LucidSound LS25 User Guide
Add to My manuals34 Pages
LucidSound LS25 features a versatile design, allowing you to seamlessly switch between gaming on your PC, Xbox One, PS4, or mobile devices. Experience immersive audio with powerful 50mm speakers, and communicate clearly with the detachable boom microphone or built-in microphone. Easily adjust volume and mute your mic with on-ear controls.
advertisement
USER GUIDE
GUIDE D’UTILISATION
BEDIENUNGSANLEITUNG
GUÍA DE USO
MANUALE D’USO
EN HEADSET
[L]
Volume
Wheel
3.5mm Port
Microphone
Port
[R]
Press to mute
Press again to unmute
ACCESSORIES
1
Boom Mic
2
Mobile / Console cable
3
3.5mm to PC cable
4
Wind Sock
5
Mic Port Cover
EN
EN MICROPHONE
The LS25 includes an optional boom microphone. When this microphone is removed, an internal microphone is activated.
To connect the boom microphone, insert it into the port on the bottom of the headset.
PLAYSTATION
®
4 SETUP
1 Go into Settings > Devices > Audio Devices and set the ‘Output to Headphone’ to
‘All Audio’.
2 Set the ‘Volume Control (Headphones)’ to maximum.
You can now use the controls on the headset to adjust volume and mute.
MOBILE SETUP
PS4
Connect one end of the mobile cable to the
3.5mm input on the headset and the other end to the 3.5mm output on the mobile device.
XBOX ONE SETUP
Controllers with 3.5mm port
1 Connect one end of the Xbox One chat cable to the 3.5mm port on the headset and the other end to the 3.5mm port on the Controller.
2 Press the Xbox Guide button and navigate to the gear icon. Then, scroll down and select ‘ Audio .’
3 Set ‘ Headset volume ’ to maximum.
Make sure that ‘Headset mic’ is turned to ‘On’.
4 Set ‘ Headset chat mixer ’ for the desired level of game and chat audio balance (default is 50%). You can now use the controls on the headset to adjust volume and mute.
XB1
Controllers without 3.5mm port
If the Xbox One Controller does not have a 3.5mm port, an Xbox One Stereo
Headset adapter is required
(not included).
1 Connect one end of the Xbox One chat cable to the 3.5mm port on the headset and the other end to the 3.5mm port on the Stereo Headset Adapter.
2 Adjust the game/chat balance on the
Stereo Headset Adapter for the desired level of chat and game audio balance.
3 Adjust the volume on the Stereo Headset
Adapter to Maximum. You can now use the controls on the headset to adjust volume and mute.
EN
EN PC SETUP
For computers with separate headphone and mic ports
1 Connect the single jack end of the 3.5mm to PC cable to the 3.5mm port on the headset.
2 Connect the green jack to the headphone port on the computer.
3 Connect the pink jack to the microphone port on the computer.
4 Open the computer’s sound control panel and set the LS25 to be the input and output device.
3.5mm to PC cable
For computers with a single combined headphone/mic port
1 Connect one end of the mobile cable to the
3.5mm port on the headset and the other end to the 3.5mm port on the computer.
2 Open the computer’s sound control panel and set the LS25 to be the input and output device.
PC
Mobile / Console Cable
ENABLING WINDOWS SONIC FOR HEADPHONES
[ XBOX ONE | PC ]
For XBOX ONE
Press the Xbox Guide button and navigate to All settings > Display & sound
> Audio output . Under the Headset Audio dropdown select ‘Windows Sonic for Headphones’.
PC XB1
For PC
Right click the speaker icon in the taskbar. Choose Spatial Sound (None) from the pop up menu. Choose ‘Windows Sonic for Headphones’ as the
Spatial sound format. Click ‘OK.’
EN
SUPPORT
Model No: LS25
LucidSound, Inc.
Made in China
©2018 Lucid Sound, Inc. 701 Palomar Airport Rd., Suite 230, Carlsbad, CA 92011 U.S.A. LucidSound and the Lucid Sound logo, are trademarks of Lucid Sound, Inc., its subsidiaries, and affiliates.
The shape and design of this product are a trade dress of Lucid Sound, Inc., its subsidiaries and affiliates. All rights reserved. All other product names and images are trademarks or registered trademarks of their respective owners. Made in China. Product features, appearance and specifications may be subject to change without notice. Please retain this information for future reference.
A copy of the EU/ED Declaration of Conformity can be found at lucidsound.com/EUDOC.
?#!*
EN SUPPORT
Warranty
LucidSound, Inc. warrants this product to be free from defects in materials and workmanship for the warranty period. This non-transferable, 1-year limited warranty is only to you, the first end-user purchaser. If a defect covered by this warranty occurs AND you provide proof of purchase,
LucidSound, Inc., at its option, will repair or replace the product at no charge (excluding shipping to LucidSound).
The LucidSound, Inc., 1-year limited warranty is available to customers in the United States and worldwide. Your sole and exclusive remedy is repair or replacement of your LucidSound product.
In no event shall LucidSound’s liability exceed the original purchase price of the product. This warranty does not apply to: (a) normal wear and tear or abusive use; (b) industrial, professional or commercial use; (c) if the product has been tampered with or modified. This non-transferable warranty is only valid in the region/country in which the headset was originally purchased.
To receive warranty service, please contact us at: lucidsound.com
(toll free) 888-661-4469
1-760-579-6969
Europe
LucidSound, Inc. 2-year limited warranty is available to customers in Europe.
Australia
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a 1 year replacement warranty in which you are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
What you must do:
?#!*
If a defect has appeared within 90 days from the date of purchase, the product may be returned to the retailer for a replacement.
If a defect has appeared after 90 day from the date of purchase, you must initiate a repair by following the online repair process at www.lucidsound.com.au.
Once all details are completed, you will receive a return authorisation number.
Then label and ship your LucidSound headset – including the return authorisation (RA) number, freight prepaid, to LucidSound’s authorised repair centre.
LucidSound c/o Tecworks International Pty Ltd
Unit 1 / 12 Tollis Place
Seven Hills NSW 2141
Please ensure the return authorisation (RA) number is prominently displayed on the outside of your packaging. The cost incurred to return the product to the retailer or to the authorised repair centre as part of a Warranty claim are your responsibility.
What we will do:
During the Warranty Period, we will, at our option, repair or replace the product or any defective parts. We will also bear the reasonable costs of standard return shipping. If this cannot be done, then we will refund the purchase price to you.
AU wholesale distributor:
Bluemouth Interactive Pty Ltd, Level 2, 2 Darling Street, South Yarra, Victoria, 3141
Email: [email protected]
CASQUE
[G]
Volume
Prise 3,5mm
Prise micro
[D]
FR
Appuyez pour désactiver le son du micro
Appuyez à nouveau pour réactiver le son du le micro
FR ACCESSOIRES
1
Micro externe
2
Câble mobile / console
3
Câble 3,5mm à PC
4
Bonnette anti-vent
5 Couverture du prise micro externe
MICRO EXTERNE
Le LS25 inclus un micro externe optionnel. Lorsque ce micro n’est pas branché, un micro interne est active.
Pour connecter le micro externe, inserer le simplement dans le port prevu a cet effet sur la partie inferieure du casque.
INSTALLATION PLAYSTATION
®
4
PS4
FR
1 Aller dans reglages > appareils > appareils audio et regler la sortie vers casque sur
« tout audio » .
2 Regler le «Controle du volume casque» sur maximum. Vous pouvez maintenant utiliser les controles du casque pour ajuster le volume et le coupure du volume.
MOBILE
Connecter le câble mobile sur le port
3,5mm du casque et l’autre extremité sur le port 3,5mm de l’appareil mobile.
FR INSTALLATION XBOX ONE
Manettes avec port 3,5mm
1 Connecter le câble chat sur le port
3,5mm du casque et l’autre extremité sur le port 3,5mm de la manette.
2 Appuyez sur le bouton Xbox Guide et naviguez jusqu’à l’icône de l’engrenage.
Ensuite, faites défiler vers le bas et sélectionnez « audio ».
3 Mettre le « volume casque » au maximum.
Assurez-vous que « micro casque » est activé.
4 Regler le niveau du chat du casque au niveau desire, 50% est le reglage par defaut. Vous pouvez maintenant utiliser les controles du casque pour ajuster le volume et le coupure du volume.
Manettes sans port 3,5mm
Si la manette ne dispose pas de port
3,5mm, un adaptateur Xbox One pour casque Stereo est requis (non inclus).
1 Connecter le câble chat sur le port 3,5mm du casque et l’autre extremité sur le port
3,5mm de la manette.
2 Ajuster la balance jeu/chat sur l’adaptateur stereo au niveau désiré.
3 Ajuster le volume de l’adaptateur stereo au maximum. Vous pouvez maintenant utiliser les controles du casque pour ajuster le volume et le coupure du volume.
XB1
INSTALLATION PC
Pour les ordinateurs avec des ports casque et micro distincts
1 Connectez la prise simple sur une extrémité du câble de 3,5 mm au PC au port 3,5 mm du casque.
2 Connectez la prise verte au port du casque sur l’ordinateur.
3 Connectez la prise rose au port du microphone sur l’ordinateur.
4 Ouvrez le panneau de contrôle du son de l’ordinateur et configurez le LS25 comme périphérique d’entrée et de sortie.
Pour ordinateurs équipés d’un seul combiné casque / microphone
1 Connectez une extrémité du câble mobile au port
3,5 mm du casque et l’autre extrémité au port de
3,5 mm sur l’ordinateur.
2 Ouvrez le panneau de contrôle du son de l’ordinateur et configurez le LS25 comme étant le périphérique d’entrée et de sortie.
Câble Mobile / Console
FR
FR ACTIVATION DE WINDOWS SONIC FOR HEADPHONES
[ XBOX ONE | PC ]
Pour XBOX ONE
Appuyez sur le bouton Xbox Guide et naviguez à Reglages > Image et son > Sortie Audio . Dans la liste déroulante « Casque Audio », sélectionnez
« Windows Sonic for Headphone ».
PC XB1
Pour PC
Cliquez avec le bouton droit de la souris sur l’icône du haut-parleur dans la barre des tâches. Choisissez le son de Spatial (None) dans le menu contextuel. Choisissez « Windows Sonic for Headphones » en tant que format de son spatial. Cliquez sur ‘OK’.
SUPPORT
?#!*
Model No: LS25
Fabriqué
©2018 Lucid Sound, Inc.
Lucid Sound Inc garantit ce produit contre tout défaut de matériau ou de fabrication durant la période de garantie. Cette garantie limitée non transférable de 2 ans (Canada: garantie limitée non transferable de 1 an) n’est valable que pour le premier acheteur du produit. Si un défaut couvert par cette garantie survient ET si vous avez la preuve d’achat du produit, Lucid Sound Inc, procèdera, a sa discrétion, au remplacement ou à la réparation du produit à sa charge (excepte les frais d’envoi à Lucid Sound). Cette garantie non transférable n’est valable que dans la région / le pays dans lequel le casque a été acheté à l’origine.
La garantie limitee de 2 ans offerte par Lucid Sound Inc, est valable pour les clients Européens. Le seul et unique remède est la réparation ou le remplacement de votre produit Lucid Sound. En aucun cas la responsabilité de Lucid Sound ne pourra excéder le montant initial d’achat du produit. Cette garantie ne s’applique pas à : (a) Usure normale due a l’utilisation ou utilisation abusive ; (b) usage industriel, professionnel ou commercial ; (c) Si le produit a été modifié ou démonté.
Pour recevoir le service de garantie s’il vous plaît nous contacter à : lucidsound.com
Un examplaire de la Déclaration de Conformité CE/UE peut être trouvé à lucidsound.com/EUDOC.
HEADSET
[L]
Lautstärke
3,5mm Anschluss
Mikrofonanschluss
[R]
DE
Drücken Sie:
Mikrofon stumm
Erneut drücken:
Mikrofon stumm ausschalten
DE ZUBEHÖR
1
Mikrofonarm
2
Kabel für Mobil / Konsole
3
3,5mm zum PC-Kabel
4
Mikrofon-Windschutz
5
Mikrofonanschluss Kappe
MIKROFON
Das LS25 wird mit einem optionalen Mikrofonarm geliefert.
Wenn dieses Mikrofon entfernt wird, dann wird automatisch ein internes Mikrofon aktiviert.
Um den Mikrofonarm mit dem
Headset zu verbinden, muss es einfach in den entsprechenden
Anschluss an der Unterseite des
Headsets gesteckt werden.
PLAYSTATION
®
4 SETUP
PS4
1 Gehen sie in Einstellungen -Geräte - Audiogeräte und stellen sie den Ausgang zum
Kopfhörer auf “Gesamtes Audio”.
2 Stellen Sie die Lautstärkeregelung (Kopfhörer) auf Maximum ein.Sie können nun die
Bedienelemente am Headset verwenden, um die Lautstärke einzustellen und stumm zu schalten.
MOBILE SETUP
DE
Verbinde das eine
Ende des
Mobilgerätekabels mit dem 3,5mm
Anschluss am Headset und das andere Ende des Kabels mit dem
3,5mm Ausgang am
Mobilgerät.
DE XBOX ONE SETUP
Mit 3,5mm Anschluß
1 Stecke das eine Ende des Xbox One
Chatkabels in den 3,5mm Anschluss am
Headset und das andere Ende in den
3,5mm Anschluss des Controllers
2 Drücken Sie die Taste Xbox Guide und
Navigiere zum Gang-Symbol. Scrollen Sie dann nach unten und wählen Sie “ Audio ”.
3 Setze “ Headset Lautstärke ” auf maximum. Versichern Sie sich, dass das
Headset Mikrofon eingeschaltet ist.
4 Stellen sie den “ Headset Chat Mixer ” auf das gewünschte Niveau von Chat- und
Spielaudio Balance (Standard ist 50%).
Sie können nun die Bedienelemente am
Headset verwenden, um die Lautstärke einzustellen und stumm zu schalten.
Ohne 3,5mm Anschluß
Wenn der Xbox One Controller nicht über einen 3,5mm Anschluss verfügt, wird der Xbox One Stereo Headset Adapter benötigt. (nicht beinhaltet).
1 Stecke das eine Ende des Xbox One
Chatkabels in den 3,5mm Anschluss am
Headset und das andere Ende in den
3,5mm Anschluss des Stereo Headset
Adapter .
2 Justieren sie die Game / Chat Balance am
Stereo Headset Adaper auf das gewünschte Niveau von Chat und Spielaudio
Balance.
3 Stellen sie die Lautstärke am Stereo Headset Adapter auf Maximum. Sie können nun die Bedienelemente des Headsets verwenden, um die Lautstärke einzustellen und stumm zu schalten.
XB1
PC SETUP
Für Computer mit separaten Kopfhörern und Mikrofonanschlüssen
1 Verbinden Sie die einzelne Buchse am Ende des
3,5-mm-PC-Kabels mit dem 3,5-mm-Anschluss am
Headset.
2 Verbinden Sie die grüne Buchse mit dem Kopfhöreranschluss am Computer.
3 Verbinden Sie die rosa Buchse mit dem Mikrofonanschluss am Computer.
4 Öffnen Sie das
Sound-Bedienfeld des
Computers und stellen Sie das LS25 als Eingabe- und
Ausgabegerät ein.
3,5mm zum
PC-Kabel
Für Computer mit einem einzigen kombinierten
Kopfhörer / Mikrofonanschluss
1 Verbinden Sie ein Ende des Mobilkabels mit dem
3,5-mm-Port am Headset und das andere Ende mit dem 3,5-mm-Port am Computer.
2 Öffnen Sie das Sound-Bedienfeld des Computers und stellen Sie das LS25 als Eingabe- und
Ausgabegerät ein.
Kabel Mobil / Konsole
DE
DE AKTIVIEREN VON WINDOWS SONIC FOR HEADPHONES
[ XBOX ONE | PC ]
FÜR XBOX ONE
Drücken Sie die Xbox Guide-Taste und navigieren Sie zu Alle Einstellungen> Display
& Sound> Audio-Ausgang . Wählen Sie unter dem Headset Audio Dropdown ‘Windows Sonic for Headphones’ aus
SUPPORT
PC XB1
FÜR PC
Klicken Sie mit der rechten Maustaste auf das Lautsprechersymbol in der Taskleiste.
Wählen Sie Spatial Sound (None) aus dem Popup-Menü. Wählen Sie “ Windows
Sonic for Headphones ” als das räumliche Klangformat. “OK” klicken.
?#!*
Model No: LS25 ©2018 LucidSound, Inc.
Lucid Sound, Inc. garantiert, dass dieses Produkt frei von Mängeln in Material und Verarbeitung für den Garantiezeitraum ist. Diese nicht übertragbare, 2 Jahre Garantie (Canada: 1 Jahre Garantie) ist nur für Sie, den ersten Käufer und Endbenutzer. Soweit ein Mangel, der von dieser Garantie gedeckt wird, auftritt und Sie über einen Nachweis über den Kauf des Produkt verfügen, wird Lucid Sound,
Inc. nach eigenem Ermessen entweder reparieren oder das Produkt kostenlos (ohne Versandkosten zu Lucid Sound) ersetzen. Diese nicht übertragbare Garantie gilt nur in der Region / Land, in der das
Headset ursprünglich gekauft wurde.
Die Lucid Sound, Inc. 2 Jahre Garantie ist für Kunden in Europe verfügbar. Die einzige und ausschließliche Abhilfe ist Reparatur oder der Ersatz Ihres Lucid Sound Produkts. In keinem Fall überschreitet die Haftung von Lucid Sound, Inc. den ursprünglichen Kaufpreis des Produkts. Diese Garantie gilt nicht für: (a) normalen Verschleiß oder Missbrauch; (b) Industrie, berufliche oder kommerzielle Zwecke;
(c) wenn das Produkt manipuliert oder verändert wurde.
Um Garantieservice zu erhalten kontaktieren Sie uns bitte wie folgt:
lucidsound.com
Eine Kopie der EU/EG-Konformitätserklärung finden sie unter lucidsound.com/EUDOC.
CUFFIA
[S]
Volume
Porta 3,5 millimetri
Porta microfono
[D]
Premere per silenziare il microfono
Premere nuovamente per riattivare il microfono
IT
IT ACCESSORI
1
Microfono a braccio
2
Cavo per dispositivo mobile / console
3
Cavo 3,5 millimetri a PC
4
Protezione anti-vento
5 Coperchio della porta Mic
MICROFONO
L’LS25 include un microfono ad asta opzionale. Quando questo microfono viene rimosso, un microfono interno è attivato.
Per collegare il microfono ad asta,
è sufficiente inserirlo nella porta sulla parte inferiore della cuffia.
CONFIGURAZIONE PLAYSTATION
®
4
PS4
IT
1 Andate in Impostazioni > Dispositivi > dispositivi audio Impostare l’uscita per cuffie per
‘All Audio’
2 Impostare il ‘controllo del volume (cuffie)’ al massimo. È ora possibile utilizzare i controlli sull’auricolare per regolare il volume e disattivare la funzione.
CONFIGURAZIONE CELLULARE
Collegare un’estremità del cavo cellulare all’ingresso 3,5mm
Dell’auricolare e l’altra estremità all’uscita
3,5mm del dispositivo mobile.
IT CONFIGURAZIONE XBOX ONE
Con porta 3,5mm
1 Collegare un’estremità del cavo chat
Xbox One alla porta 3,5 millimetri dell’auricolare e l’altra estremità alla porta
3,5mm sul controller.
2 Premere il pulsante Guida Xbox e
Spostarsi sull’icona a forma di ingranaggio. Quindi, scorrere verso il basso e selezionare ‘ Audio ’.
3 Selezionare ‘ Volume ’ e impostare ‘ il volume Auricolare’ a massimo. Assicurarsi che ‘auricolare microfono’ è rivolto a ‘On’.
4 Impostare ‘mixer auricolare chat’ per il livello desiderato di chat ed gioco audio bilanciato (di default è 50%). È ora possibile utilizzare il controllo del volume sulla rotella per regolare il volume e disattivare il microfono.
Senza porta 3,5mm
Si la manette ne dispose pas de port
3,5mm, un adaptateur Xbox One pour casque Stereo est requis (non inclus).
1 Collegare un’estremità del cavo chat alla porta 3,5 mm dell’auricolare e l’altra estremità alla porta 3,5mm dell’adattatore
Auricolare Stereo.
2 Regolare il volume sul Adattatore auricolare stereo su Massimo. È ora possibile utilizzare il controllo del volume sulla rotella di sinistra per regolare il volume.
3 SImpostare il ‘controllo del volume (cuffie)’ al massimo. È ora possibile utilizzare il controllo del volume sullarotella di sinistra per regolare il volume.
XB1
CONFIGURAZIONE PC
Per i computer con cuffie separate e porte microfono
1 Collegare l’estremità singola jack del cavo da
3,5 mm a PC alla porta da 3,5 mm sull’auricolare.
2 Collegare il jack verde alla porta cuffie del computer.
3 Collegare il jack rosa alla porta del microfono del computer.
4 Aprire il pannello di controllo del suono del computer e impostare LS25 come dispositivo di input e output.
Câble 3,5mm à PC
Per i computer con una singola cuffia / microfono combinato
IT
1 Collegare un’estremità del cavo mobile alla porta da 3,5 mm sull’auricolare e l’altra estremità alla porta da 3,5 mm sul computer.
2 Aprire il pannello di controllo del suono del computer e impostare LS25 come dispositivo di input e output.
Câble Mobile / Console
IT ABILITANDO WINDOWS SONIC FOR HEADPHONES
[ XBOX ONE | PC ]
Per XBOX ONE
Premere il pulsante Guida Xbox e passare a Tutte le impostazioni> Display e audio> Uscita audio . Sotto il menu a discesa Audio auricolare selezionare
‘ Windows Sonic per le cuffie ’.
PC
Per PC
Fare clic con il pulsante destro del mouse sull’icona dell’altoparlante nella barra delle applicazioni. Scegli il carattere Spatial (Nessuno) dal menu a comparsa. Scegliere
“ Windows Sonic per le cuffie ” come formato audio spaziale. Fai clic su “OK”.
XB1
SUPPORTO
?#!*
Model No: LS25 ©2018 Lucid Sound, Inc.
Lucid Sound, Inc. garantisce che questo prodotto è privo di difetti in materiali e manodopera per il periodo di garanzia. Questa garanzia limitata, non trasferibili, di 2 anni (Canada: 1 anno) è solo per voi, il primo utente finale acquirente. Se un difetto coperto da questa garanzia si verifica E potete fornire la ricevuta di acquisto, Lucid Sound, Inc., a sua discrezione, riparerà o sostituirà il prodotto gratuitamente (escluso il trasporto a Lucid Sound). Questa garanzia non trasferibile è valida solo nella regione / paese in cui l’auricolare è stato originariamente acquistato.
Lucid Sound, Inc., garanzia limitata di 2 anni di è disponibile per i clienti europei. L’unico ed esclusivo rimedio è la riparazione o la sostituzione del prodotto Lucid Sound. In nessun caso la responsabilità di Lucid Sound puó essere superiore al prezzo di acquisto originale del prodotto. Questa garanzia non si applica a: (a) normale usura o uso abusivo; (b), l’uso professionale, commerciale o industriale; (c) se il prodotto è stato manomesso o modificato.
Per ricevere assistenza in garanzia, vi preghiamo di contattarci all’indirizzo: lucidsound.com
Una copia della dichiarazione UE/CE di Conformità è disponibile all’indirizzo lucidsound.com/EUDOC.
SUPPORTO
?#!*
INFORMAZIONE AGLI UTENTI DI APPARECCHIATURE DOMESTICHE
Ai sensi dell’art. 26 del Decreto Legislativo 14 marzo 2014, n. 49 “Attuazione della Direttiva 2012/19/UE sui Rifiuti di Apparecchiature Elettriche ed Elettroniche
(RAEE)” e del Decreto Legislativo 188 del 20 novembre 2008.
Il simbolo del cassonetto barrato riportato sull’apparecchiatura o sulla sua confezione indica che il prodotto alla fine della propria vita utile deve essere raccolto separatamente dagli altri rifiuti per permetterne un adeguato trattamento e riciclo.
Si ricorda che le pile/accumulatori eventualmente presenti, laddove possibile, debbono essere rimosse dall’apparecchiatura prima che questa sia conferita come rifiuto.
L’utente potrà , pertanto, conferire gratuitamente l’apparecchiatura e l’eventuale batteria giunta a fine vita agli idonei centri comunali di raccolta differenziata dei rifiuti elettrici ed elettronici. In alternativa l’utente potrà riconsegnarle al rivenditore secondo le seguenti modalità:
• sia pile portatili sia apparecchiature di piccole dimensioni, ovvero con almeno un lato esterno non superiore a 25 cm, è prevista la consegna gratuita senza obbligo di acquisto presso i negozi con una superficie di vendita delle apparecchiature elettriche ed elettroniche superiore ai 400 mq. Per negozi con dimensioni inferiori, tale modalità è facoltativa.
• per apparecchiature con dimensioni superiori a 25 cm, è prevista la consegna in tutti i punti di vendita in modalità 1 contro 1, ovvero la consegna al rivenditore potrà avvenire solo all’atto dell’acquisto di un nuovo prodotto equivalente, in ragione di uno a uno.
L’adeguata raccolta differenziata per l’avvio successivo dell’apparecchiatura e delle pile/accumulatori dismessi al riciclaggio, al trattamento e allo smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti negativi sull’ambiente e sulla salute e favorisce il reimpiego e/o riciclo dei materiali di cui essi sono composti.
Lo smaltimento abusivo di apparecchiature, pile ed accumulatori da parte dell’utente comporta l’applicazione delle sanzioni di cui alla corrente normativa di legge.
IT
[I]
ES AURICULAR
Volume
Puerto 3,5mm
Entrada
Micrófono
[D]
Presione para silenciar Micrófono
Presione nuevamente para activar el micrófono
ACCESSORIO
1
Brazo de micro
2
Cable para dispositivo móvil / consola
3
Cable de 3,5 mm a PC
4
Quitaviento micrófono
5
Puerto de micro cubierto
ES
ES MICRÓFONO
El LS25 incluye un micrófono opcional. Cuando el brazo del micro se desístala, un micrófono interno se activa.
Para conectar el micrófono, es muy sencillo, inserta el brazo del micro en el puerto del auricular.
CONFIGURACIÓN
PLAYSTATION
®
4
1 Ves a Ajustes > Dispositivos > Dispositivos de audio y ajusta la salida de todo el audio del Auricular.
2 Ajusta “Control de Volumen (Auricular)” al máximo. Podrás controlar las funciones en el altavoz izquierdo.
PS4
CONFIGURACIÓN
MOBILE
Conecta el jack
3.5 mm en la salida del auricular, y el otro extremo en la salida de audio del dispositivo móvil.
CONFIGURACIÓN
XBOX ONE
Con conexión en el puerto 3.5mm
del Mando
1 En la Xbox One conecta el cable Jack
3.5 mm en el puerto del auricular, el otro extremo en el puerto 3.5 mm del Mando.
2 Presione el botón Guía Xbox y navegue hasta el icono de engranaje. Luego, desplácese hacia abajo y seleccione
‘ Audio ’.
3 Selecciona Volumen y establece el Volumen Auricular al máximo y el control del micrófono al mínimo. Asegúrese de que
‘micrófono auricular está activada.
4 Ajuste “Auricular chat mixer” para el los niveles de chat y el balance del audio del juego(por defecto el 50%). Ahora puede utilizar los controles de los auriculares para ajustar el volumen y mute.
XB1
ES
Cuando se utiliza un adaptador de auriculares estéreo
En el caso de que tú mando de la Xbox One no incluya el puerto para la conexión del auricular estéreo. Es necesario el adaptador correspondiente (no incluido).
1 En tu Xbox One conecta el cable Jack 3.5 mm en el puerto del auricular, el otro extremo en el puerto 3.5 mm del adaptador para el auricular estéreo.
2 Ajustar los niveles de audio del juego/ chat en el auricular estéreo.Adaptador para el los volúmenes personalizados.
3 Ajustar el volumen del auricular estéreo hasta para maximizar. Ahora puede utilizar los controles de los auriculares para ajustar el volumen y mute.
ES
CONFIGURACIÓN
PC
Para equipos
con auriculares y puertos de micrófono independiente
1 Conecte el extremo del conector del cable de
3,5 mm a 3,5 mm PC al puerto de los auriculares.
2 Conecte la toma verde al puerto de auriculares del equipo.
3 Conecte el conector de micrófono de color rosa al puerto en el equipo.
4 Abra panel de control de sonido del ordenador y en septiembre la LS25 para ser el dispositivo de entrada y de salida.
Cable de 3,5 mm a la PC
Para equipos con un puerto de salida de auriculares / micrófono combinado
1 Conecte un extremo del cable flotante en el puerto de 3.5mm en el auricular y el otro extremo al puerto de 3,5 mm en el equipo.
2 Abra panel de control de sonido del ordenador y en septiembre la LS25 para ser el dispositivo de entrada y de salida.
PC
Cable Móvil / Consola
ACTIVACIÓN DE WINDOWS SONIC FOR HEADPHONES
[ XBOX ONE | PC ]
Para XBOX ONE
Presione el botón Guía Xbox y vaya a todos los ajustes> Sonido y pantalla>
Salida de audio . Bajo el menú desplegable de auriculares de audio seleccione ‘de
Windows para Sonic Auriculares’.
SOPORTE
PC XB1
ES
Para PC
Haga clic en el icono del altavoz en la barra de tareas. Elija Spatial de sonido (Ninguno) en el menú emergente. Elija ‘de Windows para Sonic Auriculares’ como el formato de sonido espacial. Haga clic en ‘Aceptar’.
?#!*
Model No: LS25 ©2018 Lucid Sound, Inc.
Lucid Sound, Inc. garantiza los materiales y mano de obra durante el periodo de garantía del producto. Esto no es transferible, la garantía tiene una limitación de 2 años (Canada: 1 año). Importante! sólo podrá ser utilizada por el al usuario final. Cualquier defecto será cubierto bajo esta garantía. Es necesario presentar el comprobante de compra. Lucid Sound, Inc., reparará o reemplazará el producto sin cargos (Como excepción la compañía no se hará cargo del coste del envío en tu dirección del auricular Lucid Sound). Esta garantía intransferible solo es válida en la región / país en el que se adquirió originalmente el auricular.
La garantía limitada de 2 años será para los clientes europeos. Su único, y exclusivo derecho es la reparación o sustitución de su producto Lucid Sound. En ningún caso la responsabilidad de auricular Lucid Sound excederá del precio de compra original del producto. Esta garantía no se aplica a : ( a) el desgaste normal o el uso abusivo ;
( b ) el uso industrial , comercial o profesional ; ( c ) si el producto ha sido manipulado o modificado previamente.
Para recibir la garantía, por favorcontacte con nosotros en:
lucidsound.com
La Declaración de Conformidad de la UE/CE se puede consultar en lucidsound.com/EUDOC.
advertisement