GSR Laser Tools Geo FL 80SP Quick Start Manual

Add to My manuals
2 Pages

advertisement

GSR Laser Tools Geo FL 80SP Quick Start Manual | Manualzz
Geo FL 80SP Tracking Multi Line Laser
with automatic vertical line Target Tracking
The FL 80 Tracking Liner SP is the latest product in our Selection PRO range which redefines innovation
and ease of use. Due to its tracking function it is unique when compared to all other products in its
category.
The vertical laser line automatically aligns with the on-grade position of the receiver. This Selfalignment of the instrument eliminates arduous manual alignment.
Perfect alignment – The easy way
The automatic tracking function of the FL 80 SP Tracking Liner saves you time and
money eliminating the need for manual alignment. The alignment is done automatically via the Receiver FR 57-TR.
Bring the line to where you needed.
•
•
•
•
Activate the tribrach motor
Locate on-grade position of the Receiver at the target point
Press the “Auto” button on the Receiver and then press an arrow button
The nearest Vertical Laser Line automatically tracks to coincide the on-grade position
of the Receiver
Features :
- 4 vertical lines at 90° to each other
- 1 horizontal line with a 130° arc
- Laser cross to the ceiling
- Plumb down beam
- Self-levelling compensator with magnetic damping
- Tracking function up to 30 m
- 360° horizontal orientation in either motorized or manual mode
- Use with FR 57-TR receiver (incl.) to extend the working range
up to 80 m (w/o tracking)
- Self-levelling function can be switched off for manual use
- Slow motion screw for fine adjustment
- Audible and visible alarm when instrument is out of level
Specification:
- Self-levelling range +/- 3°
- Levelling accuracy +/- 2 mm @ 10m
- Working range up to 30m
with receiver up to 80m
with tracking function up to 30m
- Cantering accuracy Tracking +/- 1 mm @ 10m
- Power supply Li-Ion
- Operating time Laser 8 h Li-Ion
- Operating time rotating Base 15 h Alkaline
- Protection class IP 54
- Laser diode 635 nm
- Laser class 2
- Temperature range -10° C to +45° C
Supplied with :
- FR 57-TR Receiver with Staff clamp
- Floor Tripod
- Magnetic target
- Li-Ion battery pack with charger
- Battery case for the optional use of alkaline batteries
- 5/8– tripod adapter
GSR Laser Tools
Unit 7 / 7 Prindiville Drive, Wangara WA 6065
Ph: 08 9409 4058 Email : [email protected]

advertisement

Related manuals

Download PDF

advertisement