Symbol Spectrum24 Quick Reference Manual
PDF
Document
Advertisement
Advertisement
The Spectrum24 PCI adapter installation requires: • a computer with a PCI slot • a CDROM drive • an available interrupt (IRQ) • an available I/O port address • Spectrum24 driver installation CD Note: Installation and removal methods vary for different host devices. Refer to system documentation for information. Installation Before beginning the installation, verify the package contains: • Spectrum24 LA-41X3 PCI adapter • installation CD. Note: Verify the model indicated on the PCI adapter and packaging before use. Contact the Symbol Support Center if an item is missing or not functioning. Preparation The physical PCI adapter installation differs for each system. Refer to the system manufacturer documentation for specific information. Installing the PCI Adapter This Getting Started Guide contains LA-41X3 PCI adapter installation and configuration instructions for Windows 95/98 and NT. For instructions on using the Spectrum24 Plus Pack utilities, refer to the Spectrum24 Plus Pack Users Guide. Scope The Spectrum24 LA-41X3 PCI adapter allows PCI slot-equipped host systems to configure, connect to and establish a Spectrum24 wireless network. Features include: • Standard NDIS (Network Driver Interface Specification) drivers • Windows 95, 98, NT 4.0 and CE driver support • Plug and Play support • Card and Socket Services Support. Introduction The Spectrum24 Windows driver ships with the Network Control Panel Applet (NCPA) utility. Use NCPA to view and edit Spectrum24 LA-41X3 PCI adapter settings. Before installing the Spectrum24 Windows driver: • verify the Spectrum 24 LA-41X3 PCI adapter is installed • obtain the Spectrum24 Windows driver installation CD. Note: Symbol recommends updating the Spectrum 24 LA-41X3 PCI adapter to the latest firmware. Use the NICUpdate utility to update the firmware. Refer to the documentation shipped with the Spectrum24 Plus Pack utility suite for instructions about using NICUpdate. To download the latest firmware, go to (http://www.symbol.com/services/downloads/download_spec24.html). Installing and Configuring the Spectrum24 Driver in Windows 95/98 The PCI adapter includes a desktop antenna. To attach the antenna: 1. Attach the antenna cable to the antenna connector on the PCI adapter. The PCI adapter is ready to be configured. External Antenna Slot To install the PCI adapter: CAUTION! Use proper grounding for the environment when handling computer components. 1. Power off the computer before installing the adapter. If the system has a PCMCIA adapter installed, the PCI adapter can function as a second controller. Remove the computer cover. Locate an available PCI slot in the computer. Remove the retaining screw and bracket for the slot. Align the adapter with the slot and insert firmly. Verify the adapter seats into the slot evenly. 2. 3. 4. 5. Copyright Copyright © 2000 by Symbol Technologies, Inc. All rights reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Symbol. The material in this manual is subject to change without notice. Symbol reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication, estoppel, or otherwise under any Symbol Technologies, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Symbol products. Symbol, the Symbol logo and Spectrum24 are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. IBM is a registered trademark of International Business Machine Corporation. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Novell and LAN Workplace are registered trademarks of Novell Inc. Toshiba is a trademark of Toshiba Corporation. Patents This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,360,798; 4,369,361; 4,387,297; 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172 Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 Wireless LAN Adapter LA-41X3 PCI Adapter Quick Reference Guide Spectrum24 ® Symbol Technologies, Inc. One Symbol Plaza Holtsville, NY 11742-1300 *70-20746-02* 70-20746-02 Revision B www.symbol.com Installing the Driver in Windows 95 To install the driver for the first time in Windows 95: Note: The Spectrum24 Windows driver ships with the Symbol Network Control Panel Applet (NCPA) utility. Use NCPA to view and configure Spectrum24 LA-41X3 PCI adapter settings. Note: Launch the ricohinf.exe file from the Win9x directory before loading the driver. Restart the computer before loading the driver. 1. Install the Spectrum24 PCI adapter as described in the installation section. 2. Power up the system. 3. Insert the Spectrum24 Windows driver installation CD. 4. When Windows 95 recognizes the PCI adapter, an Update Device Driver Wizard dialog box appears requesting a driver to install. Click Next. 5. Click Finish when Windows displays the following message: Windows found the following updated driver for this device: Symbol Spectrum24 PCI adapter. Complete the installation instructions displayed by the Windows 95 operating system. 6. Enter the network ESSID in the Symbol Easy Setup window. Click OK. 7. Click Finish. 8. When prompted, reboot the computer. Installing the Driver in Windows 98 To install the driver for the first time in Windows 98: Note: The Spectrum24 Windows driver ships with the Symbol Network Control Panel Applet (NCPA) utility. Use NCPA to view and configure Spectrum24 LA-41X3 PCI adapter settings. 1. Install the Spectrum24 PCI adapter as described in the installation section. 2. Power up the system. 3. Insert the Spectrum24 Windows driver installation CD. 4. When Windows 98 recognizes the PCI adapter, the Add New Hardware dialog box appears. Click Next. 5. Select Search for best driver for your device. Click Next. 6. Select the location of the installation CDROM. Click Next. 7. Click Next when Windows displays Spectrum24 WLAN PCI Adapter. 8. Enter the network ESSID in the Symbol Easy Setup window. Click OK. 9. Click Finish. 10.When prompted, reboot the computer. Configuring the LA-41X3 PCI Adapter for Windows 95/98 To configure the PCI adapter for Windows 95/98 support: 1. From the Windows 95/98 Control Panel, select Network and select Symbol PC Card. Click on the Properties tab. 2. From the Symbol Easy Setup window, click the Advanced button to view the PCI adapter settings. Use the NCPA Mobile Unit, Mobile IP, Encryption and WLAN Adapter tabs to view or adjust the adapter configuration settings. 3. Exit and save the configuration settings by clicking OK or Finish. Select Cancel to use the default settings. 4. Restart the system for the changes to take effect. Installing and Configuring the Spectrum24 Driver in Windows NT The Spectrum24 Windows driver ships with the Network Control Panel Applet (NCPA) utility. Use NCPA to view and edit Spectrum24 LA-41X3 PCI adapter settings. Before installing the Spectrum24 32-bit Windows driver: • verify the Spectrum 24 LA-41X3 PCI adapter is installed • obtain the Spectrum24 Windows driver installation CD Symbol recommends updating the Spectrum 24 LA-41X3 PCI adapter to the latest firmware. Use the NICUpdate utility to update the firmware. Refer to the documentation shipped with the Spectrum24 Plus Pack utility suite for instructions on using NICUpdate. To download the latest firmware, go to (http://www.symbol.com/services/downloads/download_spec24.html). Installing the Driver in Windows NT To install the driver for the first time in Windows NT: Note: The Spectrum24 Windows driver ships with the Symbol Network Control Panel Applet (NCPA) utility. Use NCPA to view and configure Spectrum24 adapter settings. 1. Install the PCI adapter as described in the installation section. 2. Power up the system. 3. Insert the Spectrum24 Windows driver installation CD. 4. From the Windows NT Control Panel, select Network. 5. Select the Adapters tab. Click Add. 6. Click Have Disk. 7. Enter the drive letter assigned to the CD drive. Click OK. 8. When the Select OEM Option dialog box appears, select the Symbol PCI adapter. Click OK. 9. Enter the network ESSID in the Symbol Easy Setup window. Click OK. The Network dialog box appears. 10.Click Close, and complete the installation instructions displayed by the Windows NT operating system. 11.Reboot the computer when prompted by Windows NT. Configuring the LA-41X3 PCI Adapter for Windows NT To configure the PCI adapter for Windows NT support: 1. From the Windows NT Control Panel, click on the Network icon, select the Adapters tab and select Symbol PC Card. Click on the Properties tab. 2. From the Symbol Easy Setup window, click the Advanced button to view the PCI adapter settings. Use the NCPA Mobile Unit, Mobile IP, Encryption and WLAN Adapter tabs to view or adjust the adapter configuration settings. 3. If necessary, configure the hardware and radio parameters. 4. Click OK or Close to exit and save the configuration settings. 5. Remove the Spectrum24 driver installation CD and follow the remaining instructions. 6. Reboot the computer when prompted by Windows NT. Troubleshooting If problems are encountered during the installation of the adapter or driver, refer to Spectrum24 Wireless LAN Models LA-41X1 PC Card & LA-41X3 PCI Adapter Product Reference Guide or contact the Symbol Support Center (1-800-653-5350). Specifications The LA-41X3 PCI adapter has the following specifications: • Dimensions: 6 inches x 5 inches • Weight: 4.3 oz • Operating Temperature: 32° to 100° • Humidity: 95% maximum non condensing • Altitude: Storage - 15,000 ft. (4.6 km) Operating - 8,000 ft. (2.4 km) • Shock: 40 G, 11mS, half sine Customer Support Symbol Technologies provides its customers with world-class customer service and technical support. The Symbol Support Center operates as the single point of contact for any technical problem, question or support issue. The Support Center operates all year, 24 hours a day, staffed by full-time professional Technical Specialists. If Symbol cannot solve the problem immediately within its tiered, technical-support center, access to all technical disciplines within Symbol become available for further assistance and support. First response / contact within 24 hours or one business day. Responses by email, fax or telephone. North American Contacts Inside North America, contact Symbol at: Symbol Technologies, Inc. One Symbol Plaza Holtsville, New York 11742-1300 Telephone: 1-516-738-2400 / 1-800-SCAN 234 Fax: 1-516-738-5990 Symbol Support Center: Telephone: 1-800-653-5350 Fax: (516) 563-5410 Email: [email protected] International Contacts Outside North America, contact Symbol at: Symbol Technologies Technical Support 12 Oaklands Park Berkshire, RG41 2FD, United Kingdom Tel: 011-44-118-945-7000 or 1-516-738-2400 ext. 6213 Additional Information Obtain additional information by contacting Symbol at: 1-800-722-6234, inside North America +1-516-738-5200, in/outside North America http://www.symbol.com/ ">
/
Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Advertisement