Motorola solutions ATS 2500p Quick Reference Card

m
Antenna
ATS 2500p
Digital Portable Radios
Quick Reference Card
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Accessory
Connector
Side
Button 2
Battery
Microphone
Main Display
Menu Select
Buttons
2 The display shows Emergency and the
Turning the Radio On/Off
• On – Rotate the On/Off/Volume knob
clockwise.
• Off – Rotate the On/Off/Volume knob
counterclockwise.
Back Button
Keypad
4-Way Navigation
Button
Sending an Emergency Alarm
1 Press and hold the Emergency button*.
Status
Indicator
Selecting Zones and Channels
Home Button
OR
Press and hold the Volume Set button.
OR
Press the Monitor button and listen for
activity.
receive.
Speaker
Side
Button 1
2 Listen for a transmission.
4 Press the PTT button to transmit; release to
Top (Orange)
Button
PTT
Button
1 Select zone or channel.
3 Adjust the volume, if necessary.
Radio Controls
Top Side
(Select) Button
Receiving and Transmitting
• Zone – Select the required zone using the
radio menu.
• Channel – Turn the Channel knob or select the
required channel using the radio
menu.
current zone/channel. Radio sounds a short,
medium-pitched tone, and the LED blinks red
momentarily.
3 When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
* Default timer of Emergency button press to
activate Emergency is 300 milliseconds. This
timer is programmable, see Emergency
Operation in the user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners. © 2018 by Motorola Solutions, Inc. All Rights Reserved. 07/18
1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.
*PMLN7937A*
PMLN7937A
English
k
Display Status Icons
Sending an Emergency Call
1 Press the Emergency button.
2 Press and hold the PTT button. Speak clearly
into the microphone.
3 Release the PTT button to end call.
To exit emergency at any time, press and hold
the Emergency button.
u
t
8
O
Sending a Silent Emergency Call
1 Press the Emergency button.
2 The display does not change; the LED does
not light up, and there is no tone.
Receiving a call or data.
The vote scan feature is enabled.
On steady = View mode
Blinking = Program mode
Transmitting a call or data.
Blinks when the battery is low.
Direct radio to radio communication or
connected through a repeater.
On = Direct
Off = Repeater
M This channel is being monitored.
is set at Low power.
H . LH == Radio
Radio is set at High power.
i Scanning a scan list.
OR
3 Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
To exit emergency at any time, press and hold
the Emergency button.
j
Blinking dot = Detects activity on the
Priority-One Channel
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
Menu Navigation
Press < or > to Menu Entry.
Press
{ or | directly below
Menu Entry to select.
Press H to exit.
English
Press U or D to scroll through sub-list.
Press
{ or | directly below
Menu Entry to select.