VPC 100 scanner User manual

Below you will find brief information for scanner VPC 100. This manual provides instructions on how to use the VPC 100 scanner, including information on how to start and stop the device, connect it to a computer, change the battery, and use the keyboard.

PDF

Document

Hello! I am an AI chatbot specifically trained to assist you with the VPC VPC 100 User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Start/Stop using a button
USB connectivity for data transfer
Replaceable AA battery
Virtual keyboard with ASCII character mode
Navigation keys for menu selection and cursor movement
Virtual keyboard for easy character input
Help information accessible via button
Direction keys for navigation
Scrolling through pages using keys
Character selection using keys

Frequently asked questions

Press the start key, located on the right top of the machine, to start the scanner. Press it again to turn off the scanner.

The USB port is located on the middle top of the scanner. Connect the USB to your computer. The scanner will automatically start up.

The battery box is located on the back of the machine. Unscrew the securing screw and open the battery box cover. Replace the battery. Please use AA batteries.