Noble Falcon Pro Instruction Manual

 O
OXHWRRWK HDUSKRQH
If the earbuds are turned on without connecting to a device for 5 minutes, then the earbuds will power off automatically.
The earbuds will power on automatically when removed from the charging case if the earbuds have been sufficiently charged.
A white indicator LED will bling for one second to indicate a “power on” state.
The earbuds will power off automatically after being placed in the charging case.
1. Please note that both the earbuds can be used in mono mode. Remove the desired earbud from the charging case to switch it on.
2. The selected earbud will automatically enter the connection mode indicated by white LED flashes.
3. Turn on Bluetooth on your device and search for Noble Falcon Pro to connect.
Notes:
To switch to stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, thus enabling stereo usage.
You cannot skip tracks or return to the previous tracks in mono mode.
PRO
Take the earbuds out of the case and double tap the Tap sensor to activate hear-through mode.
Please make sure that the earbuds are on standby, whether connected or disconnected to the device.
Note that hear-through mode cannot be activated when music is playing or during a call. Please pause any music or t
erminate any calls prior to activating the hear-through function.