CineView
HE
User Manual
Antenna x 9
In the Box
Q uad
5
3
1
2.4GHz+5GHz Dual-Band Transmission Technology
Latency Less Than 0.06s
Long-Distance Transmission of 1200 ft/350m
HDMI In and Loop-out, USB Video Class (UVC) Out
1 Transmitter for 4 Devices, Pick & Mix
No Fan Design
Power by DC Input, NP-F Battery & USB-C
Wireless Remote Monitoring App Accsoon Go
Automatic Channel Selection
Easy Group Pair
FHD Video and High-Quality Audio Transmission
Aerospace-Grade Aluminum Alloy
1.3 inch OLED Screen
Firmware Update with Ease
Quick Installation & Easy to Carry
CineView
HE
13
1.3 inch OLED Display
Menu (OK) Button
Group Setting Knob
HDM I In
Power On/Off Button
Right Button
DC Input
13 Antenna Connector (RP-SMA Male)
HDMI Out
Left Button
USB-C
Battery Lock
CineView
HE
13
1.3 inch OLED Display
Menu (OK) Button
Group Setting Knob
HDM I Out
Power On/Off Button
Right Button
DC Input
13 Antenna Connector (RP-SMA Male)
UVC Out
Left Button
USB-C
Battery Lock
Application
HDMI
Transmitter
1 2 3 4
Receiver Receiver Receiver Receiver
Receiver Receiver Receiver Android/iOS
(APP)
Receiver Receiver Android/iOS
(APP)
Android/iOS
(APP)
Receiver Android/iOS
（APP）
Android/iOS
（APP）
Android/iOS
（APP）
Note: These are four different mix and match combinations for you to choose from.
4
How to Install
1. Install the antennas as shown in the picture.
2. Use the cold shoe mount adapter to install the
CineView HE onto the camera or camera cage.
3. Use an NP-F970/F750/F550 battery, DC source or USB-C to power the CineView HE.
4. Connect camera HDMI to CineView HE.
Instruction
2
Power On/Off
Power On: Click the power on/off button
Power Off: Hold the power on/off button for 2 seconds.
3
Group Setting
1. CineView HE has a group setting knob on each transmitter and receiver. If the transmitter and receiver are set to the same group, they will be paired and connected automatically; otherwise, they will not be paired and connected.
2. If you want to connect multiple receivers (up to
4) to one transmitter at the same time, simply set all receivers and transmitters to the same group.
3. If you want to use more than one group for monitoring under the same application, you need to differentiate the settings of each group.
Note:
1. If you change the grouping settings after the product has been powered on, a reboot is required for the changes to take effect.
2. After changing the group setting, you need to reconnect the transmitter and receiver at close range, otherwise it may fail to pair and connect.
5
Instruction
4
OLED Display
Current group
Input audio information
Input video information
Battery level/DC input
Connection status
Current Channel
Connection Status:
Transmitter: the number of connected devices; “0" if none connected.
Receiver: “1" when connected to the transmitter; otherwise “0".
5
Data Rate Setting
How to:
Press the menu button to access “Data Rate Setting" → Press the left and right buttons to select → Press the menu button to activate the setting.
6
Channel Setting
1. Only the transmitter has the “Channel Setting" menu.
2. The default channel setting is Auto (A). CineView HE will automatically select the channel with the least interference when it is powered on.
(Note: It is recommended that users do not change this setting.)
3. If the user needs to change the channel, please: Press the menu button to enter “Channel Setting" → Press the left and right buttons to select →
Press the menu button to confirm → Select “Yes" → Press the menu button to confirm and the setting will take effect after reboot.
6
Instruction
7
Network Reset
1. Only the transmitter has the “Network Reset” menu.
2. Users can reset the WiFi SSID and password to factory settings by
“Network Reset” menu.
How to:
Press the menu button to enter “Network Reset” → Select “Yes” → Press the menu button to confirm → Select “Yes” → Press the menu button to reboot, the SSID and password of the 5G WiFi will be reset to factory settings.
8
App Monitoring
1. App download
Please download the App - Accsoon Go from Google Play Store or iOS
Apple Store.
2. Connect the CineView HE with the App
Open the WiFi settings on your mobile devices → Find “Accsoon_****” and select it → Enter the default password “ 12345678" to connect.
Note: **** refers to the four characters consisting of numbers and letters that are unique to each product.
Accsoon_****
Note:
CineView HE has two WiFi signals, one is 2.4G and another is 5G.
Please confirm that the mobile devices are connected to “Accsoon_ **** ".
Instruction
3. Monitoring
Once successfully connected, open the Accsoon Go App, select “CineView" and tap the “Monitor" button.
CineView
CineView
Note:
If you have any questions about using Accsoon Go App, please refer to Accsoon Go
App tutorial videos on Accsoon's official YouTube channel.
9
Livestream Setting
There are two ways of using CineView HE for live streaming.
1. Livestream via UVC out
①Only the CineView HE’s receiver has the UVC out.
②Use a Type-C cable (user-provided) to connect CineView HE’s receiver and mobile phone or computer, then do livestreaming via streaming platforms.
*The receiver will act as a live camera.
Note:
When using the UVC interface for live streaming, support from live streaming platforms is required, such as OBS or YouTube.
Instruction
2. Livestream via Accsoon Go
① Change CineView HE transmitter’s setting to speed mode
Press the menu button to access “Data Rate Setting”→ Use the right button to change to “speed mode” → Press the menu button to activate the setting.
② Move to Accsoon Go
Open Accsoon Go and tap the “live” → Enter streaming RTMP URL and code → Tap “Go Live”.
Note:
Please refer to the official website where you want to do live streaming for instructions on how to obtain your live streaming URL and code.
10
Firmware Update
1. Firmware download
Please ensure that your mobile devices can access the Internet via WiFi.
Open the Accsoon Go App, select “CineView'', then tap the “Firmware
Update" button. The App will automatically search for the latest firmware update on the server. Once a new firmware is available, tap “Download" to download the latest firmware to your phone.
WiFi Setting
CineView
Instruction
Note:
Before searching for the latest firmware, please confirm that your mobile device’s WiFi can access the Internet so that the App can search for the latest firmware from the server.
2. Update
Once the new firmware has been downloaded, connect your mobile devices to the CineView HE → Tap “Next” on Accsoon Go App to update.
Note:
1. Make sure the battery level of CineView HE is above 50% before updating.
2. No power cuts should occur during the upgrade process.
3. The CineView HE will reboot automatically when the update is complete.
4. If you have any questions during firmware update, please refer to “Accsoon Go App
Tutorial - Firmware update” video on Accsoon's official YouTube channel.
Specification
HDMI
HDMI Output
Format
DC Port
HDMI
HDMI Loop-out
1080p 23.98/24/25/
29.97/30/50/59.94/
60fps
1080p 23.98/24/25/
29.97/30/50/59.94/
60fps
5.5mmx2.1mm
center positive
HDMI
1080p 24/25/
30/50/60fps
DC Voltage
Audio
Latency
OLED Display
Transmission
Power
Transmission
Range
Power
Consumption
Operating
Environment
Temperature
Dimensions
(Antennas Not Included)
Weight
(Antennas Not Included)
7.4~16.8V
44.1KHz/48KHz
16bit/24bit PCM
＜0.06s
(Camera latency not included)
1.3 inch
17~20dBm
1.3 inch
1200ft
(No obstacles, no interference)
4.5 Watt
（Typical）
4.2Watt
(Typical)
200g
-10~40 ℃
105mmx66mmx32mm
200g
Warranty
1. If there is a quality problem that occurs within 15 days after receiving the product, Accsoon will provide complimentary maintenance or replacement.
2. Under proper use and maintenance, from the date of receipt, Accsoon will provide a one-year warranty on the wireless video transmission system and a three-month warranty on the accessories and cables. Free maintenance service is available during the warranty period.
3. Please keep the proof of purchase and the user manual in a safe place.
1. Out of warranty ( If the proof of purchase is not available, the warrenty will be calculated from the date the product is delivered from the factory).
2. Damage caused by use or maintenance is not following the requirements of the product manual.
3. Unauthorized repair, modification or disassembly.
4. Damage caused by force majeure such as fire, flood, lightning strike, etc.
1. Contact your local Accsoon authorized dealers for after-sales service. If there is no local authorized dealers, you can contact our customer service via our email ([email protected]) or website (www.accsoon.com) and get appropriate support.
2. You will get detailed solutions from the authorized dealers or Accsoon.
3. Accsoon reserves the right to review the damaged product.
2
3
1. Please make sure the transmitter and receiver are set to the same group.
2. Please check that the antennas are securely mounted.
1. Please check whether the HDMI cable of the camera is correctly plugged into the HDMI IN port of the transmitter.
2. Please check if the video format and other information are shown on the display interface; if not, please check the HDMI cable and see if the HDMI of the camera has a video output.
3. Please check if the HDMI video format of the camera is compatible with the formats supported by the product.
Choppy video
1. Please check that the antennas are securely mounted.
2. Please make sure there are no metals or cables around the antennas that can cause signal blocking.
3. Please switch to another channel manually.
Mobile devices can’t connect to CineView Quad
CineView HE has two WiFi signals, one is 2.4G and another is 5G.
Please confirm that the mobile devices are connected to “Accsoon_****".
App fails to find the latest firmware
1. Please check if the WiFi connection of your mobile device can access the internet properly.
2. Please check if the mobile device has automatically connected to the CineView HE's WiFi signal. If so, please change to another WiFi connection that can access the internet properly and try again.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
4
Contact Us
Accsoon Official User Group
[email protected]
