Mat
5.4.3 Lubricating the Running Mat
5.5 Maintenance and Inspection Calendar
6 DISPOSAL 31
24
24
24
25
25
26
27
27
27
28
29
29
30
30
31
3
7 RECOMMENDED ACCESSORIES 32
8 ORDERING SPARE PARTS
8.1 Serial Number and Model Name
8.2 Parts List
8.3 Exploded Drawing
9 WARRANTY 38
33
33
34
37
10 CONTACT 40
4 T40
Dear customer,
Thank you for choosing a Duke Fitness brand fitness equipment. Duke Fitness offers you fitness equipment that makes it easy to start exercising regularly, stay fit and lose weight.
We want to help you to achieve your fitness goals quickly and sustainably and hope that your new fitness equipment will help you to do so. Do not hesitate to contact us if you have any further questions about your training or fitness equipment, or if you would like to add more equipment to your existing fitness equipment. We wish you much of success!
Your Fitness Team from Sport-Tiedje and Duke Fitness
Further information can be found at www.sport-tiedje.com
Intended Use
The equipment may only be used for its intended purpose.
The equipment is only suitable for home use. The equipment is not suitable for semi-professional
(e.g. hospitals, associations, hotels, schools, etc.) and commercial or professional use (e.g. fitness studios).
Legal Notice
Sport-Tiedje GmbH
Europe’s No. 1 for home fitness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany
Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547
Disclaimer
©2019 Duke® is a registered brand of the company Sport Tiedje GmbH. All rights reserved. Any use of this trademark without the explicit written permission of Sport-
Tiedje is prohibited.
Product and manual are subject to change. Technical data can be changed without advance notice.
5
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance. In case of doubt, responsible persons must supervise the use of the equipment.
This equipment has been manufactured according to the latest safety knowledge.
As far as possible, potential safety hazards which could cause injury have been eliminated. Make sure to carefully follow the instructions and that all parts are securely in place. If required, read through the instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions.
The following safety instructions may appear in this manual:
࣑ ATTENTION
This notice indicates potentially hazardous situations which, if not avoided, may result in property damage.
⚠ CAUTION
This notice indicates potentially hazardous situations which, if not avoided, may result in slight or minor injuries!
⚠ WARNING
This notice indicates potentially hazardous situations which, if not avoided, may result in death or serious injuries!
⚠ DANGER
This notice indicates potentially hazardous situations which, if not avoided, will result in death or serious injuries!
L NOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts.
6 T40
1
GENERAL INFORMATION
1.1
Technical Data
LCD - Display of:
+ Training time in minutes
+ Speed in km/h
+ Training distance in km
+ Calories in kcal
+ Incline in %
+ Heart rate (when using the hand pulse sensors)
Motor type: DC Motor (1.75HP)
1–16
Handrail buttons (speed):
(speed):
2
3
0–10
Handrail buttons (incline):
(incline):
2
3
Programmes in total:
Quick-Start programmes:
Pre-set profile programmes:
1 programmes:
43
36
3
Weight and Dimensions
Article weight (gross, incl. packaging):
Article weight (net, excl. packaging):
Package dimensions (L x W x H) approx.:
Set-up dimensions (L x W x H) approx.:
Folding dimensions (L x W x H) approx.:
Maximum user weight:
57.5 kg
48.5 kg
168 cm x 75 cm x 50 cm
149 cm x 68 cm x 131 cm
94 cm x 68 cm x 131 cm
100 kg
7
1.2
Personal Safety
⚠ DANGER
+ Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. If you are under medical treatment that affects your heart rate, medical advice is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please also note that heart rate monitoring systems can be inaccurate. If you notice any signs of weakness, nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising immediately and seek advice from your doctor if necessary.
⚠ WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under strict observation when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ If your equipment provides a safety key, the clip of the safety key must be attached to your clothing before starting your training. In the event of a fall, the EMERGENCY STOP of the equipment can be initiated.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing. When wearing sports shoes, make sure they have suitable soles, preferably made of rubber or other nonslip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise barefoot.
⚠ CAUTION
+ If your equipment needs to be connected to the power supply with a mains cable, make sure that the cable is not a potential tripping hazard.
+ Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons.
࣑ ATTENTION
+ Do not insert any objects of any kind into the openings of the device.
8 T40
1.3
Electrical Safety
⚠ DANGER
+ In order to reduce the risk of an electric shock, always unplug the equipment from the mains socket immediately after your workout, before assembly or dismantling, and before maintenance or cleaning. Do not pull on the cable.
⚠ WARNING
+ Do not leave the equipment unattended while the mains cable is plugged into the mains socket. During your absence, the mains cable must be removed from the mains socket to prevent improper use by third parties or children.
+ If the mains cable or plug is damaged or defective, contact your contract partner. Until repair, the equipment must not be used.
࣑ ATTENTION
+ The equipment requires a mains connection of 220-230 V with 50 Hz mains voltage.
+ The equipment may only be connected directly to an earthed socket using the supplied mains cable. Extension cables must conform to VDE guidelines. Always completely unwind the mains cable.
+ The socket must be protected by a fuse with a minimum fuse rating of "16 A, slow blow".
+ Do not make any changes to the mains cable or the mains plug.
+ Keep the mains cable away from water, heat, oil and sharp edges. Do not route the mains cable underneath the equipment or under a carpet or rug, and do not place any objects on top of it.
+ If your purchased item is equipped with a TFT console, software updates must be carried out regularly. Follow the instructions on the console to perform the update(s).
+ The software systems on gym equipment with TFT consoles are set up only for the preinstalled apps. Do not install any additional apps.
L NOTICE
+ The pre-installed apps on TFT consoles are produced and provided by external manufacturers. Sport-Tiedje does not take any responsibility for the availability, functionality or contents of these apps.
9
1.4
Set-Up Place
⚠ WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠ CAUTION
+ The training room should be well ventilated during training and not be exposed to any draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be flat, loadable and solid.
࣑ ATTENTION
+ The device may only be used in one building, in sufficiently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A floor protective mat/equipment underlay can help to protect high-quality floor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight unevenness.
10 T40
2
ASSEMBLY
2.1
General Instructions
⚠ DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly.
⚠ WARNING
+ The treadmill is equipped with highpressure shock absorbers that can cause the treadmill to suddenly open if handled incorrectly. To avoid possible personal injuries, never pull on the areas of the treadmill shown in the illustration. Never try to lift or move the treadmill at the marked areas.
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries.
⚠ CAUTION
+ Do not open the packaging when it is lying on its side.
+ Ensure to have sufficient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek the help of a third technically skilled person.
࣑ ATTENTION
+ To prevent damage to the equipment and the floor, assemble the equipment on a mat or packaging board.
L NOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.
11
2.2
Scope of Delivery
⚠ WARNING
Around the treadmill there is a strap that prevents the treadmill from opening during transport.
This strap must be removed before assembly.
The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly.
⚠ CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.
Base frame with console unit
Safety Key Silicone oil
(M8×35×20)
2x
(M8×10)
4x
12 T40
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given.
L NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or download the PDF instructions stored in the webshop on your end device (e.g. smartphone, tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step1: Assemble the upright posts
࣑ ATTENTION
Pay attention to not pinch the cable during the next steps.
1. Set up the upright posts (3&4) slowly and evenly and align the screw holes.
2. Mount both upright posts (3&4) to the base frame (1) with a total of two bolts (7).
3. Tighten the bolts with the tool.
3
4
7
1
13
Step 2: Assemble the console unit
1. Set up the console unit (66).
2. Mount the console unit (66) to both upright posts (3&4) with a total of two bolts (7).
3. Tighten ths bolts with the tool.
4. Insert the safety key into the opening provided on the console unit.
4
3
66
7
Step 3: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the main frame.
⚠ WARNING
The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill to suddenly open if handled incorrectly. For more information, refer to the section 2.1 of this manual.
1. Lift the treadmill on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and to raise the running surface.
Down
Up
3. Rotate them counterclockwise in order to lower the running surface.
Step 4: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed that the equipment will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical safety.
14 T40
3
OPERATING INSTRUCTIONS
L NOTICE
Familiarise yourself with all the functions and setting options of the device before starting training. Have the proper use of this product explained to you by a specialist.
SAFETY KEY
⚠ WARNING
+ For your safety, the device is equipped with an EMERGENCY STOP function. The equipment can only be operated if the safety key is correctly attached to the contact point of the cockpit. If the safety key is no longer on the contact point, the equipment automatically stops. Therefore, the Safety Key cord with the clip must be attached to your clothing before every training session. If you want to quickly stop the treadmill, if you can no longer control the speed, or if another emergency occurs, remove the safety key from the cockpit using the cord.
+ To enable the safety key to detach from the contact point of the cockpit in the event of a fall, the safety key clip must be firmly attached to your clothing!
+ Make sure that the safety key is not accessible to children.
15
3.1
Console Display
TIME
DISTANCE (DIS)
INCLINE (INC)
CALORIES (CAL)
SPEED
PULSE (PUL)
+ Display of the training time in minutes
+ Display range: 0:00–99:59
+ Setting range: 5:00–99:00 (in steps of 1 min.)
+ Display of the training distance in km
+ Display range: 0.0–99.9
+ Setting range: 1.0–99.0 (in steps of 1.0 km)
+ Display of the incline
+ Display range: 0–10
+ Setting range: 0–10 (in steps of 1%)
+ Display of the calories in kcal
+ Display range: 0–999
+ Setting range: 20–990 (in steps of 10 kcal)
+ Display of the speed in km/h
+ Display range: 1–16 km/h
+ Setting range: 1–16 km/h (in steps of 0.1 km/h)
Display of the current heart rate when using the hand pulse sensors.
⚠ WARNING
Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid.
L NOTICE
The heart rate will be displayed on the incline display (INC) as soon as the hand pulse sensors are used.
16 T40
3.2
Button Functions
A
INCLINE
B C
D
E
A
B
C
Hotkeys
Incline
Incline +/-
MODE
D STOP
E START/PAUSE
F PROGRAM
G Speed +/-
H
Hotkeys
Speed
H G F
Hotkeys for setting the incline to 2, 4 or 8.
Buttons to adjust the incline in 1% steps.
L NOTICE
To adjust the incline during training, hold down the respective button for more than two seconds.
Button to select between the three target programmes:
+ Time
+ Distance
+ Calories
L NOTICE
The values for the target programmes can be adjusted by using the +/- keys for the speed.
Button to end the programme.
Button to start or pause the programme.
Button to select between the 36 pre-set profile programmes.
Buttons to adjust the speed in 0.1 steps.
L NOTICE
To adjust the speed during training, hold down the respective button for more than two seconds.
Hotkeys for setting the speed to 3, 6 or 9 km/h.
17
3.3
Programmes
The following programmes are available:
+ Quick-Start programmes:
+ Target programmes:
+ Pre-set profile programmes:
+ User-defined programmes:
1
3
36
3
3.3.1
Quick-Start Programme
1. To start the Quick-Start programme, press the START/PAUSE button.
The display counts down from 5 to 1, then a beep will sound and the programme will start.
L NOTICE
The dafault value for the speed is 1 km/h.
2. To adjust the speed or incline, use the respective buttons on the console or on the handrails.
3. Press the START/PAUSE button to pause the programme or the STOP button to end the programme.
3.3.2
Target Programmes
The target programmes can be used depending on the values of time, distance or calories.
1. To select one of the target programmes, press the MODE button.
L NOTICE
When you press the MODE button, the view changes in the order of Time → Distance → Calories.
The value for the selected programme flashes.
2. To adjust the value, use the +/- buttons for speed on the console or on the handrail.
3. To start the target programme, press the START/PAUSE button.
The display counts down from 5 to 1, then a beep will sound and the programme will start.
The value for the selected target programme counts down, the remaining values count up.
L NOTICE
You can adjust the incline and speed during training with the respective buttons on the console or on the handrails.
4. Press the START/PAUSE button to pause the programme or the STOP button to end the programme.
18 T40
3.3.3
Pre-set Profile Programmes
There are a total of 36 pre-set profile programmes available.
1. To select one of the pre-set profile programmes, press the PROGRAM button.
L NOTICE
When you press the PROGRAM button, the view changes in the order of P1–P36.
As soon as one of the programs is selected, the value for the time flashes.
2. To adjsut the value for time, use the +/- buttons for speed on the console or on the handrail.
3. To start the target programme, press the START/PAUSE button.
The display counts down from 5 to 1, then a beep will sound and the programme will start.
L NOTICE
You can adjust the incline and speed during training with the respective buttons on the console or on the handrails.
4. Press the START/PAUSE button to pause the programme or the STOP button to end the programme.
Section
Programme
SPEED
P1
INCLINE
SPEED
P2
INCLINE
SPEED
P3
INCLINE
SPEED
P4
INCLINE
SPEED
P5
INCLINE
P6
P7
P8
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
1
3.0
1
3.0
1
3.0
3
3
2.0
1
2.0
1.0
2
2.0
3
3.0
2
2
4.0
8
4.0
1
5.0
3
3
3.0
2
2.0
3.0
2
3.0
3
4.0
2
3
6.0
8
4.0
6
7.0
3
2
7.0
5
5.0
5.0
8
5.0
9
8.0
8
5
7.0
7
4.0
6
3.0
7
8
5.0
7
8.0
5.0
6
5.0
9
10.0
6
4
7.0
7
10.0
6
9.0
7
2
8.0
7
8.0
5.0
6
8.0
9
9.0
6
7
9.0
7
4.0
8
7.0
3
4
5.0
4
8.0
7.0
4
6.0
9
10.0
6
6
7.0
7
9.0
8
5.0
3
8
5.0
4
8.0
7.0
4
5.0
9
10.0
6
9 10
4
4.0
2
3.0
3.0
2
4.0
2
4.0
1
5.0
3
3.0
6
11.0
5.0
5 5
3.0
1
2.0
2
4
3.0
2
2.0
2.0
2
3.0
2
3.0
1
8
10.0
5
11.0
10
5.0
3
4
8.0
6
5.0
5.0
6
8.0
6
7.0
6
19
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
4.0
4
4.0
2
4.0
2
4
4.0
3
5.0
2
5.0
4
3.0
4
3.0
2
3.0
3
3.0
4
4
4.0
3
4.0
3.0
3
3.0
2
4.0
1
4.0
3
2.0
6.0
4
8.0
9
5.0
2
7
6.0
8
6.0
7
7.0
9
5.0
4
4.0
3
3.0
3
4.0
4
4
5.0
3
5.0
7.0
6
5.0
7
5.0
6
6.0
8
4.0
8
10.0
9
6.0
4
12.0
9
7.0
9
9.0
8
8.0
9
9.0
6
6.0
5
9.0
5
6.0
9
10
11.0
7
8.0
11.0
8
6.0
8
8.0
7
7.0
8
8.0
4.0
8
8.0
8
5.0
7
9
7.0
9
7.0
8
11.0
6
7.0
8
6.0
8
9.0
7
6.0
9
10
11.0
7
8.0
7.0
8
6.0
8
6.0
7
10.0
5
6.0
8
11.0
7
10.0
8
5.0
4
11.0
6
10.0
4
11.0
6
7.0
8
9.0
8
9.0
7
9.0
3
10
10.0
7
8.0
4.0
3
10.0
5
9.0
3
10.0
5
6.0
9
5.0
7
8.0
4
11.0
8
10.0
6
12.0
4
11.0
10
7.0
10
8.0
6
6.0
9
6.0
3
10
9.0
9
7.0
10.0
7
9.0
5
11.0
3
10.0
9
6.0
6
12.0
10
6.0
4
5.0
9
7.0
9
12.0
5
11.0
5
7.0
8
9.0
7
6.0
7
9.0
5
7
8.0
7
11.0
4.0
8
6.0
8
11.0
4
10.0
4
6.0
8.0
4
6.0
8
5.0
9
4
10.0
9
10.0
5
8.0
9
9.0
6
6.0
5
9.0
5
7.0
5
10
11.0
7
10.0
5.0
3
9.0
8
9.0
4
7.0
8
8.0
7
7.0
5
5.0
4
4
4.0
7
12.0
6.0
6 6
12.0
7.0
2
3.0
3
5 5
12.0
4.0
5
7.0
5
6.0
7
6.0
5
4.0
4
5.0
3
4.0
3
5.0
5
3
5.0
2
6.0
6
6.0
4
4.0
12.0
6.0
4 4
11.0
3.0
4 4
6.0
5.0
6
5.0
4
3.0
4.0
3
3.0
3
4.0
5
3
4.0
2
4.0
20 T40
P26
P27
P28
P29
P30
P31
P32
P33
P34
P35
P36
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
INCLINE
SPEED
5
5.0
4
6.0
3
6.0
5
3
5.0
3
5.0
5
5.0
4.0
5
4.0
3
4.0
5
5.0
4
5.0
8
7.0
9
7.0
8
8.0
10
10
6.0
3
7.0
5
9.0
5.0
5
5.0
4
4.0
5
6.0
4
6.0
7.0
4
9.0
7
7.0
10.0
4
10.0
9
10.0
7.0
10
7.0
9
10.0
7.0
10
7.0
6
10.0
8.0
6
7.0
6
10.0
10 10 10 10 10
10.0 11.0 12.0 12.0 12.0
10
8.0
8
9.0
8
9.0
8
9.0
8
8
9.0
8
11.0 12.0
10.0
6
10.0
8
7.0
10
6.0
8
9.0
5
12.0
9
12.0
8
11.0
9
6.0
9 5
11.0 12.0
7 7
12.0 11.0
5 5 9
12.0 12.0 12.0
11 7 7
10
8.0
10
8.0
9
6.0
8
5.0
9
9.0
9
11.0
10
7.0
5
12.0
9
6.0
10
9.0
5
7.0
7
12.0
12
7.0
5
6.0
10
8.0
5
11.0
10
8.0
10 10 10
10.0 11.0 12.0
9
9.0
10
6
9.0
10
6
12.0
6
6.0
6
6.0
4
5.0
4
6.0
3
7.0
5
5.0
8
3
4.0
4
12.0 7.0
7 7
12.0 8.0
6 6
12.0 5.0
6
8.0
6
7.0
8
8.0
6
8
7.0
6
5.0
6
5.0
4
4.0
4
5.0
3
5.0
21
3.3.4
User-Defined Programmes
There are a total of three user-defined programmes (U01–U03) available with each ten sections to be set.
1. To select one of the user-defined programmes, press the PROGRAM button.
L NOTICE
The user-defined programmes are placed in the sequence behind the preset programmes.
L NOTICE
If you have already created a user-defined programme, press the MODE button and set the time.
You can then press the START/PAUSE button to start the program.
2. Press the MODE button twice.
The value for speed flashes.
3. To adjust the value for the speed, use the +/- buttons for speed on the console or on the handrail.
4. To move the the next value to be set, press the MODE button.
L NOTICE
As soon as you press the MODE button, the entered value is automatically saved.
The value for incline flashes.
5. To adjust the value for the incline, use the +/- buttons for the incline on the console or on the handrai.
6. To move the the next section to be set, press the MODE button.
7. Repeat the steps 3 to 6 for all ten sections.
8. After setting the incline for the last section, press the MODE button again.
The value for time flashes.
9. To set the total time for the programme, use the +/- buttons for speed on the console or on the handrail.
10. To start the target programme, press the START/PAUSE button.
The display counts down from 5 to 1, then a beep will sound and the programme will start.
L NOTICE
After starting the programme, the programme is automatically saved and can immediately be started the next time when the total time is set.
11. Press the START/PAUSE button to pause the programme or the STOP button to end the programme.
22 T40
3.4
Body Fat Test
1. To select the body fat test (FAT), press the PROGRAM button.
L NOTICE
The body fat test is placed in the sequence behind the user-defined programmes.
2. Press the MODE button.
The display shows F1 and the value for the gender is shown on the right side of the display.
3. To select the gender (01 for Male, 02 for Female), use the +/- buttons for speed on the console or on the handrail.
4. To confirm, press the MODE button.
The display shows F2 and the value for the age is shown on the right side of the display.
5. To set the age, use the +/- buttons for speed on the console or on the handrail.
6. To confirm, press the MODE button.
The display shows F3 and the value for the height is shown on the right side of the display.
7. To set the height, use the +/- buttons for speed on the console or on the handrail.
8. To confirm, press the MODE button.
The display shows F4 and the value for the weight is shown on the right side of the display.
9. To set the weight, use the +/- buttons for speed on the console or on the handrail.
10. To confirm, press the MODE button.
The display shows F5.
11. To start the test, place your hands on the hand pulse sensors.
The display will show the result after about 8 seconds.
≤ 18
18 - 24
25 - 28
≥ 29
Underweight
Normal weight
Overweight
Obesity
23
4
STORAGE AND TRANSPORT
4.1
General Instructions
⚠ WARNING
+ The storage location should be chosen so that improper use by third parties or children can be prevented.
+ If your equipment does not have transportation wheels, the equipment must be disassembled before transportation.
࣑ ATTENTION
+ Make sure that the equipment is protected from moisture, dust and dirt in the selected storage location. The storage location should be dry and well ventilated and have a constant ambient temperature between 10°C and 35°C.
4.2
Folding Mechanism
⚠ WARNING
+ The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill to suddenly open if handled incorrectly. For more information, refer to the section 2.1 of this manual.
+ Do not lift the treadmill by the running mat or the rear transporting wheels. These parts do not lock and are difficult to grab.
L NOTICE
The treadmill is foldable and thus saves space when it is stored. It also makes it easier to transport.
24 T40
4.2.1
Folding Up the Treadmill
⚠ WARNING
+ Do not connect the equipment to the power supply when it is folded up. Try not to operate the equipment when it is folded up.
+ The running surface must have come to a complete stop before folding.
⚠ CAUTION
+ Do not lean on the equipment when it is folded and do not place anything on top of it that may make the equipment unstable or fall down.
࣑ ATTENTION
+ Make sure that nothing is standing next to or on top of the treadmill that can be spilled or thrown or that makes it impossible to fold the treadmill.
1. Turn off the on/off switch and remove the plug from the outlet.
2. Use both hands to grab the supportive bar directly under the rear part of the running mat so that you have a stable lifting point.
3. Make sure that the hydraulic brake is correctly locked and tilt the treadmill forward.
4. Make sure that you are standing safely and make sure that the locking mechanism is secure by pulling the equipment backwards and it does not move.
4.2.2
Unfolding the Treadmill
࣑ ATTENTION
+ Make sure that nothing is standing next to or on top of the treadmill that can be spilled or thrown or that makes it impossible to unfold the treadmill.
1. Stand behind the treadmill and push the device slightly forward towards the display.
2. To release the hydraulic brake lock, use your left foot to push the upper part of the hydraulic brake slightly forward until the lock releases and the treadmill can be pulled back.
3. Keep holding the treadmill.
The hydraulic brake lowers itself gently downwards.
4. Once the treadmill has lowered 2/3, you can let go of the treadmill.
25
4.3
Transportation Wheels
࣑ ATTENTION
If you want to transport your equipment over particularly sensitive and soft floor coverings, such as parquet, planks or laminate, lay out the transport route with cardboard or similar to avoid possible floor damage.
1. Stand behind the equipment and lift it until the weight is transferred to the transportation wheels. After that, you easily can move the equipment to a new position. For long transport distances the equipment should be disassembled and safely packed.
2. Select the new location by following the instructions in the section 1.4 of this manual.
26 T40
5
TROUBLESHOOTING, CARE AND MAINTENANCE
5.1
General Instructions
⚠ WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. The equipment must not be used until it has been repaired. If necessary, use only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here, additional service and/or repair work may be necessary; this must only be carried out by authorised service technicians.
5.2
Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an exchange is usually sufficient. Please refer to the following overview for the most common errors and how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault
Running mat grinds/ runs not straight
Running mag slips through/stops
Display shows nothing
No pulse displayed
Cause Solution
Running mat not centered
Tension/lubrication of running mat not correct
+
+
Safety Key missing
Power supply interrupted
Adjust the running mat according to the instructions
Check the tension/lubrication of the running mat according to the instructions
+ Insert Safety Key
+ Check if power switch is on
+ Check cable connections
+ Not enough contact to the sensors
+ Place your hands completely on the hand pulse sensors
+ Connection to the console lost
+ Check the cable connections
27
5.3
Error Codes and Troubleshooting
The electronics of the equipment continuously carries out tests. In case of deviations, an error code appears on the display and normal operation is stopped for your safety.
+ E-01 : Communication wire damaged/not connected, console, transformer or controller
damaged.
+ E-02 : Error in the connection between motor wire and controller. Defective motor wire, motor and/or controller possible.
+ E-03 : Error in the connection between photoelectric sensor and controller. Defective sensor and/or controller possible.
+ E-05 : Damaged controller or motor.
Please contact Sport-Tiedje for technical support.
28 T40
5.4
Care and Maintenance
The most important maintenance measure is the care of the running mat. This includes adjustment, re tensioning and lubrication of the running mat. Damage resulting from insufficient or neglected care is not covered by the warranty. You should therefore carry out maintenance checks at regular intervals. Be very careful when adjusting and tightening the running mat, as a strong over voltage or under voltage can cause damage to the equipment. The running mat is adjusted at the factory according to the regulations before delivery. However, it may happen that the running mat slips during transport.
5.4.1
Adjusting the Running Mat
During training, the running mat should run as centrally and straight as possible. The alignment of the running mat can change depending on the stress and load. Another reason can be the positioning of the equipment on an uneven surface.
⚠ CAUTION
During the following maintenance nobody must be on the treadmill!
1. Let the treadmill run at a speed of 5 km/h.
2. If the running mat deviates to the left, turn the left adjusting screw at the rear end of the device max. one ¼ turn clockwise and the right adjusting screw max. one ¼ turn anticlockwise.
3. If the running mat deviates to the right, turn the right adjusting screw at the rear end of the device max. ¼ turn clockwise and the left adjusting screw max. ¼ turn anticlockwise.
4. Then observe the mat for about 30 seconds, as the change is not immediately visible.
5. Repeat this procedure until the running mat is straight again. If the running mat cannot be adjusted, please contact your contract partner.
29
5.4.2
Re-tensioning the Running Mat
If the running mat slips over the rollers during operation (if this is the case, there is a noticeable jerk during running), the running mat must be re tightened.
In most cases, the slipping is caused by stretching of the mat through use. This is perfectly normal.
L NOTICE
Re-tensioning is carried out using the same adjusting screws that are used for adjustment.
1. Let the treadmill run at a speed of 5km/h.
2. Turn the left and right adjusting screws directly one after the other, max. one ¼ turn clockwise.
3. Then check whether the running mat continues to slip. If this is the case, you must perform the described procedure again.
5.4.3
Lubricating the Running Mat
If the running mat is not sufficiently lubricated, friction increases significantly and this leads to heavy wear of the endless belt, running plate, motor and circuit board. If you feel an increased friction of the running mat, this is an indication that you should lubricate the mat. However, lubrication should be carried out at least every 3 months or every 50 operating hours. Whichever case comes first.
L NOTICE
If your treadmill is equipped with a folding mechanism, you can also lubricate it when it is folded.
1. Raise the running mat slightly.
2. Apply some silicone oil or silicone spray to the entire deck and distribute evenly.
3. Continue turning the belt by hand so that the entire surface between the endless belt and the running plate is lubricated.
4. Wipe off the excess silicone oil or silicone spray.
L NOTICE
This maintenance must also be carried out after prolonged non-use of the equipment.
30 T40
5.5
Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session.
The following routine tasks must be performed at the specified intervals:
Part
Display console
Tension of the running mat
Lubrication of the running mat
Plastic covers
Screws and cable connections
Legend: C = clean; I = inspect
Weekly
C
C
Monthly
I
Quarterly
I
I
I
Half-yearly Yearly
I
By scanning the QR code with the camera function or QR code scanner app of your smartphone/tablet, a video on general maintenance of a treadmill opens on
YouTube. The video serves to illustrate the maintenance points described in this manual.
Please note that the video may not be available in your language or with appropriate subtitles.
If you cannot scan QR codes, you can access all Sport-Tiedje videos on YouTube by first opening
YouTube and entering “Sport-Tiedje” in the search field.
6
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment.
31
7
RECOMMENDED ACCESSORIES
To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. For treadmills this could be for example a floor mat , which makes your fitness equipment stand more securely and also protects the floor from sweat or silicone spray to keep moving parts in good shape and lubricate the running mat. Furthermore
,there are additional handrails available for some treadmills.
If you have purchased a fitness machine with pulse training and want to train your heart rate, we strongly recommend that you use a compatible chest strap, as this ensures optimum transmission of the heart rate.
Our range of accessories offers the highest quality and makes training even better. If you would like to find out more about compatible accessories, please go to the detail page of the product in our webshop (the easiest way is to enter the article number in the search field above) and go to the recommended accessories on this page. Alternatively, you can use the QR code provided. Of course, you can also contact our customer service: by telephone, e-mail, in one of our branches or via our social media channels. We will be happy to advise you!
floor mat towels chest strap silicone spray chest strap contact gel
32 T40
8
ORDERING SPARE PARTS
8.1
Serial Number and Model Name
In order to provide you with the best possible service, please have the model name, article number, serial number, exploded drawing and parts list ready. The corresponding contact options can be found in chapter 10 of this operating manual.
L NOTICE
The serial number of your equipment is unique. It's located on a white sticker.
The exact position of this sticker is shown in the following illustration.
Enter the serial number in the appropriate field.
Serial number:
Brand / Category:
Duke Fitness / treadmill
Model Name:
T40
Article Number:
DU-T40
33
8.2
Parts List
No.
Name
1 Base frame
28
29
30
25
26
27
31
32
33
18
19
20
15
16
17
21
22
23
24
11
12
13
14
7
8
9
4
5
6
2
3
Platform frame
Upright post(L)
Upright post(R)
Console frame
Ezfit linking parts
Hexagonal large flat head full tooth boltM8×10
Cover fixed tube painting part painting parts for lifting frame
Allen C.K.S. half thread screw M10×25×15
Hexagon socket head bolt M8×75
Allen C.K.S. half thread screw M10×35×20
Cross recessed countersunk head tapping screw ST4×40
Hexagon socket head bolt M8×25
Cross recessed countersunk head tapping screw ST3×10
Hexagon socket flush head half stud M8×40×20
Hexagonal large flat head half bolt M8×50×20
Hexagonal large flat head half bolt M8×30×20
Hexagon socket head bolt M6×55×Φ16
Cross recessed large flat head bolt M5×10
Cross recessed large flat head bolt M4×10 sharpnel
Hexagonal large flat head half bolt M10×45×16
Hexagon lock nut M10
Cross recessed countersunk head tapping screw ST4×15
Magnetic ring
Flat washerΦ8
Plastic flat pad Φ18×Φ10.5×t2.0
Plastic flat pad (PVC)Φ12×Φ6×t1.0
Spring washer Φ8
Spring washer Φ5
Flat washer Φ8
34
1
2
6
3
8
1
2
3
8
1
1
6
2
2
4
1
1
2
3
3
2
2
2
4
1
1
1
1
1
1
1
Qty.
1
T40
49
50
51
52
53
44
45
46
47
48
39
40
41
42
43
34
35
36
37
38
62
63
64
65
59
60
61
66
67
54
55
56
57
58 cylinder
Motor
Running board
Running belt
Motor belt
Motor cover
Rear cover
Side rail
Square cushion
Conical foot pad
Panel iPad tray console
Wheels
External serrated lock washer Φ5
Hexagon lock nut M8 communication wire communication wire communication wire
Photoelectric sensor L-300
Handle pulse set
Incline handle pulse set
Handle pulse communication wire
Controller
Safety key
Power connection wire
Power connection wire
Rocker switch
Self-reset switch
Power connection wire
Cable guider
Power cord
Front roller
Rear roller
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
3
8
1
1
1
6
4
1
1
1
2
1
1
2
1
1
1
1
1
35
68
69
70
71
72
73
74
Circular strip guide
Double pipe plug
Pipe strip
Incline motor
Incline axle sleeve
Wheel
Cross large flat head tapping screw ST4×12
2
1
8
6
1
2
18
36 T40
Exploding drawing
8.3
Exploded Drawing
46
45
49
50
48
47
26 6
40
14
41
14
62
74
44
66
3
7
3
17
7
17
17
17
37
9
WARRANTY
Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline.
Error Descriptions
Your fitness equipment is developed for long-term, high-quality training. However, should a problem arise, please first read the operating instructions. For further assistance, please contact your contract partner or call our service hotline. To ensure your problem is solved as quickly as possible, please describe the defect as exactly as possible.
In addition to the statutory warranty, we provide a warranty for every fitness equipment purchased from us according to the following provisions.
Your statutory rights are not affected.
Warrantee
The warrantee is the first/original buyer and/or any person who received a newly purchased product as a gift from the original buyer.
Warranty period
The warranty periods, shown on our web shop, begin on delivery of the fitness equipment. The respective warranty periods for your equipment can be found on its product website.
Repair Costs
According to our choice, there will either be a repair, a replacement of individual damaged parts or a complete replacement. Spare parts, that have to be mounted while assembling the equipment, have to be replaced by the warrantee personally and are not a part of repair. After the expiration of the warranty period for repair costs, a pure parts warranty applies, which does not include the repair, installation and delivery costs.
The terms of use are defined as follows:
+ Home use: solely for private use in private households up to 3 hours per day
+ Semi-professional use: up to 6 hours per day (e. g. rehabilitation centres, hotels, clubs, company gyms)
+ Professional use: more than 6 hours per day (e. g. commercial gyms)
Warranty Service
Within the warranty period, equipment which develops faults as a result of material or manufacturing defects, will be repaired or replaced at our discretion. Ownership of equipment or parts of equipment which have been replaced is transferred to us. The warranty period is not extended nor does a new warranty period begin following repair or replacement under the warranty.
38 T40
Warranty Conditions
For the warranty to be valid, the following steps must be taken:
Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance. If the fault is covered by our warranty, you will receive a new or repaired equipment in return.
Warranty claims are invalid in case of damage resulting from:
+ misuse or improper handling
+ environmental influences (moisture, heat, electrical surge, dust, etc.)
+ failure to follow the current safety measures for the equipment
+ failure to follow the operating instructions
+ use of force (e. g. hitting, kicking, falling)
+ interventions which were not carried out by one of our authorized service centres
+ unauthorised repair attempts
Proof of Purchase and Serial Number
Please make sure that you are able to provide the appropriate receipt when claiming on your warranty. So that we can clearly identify the model of your equipment, and for the purposes of our quality control, you will need to give the serial number of your equipment, when contacting the service team. Where possible please have your serial number and your customer number ready when you call our service hotline. It will help us to deal with your request swiftly.
If you cannot find the serial number on your fitness equipment, our service team is at your disposal to offer further information.
Service outside of the Warranty Period
We are also happy to issue an individual cost estimate if there is a problem with your fitness equipment after the warranty has expired, or in cases which do not fall under the terms of the warranty, e. g. normal wear and tear. Please contact our customer service team to find a quick and cost-effective solution to your problem. In such a case you will be responsible for the delivery costs.
Communication
Many problems can be solved just by speaking to us as your specialist supplier. We know how important it is to you as a user of the fitness equipment to have problems solved quickly and simply, so you can enjoy working out with minimal interruption. For that reason, we also want to resolve your queries quickly and in a straightforward manner. Thus, please always keep your customer number and the serial number of the faulty equipment handy.
39
10
CONTACT
DE
TECHNIK
📞 +49 4621 4210-900
📠 +49 4621 4210-698
🕒 Öffnungszeiten entnehmen Sie unserer Homepage.
SERVICE
📞 0800 20 20277
(kostenlos)
🕒 Öffnungszeiten entnehmen Sie unserer Homepage.
DK
TEKNIK OG SERVICE
📞 80 90 16 50
+49 4621 4210-945
🕒 Åbningstider kan findes på hjemmesiden.
PL
TECHNIKA I SERWIS
📞 22 307 43 21
+49 4621 42 10-948
🕒 Godziny otwarcia można znaleźć na stronie głównej.
FR
TECHNIQUE & SERVICE
📞 +33 (0) 172 770033
+49 4621 4210-933
🕒 Vous trouverez les heures d’ouverture sur notre site
Internet.
BE
TECHNIQUE & SERVICE
📞 02 732 46 77
+49 4621 42 10-932
🕒 Vous trouverez les heures d’ouverture sur notre site
Internet.
UK
TECHNICAL SUPPORT
📞 +44 141 876 3986
SERVICE
📞 +44 141 876 3972
🕒 You can find the opening hours on our homepage.
NL
TECHNISCHE DIENST & SERVICE
📞 +31 172 619961
🕒 De openingstijden vindt u op onze homepage.
INT
TECHNICAL SUPPORT & SERVICE
📞 +49 4621 4210-944
🕒 You can find the opening hours on our homepage.
AT
TECHNIK & SERVICE
📞 0800 20 20277
(Freecall)
+49 4621 42 10-0
🕒 Öffnungszeiten entnehmen
Sie unserer Homepage.
CH
TECHNIK & SERVICE
📞 0800 202 027
+49 4621 42 10-0
🕒 Öffnungszeiten entnehmen
Sie unserer Homepage.
Please find a detailed overview including address and opening hours for all stores of the Sport-Tiedje
Group in Germany and abroad on the following website:
www.sport-tiedje.com/en/stores
40 T40
WEBSHOP AND SOCIAL MEDIA
Sport-Tiedje is Europe’s largest specialist store for home fitness equipment with currently over
70 stores and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 web shops in the respective national language or have their desired equpiment assembled on site. In addition, the company supplies fitness studios, hotels, sports clubs, companies and physio practices with professional equipment for endurance and strength training.
Sport-Tiedje offers a wide range of fitness equipment from renowned manufacturers, high-quality in-house developments and comprehensive services, such as a build-up service and sports scientific advice before and after the purchase. The company employs numerous sports scientists, fitness trainers and competitive athletes.
Visit us also on our social media platforms or our blog!
www.sport-tiedje.co.uk www.sport-tiedje.de/blog www.facebook.com/SportTiedje www.instagram.com/sporttiedje www.youtube.com/user/sporttiedje
41
Notes
42 T40
43
TREADMILL T40
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement