KaVo Leica M320 Instructions for Use

Medic al Division
Leica M320
User Manual
10 718 878 - Version 01
Thank you
for deciding in favor of a Leica surgical microscope system. For valuable information about
Leica Microsystems products and services and the address of your nearest Leica
representative, please visit our website:
www.leica-microsystems.com
Leica Microsystems (Schweiz) AG
Medical Division
Max Schmidheiny-Strasse 201
CH-9435 Heerbrugg
Phone: +41 71 726 3333
Fax: +41 71 726 3334
Product identification
The model code and serial number of your product are provided on the nameplate found on
the underside of the control unit. Copy this information to the line below so that it is handy in
case you have questions for our representatives or service locations.
Type:Serial number:
Contents
Leica M320 / Ref. 10 718 878 / Version 01
1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4.12Installing the drape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.2Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4.13External orange filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.3 Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.4 Required tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
5.1 Balancing the swing arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.2 Transporting the microscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.1User profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.3Starting up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.2Safety notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.4Additional settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.3Directions for the operator of the instrument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6Video Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.4Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6.1Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6.2SD memory card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.1Stands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6.3 Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.2Swing arm and horizontal arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6.4 Graphical user interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.3Optics carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6.5Acquisition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.4 Microscope carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7
Taking the Surgical Microscope out of Operation. . . . . . . . . . . . . . . . . . . . . . . 49
3.5 Brake knobs/articulation brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.6Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8Care and Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
8.1 Maintenance instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8.2Changing fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.1Installing the accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2Documentation output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3Handles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.4ErgonOptic Dent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.5ErgoWedge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.6Objectives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.7 Protective glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.8 Binocular tubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.9Eyepieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.10Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.11 Mounting sterile components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
9.1Microscope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
9.2Video camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
10Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1Introduction
Leica M320 / Ref. 10 718 878 / Version 01
1.1Basics
1.3Symbols
Be sure to read the User Manual and the "Safety Notes" chapter carefully before assembling
and operating the product.
1.3.1 In the manual
Keep the manual close to the instrument.
1.2Intended use
The Leica surgical microscope is an optical instrument for magnifying and illuminating
specimens. It can be applied for observation and documentation and for human and
veterinary medical treatment.
The Leica surgical microscope may be used only in closed rooms and must be placed on a
­solid floor or attached to a strong wall or ceiling.
Not for use in eye operations!
The Leica M320 surgical microscope is subject to special precautionary measures for
electromagnetic compatibility. It must be installed and commissioned in accordance with the
guidelines and manufacturer's declarations and recommended safety distances (tables 1, 2, 4,
6 a­ ccording to EN 60601-1: 2007).
Portable and mobile as well as stationary HF communications equipment can have a negative
effect on the reliability of the Leica M320 surgical microscope.
Warning
Can cause death or severe injury.
CAUTION
Can cause minor injury.
NOTE
Can cause property damage.
INFO
Information that is not safety-related, but is useful or important.
1.3.2 On the instrument
Caution, follow the User Manual
Alternating current
European Conformity logo
1.4 Required tools
Allen key:
-- Size 2.5 for installing accessories (dovetail interface)
-- Size 3 for optimizing the balance of the optics carrier
-- Size 4 for handle holder
-- Size 8 for balancing the swing arm
Provided brake knob
1
2Instructions
2
2.1User profiles
2.2Safety notes
Responsible body
Person or company responsible for the use and maintenance of the surgical microscope
­(hospitals, physician's practices).
Information for the person responsible for the instrument/authorized trained
personnel
Users
Physicians and trained medical personnel with appropriate qualifications who have been
­instructed in the use of the instrument. Specific training is not required.
Authorized trained personnel
Authorized electricians or other technicians expressly authorized by Leica with corresponding
training.
-- The surgical microscope may be used by qualified users only.
-- Regularly check to make sure the users are complying with safety requirements.
-- Provide comprehensive instructions and explain the warning messages.
-- Assign and monitor responsibilities for commissioning, operating and maintenance.
-- Use the surgical microscope in proper condition only.
-- Do not place the drape to close to the instrument, as otherwise it can overheat and shut off.
-- Inform your Leica representative or Leica Microsystems (Schweiz) AG immediately if you
­detect a product defect that could potentially cause injury or harm.
-- Use original accessories or approved Leica accessories only.
-- Use only high-quality HDMI cables with a maximum length of 15 m.
-- Use only monitors approved for medical purposes or equipped with an isolating transformer.
-- Modifications or repairs may be carried out by authorized trained personnel only.
-- Use only original Leica parts in maintenance work.
-- After maintenance or technical modifications, readjust the instrument in accordance with
our technical specifications.
-- If the instrument is modified by or maintenance has been performed by unauthorized
personnel, if the equipment is improperly maintained or if the instrument has been
operated improperly, Leica disclaims all liability.
-- The owner or operator shall be held liable for the function of the system if the system has
been assembled incorrectly by individuals who do not belong to Leica Microsystems
(Schweiz) AG.
-- The influence on other devices by the Leica M320 surgical microscope has been tested in
­accordance with EN 60601-1-2. The system passed the emissions and immunity test. The
standard preventive measures and safety regulations pertaining to electromagnetic and
other radiation have to be observed.
2Instructions
Leica M320 / Ref. 10 718 878 / Version 01
2.3Directions for the operator of the instrument
-- Follow the User Manual.
-- Follow the instructions given by your employer regarding the organization of work and
­safety at work.
-- Do not modify the surgical microscope.
-- Danger of tilting of the floor stand! When moving the floor stand, fold up the swing arm as
described above and tighten the articulation brakes.
-- Risk of injury from moving parts! Assemble and balance the accessories before the operation.
Do not install it above the field of operation.
-- Risk of injury from rolling of the floor stand! Always push the microscope to move it; never pull it.
Do not roll it over anyone's feet. Do not roll over cables lying on the floor. Lock the foot brakes
during the operation, and never move the device during operation.
-- Do not shine lights in anyone's eyes.
-- Do not cover up the ventilation slot of the optics carrier.
-- Before an extended period of non-use, remove the battery from the remote control.
2.4Disposal
The respective applicable national laws must be observed for disposal of the products,
with the involvement of corresponding disposal companies.
The unit packaging is to be recycled.
3
3Controls
4
3.1Stands
NOTE
To assemble the stand, note
the installation instructions
provided.
Rolling floor stand (F12),
long swing arm
Rolling floor stand, short
swing arm
Wall stand (W12)
Ceiling mount (C12)
Table stand with terminal
(TC12)
Wall stand (LW12)
Table stand with plate (TP12)
Standard for operating manual
Floor stand/baseplate (FP12)
3Controls
Leica M320 / Ref. 10 718 878 / Version 01
3.2Swing arm and horizontal arm
Integrated tilt switch
INFO
The integrated tilt switch is
not available for models TC12,
TP12 and LW12.
Swing arm and horizontal arm
Move the swing arm upwards.
Light switches off automatically.
5
3Controls
6
3.3Optics carrier
INFO
Caps for magnification changer
are steam- or gas-sterilizable.
Magnification changer,
both sides, increments:
6.4, 10, 16, 25, 40×
Illumination control for
­illumination intensity.
Filter and diaphragm controls
for white light, orange filter
and spot illumination.
3.4 Microscope carrier
INFO
INFO
Two different versions are
available.
Upright installation is not
possible for models TC12,
TP12 and LW12.
Inclined
Upright
Types of counterweight for
balancing when many
accessories are used.
3Controls
Leica M320 / Ref. 10 718 878 / Version 01
3.5 Brake knobs/Articulation brakes
Articulation brake
Lever for locking the vertical
position
Joint for balancing
Articulation brake
Articulation brake
Articulation brake
(LW12, TP12, TC12)
Tilt brake
Rotary brake
(inclined version)
7
3Controls
8
3.6Connections
Brake knob for setting the
­articulation brakes
Main switch
Power socket
Port for HDMI/USB cable
4Accessories
Leica M320 / Ref. 10 718 878 / Version 01
4.1Installing the accessories
CAUTION
Risk of injury from downward
movement of the swing arm!
Before installing accessories,
tighten the articulation brakes.
See "5.3 TRANSPORTING THE
MICROSCOPE".
INFO
1
2
3
Installing the accessories, for
example, ErgonOptic Dent.
Install any other accessories
in a similar manner.
Unscrew the clamping screw.
Push the accessory into the
dovetail interface.
Tighten the clamping screw.
4.2Documentation output
C-mount port for commercially
available video camera
9
4Accessories
10
4.3Handles
4.3.1 Installing and removing the front handle
NOTE
Installing the front handle
­before the rest of the
accessories.
INFO
1
2
3
Gray handle sleeves are
steam- or gas-sterilizable.
White handle sleeves can be
disinfected.
Screw on the handle sleeve
holder.
Insert until the handle sleeve
clicks into place.
Push the knob and release
the handle sleeve.
4.3.2 Installing the side handles
1
Screw the handle apart.
2
Remove cover with key.
3
Screw open the bottom
holder for the handle.
Handle tilt is individually
­adjustable.
4
Refit the handle sleeve holder.
5
Insert until the handle sleeve
clicks into place.
4Accessories
Leica M320 / Ref. 10 718 878 / Version 01
4.4ERGONOPTIC DENT
INFO
Improves ergonomics at
­certain working positions:
Turning range 45° with 180°
binocular tube.
ErgonOptic Dent: Optical
extension for more
comfortable work.
For installation, see "4.1
­Installing the accessories".
ErgoWedge
Ideal in combination with 45°
inclined binocular tube.
4.5Ergowedge
INFO
The ErgoWedge gives a
­binocular with a fixed angle a
variable viewing angle of 5°
to 25°.
For installation, see "4.1
­Installing the accessories".
11
4Accessories
12
4.6Objectives
INFO
1
2
3
Fixed and fine objectives
available in various focal
lengths.
Remove the cover from the
optics carrier.
Screw in the objective.
Fine focusing objective:
The nose points forward.
Fixed objective:
The nose points 90° towards
the left or right.
4.7 Protective glass
INFO
The protective glass is used to
protect the objective. The
glass is steam- or gassterilizable.
Turn the fine focusing
objective for fine focus.
4Accessories
Leica M320 / Ref. 10 718 878 / Version 01
4.8 Binocular tubes
Binocular tube 5° - 25°
Inclined binocular tube
Binocular tube, 180° variable
Straight binocular tube
Binocular tube, variable
30° - 150°
4.9Eyepieces
INFO
Inclined binocular tube 45°
For installation, see "4.1
­Installing the accessories".
Possible eyepieces:
-- 10× eyepiece, standard
(aside from with straight
tube 12.5×)
-- 10× eyepiece with crosshair
graticule for easier image
centering
-- 12.5× eyepiece, shows image
with similar magnification to
that on the screen
1
Set the eyepiece in place.
2
Tighten the rotary ring.
13
4Accessories
14
4.10Adapter
NOTE
1
3
2
4
The microscope is not
­balanced. To prevent it from
tipping over, tighten the
­articulation brakes.
Install the stereo adapter.
5
Fit the beam splitter.
For 50/50 % or
70/30 % observation.
NOTE
For installation, see "4.1
­Installing the accessories".
Turn the white ring to align
the cutout for the assistant.
Install the stereo attachment
for second observer on the
left side.
Fit the binocular tubes.
4Accessories
Leica M320 / Ref. 10 718 878 / Version 01
4.11 Mounting sterile components
CAUTION
INFO
Danger of infection!
Avoid touching the sterile
components. Allow sufficient
free space.
1
2
3
Do not install the sterile
components until shortly
before the operation.
Handle sleeves and caps for
the magnification changer
are steam and gas-sterilizable.
Sterilize the handle sleeves
and caps after use.
Insert until the handle sleeve
clicks into place.
Attach the caps.
Attach protective glass on
objective. The noise points
forwards (fine focus
objectives) or 90° to the left/
right (fixed objectives).
4.12Installing the drape
CAUTION
cm
20 
Do not wrap the drape around
the microscope too tightly.
The distance between the
microscope and drape should
be 20 cm. Danger of
overheating!
Fit the drape.
15
4Accessories
16
4.13External orange filter
NOTE
INFO
Filters out the parts of the light
spectrum that cause rapid
­curing of dental composite.
For installation, refer to the
separate Assembly
Instructions provided.
External orange filter:
additional accessory for
­dentistry.
5Settings
5.1
Leica M320 / Ref. 10 718 878 / Version 01
Balancing the swing arm
1
Remove the screw.
6
Refit the side cover.
2
Remove the side cover.
7
Fasten the screw.
3
Remove the screws.
8
Turn the lever for locking the
vertical position.
4
Set the desired position.
Four different positions can
be set.
5
Fasten the screws.
9
Adjust the balancing joint to
the weight using an Allen key
(size 8).
17
5Settings
18
5.2 Transporting the microscope
CAUTION
1
2
3
4
Risk of injury from outward
movement of swinging arm!
Transport the microscope in
transport position.
Place swing arm in a horizontal
position.
5
Open the articulation brake.
6
Fold the swing arm together.
Tighten the articulation brake.
Turn the lever for locking the
vertical position.
7
Compare the position of the
swing arm with the attached
sign.
Turn the optics/microscope
carrier towards the outside.
Tighten the articulation
brake.
5Settings
NOTE
Leica M320 / Ref. 10 718 878 / Version 01
8
9
Possible damage of the cable!
Always pull the plug, never
the cable.
10
Risk of injury to feet!
Always push the instrument
to move it; never pull it.
Unplug the power cable.
CAUTION
CAUTION
Release the foot brakes.
Push the microscope to the
installation location and
­position it.
11
Danger of microscope rolling
away on its own!
Tighten the foot brakes.
Tighten the foot brakes.
19
5Settings
20
5.3STARTING UP
Warning
Risk of death from electrical
shock!
Connect the microscope to a
grounded socket only.
INFO
The length of the HDMI cable
must not exceed 15 m. Use
only high-quality HDMI
­cables.
HDMI cables are available
from Leica.
1
Remove cover of the
­horizontal arm.
2
Plug the power cable into the
horizontal arm and fasten it
using cable ties.
INFO
Image output: Resolution is
always in HD format
(720p/1080i/1080p). Check to
ensure that the monitor is
compatible with the HD
­standard.
3
Plug the HDMI cable and USB
cable (optional) into the
horizontal arm and fasten it
using cable ties.
INFO
Use only monitors approved
for medical purposes or
equipped with an isolating
transformer. Isolating
transformers are available
from Leica.
4
Screw in the cover of the
horizontal arm and tighten it.
5
Connect the HDMI cable to a
suitable monitor or screen.
5Settings
6
Connect the USB cable to the
computer.
Leica M320 / Ref. 10 718 878 / Version 01
7
Connect the power cable.
8
Switch on the main switch.
Main switch lights up in green.
9
White LED illumination on the
optics carrier lights up.
21
5Settings
22
5.4Additional settings
5.4.1ADJUSTING THE DESIGN LED ILLUMINATOR
INFO
1
2
3
4
There are five different
­dimming levels.
Switch on the main switch.
Main switch lights up in green.
5.4.2Adjusting the working distance
1
Coarse focus by raising and
lowering the microscope.
2
Fine focus via optional fine
focusing objective.
Remove cover of the
horizontal arm.
Using a ball-point pen or
similar object, press the
switch until the desired
dimming level is reached.
Screw in the cover of the
horizontal arm and tighten it.
5Settings
Leica M320 / Ref. 10 718 878 / Version 01
5.4.3Adjusting the illumination
Warning
1
2
Danger of retinal damage!
Do not shine lights in
anyone's eyes.
Set the desired illuminance.
Select the desired filter or
­diaphragm function:
White light
Orange filter
Spot illumination
5.4.4Adjusting the interpupillary distance
1
Look into the eyepieces.
Depending on the model,
move the tube manually or
using the drive knob until a
circular field is visible.
23
5Settings
24
5.4.5Adjusting the parfocality with camera and monitor
INFO
1
2
3
Parfocal means that the
sharpness remains constant
over the entire magnification
range.
Adjust the diopter settings for
both eyes separately and
accurately.
Place a piece of paper with
writing on it under the
­objective.
Maximum magnification
(40×)
Bring the writing on the sheet
of paper into sharp focus on
the monitor.
Adjusting the diopter settings
4
Without looking into the
eyepieces, set the minimum
magnification (6.4×).
The image on the monitor
must remain sharp!
5
Turn the dioptric correction
on the eyepieces to "+5".
6
Look into the eyepieces.
Rotate each eyepiece
individually clockwise, in the
"–5" direction, until each eye
sees the writing in sharp
focus.
7
Set maximum magnification
(40×).
5Settings
8
Leica M320 / Ref. 10 718 878 / Version 01
9
INFO
The writing should now
­remain sharp when you
change the magnification.
If it does not, repeat the
­procedure.
Bring the writing on the sheet
into focus.
Turn out the eyecups to the
desired distance.
25
5Settings
26
5.4.6Adjusting the parfocality without camera and monitor
Personal diopter setting known:
INFO
1
Parfocal means that the
sharpness remains constant
over the entire magnification
range.
Adjust the diopter settings for
both eyes separately and
accurately.
Set dioptric correction on
eyepieces.
Personal diopter setting known:
1
Adjust the dioptric setting at
the eyepiece to 0.
2
Place a piece of paper with
writing on it under the
­objective.
3
Set maximum magnification
(40×)
4
Bring the writing on the sheet
of paper into focus.
5Settings
5
Without looking into the
­eyepieces, set the minimum
magnification (6.4×).
Leica M320 / Ref. 10 718 878 / Version 01
6
Turn the dioptric correction
on the eyepieces to "+5".
7
Look into the eyepieces.
Rotate each eyepiece
individually clockwise, in the
"–5" direction, until each eye
sees the writing in sharp
focus.
8
Set maximum magnification
(40×).
9
Turn out the eyecups to the
desired distance.
INFO
The writing should now
remain sharp when you
change the magnification.
If it does not, repeat the
­procedure.
27
6Video Camera
28
6.1Information
6.1.1Standard delivery
-- Remote control
-- SD card (8 GB or similar)
Optional accessories:
-- USB (A-B) cable, 1.8 m
-- USB with Repeater cable, 10 m
6.1.2Requirements
-- HDMI port: HDMI-capable screen or television set to the HD ready
(720 p) or Full-HD (1080 p) standard.
and/or
-- USB port: Computer with USB connector
6.1.3Effective displayed section
INFO
The live image and captured
image do not show the same
section one sees when
looking through eyepieces.
To simplify image centering,
install 10.5× eyepiece with
crosshair graticule.
10× eyepiece
12.5× eyepiece
4:3 aspect ratio
16:9 aspect ratio
4:3 section
16:9 section
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
6.2SD Memory card
1
INFO
An SD memory card cannot be
formatted in the video camera.
Format it at a computer or
external digital camera.
The video camera is designed for
SD memory cards up to 32 GB.
Leica recommends SD memory
cards from Kingston or SanDisc
(Speed Class 4 or better).
Push down the cover flap.
2
Insert the SD memory card
into the video camera.
3
Push in the SD memory card
and remove it.
6.3 Remote control
6.3.1Changing the battery
Changing the battery
1
Remove the battery insert
from the rear side.
2
Replace the battery.
(Button battery type CR2032)
29
6Video Camera
30
6.3.2Overview
1 Perform white balance adjustment
2Save still image to SD Card
1
7
2
8
3
9
4
10
11
5
5
6
10
3 Thumbnail mode / live view mode
4 Perform remote control pairing
5Arrow keys for navigation
6Enter / exit Camera Menu
7Start / stop video recording
8 Freeze live view / pause video
9Show / hide information menu
10Arrow keys for navigation
11OK / confirm
6.4 Graphical user interface
6.4.1Camera menu
1
Point the remote control
­towards the camera..
2
Call up the Camera Menu
button.
with
3
Navigate with arrow keys.
4
Press
to confirm.
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
6.4.2Color (white balance)
INFO
Use neutral white or gray color chart for manual white balance adjustment.
Manual White Balance (recommended)
Manual white balance can be set by:
1. Lay a neutral white paper or gray chart under the focus of the microscope.
Press WB on the remote control.
COLOR
SET WB
PRESS OK
EXPOSURE
WB MODE
MANUAL
RESOLUTION
RED LEVEL
039
SETUP CAMERA
BLUE LEVEL
039
SETUP USER
BLACK LEVEL
000
2. Lay a neutral white paper or gray chart under the focus of the microscope. Select
. Adjust ‘RED LEVEL’, ‘BLUE LEVEL’, and ‘BLACK LEVEL’ as needed.
“Set WB” and press
SET FILENAME
SET WB
PRESS OK
WB MODE
MANUAL
RED LEVEL
039
BLUE LEVEL
039
BLACK LEVEL
000
3. Select “MANUAL” under WB mode. Adjust ‘RED LEVEL’, ‘BLUE LEVEL’,
and ‘BLACK LEVEL’ as needed.
Automatic White Balance
Color
Set WB
Exposure
WB Mode
Resolution
Red level
039
Setup Camera
Blue level
039
Setup User
Black level
000
SET FILENAME
Press OK
Auto
Select “AUTO” for automatic white balance adjustment.
White balance is adjusted automatically in real-time.
Adjust the “BLACK LEVEL” as needed.
31
6Video Camera
32
6.4.3EXPOSURE
Manual exposure
Color
EXP Mode
Manual
Exposure
EXPOSURE
067
Resolution
GAIN
067
Setup Camera
BRIGHTNESS
077
Setup User
GAMMA
Set FILENAME
ALC
Select "MANUAL" for manual exposure.
Correct the values for "EXPOSURE", "GAIN", and "GAMMA".
0.40
NO MASK
Automatic exposure (Recommended)
Color
EXP Mode
Exposure
EXPOSURE
067
Resolution
GAIN
067
Setup Camera
BRIGHTNESS
077
Setup User
GAMMA
SET FILENAME
ALC
Auto
Select "AUTO" for automatic exposure.
Correct the values for "BRIGHTNESS" and "GAMMA".
0.40
NO MASK
Automatic Light Control (ALC)
Color
EXP Mode
Exposure
EXPOSURE
067
Resolution
GAIN
067
Setup Camera
BRIGHTNESS
077
Setup User
GAMMA
SET FILENAME
ALC
Auto
1.40
NO MASK
For automatic exposure, 5 types of “ALC” can be selected:
“NO MASK”, “GRID”, “S CIRCLE”, “M CIRCLE” and “L CIRCLE”
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
INFO
No Mask
The exposure is automatically adjusted based on the entire image seen
on the screen.
Grid
The exposure is automatically adjusted based on the grid(s) selected.
S Circle
The exposure is automatically adjusted based on the small sized circle
(“S CIRCLE”), as indicated on the screen.
M Circle
The exposure is automatically adjusted based on the medium sized circle
(“M CIRCLE”), as indicated on the screen.
L Circle
The exposure is automatically adjusted based on the large sized circle
(“L CIRCLE”), as indicated on the screen.
33
6Video Camera
34
6.4.4RESOLUTION
LIVE
Color
LIVE
HD 1080-25
Exposure
CAPTURED
10.0MP-JPG
Resolution
MOVIE
HD 1080-MP4
Setup Camera
Select the resolution for live view:
(16×9 mode)
HD720p50, HD720p60, HD1080p25, HD1080p30,
HD1080i50, HD1080i60.
(4×3 mode)
720p50-4×3,720p60-4×3,1080i50-4×3,1080i60-4×3.
Setup User
SET FILENAME
CAPTURED
Color
LIVE
Exposure
CAPTURED
Resolution
MOVIE
HD 1080-MP4
Color
LIVE
HD 1080-25
Exposure
CAPTURED
10.0MP-JPG
Resolution
MOVIE
HD 1080-MP4
HD 1080-25
10.0MP-JPG
Select resolution for still image:
2.5 MP, 5.0 MP,10.0 MP.
Setup Camera
Setup User
SET FILENAME
MOVIE
Setup Camera
Setup User
SET FILENAME
Select resolution for video file:
HD1080, HD720.
6Video Camera
INFO
If a resolution cannot be displayed
and the HD monitor remains black,
you can do the following to display
a live image again in the HD
monitor:
Leica M320 / Ref. 10 718 878 / Version 01
Use the tip of a ball-point pen (or a bent paperclip) to press the hidden button:
Pressing the button for the first time displays the current live image resolution
on the HD monitor.
Pressing it a second time switches to the next live image resolution and a
signal tone is output.
Repeat the last step until a live image is displayed. The camera can activate
10 different resolutions in sequence.
35
6Video Camera
36
6.4.5SETUP CAMERA (VIDEO CAMERA SETTINGS)
CAPTURE MODE
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Select the still image capture mode:
Normal:Normal capture mode (Recommended)
High Sens: High sensitivity mode. This option helps to capture sharper image
when the object is moving
Burst:
3 images will be captured consecutively
SET DATE/TIME
Set the date/time and select the format:
“DMY” =Day/Month/Year, 24 h
“MDY” = Month/Day/Year, 12 h (AM/PM)
“YMD” =Year/Month/Day, 24 h
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
SHOW DATE/TIME
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Select the option for Show Date/Time:
LIVE ONLY:Date/Time in live view only
IMG ONLY:Date/Time in still captures only
LIVE + IMG:Date/Time in live view + still captures
SHOW FILENAME
Select the option for Show Filename:
LIVE ONLY:
Filename in live view only
IMG ONLY:
Filename in still captures only
LIVE + IMG:
Filename in live view + still captures
37
6Video Camera
38
FLIP IMAGE
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Select the option for the image orientation:
0°
Original orientation
Image is mirrored horizontally
Image is mirrored vertically
180°
Image is rotated 180°
AUDIO/BEEP
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Select “ON” to have audio signal when capturing still images or initiating video
recordings.
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
LEICA LOGO
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Color
CAPTURE MODE
NORMAL
Exposure
set DATE/TIME
Press ok
Resolution
SHOW DATE/TIME
none
Setup Camera
SHOW FILENAME
NONE
Setup User
FLIP IMAGE
0°
SET FILENAME
AUDIO/BEEP
ON
LEICA LOGO
NONE
RESET CAM
Press ok
Select the option for Leica Logo:
1. NONE :No Logo display
2. LIVE ONLY :Logo in live view only
3. IMG ONLY :Logo in still captures only
4. LIVE + IMG:Logo in live view + still captures
RESET CAMERA
Press
to restore all settings of the video camera to the factory settings.
39
6Video Camera
40
6.4.6SETUP USER (USER-DEFINED SETTINGS)
MENUE COLOR
Color
Menu color
DEFAULT
Exposure
Show capture
Resolution
Show menu
Setup camera
LANGUAGE
ENGLISH
Color
Menu color
DEFAULT
Exposure
Show capture
Resolution
Show menu
Setup camera
LANGUAGE
ENGLISH
Color
Menu color
DEFAULT
Exposure
Show capture
Resolution
Show menu
Setup camera
LANGUAGE
OFF
Select color scheme for menu:
“LEICA/LAS “ : red
“DEFAULT” :blue
05 sec
Setup user
SET FILENAME
SHOW CAPTURE
OFF
05 sec
Select the display mode & display duration of the image after it is captured:
“OFF”, “FULL-1SEC”, “PIP-1SEC”, “FULL-3SEC”, “PIP-3SEC”, “PIP-INFI”.
FULL: : Full screen
PIP: : Picture in picture
Setup user
SET FILENAME
SHOW MENUE
Setup user
SET FILENAME
OFF
15 sec
ENGLISH
Select the display duration of the Camera Menu on the screen:
“5 SEC “, “10 SEC “, “15 SEC “, “20 SEC “, “25 SEC “, “30 SEC “
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
LANGUAGE
Color
Menu color
Exposure
Show capture
Resolution
Show menu
Setup camera
LANGUAGE
DEFAULT
OFF
05 sec
ENGLISH
Select the language.
Setup user
SET FILENAME
6.4.7SET FILENAME
Color
Exposure
M 320
Set the first 4 characters of the filenames for still captures and the video
recordings.
Resolution
Setup camera
Setup user
SET FILENAME
INFO
All the files will be saved in one folder, where the name of the folder is be
generate based on the file name set.
For example:Set Filename = M320
Filename = M32000001.JPG.
Folder name = 100M320_
41
6Video Camera
42
6.4.8QUICK MENU
FILE TRANSFER MODE
1
QUICK MENU
FILE TRANSFER
Press
to call up the “QUICK MENU”.
Select “FILE TRANSFER MODE”, and press
.
INFO
In “FILE TRANSFER MODE”, the SD card will appear as ‘Removable Disk’ on the PC, and
files can be copied from the SD card and pasted to the local PC.
SET FILENAME
1
QUICK MENU
SET FILENAME
Select “SET FILENAME” to enter “SET FILENAME” menu.
QUICK MENU
LENS SHADING
Select “LENS SHADING” and press .
Select the lens shading setting based on the actual magnification used:
6.4×, 10.0×, 16.0×, 25.0×, 40.0×.
LENS SHADING
1
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
6.4.9AUTOMATIC LIGHT CONTROL (ALC)
1
ALC
NO MASK
Press
to select the ALC mode:
“NO MASK”, “GRID”, “S CIRCLE”, “M CIRCLE”, OR “L CIRCLE”
CAPTURE MODE
NORMAL
Press
to select the capture mode:
“NORMAL”, “HIGH SENS” or “BURST”
6.4.10CAPTURE MODE
1
43
6Video Camera
44
6.5Acquisition
6.5.1Images
1
Press
on the remote
control or on the video
camera still images.
A signal tone sounds.
2
3
4
2. Entering “FILE TRANSFER
MODE” and the SD card will
appear as “Removable Disk”
on the computer.
Files can be transferred to PC
by:
1. Removing the SD card from
the camera and insert the SD
card into the SD card reader
on the computer.
6.5.2Videos
1
Press
on the remote
control or
on the video
camera to initiate video
recordings.
A signal tone sounds.
To end the video recording,
press
on the remote
control or
on the video
camera. A signal tone sounds.
2
Files can be transferred to PC
by:
1. Removing the SD card from
the camera and insert the SD
card into the SD card reader
on the computer.
3
Transfer the video to a
computer using the SD card
reader.
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
4
INFO
You can show and hide the
timer using the key.
2. Entering “FILE TRANSFER
MODE” and the SD card will
appear as “Removable Disk”
on the computer.
6.5.3Viewing images
1
Press
mode.
2
to enter thumbnail
Navigate by using the arrow
keys.
Press
to select the image.
3
4
Image selected will be
displayed in full screen.
45
6Video Camera
46
ROTATING IMAGE
1
To rotate the image, press
to enter the rotation menu.
2
3
Press
to rotate the image
counter clockwise.
Press
to rotate the image
clockwise.
Press
view.
Press
to enlarge the still
image.
(Zoom 2×)
2
to return to live
ZOOMING IMAGE
1
Continue to press
to
enlarge the still image.
(Zoom 3×, Zoom 4×)
Press
4 times to return to
original image size.
Press
to return to live view.
6Video Camera
Leica M320 / Ref. 10 718 878 / Version 01
6.5.4Viewing videos
1
Press
mode.
2
to enter thumbnail
3
Navigate by using the arrow
keys.
Press
to play the video.
4
5
Press
to forward the video.
Press
to rewind the video.
Press
to return to live view.
Press
to pause / resume
the video.
6.5.5DELETING FILES
1
Press
mode.
2
to enter thumbnail
Navigate by using the arrow
keys.
Press to select the image
for deletion.
3
4
Confirm the file name to be
deleted.
Select “OK” to permanently
delete the file from SD card.
Select “CANCEL” to cancel the
file deletion process.
47
6Video Camera
48
6.5.6PAIRING REMOTE CONTROL
INFO
Remote control pairing allows
the camera to only responds
to the one specific remote
control, which had been
paired to the camera
previously.
This is helpful when there are
multiple cameras and remote
controls in the same room.
1
2
01
02
03
04
05
06
07
09
08
11
Press
to start or end the
pairing.
Press and hold the button on
the remote control, to define
the pairing button, until the
confirmation message is
displayed on the screen.
10
12
All of the buttons (01–12)
except the
button can be
used for this.
Upon completion, a ‘beep’
sound will be generated and
the camera will only respond
to this particular remote
control after pairing.
INFO
In order to achieve successful
pairing and avoid pairing by
mistake, the second step
must be performed within
4 seconds.
If a “timeout” is displayed
after 4 seconds, press the
“Pair” button again to start
the process.
Resetting to factory setting:
Press the
button to start
the process.
Press the
button until a
corresponding confirmation
is displayed on the display.
3
7
Taking the Surgical Microscope out of Operation
Leica M320 / Ref. 10 718 878 / Version 01
NOTE
Possible loss of data!
Before decommissioning the
surgical microscope, end the
video recording procedure.
Bring the surgical microscope
into transport position (see
"5.3 Transporting the
microscope").
Switch off the surgical
microscope at the main
switch.
49
8Care and Maintenance
50
8.1 Maintenance instructions
Instructions
-- Keep accessories away from dust when not in use, e.g. protect them using a dust cover.
-- Remove dust with a pneumatic rubber bulb and a soft brush.
-- Clean lenses and eyepieces using special optics cleaning cloths and pure alcohol.
-- Thoroughly clean the optics carrier using germicidal disinfectant after each time it is
­handled.
-- Protect your microscope from moisture, fumes and acids and from alkaline and caustic
­materials. Do not store chemicals close to the instrument.
-- Protect from improper use. Never install other device sockets or unscrew optical systems
and mechanical parts unless explicitly instructed to do so in this User Manual.
-- Protect the microscope from oil and grease. Never oil or grease the guide surfaces or
­mechanical parts.
-- Remove coarse contamination using a damp disposable cloth.
-- Use disinfectants based on the following active ingredients: aldehydes, alcohols, quaternary
ammonium compounds.
-- No not use preparations based on the following: halogen-splitting compounds, strong
­organic acids, oxygen-splitting compounds.
-- Camera: Keep optical components clean. Clean optical surfaces using a lint-free cloth.
Soak the cloth using a little methanol or glass cleaner. Do not use alcohol.
-- Do not use ethanol or spirits.
Workplace
Remove surface contamination with a paper towel.
Tropical environment/fungus
Leica Microsystems employs certain safety precautions in its manufacturing techniques and
materials. Other preventive measures include:
-- Keep optical parts clean.
-- Use and store them in a clean environment only.
-- Store under UV light when not in use.
-- Use in continuously climate-controlled rooms only.
-- Keep moisture away and cover using a plastic cover filled with silica gel.
Notes on reprocessing of resterilizable products
Limitations on reprocessing
Observe local legal regulations when processing medical products used to treat patients who
have or are suspected to have Creutzfeldt-Jakob disease (CJK) or its variant (vCJK). Usually,
these resterilizable medical products can be safely disposed of by burning.
Occupational safety and health protection
Observe work safety and health protection of persons responsible for processing contaminated
products.
Current regulations of hospital hygiene and prevention of infection must be observed in the
preparation, cleaning and disinfection of the products.
Reprocessing
Recommended: reprocess a product immediately after use.
Sterilization
Permissible sterilization methods
Article No. Designation
Steam autoclave Ethylene oxide
134 °C, t > 10 min. max. 60 °C
10428328
Rotary knob, binocular tube T
x
10384656
Rotary knob, transparent
x
x
10443792
Lever extension
10446058
Protective glass, multifocal lens
x 1)
10448431
Protective objective glass, Leica M320
x 1)
10448296
Objective protective glass, Leica M720,
spare part (package of 10)
x 1)
10448280
Protective objective glass, Leica M720,
complete, sterilizable
x 1)
10446469
Protective objective glass,
Leica M680/FL400
x 1)
10446467
Protective objective glass,
Leica M840/M841
x 1)
10180591
Clip-on handle
x
10446842
Handle for Leica M400, sterilizable
x
10445341
Handle for Leica M655, sterilizable
x
10445340
Cap for Leica M655/M695, sterilizable
x
10448440
Cover, sterilizable for Leica M320 handle
x
10448581
Cover, sterilizable for Leica RUV800
x
1)
Products with optical components can be steam-autoclaved using the conditions listed
above. However, this may cause a layer of dots and streaks to form on the glass surface,
which may reduce the optical performance.
8Care and Maintenance
Leica M320 / Ref. 10 718 878 / Version 01
Cleaning
Needed: water, detergent, spirits, microfiber cloth
1. Flush the surface with running water (<40 °C), using a little detergent if necessary.
2. Also use spirits to clean optical components.
3. Dry optical components using a microfiber cloth, dry the rest of the product using
a paper towel.
Maintenance
The Leica M320 surgical microscope is maintenance-free. To ensure operational safety
and reliability, Leica Microsystems (Schweiz) AG recommends taking the precaution of
contacting the responsible service organization. There, periodic inspections can be
agreed or a maintenance contract can be concluded.
Disinfection
After disinfection, thoroughly clean optical surfaces using running water/fresh drinking water
and then rinse using fresh, demineralized water.
Dry the products completely before the subsequent sterilization.
Leica Microsystems (Schweiz) AG validates:
The instructions above are suitable for preparing a product to be reused. The processor is
responsible for the desired results.
Before deviating from the instructions provided, first verify the deviations for effectiveness
and possible consequences.
8.2Changing fuses
Warning
Danger of fatal electric shock!
Disconnect the power cable
from the instrument power
socket before changing fuses.
INFO
The fuse is in a fuse holder
(arrow) in the device power
socket.
Remove cover of the
­horizontal arm.
Push out fuse holder with
screwdriver.
Remove fuse from the fuse
holder (arrow) and replace.
Screw in the cover of the
horizontal arm and tighten it.
51
9Troubleshooting
52
9.2Video camera
9.1Microscope
Problem
Solution
Location
Problem
Swing arm moves up/down
by itself.
Balance system/swing arm.
See "5.1
Balancing the
swing arm"
No acquisition possible, "SD Push the slide bar for write protection on
Card Lock" appears on the
the SD memory card upwards.
screen.
Swing arm is lowered when
the articulation brakes are
engaged.
-- Reduce the total weight (at the optics
carrier).
-- Turn the lever for locking the vertical
position.
See "5.1
Balancing the
swing arm"
No acquisition possible.
Insert SD memory card.
Microscope moves with
­difficulty or not at all.
Loosen/reset the articulation brakes.
See "3.5
Brake knobs/
articulation
brakes"
Remote control does not
work.
See "6.3.1
-- Check battery.
-- Point remote control at video camera, not Changing the
at screen.
battery"
Specimen out of focus.
-- Focus accurately.
-- Use eyepiece with crosshair reticle.
No image on screen.
-- Check cable connection.
-- Check screen.
See “6 Video
camera”
Photo is too dark.
Reset colors.
See "6.4.2
­COLOR (white
balance)"
Colors not accurate.
Carry out white balance.
See "6.4.2
­COLOR (white
balance)"
File Transfer not possible
Check USB cable connection
No light.
Insufficient light.
Image is not sharp.
Instructions for
-- Check/replace lamp.
-- Check illumination control and ­illuminance. replacing the
-- Check the filter and diaphragm control.
LED
-- Lower the swing arm, the tilt switch may
be active.
-- Check the socket and fuse.
-- Contact service technician.
Check illumination control and ­illuminance. See "5.4.3
­Adjusting the
­illumination"
-- Screw in eyepieces firmly.
-- Set the parfocality and diopter settings
correctly.
See "5.4.4
Adjusting the
interpupillary
distance"
Microscope tilting.
-- Balance system/swing arm.
See "5.1
Balancing the
swing arm"
Interference from light
­reflections.
Turn the protective glass, must be at an
oblique angle relative to the work surface.
Streaks in the image.
Clean optics.
No image.
Magnification control not engaged.
Beep every four seconds,
light switches off
automatically after five
minutes.
Contact service technician, have fan
­replaced.
Double beep every four
seconds, light switches off
automatically after five
minutes.
Allow the LED to cool off, switch off the
­instrument.
INFO
If your instrument has a
malfunction that is not
described here, contact
your Leica representative.
Solution
Location
See "6.2
SD memory
card"
10Specifications
Leica M320 / Ref. 10 718 878 / Version 01
Electrical data
Optical Data
Objective f = 250 mm
Power socket
Stand F12, W12, C12, FP12,
TC12, TP12, LW12
Centrally located on the control unit
100-240 V AC (±10 %), 50/60 Hz
Eyepiece
min.
max.
max.
min.
Fuse
2 × T 6.3 AL/250 V
8.33 × 22
2.1
13.4
86.2
13.6
Power consumption
Leica M320 F12/C12/W12/FP12/TC12/TP12/LW12: 100 VA
10 × 21
2.6
16.2
82.2
13.1
Safety class
Class I / IP20
12.5 × 17
3.2
20.2
66.6
10.6
Control unit
Connection sockets for
- Power cable
- HDMI
- USB
Surgical microscope
Magnification
Manual apochromatic 5-step magnification changer
6.4/10/16/25/40×
Stereo base
24 mm
Fix Objective (standard)
Fix Objective (optional)
f=250 mm
f=200, 225, 250, 300, 350, 400 mm
Manual fine focus Objective f=200, 250, 300 mm
(optional)
Eyepiece (standard)
Eyepiece (optional)
10 × 21B
12.5 × 17B, 8.33 × 22B, eyepiece 10 × 21B with centered
crosshair graticule
Tilt
–30°/+100°
Reset functions
Limit switch for light on/off
Total magnification (mm)
Field of view Ø (mm)
Stands
Leica M320 F12 Floor stand
Max. extension range
1775 mm (Fully stretched for the inclined version)
Travel range (up/down)
800 mm
Base
Footprint: 608 × 608 mm
Transportation height, min.
1621 mm
Balancing Range
Min. 1.1 kg to max. 4 kg load on the optics carrier
Brake system
Fine adjustable mechanical brakes for all rotation axis with
detachable brake knob.
Rotation ranges
At column: 360°
For the swing arm: +190°/–125°
For the microscope carrier at swing arm: ±155°
For the lateral microscope carrier movement: ±60°
Weight of the whole
System with max. load
ca. 116 kg
Lamps
Light source
Direct and long-lasting 2-LED illumination
Average service life of 60,000 h for an end-of-life criterion of
70 % of the initial brightness; Class 1 LED Product
UV filter
UV and IR-free LED illumination
Orange filter
OG530
Light intensity
adjustment
Using a drive knob on the optics carrier
53
10Specifications
54
Accessories
Ambient conditions
Binocular tube
- with fixed angle
- variable
3 different selection options
3 different selection options
Handles
2 variants: Sterilizable/disinfectable or disinfectable
Rotary knobs
Sterilizable
Protective glass
Sterilizable
Orange filter
External UV light filter up to 530 nm for illumination and
­observation
ErgoWedge
5°- to 25°-angle for binocular tubes with fixed angle
ErgonOptic Dent
with 52° swivel angle, for binocular tubes variable
from 0° to 180°
Remote control
IR remote control for the integrated video camera
Counterweight
Weight for balancing the optics carrier
Beam splitter
50/50 % and 70/30 %
Stereo adapter
Spacer for assembly of the beam splitter
Eyepieces
8.33×, 10×, 10× with crosshair graticule, 12.5×
Video Accessories
Leica M320 FULL HD Video & Photo Camera
Integrated (optional) Full
HD video camera
1920×1080 px video resolution and 10 MB photo resolution
Functions
Playback function for video and photo and thumbnail view
Storage
Video and photo on SD card, video optionally also on
­external recording system
Video signal
Available in HDMI and analog (PAL/NTSC selectable)
Video/photo control
IR remote control and two hard keys on camera body,
all ­camera settings with on screen menu
Leica M320 IVA Integrated Video Adapter
Adapter
Integrated (optional) video adapter for attachment of
­external c-mount cameras
Length of optics
Focal length of optics f=55 mm
Use
+10 °C to +40 °C
+50 °F to +104 °F
30 % to 75 % relative humidity
500 mbar to 1060 mbar air pressure
Storage
–30 °C to +70 °C
–22 °F to +158 °F
10 % to 100 % relative humidity
500 mbar to 1060 mbar atmospheric pressure
Transport
–30 °C to +70 °C
–22 °F to +158 °F
10 % to 100 % relative humidity
500 mbar to 1060 mbar atmospheric pressure
Standards fulfilled
CE conformity:
-Medical Devices Directive 93/42/EEC including amendments.
-Classification: Class I, in compliance with Appendix IX, Rule 1, and
Rule 12 of the Directive.
-Medical electrical equipment, part 1: General requirements for Safety
IEC/60601-1; EN/60601-1; UL60601-1; CAN/CSA-C22.2 NO. 601.1-M90.
-Electromagnetic compatibility IEC/60601-1-2; EN/60601-1-2.
-According to SQS certificate, Leica Microsystems (Schweiz) AG,
Medical Division has a management system which corresponds to the
requirements of the international standards ISO/9001, ISO/13485 and
ISO/14001 for quality management, quality assurance and environmental management.
10Specifications
Leica M320 / Ref. 10 718 878 / Version 01
Limitations on use
The Leica M320 surgical microscope may be used in enclosed rooms and on flat surfaces with
max. 0.3° unevenness and on stable walls or ceilings that fulfill our specifications (see Installation Manual).
Not intended for ophthalmology.
The Leica F12 stand is not intended to be moved down steps of more than 20 mm in height.
To move the surgical microscope over thresholds of 20 mm, the wedge (arrow) included in the
packaging can be used.
Without auxiliary equipment, the Leica M320 can only be moved across thresholds up to a
max. height of 5 mm.
Place the wedge (arrow) in
front of the threshold.
Move the surgical
microscope across the
threshold in transport
position, pushing it by the
handgrip.
55
10Specifications
56
Working range
Leica M320 F12 long swing arm
(standard)
Leica M320 short swing arm
Leica M320 W12
Leica M320 C12
Max. extension range
1775 mm
1455 mm
1775 mm
1775 mm
Travel range (up/down)
800 mm
300 mm
800 mm
800 mm
608×608 mm
NA
Diameter 247 mm
1621 mm
NA
NA
Min 1.1 kg to max 4 kg
Min 1.1 kg to max 4 kg
Base
Transportation height, min.
Balancing Range
Min 1.1 kg to max 4 kg
Min 1.5 kg to max 4 kg
Brake system
Fine adjustable brakes for all axes with detachable brake knob.
Rotation ranges
-- For column 360°
-- Swing arm +190°/–125°
-- Microscope carrier on swing
arm ±155°
-- Lateral microscope carrier
movement ±60°
-- For column 360°
-- Swing arm +150°/–150°
-- Extension arm on swing
arm ±150°
-- Microscope carrier on extension
arm ±155°
-- Lateral microscope carrier
movement ±60°
-- For column 180°
-- Swing arm +190°/–125°
-- Microscope carrier on swing
arm ±155°
-- Lateral microscope carrier
­movement ±60°
-- For column 180°
-- Swing arm +190°/–125°
-- Microscope carrier on swing
arm ±155°
-- Lateral microscope carrier
­movement ±60°
Total weight of the system with
maximum load
116 kg
110 kg
35 kg
48 kg
10Specifications
Leica M320 / Ref. 10 718 878 / Version 01
Leica M320 FP12
Leica M320 TC12
Leica M320 TP12
Leica M320 LW12
Comment
1775 mm
1455 mm
1455 mm
1455 mm
Fully stretched for the
­inclined version
800 mm
300 mm
300 mm
300 mm
Diameter 247 mm
250×250 mm
250×250 mm
NA
NA
NA
NA
NA
Min 1.1 kg to max 4 kg
Min 1.5 kg to max 4 kg
Min 1.5 kg to max 4 kg
Min 1.5 kg to max 4 kg
Load on the optics carrier
Fine adjustable brakes for all axes with detachable brake knob.
-- For column 360°
-- Swing arm +190°/–125°
-- Microscope carrier on swing arm ±155°
-- Lateral microscope carrier movement
±60°
-- For column 180°
-- Swing arm +150°/–150°
-- Extension arm on swing arm ±150°
-- Microscope carrier on extension
arm ±155°
-- Lateral microscope carrier movement
±60°
-- For column 180°
-- Swing arm +150°/–150°
-- Extension arm on swing arm ±150°
-- Microscope carrier on extension
arm ±155°
-- Lateral microscope carrier movement
±60°
-- For column 180°
-- Swing arm +150°/–150°
-- Extension arm on swing arm ±150°
-- Microscope carrier on extension
arm ±150°
-- Lateral microscope carrier movement
±60°
46 kg
41 kg
38 kg
30 kg
57
10Specifications
Dimensions (in mm)
58
10Specifications
Leica M320 / Ref. 10 718 878 / Version 01
Manufacturer's declaration of electromagnetic compatibility (EMC)
Table 2: Immunity (all devices)
Guidance and manufacturer's declaration - electromagnetic immunity
INFO
This "Guidance and manufacturer's declaration" document is based on EN 60601-1-2: 2007.
Immunity test
standard
Table 1: Emission
Guidance and manufacturer's declaration - electromagnetic emissions
The Leica M320 surgical microscope is intended for use in the electromagnetic environment specified
below. The customer or the user of the Leica M320 surgical microscope should assure that it is used in
such an environment.
Emission test
RF emissions
CISPR 11
The Leica M320 surgical microscope is intended for use in the electromagnetic environment specified
below. The customer or the user of the Leica M320 surgical microscope should assure that it is used in
such an environment.
Compliance
Group 1
RF emissions
CISPR 11
Class A
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
according
Electromagnetic environment - guidance
The Leica M320 surgical microscope uses RF energy only for
its internal function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
"The Leica M620 F20 surgical microscope is suitable for
use in establishments other than domestic and those
directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes."
IEC‥60601
test level
Conformity level
Electromagnetic environment Guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
±6 kV contact
­discharge
±8 kV air
discharge
±6 kV contact
­discharge
±8 kV air
discharge
Floors should be of wood, concrete
or ceramic tile. If floors are covered
with synthetic material, the relative
humidity must be at least 30 %.
Electrical fast
transient /
burst
IEC 61000-4-4
±2 kV for power
supply lines
±1 kV for input/
output lines
±2 kV for power
supply lines
±1 kV for input/
output lines
Mains power quality should be that
of a typical commercial or hospital
environment.
Surge
IEC 61000-4-5
±1 kV
differential mode
±2 kV
common mode
±1 kV
differential mode
±2 kV
common mode
Mains power quality should be that
of a typical commercial or hospital
environment.
Voltage dips,
short
interruptions and
voltage variations
on power supply
lines
IEC 61000-4-11
<5 % UT (0.5 cycle)
40 % UT (5 cycles)
70 % UT (25 cycles)
<5 % UT for 5 s
<5 % UT (0.5 cycle)
40 % UT (5 cycles)
70 % UT (25 cycles)
<5 % UT for 5 s
Mains power quality should be that
of a typical commercial or hospital
environment.
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m
Not applicable
Note:
UT is the a.c. mains voltage prior to application of the test level.
59
10Specifications
60
Table 4: Immunity (not life-supporting devices)
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due
to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured
field strength in the location in which the Leica M320 surgical microscope is used exceeds the
applicable HF compliance levels above, the Leica M320 surgical microscope should be kept under
observation in order to determine whether it is operating correctly. If abnormal performance is
observed, additional measures may be necessary, such as reorienting or relocating the Leica M320.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Guidance and manufacturer's declaration - electromagnetic immunity
The Leica M320 surgical microscope is intended for use in the electromagnetic environment specified
below. The customer or the user of the Leica M320 surgical microscope should assure that it is used in
such an environment.
Electromagnetic environment - guidance
Portable and mobile RF communications should be used no closer to any part of the Leica M320
surgical microscope, including cables, than the recommended separation distance calculated from the
equation applicable to the frequency of the transmitter. a
Immunity test
standard
IEC 60601
test level
Conformity
level
Conducted RF
equipment
IEC 61000-4-6
3 Vrms
150 kHz to 80 MHz
3 Vrms
Radiated RF
disturbance
variables
IEC 61000-4-3
3 V/m
80 MHz to 2.5 GHz
3 V/m
Recommended separation distance
d = 2.4 √P
150 kHz to 80 MHz
d = 2.4 √P
80 MHz to 2.5 GHz
Where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer and d is the recommended separation distance in meters (m).
Field strengths from fixed RF transmitters, as determined by an electromagnetic
site survey, should be less than the compliance level in each frequency range. b
Interference may occur in the vicinity of equipment marked with the following symbol:
Note 1:
Note 2:
Table 6: Recommended separation distances (not life-supporting devices)
Recommended separation distances between portable and mobile RF communications equipment
and the Leica M320 surgical microscope
The Leica M320 surgical microscope is intended for use in an electromagnetic environment in which
RF interference is controlled. The customer or the user of the Leica M320 surgical microscope can help
prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the Leica M320 surgical microscope as
recommended below, according to the maximum output power of the communications equipment.
Separation distance according to frequency of transmitter in m
Rated maximum output
power of transmitter in W
150 kHz to 80 MHz
d = 2.4 √P in m
80 MHz to 800 MHz
d = 2.4 √P in m
800 MHz to 2.5 GHz
d = 2.4 √P in m
At 80 MHz and 800 MHz, the higher frequency range applies.
0.01
0.24
0.24
0.24
These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
0.1
0.8
0.8
0.8
1
2.4
2.4
2.4
10
8.0
8.0
8.0
100
24.0
24.0
24.0
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
Note 1:
These guidelines may not apply in all situations. Electromagnetic propagation is
­affected by absorption and reflection from structures, objects and people.
10Specifications
Leica M320 / Ref. 10 718 878 / Version 01
Warning Message
Using accessories or cables other than those specified here or as approved by the manufacturer of the
Leica M320 surgical microscope can lead to elevated electromagnetic emissions or reduced
interference resistance.
The Leica M320 surgical microscope may not be used in direct proximity of other devices. If it is
necessary to operate it in the vicinity of other instruments, the instrument should be monitored to
ensure that it functions properly in this arrangement.
Grounding reliability can
only be achieved when
EQUIPMENT is connected to equivalent receptacle marked "Hospital
only" or "Hospital Grade"
Class 1
LED PRODUCT
Alternating current
Fuse
LEICA W12
LEICA C12
Caution, follow the User
Manual
61
www.leica-microsystems.com
The fruitful collaboration ”with the user, for the user“ has always been the
foundation of Leica Microsystems‘ innovative strength. On this basis, we
have developed our five corporate values: Pioneering, High-end Quality,
Team Spirit, Dedication to Science, and Continuous Improvement.
Leica Microsystems – an international company with a strong network of
worldwide customer services:
Active worldwide
USA ∙ Buffalo Grove/Illinois
Canada ∙ Concord/Ontario
Tel.
+1 800 248 0123
+1 800 248 0123
Fax
+1 847 405 0164
+1 847 405 0164
MeDICaL DIvISIOn
What does a surgeon expect from an outstanding surgical microscope?
Sharp, clear images, and a modular system aligned with the surgeon and
OR staff needs.
Australia ∙ North Ryde/NSW
+61
2 8870 3500
+61
2 9878 1055
Austria ∙ Vienna
Belgium ∙ Diegem
Denmark ∙ Ballerup
France ∙ Nanterre Cedex
Germany ∙ Wetzlar
Italy ∙ Milan
Netherlands ∙ Rijswijk
Portugal ∙ Lisbon
Spain ∙ Barcelona
Sweden ∙ Kista
Switzerland ∙ Heerbrugg
United Kingdom ∙ Milton Keynes
+43
+32
+45
+33
+49
+39
+31
+351
+34
+46
+41
+44
1 486 80 50 0
2 790 98 50
4454 0101
811 000 664
64 41 29 40 00
02 574 861
70 4132 100
21 388 9112
900 210 992
8 625 45 45
71 726 34 34
800 298 2344
+43
+32
+45
+33
+49
+39
+31
+351
+34
+46
+41
+44
1 486 80 50 30
2 790 98 68
4454 0111
1 56 05 23 23
64 41 29 41 55
02 574 03392
70 4132 109
21 385 4668
93 494 95 40
8 625 45 10
71 726 34 44
1908 246 312
China ∙ Hong Kong
∙ Shanghai
Japan ∙ Tokyo
Korea ∙ Seoul
Singapore
+852
+86
+81
+82
+65
2 564 6699
21 6039 6000
3 5421 2800
2 514 65 43
6779 7823
+852
+86
+81
+82
+65
2 564 4163
21 6387 6698
3 5421 2896
2 514 65 48
6773 0628
Innovations for your practice
From the first surgical microscope with widefield optics in the 1980s to the
first microscopes with Horizontal Optics and with LeD illumination, Leica
Microsystems has been at the forefront of innovation in the development of
surgical microscopes.
HD video, fluorescence and retinal viewing systems also demonstrate the
continued innovative nature of the Leica team. We strive to provide the
surgeon with leading edge technology to enhance performance, surgeon
comfort, and patient outcomes.
10 718 878en/01 • Copyright © by Leica Microsystems (Schweiz) AG, Medical Division, CH-9435 Heerbrugg, 2013 • Printed – X.2013 – Data preparation by galledia • Subject to change.
LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH.
">