advertisement
Assembly and Operating Instructions
Transporation Wheel
TF-RUN-X-2 max. 150 kg
~ 30 - 60 Min.
CM
128 kg
L 172 | W 81 | H 157
TFRUNX.02.06
Treadmill
RUN X
2
RUN X
RUN X
Content
1 GENERAL INFORMATION
1.1 Technical Data
1.2 Personal Safety
1.3 Set-Up Place
2 ASSEMBLY 10
2.1 General Instructions
2.2 Scope of Delivery
2.3 Assembly
10
11
13
3 OPERATING INSTRUCTIONS
3.1 Console Display
3.2 Button Functions
3.3 Battery Compartment
3.4 First Steps
3.5 Pause programme - Pause mode
3.6 End programme - stop mode
3.7 Programmes
3.7.1 Quick Start Programme
3.7.2 Interval 10/20 und Interval 20/10
3.7.3 Interval Custom
3.7.4 Target Time, Target Distance and Target Calories
3.7.5 Target HR
16
20
21
21
22
19
20
20
16
17
18
18
19
4 STORAGE AND TRANSPORT
4.1 General Instructions
4.2 Transportation Wheels
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
5.2 Faults and Fault Diagnosis
5.3 Maintenance and Inspection Calendar
6 DISPOSAL 25
23
23
23
24
24
24
25
7
7
8
9
7 RECOMMENDED ACCESSORIES 26
3
8 ORDERING SPARE PARTS
8.1 Serial Number and Model Name
8.2 Parts List
8.3 Exploded Drawing_
9 WARRANTY 31
27
27
28
30
10 CONTACT 33
4
RUN X
RUN X
Dear customer,
Thank you for choosing a high-quality equipment of the brand Taurus®. Taurus® offers sports and fitness equipment for the sophisticated home sport and the equipment of fitness studios and business customers. With Taurus® fitness equipment, the focus is on what sport is all about: maximum performance! Therefore, the equipment is developed in close consultation with athletes and sports scientists. Because athletes know best what makes perfect fitness equipment.
Further information can be found at www.sport-tiedje.com.
Intended Use
The equipment may only be used for its intended purpose.
This fitness equipment is suitable for home use, semi-professional use and commercial or professional use. The semi-professional sector includes, for example, institutional facilities such as hospitals, schools, hotels and associations. Professional use refers to commercial use, e.g. in a fitness studio.
Legal Notice
Sport-Tiedje GmbH
Europe’s No. 1 for home fitness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany
Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547
Disclaimer
©2008 Taurus® is a registered brand of the company Sport Tiedje GmbH. All rights reserved. Any use of this trademark without the explicit written permission of Sport-
Tiedje is prohibited.
Product and manual are subject to change. Technical data can be changed without advance notice.
5
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance. In case of doubt, responsible persons must supervise the use of the equipment.
Due to ongoing changes and software optimisations, the manual may have to be updated. If you notice any discrepancies during assembly or use, please refer to the manual uploaded to the webshop. The latest manual is always available there.
This equipment has been manufactured according to the latest safety knowledge. As far as possible, potential safety hazards which could cause injury have been eliminated. Make sure to carefully follow the instructions and that all parts are securely in place. If required, read through the instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here. The contract partner cannot be held liable for damage to health, accidents or damage to the equipment when it is not used in accordance with these instructions.
The following safety instructions may appear in this manual:
࣑ ATTENTION
This notice indicates potentially hazardous situations which, if not avoided, may result in property damage.
⚠ CAUTION
This notice indicates potentially hazardous situations which, if not avoided, may result in slight or minor injuries!
⚠ WARNING
This notice indicates potentially hazardous situations which, if not avoided, may result in death or serious injuries!
⚠ DANGER
This notice indicates potentially hazardous situations which, if not avoided, will result in death or serious injuries!
L NOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts.
6
RUN X
RUN X
1
GENERAL INFORMATION
1.1
Technical Data
LCD - display of:
+ Time
+ Speed
+ Distance
+ Calories
+
+ Watt
+
Heart rate (when using a chest strap)
Pace
Training programmes overall:
Quick Start Programme:
Interval programmes:
Target
Heart rate controlled programmes:
8
1 programmes:
3 (1 customized)
3
1
Weight and dimensions:
Article weight (gross, incl. packaging): 149 kg
Article weight (net, excl. packaging): 128 kg
Package dimensions (LxWxH) approx.: 189 cm x 88 cm x 45.5 cm
Set-up dimensions (LxWxH) approx.: 172 cm x 81 cm x 157 cm
Maximum user weight: 150 kg
7
1.2
Personal Safety
⚠ DANGER
+ Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. If you are under medical treatment that affects your heart rate, medical advice is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please also note that heart rate monitoring systems can be inaccurate. If you notice any signs of weakness, nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising immediately and seek advice from your doctor if necessary.
⚠ WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under strict observation when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ If your equipment provides a safety key, the clip of the safety key must be attached to your clothing before starting your training. In the event of a fall, the EMERGENCY STOP of the equipment can be initiated.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing. When wearing sports shoes, make sure they have suitable soles, preferably made of rubber or other nonslip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise barefoot.
⚠ CAUTION
+ If your equipment needs to be connected to the power supply with a mains cable, make sure that the cable is not a potential tripping hazard.
+ Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons.
࣑ ATTENTION
+ Do not insert any objects of any kind into the openings of the device.
8
RUN X
RUN X
1.3
Set-Up Place
⚠ WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠ CAUTION
+ The training room should be well ventilated during training and not be exposed to any draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be flat, loadable and solid.
࣑ ATTENTION
+ The device may only be used in one building, in sufficiently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A floor protective mat/equipment underlay can help to protect high-quality floor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight unevenness.
9
2
ASSEMBLY
2.1
General Instructions
⚠ DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly.
⚠ WARNING
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries.
⚠ CAUTION
+ Do not open the packaging when it is lying on its side.
+ Ensure to have sufficient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek the help of a third technically skilled person.
࣑ ATTENTION
+ To prevent damage to the equipment and the floor, assemble the equipment on a mat or packaging board.
L NOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.
10
RUN X
2.2
Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly.
⚠ CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.
RUN X
Bottle holder
11
Philips Pan head full thread screw M4*16
12
RUN X
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given.
L NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or download the PDF instructions stored in the webshop on your end device (e.g. smartphone, tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Mounting the console
1. Connect the cable of the console (55) with the corresponding counterpart of the console frame
(4).
࣑ ATTENTION
Be careful not to pinch the cables in the following step.
2. Fasten the console (55) to the console frame (4) with four M5*10 screws (83).
RUN X
Step 2: Mounting the Console Masts
1. Connect the cables of the right upright post (2) with the cables of the main frame (1).
࣑ ATTENTION
Be careful not to pinch the cables in the following step.
2. Fix the two upright posts (2 & 3) to the main frame (1) with four
M8*55*20 bolts (78) each.
13
Step 3: Assembly of the handrails
Attach one handrail (6 & 105) to each of the two upright posts (2 & 3) with two M8*45 bolts (101) and one M8*15 bolt (66) each.
Step 4: Mounting the Console Unit
1. Connect the two cables of the right upright post (2) to their corresponding counterparts of the console frame.
࣑ ATTENTION
Be careful not to pinch the cables in the following step.
2. Fix the console frame (4) to the two upright posts (2 & 3) with two M8*25 bolts (79) and two
Ø8.5xR25xt2.0 curve washers each.
Step 5: Mounting the Covers
1. Fasten the covers (7 & 8) to the main frame (1) with two ST4*16 screws (97) each.
2. Finally, tighten all screws.
14
RUN X
Step 6: Assembly of the bottle holder
Attach the bottle holder (110) to the left upright post (2) with two M4*16 screws (111).
Step 7: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by turning the setting screws under the main frame.
1. Lift the treadmill on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and to raise the running surface.
3. Rotate them counterclockwise in order to lower the running surface.
RUN X
Transporation Wheel
15
3
OPERATING INSTRUCTIONS
L NOTICE
+ Familiarise yourself with all the functions and setting options of the device before starting training. Have the proper use of this product explained to you by a specialist.
+ Bitte bedenken Sie, dass die Geräuschemission unter Belastung höher ist als ohne Last.
3.1
Console Display
16
RUN X
RUN X
Display
TIME
DISTANCE
CALROIES
PULSE
WATT
SPEED
PACE
LOAD
Description
+ Display of the training time
+ Display range: 00:00-1:59:00
+ Setting range: 1:00-1:59:00
+ Display of the training distance
+ Display range: 0.5-100
+ Setting range: 0,5-100
+ Display of calories burned
+ Display range: 0-2000
+ Setting range: 1-2000
+ Heart rate display (when using a chest strap)
+ Display range: 30-230
+ Setting range: 30-230
+ Display of watt
+ Display of speed
+ Display of pace
+ Display of the resistance level within the watt display
3.2
Button Functions
Button
START/PAUSE
STOP
DOWN
UP
10/20 INTERVAL
20/10 INTERVAL
CUSTOM INTERVAL
TARGET TIME
TARGET DISTANCE
TARGET CALORIES
TARGET HEART RATE
ENTER
Description
+ Start or pause the training
+ Continue the training
+ Stop the training
+ 2 Sek. gedrückt halten, um Konsole neuzustarten
+ Decrease values
+ Increase values
+ Quick-keys for the interval programmes:
+ 10/20
+ 20/10
+ Custom
+ Quick-keys for the target programmes:
+ Time
+
+ Calories
+
Distance
Heart Rate
+ Confirm the settings
+ Confirm the selection
17
3.3
Battery Compartment
The console is powered by two AA 1.5V batteries. In case the console is not working properly, the batteries might be running low. Follow the instructions to exchange the batteries.
1. Open the battery compartment cover and remove the batteries.
2. Insert two new AA 1.5V batteries and close the cover again.
3.4
First Steps
As soon as the console is switched on, the display lights up completely (Fig. 1) and a long signal sounds. The console then enters Standby mode and the symbols for Interval 10/20, Interval 20/10,
DISTANCE Target Program and PULSE (heart rate) are displayed in sequence (fig. 2-5).
L NOTICE
If the console does not receive any input or signal within four minutes, the console will enter sleep mode.
18
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
RUN X
RUN X
3.5
Pause programme - Pause mode
1. To pause the programme, press the START/PAUSE button once during the workout.
During the pause mode, the workout data is shown with a “P” on the display (Fig. 6) and a beep sounds for
0.5 seconds every 30 seconds.
L NOTICE
If the console does not receive any input within 5 minutes while in pause mode, the console goes into standby mode.
2. To resume, press the START/PAUSE key again.
Fig. 6
3.6
End programme - stop mode
To end the programme, press the STOP button once.
+ While pressing, a signal sounds for 0.5 seconds and the console enters stop mode.
After 0.5 seconds, the display will first show the DISTANCE, TIME and CALORIES values of the training session (Fig. 7).
+ After 7 seconds a short beep sounds and the maximum values of the training session for WATT,
SPEED and PULSE are shown on the display (fig. 8).
+ After 7 seconds a short beep sounds and the average values of the training session for WATT,
SPEED and PACE are shown on the display (fig. 9).
L NOTICE
The values are displayed three times in total, after which the console goes into standby mode.
Fig. 7 Fig. 8 Fig. 9
19
3.7
Programmes
A total of eight programmes are available:
+
+
+ Target programs:
+
Quick Start Program:
Interval 3
Heart rate controlled program:
1
3
1
3.7.1
Quick Start Programme
⚠ WARNING
Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid.
L NOTICE
Heart rate measurement is only possible with a compatible chest strap.
1. To start the Quick Start programme, start exercising in standby mode and press the START/
PAUSE button.
2. To pause the programme, press the START/PAUSE button once.
3. To resume the programme, press the START/PAUSE button again.
4. To end the programme, press the STOP button.
3.7.2
Interval 10/20 und Interval 20/10
Two preset programmes are available. These programmes are divided into 8 cycles. You can choose between 10/20 or 20/10 (WORK/REST).
⚠ WARNING
Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid.
L NOTICE
Heart rate measurement is only possible with a compatible chest strap.
1. To start a preset interval training, press the respective button and confirm with the ENTER button.
A countdown counts down from 3 to 0 and the first interval starts.
The respective interval time is counted down, all other values are counted up.
When an interval (WORK/REST) is completed, one cycle is added to the display.
2. To pause the programme, press the START/PAUSE button once.
3. To resume the programme, press the START/PAUSE button again.
4. To end the programme, press the STOP button or finish the training.
20
RUN X
RUN X
3.7.3
Interval Custom
⚠ WARNING
Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid.
L NOTICE
Heart rate measurement is only possible with a compatible chest strap.
1. To select the custom interval programme, press the respective button.
2. To set the number of cycles (1-20), press the UP or DOWN buttons and confirm with the ENTER button.
3. To set the time for the WORK sequence (0:05-30:00), press the UP or DOWN buttons and confirm with the ENTER button.
4. To set the time for the REST sequence (0:05-30:00), press the UP or DOWN buttons and confirm with the ENTER button.
A countdown counts down from 3 to 0 and the first interval starts.
The respective interval time is counted down, all other values are counted up.
When an interval (WORK/REST) is completed, one cycle is added to the display.
5. To pause the programme, press the START/PAUSE button once.
6. To resume the programme, press the START/PAUSE button again.
7. To end the programme, press the STOP button or finish the training.
3.7.4
Target Time, Target Distance and Target Calories
1. To select one of the target programmes, press the respective buttong
2. To set the target value, press the UP or DOWN button and confirm with ENTER.
The target programme starts.
The set value is counted down, all other values are counted up.
3. To pause the programme, press the START/PAUSE button once.
4. To resume the programme, press the START/PAUSE button again.
5. To end the programme, press the STOP button or finish the training.
21
3.7.5
Target HR
⚠ WARNING
Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. The heart rate measurement serves only as a training aid.
L NOTICE
Heart rate measurement is only possible with a compatible chest strap.
1. To select the heart rate programme, press the respective button.
2. To set your age (11-99), press the UP or DOWN button and confirm with the ENTER button.
3. Select either 65%, 85% or your own target heart rate with the UP or DOWN buttons and confirm with the ENTER button.
3.1. If you want to set your own target heart rate, adjust the target heart rate with the UP or DOWN buttons and confirm with the ENTER button.
4. To pause the programme, press the START/PAUSE button once.
5. To resume the programme, press the START/PAUSE button again.
6. To end the programme, press the STOP button or finish the training.
L NOTICE
+ If your heart rate deviates by more than 10% from the set value, an arrow symbol in the display indicates that you should adjust your heart rate.
+ If your heart rate matches or exceeds the set value, you will hear three beeps every second. If your heart rate has not decreased after 10 repetitions, a beep will sound for one second and the console will go into standby mode.
+ If no heart rate signal is received after 30 seconds, a signal will sound for one second and the console will go into standby mode.
22
RUN X
RUN X
4
STORAGE AND TRANSPORT
4.1
General Instructions
⚠ WARNING
+ The storage location should be chosen so that improper use by third parties or children can be prevented.
+ If your equipment does not have transportation wheels, the equipment must be disassembled before transportation.
࣑ ATTENTION
+ Make sure that the equipment is protected from moisture, dust and dirt in the selected storage location. The storage location should be dry and well ventilated and have a constant ambient temperature between 10°C and 35°C.
4.2
Transportation Wheels
࣑ ATTENTION
If you want to transport your equipment over particularly sensitive and soft floor coverings, such as parquet, planks or laminate, lay out the transport route with cardboard or similar to avoid possible floor damage.
1. Stand behind the equipment and lift it until the weight is transferred to the transportation wheels.
After that, you easily can move the equipment to a new position. For long transport distances the equipment should be disassembled and safely packed.
2. Select the new location by following the instructions in the section 1.3 of this manual.
23
5
TROUBLESHOOTING, CARE AND MAINTENANCE
5.1
General Instructions
⚠ WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. The equipment must not be used until it has been repaired. If necessary, use only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here, additional service and/or repair work may be necessary; this must only be carried out by authorised service technicians.
5.2
Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an exchange is usually sufficient. Please refer to the following overview for the most common errors and how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault
Display is blank/is not working
No pulse display
Cause Solution
+ Interrupted power connection
+ Loose cabel connections
+ Check cable connections
+ Sources of interference in the room
+ unsuitable chest strap
+ Wrong position of chest strap
+ Chest strap defective or battery empty
+ Pulse display defective
+ Eliminate sources of interference
(e.g. mobile phone, WLAN, lawn mower and vacuum cleaner robot, etc. ...)
+ Use a suitable chest strap (see
RECOMMENDED ACCESSORIES).
+ Reposition chest strap and/or moisten electrodes
+ Changing batteries
+ Check if pulse display by hand pulse possible
24
RUN X
5.3
Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session.
The following routine tasks must be performed at the specified intervals:
Part
Display console
Plastic covers
Screws and cable connections
Legend: C = clean; I = inspect
Weekly
C
C
Monthly
I
I
Quarterly
I
RUN X
6
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an recycling centre. Further information can be obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment.
25
7
RECOMMENDED ACCESSORIES
To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. For treadmills this could for example be a floor mat , which makes your fitness equipment stand more securely and also protects the floor from sweat or silicone spray to keep moving parts in good shape and lubricate the running mat. Furthermore, there are additional handrails available for some treadmills.
If you have purchased a fitness machine with pulse training and want to train your heart rate, we strongly recommend that you use a compatible chest strap, as this ensures optimum transmission of the heart rate.
Our range of accessories offers the highest quality and makes training even better. If you would like to find out more about compatible accessories, please go to the detail page of the product in our webshop (the easiest way is to enter the article number in the search field above) and go to the recommended accessories on this page. Alternatively, you can use the QR code provided.
Of course, you can also contact our customer service: by telephone, e-mail, in one of our branches or via our social media channels. We will be happy to advise you!
26 floor mat towels chest strap silicone spray chest strap contact gel
RUN X
RUN X
8
ORDERING SPARE PARTS
8.1
Serial Number and Model Name
In order to provide you with the best possible service, please have the model name, article number, serial number, exploded drawing and parts list ready. The corresponding contact options can be found in chapter 10 of this operating manual.
L NOTICE
The serial number of your equipment is unique.
It's located on a white sticker. The exact position of this sticker is shown in the following illustration.
Enter the serial number in the appropriate field.
Serial number:
Brand / Category:
Taurus / treadmill
Model Name:
Run X
Article Number:
TF-RUN-X-2
27
8.2
Parts List
No.
Name Qty. No.
Name
1
2
3
4
5
Main frame
Upright post - right side
Upright post - left side
Console frame
Rear main frame lifting handle
6
7
Handrail - right side
Curve cover fixing support - right side
Curve cover fixing support - left side 1
1
1
8
9 Front foot- right side
10 Front foot- left side
11 Rear foot- right side 1
1
1
12 Rear foot- left side
13 Magnet bracket
14 Adjustable resistor fixing bracket
15 Rear roller adjustable bracket
1
2
1
1
1 17 Curve cover reinforcement plate - right side
18 Curve cover reinforcement plate - left side
19 Adjustable resistor fixing plate
20 Curve cover fixing bracket
21 Magnet covered plate
1
2
2
2
1
1
1
1
1
22 Pulley wheel axle weldment
23 Driving wheel axle weldment
24 Front roller
25 Rear roller
26 Motor belt - 380PJ6
27 Motor belt - 250PJ6
28 Moving wheels
29 Wheel and axle
30 Driving pulley wheel -front
31 Driving wheel axle
2
1
1
1
1
2
1
1
1
1
28
32 Driving wheel plate -Aluminum
33 Aluminum slat fixing belt
34 EVA mat - t2.0×50×3600
35 Front plastic side cover - right side
36 Front plastic side cover - left side
37 Rear plastic side cover - right side
38 Rear plastic side cover - left side
39 Upright post side cover - right side
40 Upright post side cover - left side
41 Front foot stop
42 EVA mat - t5.0×70×3000
43 Top section resistance cable L -
1150mm
1
44 Top section resistance cable L - 450 1
45 Round magnet 4
46 Brake tension spring 1
4
1
1
1
1
1
1
1
2
2
1
47 Aluminum slat
48 Double hole Washer - t1.5*20*10
49 Manual adjustable handle
50 Stall adjustable assembly
51 Manual adjustable handle cover 1
52 Manual adjustable handle side cover 1
53 Stall adjustable post 2
54 Ordinary cylindrical spring
55 Console
56 2 pin connected wire L-1250mm
1
1
1
57 VR 3 pin connected wire L-1250mm 1
58 2 pin connected wire L-950mm 1
59 VR 3 pin connected wire L-950mm
60 3 pin connected wire L-500mm
1
1
1
1
60
120
61 2 pin - plug bottom section connected wire
62 Resistor VR
RUN X
1
1
Qty.
32 Driving wheel plate -Aluminum
33 Aluminum slat fixing belt
34 EVA mat - t2.0×50×3600
35 Front plastic side cover - right side
36 Front plastic side cover - left side
37 Rear plastic side cover - right side
38 Rear plastic side cover - left side
39 Upright post side cover - right side
40 Upright post side cover - left side
41 Front foot stop
42 EVA mat - t5.0×70×3000
43 Top section resistance cable L -
1150mm
1
44 Top section resistance cable L - 450 1
45 Round magnet 4
46 Brake tension spring 1
4
1
1
1
1
1
1
1
2
2
1
47 Aluminum slat
48 Double hole Washer - t1.5*20*10
49 Manual adjustable handle
50 Stall adjustable assembly
51 Manual adjustable handle cover 1
52 Manual adjustable handle side cover 1
53 Stall adjustable post 2
54 Ordinary cylindrical spring
55 Console
56 2 pin connected wire L-1250mm
1
1
1
57 VR 3 pin connected wire L-1250mm 1
58 2 pin connected wire L-950mm 1
59 VR 3 pin connected wire L-950mm
60 3 pin connected wire L-500mm
1
1
1
1
60
120
61 2 pin - plug bottom section connected wire
62 Resistor VR
RUN X
1
1
63 Screw fixing buckle
64 Screw fixing plate
65 T shape siderail guider
66 Allen head C.K.S full thread bolt -
M8*15
67 Allen head C.K.S full thread bolt -
M8*20
68 Hexagon head half thread bolt -
M8*65*20
69 Hexagon socket head full thread bolt - M8*65
70 Bearing 608ZZ
71 Sleeveφ12*φ8.1*18.4
72 Sleeveφ12*φ8.1*14
73 Guiding pulley wheel
74 Flat washer φ8
75 Internal Circlip φ23
76 Deep groove ball bearing 6201ZZ
77 One way bearing CSK12P
78 Allen head C.K.S half thread bolt
M8×55×20
79 Allen head C.K.S full thread bolt
M8×25
80 Curve washer Φ8.5×R25×t2.0
81 Phillip countersunk head self-tapping screw
82 Phillip countersunk head self-tapping screw
83 Phillip head C.K.S full thread screw
M5×10
85 Hexagon socket head full thread bolt M8×75
86 Allen head C.K.S half thread bolt
M8×30×20
87 Hex head locknut M8
88 Flat washer Φ8
89 Allen head C.K.S half thread bolt
M10×25×15
3
3
4
4
10
6
12
24
98
12
1
9
110
12
4
124
98
12
12
4
4
24
20
4
2
90 Hex head locknut M10
91 Flat washer Φ10
92 Allen countersunk head full thread screw M6×15
93 Hexagon head full thread bolt
M8×30
94 Hexagon nut M8
95 Allen head C.K.S step bolt
M6×50×36
96 Phillip pan head self-tapping screw
ST3×10
97 Phillip head C.K.S self-tapping screw
ST4×16
98 Phillip pan head full thread bolt
M5*15
99 Phillip head C.K.S full thread screw
M4×10
100 Hex head locknut M4
101 Hexagon socket head full thread bolt M8×45
102 Flat plug Φ38×t1.5
103 Hexagon socket head full thread bolt M8×15
104 Hex head locknut M8
105 Handrail - left side
106 End cover t1.2×φ31
107 Hexagon lock nylon nut M6
108 Flat washer Φ6
109 Spring washer φ6
110 Water holder
111 Philips Pan head full thread screw
M4x16
2
2
22
240
3
2
4
2
1
3
4
4
4
4
4
1
1
110
1
240
1
2
2
29
8.3
Exploded Drawing_
30
RUN X
RUN X
9
WARRANTY
Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline.
Error Descriptions
Your fitness equipment is developed for long-term, high-quality training. However, should a problem arise, please first read the operating instructions. For further assistance, please contact your contract partner or call our service hotline. To ensure your problem is solved as quickly as possible, please describe the defect as exactly as possible.
In addition to the statutory warranty, we provide a warranty for every fitness equipment purchased from us according to the following provisions.
Your statutory rights are not affected.
Warrantee
The warrantee is the first/original buyer and/or any person who received a newly purchased product as a gift from the original buyer.
Warranty period
The warranty periods, shown on our web shop, begin on delivery of the fitness equipment. The respective warranty periods for your equipment can be found on its product website.
Repair Costs
According to our choice, there will either be a repair, a replacement of individual damaged parts or a complete replacement. Spare parts, that have to be mounted while assembling the equipment, have to be replaced by the warrantee personally and are not a part of repair. After the expiration of the warranty period for repair costs, a pure parts warranty applies, which does not include the repair, installation and delivery costs.
The terms of use are defined as follows:
+ Home use: solely for private use in private households up to 3 hours per day
+ Semi-professional use: up to 6 hours per day (e. g. rehabilitation centres, hotels, clubs, company gyms)
+ Professional use: more than 6 hours per day (e. g. commercial gyms)
Warranty Service
Within the warranty period, equipment which develops faults as a result of material or manufacturing defects, will be repaired or replaced at our discretion. Ownership of equipment or parts of equipment which have been replaced is transferred to us. The warranty period is not extended nor does a new warranty period begin following repair or replacement under the warranty.
31
Warranty Conditions
For the warranty to be valid, the following steps must be taken:
Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance. If the fault is covered by our warranty, you will receive a new or repaired equipment in return.
Warranty claims are invalid in case of damage resulting from:
+ misuse or improper handling
+ environmental influences (moisture, heat, electrical surge, dust, etc.)
+ failure to follow the current safety measures for the equipment
+ failure to follow the operating instructions
+ use of force (e. g. hitting, kicking, falling)
+ interventions which were not carried out by one of our authorized service centres
+ unauthorised repair attempts
Proof of Purchase and Serial Number
Please make sure that you are able to provide the appropriate receipt when claiming on your warranty. So that we can clearly identify the model of your equipment, and for the purposes of our quality control, you will need to give the serial number of your equipment, when contacting the service team. Where possible please have your serial number and your customer number ready when you call our service hotline. It will help us to deal with your request swiftly.
If you cannot find the serial number on your fitness equipment, our service team is at your disposal to offer further information.
Service outside of the Warranty Period
We are also happy to issue an individual cost estimate if there is a problem with your fitness equipment after the warranty has expired, or in cases which do not fall under the terms of the warranty, e. g. normal wear and tear. Please contact our customer service team to find a quick and cost-effective solution to your problem. In such a case you will be responsible for the delivery costs.
Communication
Many problems can be solved just by speaking to us as your specialist supplier. We know how important it is to you as a user of the fitness equipment to have problems solved quickly and simply, so you can enjoy working out with minimal interruption. For that reason, we also want to resolve your queries quickly and in a straightforward manner. Thus, please always keep your customer number and the serial number of the faulty equipment handy.
32
RUN X
RUN X
10
CONTACT
DE
TECHNIK
📞 +49 4621 4210-900
📠 +49 4621 4210-698
🕒 Öffnungszeiten entnehmen Sie unserer Homepage.
SERVICE
📞 0800 20 20277
(kostenlos)
🕒 Öffnungszeiten entnehmen Sie unserer Homepage.
DK
TEKNIK OG SERVICE
📞 80 90 16 50
+49 4621 4210-945
🕒 Åbningstider kan findes på hjemmesiden.
PL
TECHNIKA I SERWIS
📞 22 307 43 21
+49 4621 42 10-948
🕒 Godziny otwarcia można znaleźć na stronie głównej.
FR
TECHNIQUE & SERVICE
📞 +33 (0) 172 770033
+49 4621 4210-933
🕒 Vous trouverez les heures d’ouverture sur notre site
Internet.
BE
TECHNIQUE & SERVICE
📞 02 732 46 77
+49 4621 42 10-932
🕒 Vous trouverez les heures d’ouverture sur notre site
Internet.
UK
TECHNICAL SUPPORT
📞 +44 141 876 3986
SERVICE
📞 +44 141 876 3972
🕒 You can find the opening hours on our homepage.
NL
TECHNISCHE DIENST & SERVICE
📞 +31 172 619961
🕒 De openingstijden vindt u op onze homepage.
INT
TECHNICAL SUPPORT & SERVICE
📞 +49 4621 4210-944
🕒 You can find the opening hours on our homepage.
AT
TECHNIK & SERVICE
📞 0800 20 20277
(Freecall)
+49 4621 42 10-0
🕒 Öffnungszeiten entnehmen
Sie unserer Homepage.
CH
TECHNIK & SERVICE
📞 0800 202 027
+49 4621 42 10-0
🕒 Öffnungszeiten entnehmen
Sie unserer Homepage.
Please find a detailed overview including address and opening hours for all stores of the Sport-Tiedje
Group in Germany and abroad on the following website:
www.sport-tiedje.com/en/stores
33
WEBSHOP AND SOCIAL MEDIA
Sport-Tiedje is Europe’s largest specialist store for home fitness equipment with currently 80 stores and one of the world’s most renowned online mail order companies for fitness equipment.
Private customers order via the 25 web shops in the respective national language or have their desired equpiment assembled on site. In addition, the company supplies fitness studios, hotels, sports clubs, companies and physio practices with professional equipment for endurance and strength training.
Sport-Tiedje offers a wide range of fitness equipment from renowned manufacturers, high-quality in-house developments and comprehensive services, such as a build-up service and sports scientific advice before and after the purchase. The company employs numerous sports scientists, fitness trainers and competitive athletes.
Visit us also on our social media platforms or our blog!
www.sport-tiedje.co.uk www.sport-tiedje.de/blog www.facebook.com/SportTiedje www.instagram.com/sporttiedje www.youtube.com/user/sporttiedje
34
RUN X
RUN X
35
Treadmill
RUN X
advertisement
Related manuals
advertisement