HP Deskjet D1400 Printer series User guide
Reklam
Reklam
HP Deskjet D1400 Printer series
HP Photosmart Software Help
© 2007 Hewlett-Packard Development
Company, L.P.
Hewlett-Packard Company notices
The information contained in this document is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Acknowledgements
Microsoft, MS, MS-DOS, and Windows are registered trademarks of Microsoft
Corporation.
TrueType is a U.S. trademark of Apple
Computer, Inc.
Adobe, AdobeRGB, and Acrobat are trademarks of Adobe Systems
Incorporated.
Terms and conventions
The following terms and conventions are used in this user's guide.
Terms
The HP Deskjet printer is also referred to as the HP Deskjet, HP printer, or
printer.
Cautions and warnings
A Caution indicates possible damage to the HP Deskjet printer or to other equipment. For example:
CAUTION:
Do not touch the print cartridge ink nozzles or copper contacts. Touching these parts will result in clogs, ink failure, and bad electrical connections.
A Warning indicates possible harm to you or to others. For example:
WARNING!
Keep both new and used print cartridges out of the reach of children.
Accessibility
Your HP printer provides a number of features that make it accessible for people with disabilities.
Visual
The printer software is accessible for users with visual impairments or low vision through the use of Windows accessibility options and features. It also supports most assistive technology such as screen readers, Braille readers, and voice-to-text applications. For users who are color blind, colored buttons and tabs used in the software and on the HP printer have simple text or icon labels that convey the appropriate action.
Mobility
For users with mobility impairments, the printer software functions can be executed through keyboard commands. The software also supports
Windows accessibility options such as
StickyKeys, ToggleKeys, FilterKeys, and MouseKeys. The printer doors, buttons, paper trays, and paper guides can be operated by users with limited strength and reach.
Support
For more details about the accessibility of this product and HP's commitment to product accessibility, visit HP's Web site at: www.hp.com/accessibility .
Contents
1
2
Contents
3
Disposal of Waste Equipment by Users in Private Households in the European Union....80
4
1 Welcome
Welcome to the HP Deskjet D1400 Printer series Help. For details on how to use your computer and the printer together, see the following table and select an appropriate topic.
You can also use the table of contents pane on the left to locate information.
NOTE:
For information about installing the software, see the Setup Guide that came with the printer.
Section
HP inkjet supplies recycling program
Description
Learn about some of the printer's special features.
Learn how to operate the printer and use and replace the print cartridges.
Learn how to connect the printer to your computer.
Learn how to print photos, adjust the appearance of photos before you print, install a photo print cartridge, store and handle photo paper, and share photos with friends and family.
Learn how to print a variety of documents, including e-mail, greeting cards, envelopes, labels, posters, booklets, transparencies, and iron-on media.
Learn how to use printing shortcuts, select a paper type, change the print resolution, set the page order, print multiple pages on a single sheet, preview a document, and use two-sided printing.
Learn how to make the HP Deskjet the default printer, set default print settings, and download printer software updates.
Learn how to install and care for print cartridges, view how much ink is left in a print cartridge, print a test page, and remove ink stains.
Find a solution to a hardware or software problem.
Find out how to contact HP support.
Order supplies for the printer.
Learn about the paper capacity, requirements, and other specifications for the printer.
Find out how to recycle print cartridges.
Welcome 5
2 Special features
Congratulations! You have purchased an HP Deskjet printer that is equipped with several exciting features:
• User friendly: Easy to install and operate.
• Borderless printing: Print 4 x 6 inch photos to the edges of the paper by using
printing feature.
• Ink level indicator: Know the approximate ink level of each print cartridge with the
onscreen Ink Status window. For information, see View estimated ink levels .
• Ink-backup mode: Continue printing with one print cartridge when the other print
cartridge has run out of ink. For information, see Ink-backup mode .
6 Special features
3 Get started
•
•
•
•
•
Printer at a glance
Click the links below to learn about the printer features.
1
2
1
Get started 7
Chapter 3
1
Power button and light
Use the Power button to turn the printer on and off. It can take a few seconds for the printer to turn on after you press the Power button.
1 Power button and light
The Power light flashes when the printer is processing.
CAUTION:
Always use the Power button to turn the printer on and off. Using a power strip, surge protector, or a wall-mounted switch to turn the printer on and off might cause printer failure.
Paper tray
The fold-out paper tray holds paper and other media to be printed. Unfold the paper tray before printing.
•
•
8 Get started
Unfold the paper tray
To unfold the paper tray
1. Raise the printer cover.
2. Lower the paper tray.
3. Fold out the tray extension.
4. Lower the printer cover.
Paper tray 9
Chapter 3
Use the paper tray
Print on different sizes of media by sliding the paper guide to the right or to the left. The printer deposits printed pages on the top of the paper tray.
Print cartridges
Two print cartridges can be used with the printer.
1 Tri-color print cartridge
2 Black print cartridge
NOTE:
Your printer might be packaged with only a tri-color print cartridge. For better results, install a black print cartridge in addition to the tri-color print cartridge. You can print without a black print cartridge but doing so can cause the printer to print more slowly and printed colors to differ from those you would see if a black print cartridge and a tri-color print cartridge were installed.
For information on ordering print cartridges, see Order supplies .
Replace print cartridges
When buying print cartridges, look for the print cartridge selection number.
10 Get started
You can find the selection number in three places:
• Selection number label: Look at the label on the print cartridge that you are replacing.
1 Selection number label
• Printer documentation: For a list of print cartridge selection numbers, see the reference guide that came with the printer.
• Print Cartridge Ordering Information dialog box: For a list of print cartridge selection numbers, open the printer
Toolbox , click the Estimated Ink Level tab, and then click
the Print Cartridge Information button.
If a print cartridge runs out of ink, the printer can operate in ink-backup mode. For more information, see
For information about installing a replacement print cartridge, see
Ink-backup mode
In the ink-backup mode, the printer operates with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge cradle.
NOTE:
When the printer operates in ink-backup mode, a message is displayed on screen. If the message is displayed and two print cartridges are installed in the printer, verify that the protective piece of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts, the printer cannot detect that the print cartridge is installed.
Ink-backup mode 11
Chapter 3
To remove plastic tape from a print cartridge
▲ Hold the print cartridge so that the copper strips are on the bottom and facing toward the printer, and then carefully remove the plastic tape.
1 Remove plastic tape
CAUTION:
Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical connections.
Do not remove the copper strips. They are required electrical contacts.
For more information about ink-backup mode, see the following topics:
•
•
Ink-backup mode output
Printing in ink-backup mode slows the printer and affects the quality of printouts.
Installed print cartridge
Black print cartridge
Tri-color print cartridge
Result
Colors print as grayscale.
Colors print but black is grayed and is not a true black.
Exit ink-backup mode
Install two print cartridges in the printer to exit ink-backup mode.
For information about installing a print cartridge, see Installation instructions .
12 Get started
4 Connect the printer
•
USB
The printer connects to the computer with a universal serial bus (USB) cable.
NOTE:
For best printing performance, use a USB 2.0 compatible cable.
For instructions about connecting the printer with a USB cable, see the Setup Guide that came with the printer.
NOTE:
A USB cable might not be packaged with your printer.
Connect the printer 13
5 Print photos
The printer software offers several features that make printing digital photos easier and improve photo quality.
Learn how to print photos
Print a
Print a photo with a
Learn how to perform other photo printing tasks
• Print an
Exif Print-formatted photo if you have Exif Print-enabled software.
•
Prevent photo paper from curling by following the photo paper storage and handling guidelines .
•
Use HP Everyday Photo Paper to save money and ink when printing photos.
Print borderless photos
To print borderless photos, use 4 x 6 inch photo paper with a 0.5 inch tab (10 x 15 cm with 1.25 cm tab). The photo prints without borders on three sides and with a small border on the bottom edge that you tear off to make the photo completely borderless.
Guidelines
• Use 4 x 6 inch photo paper with a 0.5 inch tab (10 x 15 cm with 1.25 cm tab).
• Do not print borderless photos in ink-backup mode. Always have two print cartridges installed in the printer.
For more information, see
• Open the file in a software program such as HP Photosmart Software and resize the photo. Ensure that the size corresponds to the paper size that you want to use.
• For maximum fade resistance, use HP Premium Plus Photo Paper.
• Verify that the photo paper that you are using is flat. For information about preventing photo paper from curling, see the
photo paper storage instructions .
• Do not exceed the paper tray capacity: 15 sheets of photo paper.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Verify that the photo paper is flat.
3. Place the photo paper in the right side of the tray. The side to be printed on should face down and the short edge should point towards the printer.
If you are using photo paper that has a tear-off tab, verify that the tab is pointing away from the printer.
14 Print photos
4. Push the paper into the printer until it stops.
5. Slide the paper guide firmly against the edge of the paper.
NOTE:
If your software program includes a photo printing feature, follow the instructions that are provided with the software program. Otherwise, follow these instructions.
1. Open the photo in a software program that allows editing, such as HP Photosmart
Software.
2. Open the
Printer Properties dialog box .
3. Click the Printing Shortcuts tab.
4. In the Printing Shortcuts list, click Photo Printing-Borderless, and then select the following options:
• Print Quality: Normal or Best
NOTE:
For maximum dpi quality, go to the Features tab, and then click
Maximum dpi in the Print Quality drop-down list.
• Paper Type: An appropriate photo paper type
• Paper Size: An appropriate borderless photo paper size
• Orientation: Portrait or Landscape
5. If necessary, change the
HP Real Life Technologies photo fix setting.
6. Select any other print settings that you want, and then click OK.
If you printed on photo paper with a tear-off tab, remove the tab to make the document completely borderless.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print borderless photos 15
Chapter 5
Print photos with a border
Guidelines
• For maximum fade resistance, use HP Premium Plus Photo Paper.
• Verify that the photo paper that you are using is flat. For information about preventing photo paper from curling, see the
photo paper storage instructions .
• Do not exceed the paper tray capacity: 15 sheets of photo paper.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Verify that the photo paper is flat.
3. Place the photo paper in the right side of the tray. The side to be printed on should face down and the short edge should point towards the printer.
4. Push the paper into the printer until it stops.
5. Slide the paper guide firmly against the edge of the paper.
Small photos
Large photos
NOTE:
If your software program includes a photo printing feature, follow the instructions that are provided with the software program. Otherwise, follow these instructions.
1. Open the photo in a software program that allows editing, such as HP Photosmart
Software.
2. Open the
.
3. Click the Printing Shortcuts tab.
16 Print photos
4. In the Printing Shortcuts list, click Photo Printing-with white borders, and then select the following options:
• Print Quality: Normal or Best
NOTE:
For maximum dpi quality, go to the Features tab, and then click
Maximum dpi in the Print Quality drop-down list.
• Paper Type: An appropriate photo paper type
• Paper Size: An appropriate photo paper size
• Orientation: Portrait or Landscape
5. If necessary, change the
HP Real Life Technologies photo fix setting.
6. Select any other print settings that you want, and then click OK.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
HP Real Life Technologies photo fix
HP Real Life Technologies enhance the quality of your printed photos.
In most cases, you do not need to change the Basic default print setting. The Basic setting sharpens the images that you print, and improves the quality and clarity of low resolution images, such as those downloaded from the Internet.
You can change the setting to Full if the images that you print are under exposed or over exposed, contain dark areas or red eye, or have colors that appear washed out.
You can also select the Off setting if you prefer to edit the image manually in a software program such as HP Photosmart Software.
To change the HP Real Life Technologies setting
1. Open the
Printer Properties dialog box .
2. Click the Features tab.
3. In the HP Real Life Technologies Photo fix drop-down list, select the appropriate setting for the photo you are printing.
Exif Print
Exif Print (Exchangeable Image File Format 2.2) is an international digital imaging standard that simplifies digital photography and enhances printed photos. When a photo is taken with an Exif Print-enabled digital camera, Exif Print captures information such as exposure time, type of flash, and color saturation, and stores it in the image file. The printer software then uses this information to automatically perform image-specific enhancements to create outstanding photos.
To print Exif Print-enhanced photos, you must have the following items:
• A digital camera that supports Exif Print
• Exif Print-enabled photo software, such as HP Photosmart Software
HP Real Life Technologies photo fix 17
Chapter 5
To print Exif Print-enhanced photos
1. Open the photo in an Exif Print-enabled software program that allows editing, such as HP Photosmart Software.
2. Open the
.
3. Click the Features tab.
4. In the Paper Type drop-down list, click More, and then select the appropriate photo paper type.
5. In the Print Quality drop-down list, click Normal, Best, or Maximum dpi.
6. Select any other print settings that you want, and then click OK.
The printer software automatically optimizes the printed image.
Store and handle photo paper
Follow these instructions to maintain the quality of HP brand photo paper.
Storage
• Keep unused photo paper in a sealed plastic bag. Store the packaged photo paper on a flat surface in a cool place.
• When you are ready to print, remove only the paper that you plan to use immediately from the plastic bag. When you have finished printing, return any unused photo paper to the plastic bag.
• Do not leave unused photo paper in the paper tray. The paper might start to curl, which can reduce the quality of your photos.
Handling
• Always hold photo paper by its edges. Fingerprints on photo paper can reduce print quality.
• If the corners of the photo paper curl more than 10 mm (0.4 inch), flatten the paper by putting it in the storage bag, and then gently bending it in the opposite direction of the curl until the paper lies flat.
Photo paper should be flat before it is printed on.
Save money when printing photos
To save money and ink when printing photos, use HP Everyday Photo Paper and set the print quality to Normal.
HP Everyday Photo Paper is designed to create quality photos with less ink.
NOTE:
For higher-quality photos, use HP Premium Plus Photo Paper and set the print quality to Best or Maximum dpi.
18 Print photos
6 Print other documents
Printing tips: Minimize your cost and effort while maximizing the quality of your printouts with
Printer software: Learn about the printer software
.
Print e-mail
Guidelines
Do not exceed the paper tray capacity: 80 sheets of plain paper.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place plain paper in the right side of the tray. The side to be printed on should face down.
Print other documents 19
Chapter 6
3. Push the paper into the printer until it stops.
4. Slide the paper guide firmly against the edge of the paper.
1. Open the
.
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click General Everyday Printing or Fast/Economical
Printing, and then specify the following print settings:
• Paper Type: Plain paper
• Paper Size: An appropriate paper size
4. Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties dialog box.
Print documents
Guidelines
• For draft documents, use
.
•
Save paper with two-sided printing .
• Do not exceed the paper tray capacity: 80 sheets of paper.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place plain paper in the right side of the tray. The side to be printed on should face down.
20 Print other documents
3. Push the paper into the printer until it stops.
NOTE:
The paper will extend over the edge of the tray.
4. Slide the paper guide firmly against the edge of the paper.
1. Open the
Printer Properties dialog box .
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click General Everyday Printing, and then specify the following print settings:
• Paper Type: Plain paper
• Paper Size: An appropriate paper size
4. Select the following print settings:
• Print Quality if you want a print quality other than Normal
• Print On Both Sides if you want to print on both sides of the paper
For more information, see
5. Select any other print settings that you want, and then click OK.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print letters
Guidelines
• For information about printing an envelope for your letter, see
• Do not exceed the paper tray capacity: 80 sheets of paper.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place plain paper in the right side of the tray. The side to be printed on should face down.
NOTE:
If you are using letterhead paper, the letterhead should face down and point toward the printer.
Print letters 21
Chapter 6
3. Push the paper into the printer until it stops.
4. Slide the paper guide firmly against the edge of the paper.
1. Open the
.
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click Presentation Printing, and then specify the following print settings:
• Paper Type: Plain paper
• Paper Size: An appropriate paper size
4. Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties dialog box.
Print envelopes
Guidelines
• Avoid using envelopes that have the following features:
• Clasps or windows
• Thick, irregular, or curled edges
• Shiny or embossed coatings
• Wrinkles, tears, or other damage
• You can print a single envelope or multiple envelopes.
• Align the envelope edges before inserting the envelopes in the paper tray.
• Do not exceed the paper tray capacity: 10 envelopes.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place the envelopes in the right side of the tray. The side to be printed on should face down. The flap should be on the left side.
22 Print other documents
3. Push the envelopes into the printer until they stop.
4. Slide the paper guide firmly against the edge of the envelopes.
1. Open the
Printer Properties dialog box .
2. Click the Features tab, and then select the following print settings:
• Paper Type: Plain paper
• Size: An appropriate envelope size
3. Select any other print settings that you want, and then click OK.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print postcards
Guidelines
Do not exceed the paper tray capacity: 20 postcards.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place the cards in the right side of the tray. The side to be printed on should face down and the short edge should point toward the printer.
3. Push the cards into the printer until they stop.
4. Slide the paper guide firmly against the edge of the cards.
Print postcards 23
Chapter 6
1. Open the
.
2. Click the Features tab, and then specify the following print settings:
• Paper Type: Click More, click Specialty Papers, and then select an appropriate card type.
• Print Quality: Normal or Best
• Size: An appropriate card size
3. Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties dialog box.
NOTE:
If an out-of-paper message is displayed, see
in resolving the problem.
Print index cards and other small media
Guidelines
Do not exceed the paper tray capacity: 20 cards.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place the cards in the right side of the tray. The side to be printed on should face down and the short edge should point toward the printer.
3. Push the cards into the printer until they stop.
4. Slide the paper guide firmly against the edge of the cards.
1. Open the
.
2. Click the Features tab, and then specify the following print settings:
• Paper Type: Plain paper
• Size: An appropriate card size
3. Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties dialog box.
NOTE:
If an out-of-paper message is displayed, see
in resolving the problem.
24 Print other documents
Print labels
Guidelines
• Use only paper, plastic, or clear labels that are designed specifically for inkjet printers.
• Use only full sheets of labels.
• Avoid using labels that are sticky, wrinkled, or pulling away from the protective backing.
• Do not exceed the paper tray capacity: 15 sheets of labels (use only Letter or A4-size sheets).
Prepare to print
1. Slide the paper guide all the way to the left.
2. Fan the edges of the label sheets to separate them, and then align the edges.
3. Place the label sheets in the right side of the tray. The label side should face down.
4. Push the sheets into the printer until they stop.
5. Slide the paper guide firmly against the edge of the sheets.
NOTE:
If your software program includes a label printing feature, follow the instructions that are provided with the software program. Otherwise, follow the instructions below.
1. Open the
Printer Properties dialog box .
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click General Everyday Printing, and then specify the following print settings:
• Paper Type: Plain paper
• Paper Size: An appropriate paper size
4. Click OK.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print CD/DVD tattoos
NOTE:
This feature might not be available in your country/region.
Print labels 25
Chapter 6
Guidelines
• See the instructions that are included with the CD/DVD tattoo for the most current printing tips.
• To avoid damaging the printer, do not feed a CD/DVD tattoo through the printer more than once.
• Make sure the CD/DVD tattoo covers the entire backing sheet with no exposed spaces. Separating any part of the CD/DVD tattoo from the protective backing sheet before printing could damage the printer.
• Avoid using a CD/DVD tattoo that is pulling away from the protective backing, or that is wrinkled, curled, or damaged in any way.
• Do not exceed the input tray capacity: 1 sheet of CD/DVD tattoo paper.
Prepare to print
1. Raise the output tray, and then remove all paper from the input tray.
2. Slide the paper guide all the way to the left.
3. Place one sheet of CD/DVD tattoo paper in the right side of the input tray. The side to be printed on should face down.
4. Push the paper into the printer until it stops.
5. Slide the paper guide firmly against the edge of the paper.
6. Lower the output tray.
1. Open the
.
2. Click the Features tab, and then specify the print settings in the order shown below:
• Size: 5x7in.
• Paper Type: Click More, click Specialty Papers, and then click HP CD/DVD
Tattoo.
• Print Quality: Best
NOTE:
If you are using the HP Photosmart Essential Software, click the
Advanced tab. Then expand Printer Features, and set Mirror Image to On.
3. Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties dialog box.
26 Print other documents
Print transparencies
Guidelines
• For great results, use HP Premium Inkjet Transparency Film.
• Do not exceed the paper tray capacity: 20 transparencies.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place the transparencies in the right side of the tray. The side to be printed should face down and the adhesive strip should face up and toward the printer.
3. Carefully push the transparencies into the printer until they stop, so that the adhesive strips do not catch on one another.
4. Slide the paper guide firmly against the edge of the transparencies.
1. Open the
Printer Properties dialog box .
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click Presentation Printing, and then specify the following print settings:
• Paper Type: Click More, and then select an appropriate transparency film.
• Paper Size: An appropriate paper size
4. Select any other print settings that you want, and then click OK.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print brochures
Guidelines
• Open the file in a software program and assign the brochure size. Ensure that the size corresponds to the paper size on which you want to print the brochure.
• Do not exceed the paper tray capacity: 30 sheets of brochure paper.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place the paper in the right side of the tray. The side to be printed on should face down.
Print transparencies 27
Chapter 6
3. Push the paper into the printer until it stops.
4. Slide the paper guide firmly against the edge of the paper.
1. Open the
.
2. Click the Features tab.
3. Specify the following print settings:
• Print Quality: Best
• Paper Type: Click More, and then select an appropriate HP inkjet paper.
• Orientation: Portrait or Landscape
• Size: An appropriate paper size
• Two-sided printing: Manual
For more information, see
.
4. Click OK to print.
Use the
to learn about the features that appear in the Printer Properties dialog box.
Print greeting cards
Greeting cards
• Unfold prefolded cards, and then place them in the paper tray.
• For great results, use HP Greeting Card Paper.
• Do not exceed the paper tray capacity: 20 cards.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Fan the edges of the greeting cards to separate them, and then align the edges.
3. Place the greeting cards in the right side of the tray. The side to be printed on should face down.
28 Print other documents
4. Push the cards into the printer until they stop.
5. Slide the paper guide firmly against the edge of the cards.
NOTE:
If your software program includes a greeting card printing feature, follow the instructions that are provided with the software program. Otherwise, follow the instructions below.
1. Open the
Printer Properties dialog box .
2. Click the Features tab, and then specify the following print settings:
• Print Quality: Normal
• Paper Type: Click More, and then select an appropriate card type.
• Size: An appropriate card size
3. Select any other print settings that you want, and then click OK.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print booklets
Booklet printing automatically arranges and resizes the pages of a document so that when the document is folded into a booklet, the page order is correct.
For example, when a four-page booklet is printed on both sides of the paper, the pages are reordered and printed like this:
Guidelines
Do not exceed the paper tray capacity: 80 sheets of paper.
Print booklets 29
Chapter 6
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place plain paper in the right side of the tray. The side to be printed on should face down.
3. Push the paper into the printer until it stops.
4. Slide the paper guide firmly against the edge of the paper.
1. Open the
.
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click Two-sided (Duplex) Printing.
4. In the Print On Both Sides drop-down list, select one of the following binding options:
•
Left Edge Booklet
•
Right Edge Booklet
5. Select any other print settings that you want, and then click OK.
6. When prompted, reload the printed pages in the paper tray as shown below.
7. Click Continue to finish printing the booklet.
Use the
to learn about the features that appear in the Printer Properties dialog box.
30 Print other documents
Print posters
Guidelines
• For poster printing, sections of the poster are automatically arranged on individual sheets that can be taped together. After the sections of a poster have been printed, trim the edges of the sheets and tape the sheets together.
• Do not exceed the paper tray capacity: 80 sheets of paper.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place plain paper in the right side of the tray. The side to be printed on should face down.
3. Push the paper into the printer until it stops.
4. Slide the paper guide firmly against the edge of the paper.
1. Open the
Printer Properties dialog box .
2. Click the Features tab, and then specify the following print settings:
• Paper Type: Plain paper
• Orientation: Portrait or Landscape
• Size: An appropriate paper size
3. Click the Advanced tab, and then click Printer Features.
4. In the Poster Printing drop-down list, select the number of sheets for the poster.
5. Click the Select Tiles button.
Print posters 31
Chapter 6
6. Check that the number of tiles that are selected matches the number of sheets for the poster, and then click OK.
7. Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties dialog box.
Print iron-on transfers
Guidelines
• When printing a mirror image, the text and the pictures are horizontally reversed from what is displayed on the computer screen.
• Do not exceed the paper tray capacity: 10 iron-on transfers.
Prepare to print
1. Slide the paper guide all the way to the left.
2. Place the iron-on transfer paper in the right side of the tray. The side to be printed on should face down.
3. Push the paper into the printer until it stops.
4. Slide the paper guide firmly against the edge of the paper.
NOTE:
If your software program includes an iron-on transfer printing feature, follow the instructions that are provided with the software program. Otherwise, follow the instructions below.
32 Print other documents
1. Open the
Printer Properties dialog box .
2. Click the Features tab, and then specify the following print settings:
• Print Quality: Normal or Best
• Paper Type: Click More, click Specialty Papers, and then click Other specialty
paper.
• Size: An appropriate paper size
3. Click the Advanced tab.
4. Click Printer Features, and then set Mirror Image to On.
NOTE:
Some iron-on transfer software programs do not require you to print a mirror image.
5. Select any other print settings that you want, and then click OK.
Use the
What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print iron-on transfers 33
7 Printing tips
Check your printer
•
Connect the printer to your computer.
•
Save time
• Use the
•
that the pages print.
Save money
• Use
.
•
Print multiple pages on a single sheet of paper .
• Print in
.
• Print a
.
• Use
HP Everyday Photo Paper to save money and ink when printing photos.
Enhance the quality of prints
•
the document before printing it.
•
.
•
•
Change the print speed and quality .
•
.
• Achieve the highest printing resolution with
•
Resize the document as needed.
Print a test page
You can print a test page to verify that the printer can print from the computer correctly.
To print a test page
1. Load Letter or A4 unused plain white paper in the paper tray.
2. Open the printer
3. On the Device Services tab, click the Print a Test Page button.
The Print a Test Page dialog box is displayed.
4. Click the Print Page button.
Recycle or discard the test page.
Printing shortcuts
Use printing shortcuts to print with print settings that you use often. The printer software has several specially designed printing shortcuts that are available in the Printing
Shortcuts list.
34 Printing tips
NOTE:
When you select a printing shortcut the appropriate printing options are automatically displayed. You can leave them as is or change them.
Use printing shortcuts
Use the Printing Shortcuts tab for the following print tasks:
•
•
•
Photo printing–with white borders
•
•
•
You can also
create your own printing shortcuts.
Create printing shortcuts
In addition to the printing shortcuts that are available in the Printing Shortcuts list, you can create your own printing shortcuts.
If you frequently print on transparency film, for example, you can create a printing shortcut by selecting the Presentation Printing shortcut, changing the paper type to HP Premium
Inkjet Transparency Film, and then saving the modified shortcut under a new name; for example, Transparency Presentations. After creating the printing shortcut, simply select it when printing on transparency film rather than changing the print settings each time.
To create a printing shortcut
1. Open the
Printer Properties dialog box .
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click a printing shortcut.
The print settings for the selected printing shortcut are displayed.
4. Change the print settings to those you want in the new printing shortcut.
5. In the Type new shortcut name here box, type a name for the new printing shortcut, and then click Save.
The printing shortcut is added to the list.
To delete a printing shortcut
1. Open the
Printer Properties dialog box .
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click the printing shortcut that you want to delete.
4. Click Delete.
The printing shortcut is removed from the list.
NOTE:
Only the shortcuts that you have created can be deleted. The original HP shortcuts cannot be deleted.
Set the page order
The page order determines the order in which your multipage documents print.
Set the page order 35
Chapter 7
To set the page order
1. Open the
.
2. Click the Advanced tab.
3. Click Document Options, and then click Layout Options.
4. Select one of the following Page Order options:
• Front to back: Prints the first page of the document last. This setting saves time because you do not have to reorder the printed pages. It is the appropriate setting for most print jobs.
• Back to front: Prints the last page of the document last.
5. Select any other print settings that you want, and then click OK.
Fast/Economical printing
Use Fast/Economical printing to produce draft-quality printouts quickly.
To use Fast/Economical printing
1. Open the
.
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts list, click Fast/Economical Printing.
4. Specify the print settings that you want, and then click OK.
Print multiple pages on a single sheet of paper
Use the printer software to print multiple pages of a document on a single sheet of paper.
The printer software automatically resizes the document text and images to fit on the printed page.
To print multiple pages on a single sheet of paper
1. Open the
.
2. Click the Features tab.
3. In the Pages Per Sheet drop-down list, select the number of pages that you want to appear on each sheet of paper.
4. In the Page Order drop-down list, select a layout for the pages.
A preview of the page order is displayed at the top of the Features tab.
5. Select any other print settings that you want, and then click OK.
Print in grayscale
To print in grayscale
1. Open the
.
2. Click the Color tab.
3. Click Print In Grayscale.
4. In the Print In Grayscale drop-down list, select an option.
5. Select any other print settings that you want, and then click OK.
36 Printing tips
Two-sided printing
Use two-sided printing, also called duplexing, to print on both sides of the paper. Printing on both sides of the paper is not only economical, but environmentally conscious as well.
To print a two-sided document
1. Open the
Printer Properties dialog box .
2. Click the Printing Shortcuts tab.
3. In the Printing Shortcuts drop-down list, click Two-sided (Duplex) Printing.
4. In the Print On Both Sides drop-down list, click Manually.
5. Select any other print settings that you want, and then click OK.
The printer prints the odd-numbered pages first.
6. After the odd-numbered pages have been printed, reload the printed pages with the printed side facing up.
7. Click Continue to print the even-numbered pages.
To create a two-sided document with a binding, see
.
General Everyday printing
Use General Everyday printing to print documents quickly.
•
•
Print preview
Use the print preview function to view a printout on your computer before printing a document. If the printout does not look correct, you can cancel the print job and adjust the print settings as needed.
To preview a printed document
1. Open the
Printer Properties dialog box .
2. Click the Features or the Color tab.
3. Select the Show preview before printing check box.
Two-sided printing 37
Chapter 7
4. Select any other print settings that you want, and then click OK.
Before the document prints, a preview is displayed.
5. Do one of the following:
• Click OK to print the document.
• Click Cancel to cancel the print job. Adjust the print settings as needed before printing the document.
Set a custom paper size
Use the Custom Paper Size dialog box to print on a special paper size.
NOTE:
This feature is not available for all paper types.
To define a custom paper size
1. Open the
.
2. Click the Features tab.
3. In the Size drop-down list, select Custom.
The Custom Paper Size dialog box is displayed.
4. In the Name box, type a name for the custom paper size.
5. In the Width and Length boxes, type the dimensions of the custom paper size.
The minimum and maximum dimensions are displayed beneath Width and Length.
6. Click the unit of measurement: Inches or Millimeters.
7. Click Save to save the custom paper size.
8. Click OK to exit the Custom Paper Size dialog box.
9. To use the custom paper size, select its name in the Size drop-down list.
Select a paper type
When printing a higher-quality document, HP recommends that you select a specific paper type.
To select a specific paper type
1. Open the
.
2. Click the Features tab.
3. Click More in the Paper Type drop-down list, and then select the paper type that you want to use.
4. Click OK.
5. Select any other print settings that you want, and then click OK.
Change the print speed or quality
The HP Deskjet automatically chooses a print quality and speed setting depending on the paper type setting you select. You can also change the print quality setting to customize the speed and quality of the print process.
38 Printing tips
Print quality settings
• Fast Draft produces draft-quality output at the fastest printing speed, while using the least amount of ink.
• Fast Normal produces higher quality output than the Fast Draft setting and prints more quickly than the Normal setting.
• Normal provides the best balance between print quality and speed and is appropriate for most documents.
• Best provides the best balance between high quality and speed and can be used for high quality prints. For most documents, the Best setting prints more slowly than the
Normal setting.
• Maximum dpi optimizes the dots per inch (dpi) that the HP Deskjet prints. Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space. For more information, see
To select a print quality and speed
1. Open the
Printer Properties dialog box .
2. Click the Features tab.
3. In the Paper Type drop-down list, select the type of paper that you have loaded.
4. In the Print Quality drop-down list, select the appropriate quality setting for your project.
Print resolution
The printer software displays the print resolution in dots per inch (dpi). The dpi varies according to the paper type and print quality that you select in the printer software.
To view the print resolution
1. Open the
Printer Properties dialog box .
2. Click the Features tab.
3. In the Paper Type drop-down list, select the type of paper that you have loaded.
4. In the Print Quality drop-down list, select the appropriate print quality setting for your project.
5. Click the Resolution button to view the print resolution dpi.
Maximum dpi
Use maximum dpi mode to print high-quality, sharp images.
To get the most benefit from maximum dpi mode, use it to print high-quality images such as digital photographs. When you select the maximum dpi setting, the printer software displays the optimized dots per inch (dpi) that the HP Deskjet printer will print.
Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk space.
Print resolution 39
Chapter 7
To print in Maximum dpi mode
1. Open the
.
2. Click the Features tab.
3. In the Paper Type drop-down list, click More, and then select the appropriate paper type.
4. In the Print Quality drop-down list, click Maximum dpi.
NOTE:
To view the maximum dpi that the HP Deskjet printer will print, click
Resolution.
5. Select any other print settings that you want, and then click OK.
Resize a document
Use the printer software to print a document that is formatted for one paper size on another paper size. Doing this can be useful if you do not have the correct paper size available.
For example, if you have created a document that is formatted for letter-size paper, but you do not have any letter-size paper available, you can print the document on another paper size that is available.
To resize a document for a different paper size
1. Open the
.
2. Click the Features tab.
3. Click Scale to paper size, and then select the target paper size in the drop-down list.
The target paper size is the size of the paper on which you are printing, not the size for which the document was formatted.
4. Select any other print settings that you want, and then click OK.
Bound two-sided documents
If you want to bind printed pages into a book, you can adjust the print settings to accommodate the binding.
Bound two-sided documents can have a book binding (binding on the side) or a tablet binding (binding at the top). Book binding is the most common type of binding.
To print a two-sided document with a book binding
▲ Follow the
for basic two-sided printing.
To print a two-sided document with a tablet binding
1. Open the
.
2. Click the Features tab.
3. In the Two-sided printing drop-down list, click Manual.
4. Select the following check boxes:
•
Flip Pages Up
•
Preserve Layout
40 Printing tips
5. Select any other print settings that you want, and then click OK.
The printer prints the odd-numbered pages first.
6. After the odd-numbered pages have been printed, reload the printed pages, with the printed side facing up according to the document orientation, portrait or landscape.
Figure 7-1 Portrait
Figure 7-2 Landscape
7. Click Continue to print the even-numbered pages.
Presentation printing
Use Presentation printing to print high-quality documents, including:
•
•
•
Presentation printing 41
8 Printer software
•
Make the HP Deskjet the default printer
.
•
Set the default print settings for all documents.
• Use the
to select printing options.
• Use the
What's This? help to learn more about specific print settings.
•
View the Ink Status window for the approximate ink level of each print cartridge.
• Download
for the latest features and improvements.
Make the HP Deskjet the default printer
You can set the HP Deskjet as the default printer to use from any software program. This means that the HP Deskjet is automatically selected in the printer drop-down list when you click Print from the File menu in a software program.
Windows 2000 users
1. On the Windows taskbar, click Start, point to Settings, and then click Printers.
2. Right-click the HP Deskjet icon, and then click Set as Default Printer.
Windows XP users
1. On the Windows taskbar, click Start, and then click Printers and Faxes.
2. Right-click the HP Deskjet icon, and then click Set as Default Printer.
Set default print settings
The HP Deskjet uses default print settings for all documents unless you specify other settings.
42 Printer software
To save time when printing, set the default print settings to options that you use often.
That way, you do not have to specify the options every time you use the printer.
To change the default print settings
1. Double-click the HP Digital Imaging Monitor icon on the right side of the Windows taskbar.
1 HP Digital Imaging Monitor icon
The HP Solution Center is displayed.
2. In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Settings.
3. Make changes to the print settings, and then click OK.
Printer Properties dialog box
The printer is controlled by software that is installed on your computer. Use the printer software, also known as the printer driver, to change the print settings for a document.
To change the print settings, open the Printer Properties dialog box.
NOTE:
The Printer Properties dialog box is also referred to as the Printing
Preferences dialog box.
To open the Printer Properties dialog box
1. Open the file that you want to print.
2. Click File, click Print, and then click Properties or Preferences.
The Printer Properties dialog box is displayed.
Printer Properties dialog box 43
Chapter 8
NOTE:
The path to the Printer Properties dialog box can vary depending on the software program you are using.
What's This? help
Use the
to learn about the features that you see on the Printer
Properties dialog box.
What's This? help
Use What's This? help to learn more about the available printing options.
To use What's This? help
1. Move the cursor over the feature that you want to learn more about.
2. Click the right mouse button.
The What's This box is displayed.
3. Move the cursor over the What's This? box, and then click the left mouse button.
An explanation of the feature is displayed.
Ink Status window
The Ink Status window is displayed each time the printer prints a file. The window displays the approximate ink level of each print cartridge. To close the Ink Status window, click
Close.
NOTE:
This feature might not be available in your operating environment.
Print cartridge information and ordering
For print cartridge information and to link to HP's Web site for ordering print cartridges, click the Print Cartridge Information button.
Displaying the Ink Status window
If you do not want the Ink Status window to appear when you print, select the Do not
show this again check box in the lower-left corner of the window.
If you previously chose not to show the Ink Status window but now want it to appear when you print, follow these steps:
1. For Windows 2000, click Start, and then click Settings. For Windows XP, click
Start, and then click Printers and Faxes.
A list that includes the printers installed on your computer is displayed.
2. Highlight the printer name, and then right-click to display a list of options.
3. Click Properties.
The Printer Properties dialog box is displayed.
4. Click the Device Settings tab.
5. For Display Ink Status Window, click On, and then click OK.
44 Printer software
Download printer software updates
Download the latest printer software update every few months to ensure you have the latest features and improvements.
To download a printer software update
1. Make sure you are connected to the Internet.
2. From the Windows Start menu, click Programs or All Programs, point to HP, and then click HP Update.
The HP Update window is displayed.
3. Click Next.
HP Update searches the HP Web site for printer software updates.
• If the computer has the most recent version of the printer software installed, No
updates are available for your system at this time is displayed in the
HP Update window.
• If the computer does not have the most recent version of the printer software installed, a list of options to download later versions of the software is displayed in the HP Update window.
4. If a software update is available, select the check box beside the update name.
5. Click Install.
6. Follow the onscreen instructions.
Download HP Photosmart Software
Installing the printer software update you download from the HP Web site does not update the HP Photosmart Software you might have installed on the computer. For information about updating the HP Photosmart Software, see the HP Photosmart Help.
Download printer software updates 45
9 Maintenance
•
•
•
Automatically clean print cartridges
•
•
•
Remove ink from your skin and clothing
•
Manually clean print cartridges
•
•
Install print cartridges
When you need to replace print cartridges, make sure you have the correct print cartridges for your printer, and then install them in the print cartridge cradle.
•
•
•
Printing with one print cartridge
•
Print cartridges
Always install the tri-color print cartridge in the left side of the print cartridge cradle.
Install the black print cartridge in the right side of the print cartridge cradle.
NOTE:
Your printer might be packaged with only a tri-color print cartridge. For better results, install a black print cartridge in addition to the tri-color print cartridge. You can print without a black print cartridge but doing so can cause the printer to print more slowly and printed colors to differ from those you would see if a black print cartridge and a tri-color print cartridge were installed.
To order print cartridges, go to www.hp.com
. Choose your country/region, and then click Buy or Online Shopping.
Selection numbers
When buying replacement print cartridges, look for the print cartridge selection number.
46 Maintenance
You can find the selection number in three places:
• Selection number label: Look at the label on the print cartridge that you are replacing.
1 Selection number label
• Printer documentation: For a list of print cartridge selection numbers, see the reference guide that came with the printer.
• Print Cartridge Information dialog box: For a list of print cartridge selection numbers,
, click the Estimated Ink Level tab, and then click the Print
Cartridge Information button.
Printing with one print cartridge
The printer can operate with only one print cartridge installed. For more information, see
.
Installation instructions
To install a print cartridge
1. Press the Power button to turn on the printer.
2. Open the printer cover.
The print cartridge cradle moves to the center of the printer.
3. Push down on the print cartridge.
Install print cartridges 47
Chapter 9
4. Slide the print cartridge out of the cradle.
1 Press the Power button
2 Open the printer cover
3 Push down on the print cartridge
4 Slide the print cartridge out of the cradle
48 Maintenance
5. Remove the replacement print cartridge from its packaging and carefully remove the plastic tape. Hold the print cartridge so that the copper strip is on the bottom and facing toward the printer.
1 Remove plastic tape
CAUTION:
Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical connections.
Do not remove the copper strips. They are required electrical contacts.
1 Ink nozzles
2 Copper contacts
6. Slide the print cartridge firmly into the cradle at a slight upward angle until you feel resistance.
Install print cartridges 49
Chapter 9
7. Push the cartridge into the cradle.
You hear a snap when the print cartridge is correctly positioned.
8. Close the printer cover.
9.
the print cartridges for optimum print quality.
For information about storing print cartridges, see Maintain print cartridges .
For information about recycling empty print cartridges, see
HP inkjet supplies recycling program .
WARNING!
Keep both new and used print cartridges out of the reach of children.
Align the print cartridges
After installing a print cartridge, align the print cartridges to ensure the best print quality.
To align print cartridges
1. Load Letter or A4 unused plain white paper in the paper tray.
2. Open the printer
3. Click Align the Print Cartridges.
4. Click Align, and then follow the onscreen instructions.
The HP Deskjet prints a test page, aligns the print cartridges, and calibrates the printer. Recycle or discard the test page.
Automatically clean print cartridges
If your printed pages are faded or if they contain ink streaks, the print cartridges might be low on ink or might need to be cleaned. For more information, see
.
If the print cartridges are not low on ink, clean the print cartridges automatically.
To clean the print cartridges
1. Open the printer
2. Click Clean the Print Cartridges.
3. Click Clean, and then follow the onscreen instructions.
If your documents are still faded after cleaning, manually clean the print cartridge contacts .
CAUTION:
Clean print cartridges only when necessary. Unnecessary cleaning wastes ink and shortens the life of the cartridge.
View estimated ink levels
Follow these instructions to view the estimated ink levels of the print cartridges that are installed in the printer:
1. Open the printer
2. Click the Estimated Ink Level tab.
50 Maintenance
NOTE:
If the print cartridges were used before being installed in the printer, or if they are not genuine HP cartridges or have been refilled, the estimated ink levels will not appear on the Estimated Ink Level tab.
The Estimated Ink Level tab also contains print cartridge ordering information. To view this information, click the Print Cartridge Information button.
NOTE:
Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information see www.hp.com/go/inkusage .
Maintain the printer body
Because the HP Deskjet ejects ink onto the paper in a fine mist, ink smudges will eventually appear.
To remove smudges, stains, or dried ink from the exterior
1. Turn off the HP Deskjet, and then disconnect the power cord.
2. Wipe the outside of the HP Deskjet with a soft cloth that has been lightly moistened with water.
CAUTION:
Do not use any type of cleaning solution. Household cleaners and detergents might damage the printer finish. Keep all fluids away from the interior. Do not lubricate the metal rod on which the print cartridge cradle slides. Noise is normal when the cradle moves back and forth.
Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and clothing:
Surface
Skin
White fabric
Color fabric
Remedy
Wash the area with an abrasive soap.
Wash the fabric in cold water and use chlorine bleach.
Wash the fabric in cold water and use sudsy ammonia.
CAUTION:
Always use cold water to remove ink from fabric. Warm or hot water can set the ink into the fabric.
Manually clean print cartridges
If the HP Deskjet is used in a dusty environment, a small amount of debris can accumulate on the print cartridge contacts. This debris can cause ink streaks on printed pages. The problem can be corrected by manually cleaning the print cartridge contacts.
Maintain the printer body 51
Chapter 9
You need the following items to clean the print cartridges:
• Distilled water (tap water can contain contaminants that can damage the print cartridge)
• Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
Be careful not to get ink on your hands or clothing as you clean.
To prepare to clean
1. Open the HP Deskjet cover.
2. Wait until the print cartridge cradle moves to the center of the HP Deskjet and is idle and quiet.
3. Remove the print cartridges and place them on a piece of paper, with the copper strips facing up.
CAUTION:
Do not leave the print cartridges outside the HP Deskjet for more than 30 minutes.
To manually clean print cartridge contacts
1. Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
2. Gently wipe the print cartridge copper contacts with the cotton swab.
CAUTION:
Do not touch the print cartridge ink nozzles. Touching the ink nozzles will result in clogs, ink failure, and bad electrical connections.
1 Ink nozzles (do not touch)
2 Copper contacts
3. Repeat this process until no ink residue or dust appears on the swab.
4. Insert the print cartridges in the HP Deskjet, and then close the cover. For more information, see
52 Maintenance
Maintain print cartridges
Follow these guidelines to maintain and store HP print cartridges and to ensure consistent print quality.
•
Print cartridge storage and handling
•
Print cartridge storage and handling
Follow these guidelines to help maintain HP print cartridges and ensure consistent print quality:
• Install the cartridge on or before the Install by date, which is printed on the cartridge package.
• When you remove a photo print cartridge from the printer, store it in a print cartridge protector to prevent the ink from drying out. If you do not have a print cartridge protector, you can use an airtight plastic container to protect your print cartridge. For more information, see
• Keep all unused print cartridges in their original sealed packages until they are needed. Store print cartridges at room temperature (15° to 35° C or 59° to 95° F).
• Do not remove the plastic tape covering the ink nozzles until you are ready to install the print cartridge in the printer. If the plastic tape has been removed from the print cartridge, do not attempt to reattach it. Reattaching the tape damages the print cartridge.
CAUTION:
Always turn the printer off with the Power button before you unplug the power cord or turn off a power strip. This allows the printer to store the print cartridges properly. When you store the printer, always leave the active print cartridges inside the printer.
Print cartridge protector
If you have purchased an HP photo print cartridge, you can store it in the protector that comes with the print cartridge. If you do not have a print cartridge protector, you can use an airtight plastic container to protect your print cartridge.
To insert the print cartridge into the print cartridge protector
▲ Slide the print cartridge at a slight angle into the protector, and snap it securely in place.
Maintain print cartridges 53
Chapter 9
To remove the print cartridge from the print cartridge protector
1. Press down and back on the top of the protector to release the print cartridge.
2. Slide the print cartridge out of the protector.
CAUTION:
Do not drop the print cartridge. Dropping the print cartridge can damage it.
Printer Toolbox
The printer Toolbox contains a number of useful tools to enhance the performance of the printer.
Use the printer Toolbox to perform the following tasks:
•
•
•
•
To open the printer Toolbox
1. Open the
.
2. Click the Features tab, and then click the Printer services button.
The Toolbox is displayed.
54 Maintenance
10 Troubleshooting
•
•
•
•
•
•
•
•
•
Problems with borderless documents
•
•
•
If you continue to have problems
Error messages
If an error message displays on the computer screen, check the following topics for a solution:
•
Print cartridge error messages
•
Print cartridge error messages
If you receive a print cartridge error message, follow these directions.
Incorrect or missing print cartridge message
The printer can only print when the correct print cartridges are installed. If you receive a print cartridge error message, one or both of the print cartridges cannot be used in the printer.
To resolve the problem, follow the instructions in Incorrect or missing print cartridge .
Print cartridge problem message
The printer cannot print if the print cartridges are faulty, or if they are not installed properly.
If you receive a message stating there is a problem with a print cartridge, follow the instructions in
Print cartridge is faulty or not installed properly to resolve the problem.
"Print cartridge carriage is stalled" message
If the printer stalls while you are printing a document, follow the instructions in
.
Troubleshooting 55
Chapter 10
"Print cartridge is in the wrong slot" message
If you receive this error message, the print cartridge is installed in the wrong side of the
"Printing in ink-backup mode" message
If you receive this error message, follow the instructions in
Incorrect or missing print cartridge
.
Other error messages
If you receive an error message, follow these directions.
Out of paper message
If you receive an out of paper message, follow the guidelines in
.
"There was an error writing to USB port" message
The printer might not be receiving correct data from another USB device or USB hub.
Connect the printer directly to the USB port on the computer.
"Two-way communication cannot be established" or "Printer not responding" message
The printer might not be able to communicate with the computer if the USB cable is too long.
If you receive this error message, make sure that the USB cable is not greater than 3 meters (approximately 9.8 feet) in length.
NOTE:
For best printing performance, use a USB 2.0 compatible cable.
Installation problems
If the software installation program stops or fails, check the following topics for more information:
•
•
"Unknown Device" message displays
•
If you continue to have problems, visit HP Technical Support at www.hp.com/support .
Installation program stops
Cause: If the installation program stops when it looks for new hardware, one of the following issues is causing a communication problem:
• The USB cable is old or defective.
• Software, such as an antivirus program, is running.
• Another device, such as a scanner, is connected to the computer.
56 Troubleshooting
Solution:
To resolve the problem
1. Make sure that no USB devices other than the printer, the keyboard, and the mouse are connected to the computer.
2. Disconnect and reconnect the USB cable.
3. Make sure that the printer is connected directly to a USB port on the computer
(instead of through a USB hub).
4. If the installation program still does not locate the printer, replace the USB cable, and then continue to the next step.
5. Click Cancel, and then restart the computer.
6. Turn the printer off, and then disconnect the USB cable and power cord.
7. Quit any antivirus programs or other software programs that are running on the computer.
NOTE:
To quit an antivirus program, follow the manufacturer’s instructions.
8. Reinstall the printer software:
a. Insert the printer software CD into the drive.
b. Follow the onscreen instructions. When the installation program prompts you, connect the USB cable and the power cord to the printer, and then make sure that the printer is on.
NOTE:
Do not connect the USB cable until you are told to do so.
c. Follow the onscreen instructions to finish the installation.
9. Restart the antivirus program.
"Unknown Device" message displays
Cause: During installation, an “Unknown Device” message might be displayed when you connect a USB cable between the printer and the computer. A possible cause might be a defective USB cable.
Solution:
NOTE:
This is not a problem if you are using Windows 2000. If you are using
Windows 2000 and this message is displayed, you can continue with the software installation.
To resolve the problem
1. Disconnect the USB cable from the printer.
2. Disconnect the power cord from the printer.
3. Wait approximately 30 seconds.
4. Reconnect the power cord to the printer.
5. Reconnect the USB cable to the printer.
6. If the “Unknown Device” message is still displayed, replace the USB cable.
Installation problems 57
Chapter 10
Printer name does not appear
Solution: If the printer software seems to install correctly, but the printer name does not appear in the list of printers when you click Print on the File menu or in the Printers folder in Control Panel, try reinstalling the printer software.
To reinstall the printer software
1. Quit any antivirus programs or other software programs that are running on the computer.
NOTE:
To quit an antivirus program, follow the manufacturer’s instructions.
2. Uninstall the printer software:
a. Insert the printer software CD into the drive, and then follow the onscreen instructions.
NOTE:
If the installation program does not start automatically, click your
CD drive letter in Windows Explorer, then double-click the setup.exe file.
For example, double-click D:\setup.exe.
b. When prompted, click Remove All.
3. Reinstall the printer software:
a. Insert the printer software CD into the drive.
b. Follow the onscreen instructions to finish the installation.
4. Restart the antivirus program.
Power light is on or flashing
1 Power light
• If the Power light is on, the printer is either printing or ready to print.
• If the Power light is off, the printer is off.
• If the Power light is flashing, see the following information.
•
•
•
58 Troubleshooting
What the flashing light means
The Power light can flash for several reasons:
• The printer cover is open.
• The printer is out of paper.
• A problem exists with the printer, such as a paper jam or a problem with a print cartridge.
For information about clearing a paper jam, see
.
If an error message appears
Read the error message that explains the problem and its solution.
If no error message appears
Check the status of the printer by using the printer tools. To gain access to the tools, open
the Printer Properties dialog box , click the Features tab, and then click the Printer
services button.
Use the printer tools to perform the following tasks:
• View estimated ink levels.
• Clean the print cartridges.
• Calibrate the printer.
• Print a test page.
• Perform other functions as needed.
Printer does not print
•
•
Check the printer cable connection
•
•
•
If the printer still does not print
Verify the following
Verify the following conditions if the printer is not printing:
• The printer is connected to the power source.
• The cable connections are secure.
• The printer is turned on.
• The print cartridges are the correct print cartridges for the printer and are properly installed.
For more information, see
and Installation instructions .
• The paper or other media is correctly loaded in the paper tray.
• The printer cover is closed.
• The rear access door is attached.
Printer does not print 59
Chapter 10
Check the printer cable connection
If your printer and computer are connected with a USB cable and the devices are not communicating with each other, try the following:
• Make sure the power cord is firmly connected to the printer and plugged into a power outlet.
• Check the USB cable. If you are using an older cable, it might not be working properly.
If you experience problems, the USB cable might need to be replaced. Also verify that the cable does not exceed 3 meters (9.8 feet) in length.
• Check the connection from your printer to your computer. Verify that the USB cable is securely plugged into the USB port on the back of your printer. Make sure the other end of the USB cable is plugged into a USB port on your computer. After the cable is connected properly, turn your printer off and then on again.
• If you are connecting the printer through a USB hub, make sure the hub is turned on.
If the hub is on, try connecting the printer directly to your computer.
• Try connecting the USB cable to another USB port on your computer. After you check the connections, try restarting your computer. Turn your printer off and then on again.
NOTE:
For best printing performance, use a USB 2.0 compatible cable.
Clear the print queue
Cause: When you start a print job, it is sent to a list called the “print queue.” If the printer stops printing before the job is complete, the print job might be stalled in the print queue.
Solution:
To resolve a print job that is stalled in the queue
1. For Windows 2000, click Start, click Settings, and then click Printers. For
Windows XP, click Start, and then click Printers and Faxes.
2. Double-click the name of the HP Deskjet printer.
3. Click the Printer menu, and then click Pause Printing.
4. Click the Printer menu again, and then click Cancel All Documents.
5. Click Yes to confirm the cancellation.
6. Click the Printer menu, and then uncheck Pause Printing.
7. If there are still documents in the list, restart the computer.
8. After restarting, if there are still documents in the list, repeat steps 1 – 6.
After resolving a print job that is stalled in the print queue, the print queue still might not be clear. In that situation, you need to stop and then restart the print service.
To stop and restart the print service
1. For Windows 2000, click Start, click Control Panel, and then click
Administrative Tools. For Windows XP, click Start, click Control Panel, click
Performance and Maintenance, and then click Administrative Tools.
2. Double-click Services, and then double-click Print Spooler.
60 Troubleshooting
3. Click Stop, and then click Start to restart the print service.
4. Click OK to close the window.
Printer is stalled
If the printer stalls while printing a document, raise the printer cover, and then disconnect the power cable from the back of the printer.
CAUTION:
First, check for any loose or broken parts in the printer. If you find loose or broken parts, go to www.hp.com/support .
If there are no loose or broken parts, follow these steps:
1. Check for and remove any obstacles, such as packing tape or materials, that prevent the print cartridges from moving back and forth.
2. Make sure the print cartridges are installed securely in the print cartridge cradle.
For more information, see
3. Make sure the tri-color print cartridge is installed in the left side of the cradle and the black print cartridge is installed in the right side of the cradle.
4. Check for and clear any paper jam.
For more information, see
5. Lower the printer cover.
6. Connect the power cable to the back of the printer, and then turn on the printer.
If the printer still does not print
1. Select the topic below that best describes the problem:
•
•
•
2. If the printer still does not print, shut down, and then restart your computer.
Document prints slowly
Multiple software programs are open
The computer resources are insufficient for the printer to print at its optimum speed.
To increase printer speed, close all unnecessary software programs when printing.
Complex documents, graphics, or photos are printing
Documents containing graphics or photos print more slowly than text documents.
Best or Maximum dpi print mode is selected
The printer prints more slowly when Best or Maximum dpi is selected as the print quality.
To increase the printer speed, select a different print quality mode.
Document prints slowly 61
Chapter 10
Printer is in ink-backup mode
The printer might print more slowly if it is in ink-backup mode. For more information, see
.
To increase the print speed, use two print cartridges in the printer.
Printer software is outdated
Outdated printer software might be installed.
For information about updating the printer software, see
Download printer software updates
.
Computer does not meet system requirements
If your computer does not have enough RAM or a large amount of free space on the hard drive, the printer processing time will be longer.
1. Verify that the computer hard disk space, RAM, and processor speed meet the system requirements.
The system requirements are listed in the reference guide that came with the printer.
2. Make space available on the hard drive by deleting unwanted files.
Print cartridge problems
•
Incorrect or missing print cartridge
•
Print cartridge is faulty or not installed properly
•
"Print cartridge is in the wrong slot" message
•
•
"Printing in ink-backup mode" message
Incorrect or missing print cartridge
Cause: If the correct print cartridges have not been installed or if the print cartridges are missing, the printer cannot print.
62 Troubleshooting
Solution:
To verify and install the correct print cartridges
1. Open the printer cover.
2. Read the selection number on the print cartridge label.
1 Selection number
3. Check the list of print cartridges that can be used in the printer.
a. Open the printer
b. Click the Estimated Ink Levels tab.
c. Click the Print Cartridge Information button and view the list of print cartridge selection numbers.
The reference guide that came with the printer also shows the print cartridge selection numbers.
4. If the print cartridge selection number is correct, try cleaning the print cartridge.
For more information, see
Manually clean print cartridges .
5. If the print cartridge has the wrong selection number, install a new print cartridge.
For more information, see
6. Close the printer cover.
If the Power light is not flashing, then the problem is fixed.
If the Power light is flashing, visit HP Technical Support at www.hp.com/support .
Print cartridge is faulty or not installed properly
Cause: The printer cannot print if the print cartridges are faulty, or if they are not installed properly.
Print cartridge problems 63
Chapter 10
Solution:
To resolve the problem
1. Raise the printer cover.
2. Do one of the following:
• If an error message is displayed on screen, remove the print cartridge that is named in the error message. Go to step 3.
• If an error message is not displayed, remove and reinstall each print cartridge and close the printer cover.
If the Power light is not flashing, the problem is solved.
If the Power light is flashing, go to step 4.
3. Reinstall the print cartridge and close the printer cover. For more information, see
.
If the Power light is not flashing, the problem is solved.
If the Power light is flashing, go to step 4.
4.
the print cartridge.
5. Reinsert the print cartridge in the printer and close the printer cover.
If the Power light is still flashing, the print cartridge is faulty and must be replaced.
NOTE:
You can print with one print cartridge in ink-backup mode if you do not have a replacement print cartridge available. For more information, see
6. If the Power light continues to flash after replacing the print cartridge, visit HP
Technical Support at www.hp.com/support .
"Print cartridge is in the wrong slot" message
Cause: If you receive this error message, the print cartridge is installed in the wrong side of the print cartridge cradle.
Solution: Always install the tri-color print cartridge in the left print cartridge cradle compartment.
Install the black print cartridge in the right print cartridge cradle compartment.
Low on ink
Cause: At least one of the print cartridges is estimated to be low on ink and may need to be replaced soon.
Solution: Have a replacement cartridge on hand to avoid printing interruptions. You do not have to replace the cartridge until print quality deteriorates. If you have installed a refilled or remanufactured print cartridge, or a cartridge that has been used in another printer, the ink level indicator will be inaccurate or unavailable.
For information on how to replace print cartridges, see
64 Troubleshooting
"Printing in ink-backup mode" message
Cause: When the printer detects that only one print cartridge is installed, ink-backup mode is initiated. This printing mode lets you print with a single print cartridge, but it slows the printer and affects the quality of printouts.
Solution: If you receive the ink-backup mode message and two print cartridges are installed in the printer, verify that the protective piece of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts, the printer cannot detect that the print cartridge is installed.
To remove plastic tape from a print cartridge
▲ Hold the print cartridge so that the copper strips are on the bottom and facing toward the printer, and then carefully remove the plastic tape.
1 Remove plastic tape
CAUTION:
Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical connections. Do not remove the copper strips. They are required electrical contacts.
Paper problems
•
•
•
•
Printer prints on multiple sheets at once
Paper jam
To clear a paper jam
1. Remove the paper from the paper tray.
2. If you are printing labels, verify that a label did not become detached from the label sheet while passing through the printer.
3. Turn off the printer.
4. Disconnect the printer power cord from the electrical outlet.
Paper problems 65
Chapter 10
5. Remove the rear access door. Press the handle to the right, and then pull out the door.
6. Remove the paper jam from the back of the printer, and then replace the rear access door securely.
7. If the paper jam cannot be removed from the back of the printer, raise the printer cover, remove the paper jam from the front of the printer, and then lower the cover.
CAUTION:
Remove the paper jam carefully as it is possible to damage the printer when removing paper from the front.
8. Reload paper in the paper tray.
9. Reconnect the printer power cord to the electrical outlet.
10. Turn on the printer.
11. Reprint the document.
NOTE:
If paper jams occur frequently, try using a heavier paper. See
Printer specifications for paper weight specifications.
66 Troubleshooting
Printer does not feed paper
Solution: Try one or more of the following solutions:
• Reduce the number of sheets in the paper tray.
• Remove the paper from the paper tray, and then reload it.
• Use a different type of paper.
Out of paper message
Follow the appropriate steps for the condition that exists.
•
•
If the paper tray is loaded
1. Verify the following:
• A sufficient amount of paper is loaded in the paper tray (at least ten sheets).
• The paper tray is not overly full.
• The paper stack is touching the back of the paper tray.
2. Slide the paper guide so that it fits firmly against the edge of the paper.
3. Click Continue to resume printing.
If the paper tray is empty
1. Load paper in the paper tray.
2. Push the paper forward until it stops.
3. Slide the paper guide so that it fits firmly against the edge of the paper.
4. Click Continue to resume printing.
Printer prints on multiple sheets at once
If the printer prints on multiple sheets at once, check the following:
•
•
Paper might be loaded improperly
Paper weight
The printer might print on multiple sheets of paper at once if the paper is under the
. Use paper that is within the recommended specifications.
Paper might be loaded improperly
The printer might print on multiple sheets of paper at once if the paper is loaded too far toward the back of the printer or if the paper guide is not positioned firmly against the paper. Reload the paper into the paper tray, pushing the paper until you feel resistance, and then slide the paper guide firmly against the edge of the paper stack.
The printer also might print on multiple sheets if different paper types are loaded in the printer. For example, photo paper might be mixed with plain paper. Empty the paper tray and load only the paper type that is appropriate for the document that you are printing.
Paper problems 67
Chapter 10
Photos do not print correctly
•
•
Check the paper tray
1. Verify that the photo paper is placed in the paper tray with the side to be printed on facing down.
2. Slide the paper forward until it stops.
3. Slide the paper guide firmly against the edge of the paper.
Do not press the guide so firmly against the paper that the paper bends or curls.
Check the printer properties
Open the
and verify the following options:
Tab
Features
Setting
Size: An appropriate paper size
Paper Type: An appropriate photo paper
Print Quality: Best or Maximum dpi
Problems with borderless documents
•
Borderless printing guidelines
•
•
Fading occurs on the edges of a photo
•
Borderless printing guidelines
When printing borderless photos or brochures, follow these guidelines:
• Verify that the paper size that is specified in the Paper Size drop-down list on the
Printing Shortcuts tab matches the size of the paper that is loaded in the paper tray.
• Select the appropriate paper type in the Paper Type drop-down list on the Printing
Shortcuts tab.
• If printing in grayscale, select High Quality under Print in Grayscale on the Color tab.
• Do not print borderless documents in ink-backup mode. Always have two print cartridges installed in the printer when printing borderless documents.
For more information, see
68 Troubleshooting
Image is printed at an angle
Verify that no problem exists with the source image. For example, if you are printing a scanned image, verify that the image was not crooked when it was scanned.
If the problem is not caused by the source image, follow these steps:
1. Remove all paper from the paper tray.
2. Load the photo paper correctly in the paper tray.
3. Verify that the paper guide fits firmly against the edge of the paper.
4. Follow loading instructions for the paper type.
Fading occurs on the edges of a photo
Verify that the photo paper is not curled. If the photo paper is curled, place the paper in a plastic bag and gently bend it in the opposite direction of the curl until the paper lies flat. If the problem persists, then use photo paper that is not curled.
For instructions about preventing photo paper from curling, see
.
Photo has an unwanted border
•
•
For small photo paper with a tear-off tab
Problems with borderless documents 69
Chapter 10
For small photo paper
If the printout has an unwanted border, try the following solutions:
•
.
• Open the
, click the Features tab, and verify that the selected paper size matches both the paper size that the photo is formatted for and the size of the paper that is loaded in the printer.
• Verify that no problem exists with the source image. For example, if you are printing a scanned image, verify that the image was not crooked when it was scanned.
• Verify that the software application you are using supports borderless printing.
For small photo paper with a tear-off tab
If the border appears below the tear-off tab, then remove the tab.
If the border appears above the tear-off tab, then align the print cartridges
.
70 Troubleshooting
Print quality is poor
If you are having problems with print quality, try the solutions in this section and observe the following guidelines:
• Replace refilled or empty cartridges.
• Check the device settings to make sure that the print mode and paper selection is correct for the paper and the task.
For more information, see
.
• Print and evaluate a self-test.
For more information, see
.
If the self-test shows a defect, try the following:
•
• If there are ink streaks in your prints, clean the electrical contacts. For more information, see
Manually clean print cartridges .
• Replace the print cartridge. For more information, see
• If the self-test does not show a problem, investigate other causes, such as the image file or software program.
For additional print cartridge troubleshooting, visit the HP Web site at www.hp.com/ support .
This section contains the following topics:
•
•
•
Faded prints with ink streaks
Solution: If your printed pages faded or if they contain ink streaks, the print cartridges might be low on ink or might need to be cleaned. For more information,
see View estimated ink levels and Automatically clean print cartridges .
Prints are faded
Solution:
• Verify that neither of the print cartridges is low on ink.
For more information, see
View estimated ink levels . If a print cartridge is low on
ink, consider replacing the print cartridge. For the correct part numbers, see the reference guide that came with the printer.
• Verify that a black print cartridge is installed.
If the black text and images on your printouts are faded, you might be printing with only the tri-color print cartridge. Insert a black print cartridge, in addition to the tri-color print cartridge, for optimal black print quality.
Print quality is poor 71
Chapter 10
• Verify that the protective piece of plastic tape has been removed from the print cartridges.
1 Remove plastic tape
• Consider selecting a higher
Blank pages print
Solution:
• The protective piece of plastic tape might still be attached to the print cartridges.
Verify that the plastic tape has been removed from the print cartridges.
1 Remove plastic tape
• The print cartridges might be out of ink. Replace one or both empty print cartridges.
For more information, see
.
Document is misprinted
•
Text and images are misaligned
•
Document is printed off-center or at an angle
•
Parts of the document are missing or printed in the wrong place
•
Envelope is printed at an angle
•
Document does not reflect the new print settings
72 Troubleshooting
Text and images are misaligned
If the text and images on your printouts are misaligned, then
Document is printed off-center or at an angle
1. Verify that only one type of paper is placed in the paper tray, and that the paper has been placed in the tray correctly.
2. Verify that the paper guide fits firmly against the edge of paper.
3. Reprint the document.
Parts of the document are missing or printed in the wrong place
Open the
Printer Properties dialog box and confirm the following options:
Tab
Features
Setting
Portrait or Landscape: Verify the appropriate orientation.
Size: Verify the appropriate paper size.
Scale to paper size: Select this option to scale text and graphics to the paper size specified in the corresponding drop-down list.
If parts of the document are still missing, the printer settings might be overridden by the software program print settings. Select the appropriate print settings from within the software program.
Envelope is printed at an angle
1. Slide the flap inside the envelope before loading it in the printer.
2. Confirm that the paper guide fits firmly against the edge of the envelope.
3. Reprint the envelope.
Document does not reflect the new print settings
The printer settings might differ from the software program print settings. Select the appropriate print settings within the software program.
If you continue to have problems
If you continue to have problems after investigating the troubleshooting topics, shut down your computer and then restart it.
If you still have questions after restarting your computer, visit HP Technical Support at www.hp.com/support .
For information about the support process, see
If you continue to have problems 73
A HP support
•
Ink cartridge warranty information
•
•
Ink cartridge warranty information
The HP cartridge(s) warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached. The end of warranty date, in YYYY/MM/DD format, may be found on the product as indicated:
For a copy of the HP Limited Warranty Statement, see the Reference Guide that came with the printer.
Support process
If you have a problem, follow these steps
1. Check the documentation that came with the HP Deskjet.
2. Visit the HP online support Web site at www.hp.com/support . HP online support is available to all HP customers. It is the fastest source for up-to-date device information and expert assistance and includes the following features:
• Fast access to qualified online support specialists
• Software and driver updates for your HP Deskjet
• Valuable HP Deskjet and troubleshooting information for common problems
• Proactive device updates, support alerts, and HP newsgrams that are available when you register your device
3. For Europe only: Contact your local point of purchase. If your device has a hardware failure, you will be asked to bring it back to your local point of purchase. (Service is provided at no charge during the device limited warranty period. After the warranty period, you will be quoted a service charge.)
4. Call HP support. Support options and availability vary by device, country/region, and language.
74 HP support
HP support by phone
•
•
•
After the phone support period
Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin America (including
Mexico). To determine the duration of phone support in Europe, the Middle East, and Africa, go to www.hp.com/support . Standard phone company charges apply.
Placing a call
Call HP support while you are in front of the computer and the HP Deskjet. Be prepared to provide the following information:
• Device model number (located on the label on the front of the device)
• Device serial number (located on the back or bottom of the device)
• Messages that appear when the situation occurs
• Answers to these questions:
• Has this situation happened before?
• Can you re-create it?
• Did you add any new hardware or software to your computer at about the time that this situation began?
• Did anything else occur prior to this situation (such as a thunderstorm, device was moved, etc.)?
After the phone support period
After the phone support period, help is available from HP at an additional cost. Help may also be available at the HP online support Web site: www.hp.com/support . Contact your HP dealer or call the support phone number for your country/region to learn more about support options.
HP support by phone 75
B Order supplies
You can order HP products, such as recommended types of paper and print cartridges, online from the HP Web site.
This section contains the following topics:
•
•
•
Order paper or other media
To order HP papers and other supplies, such as HP Premium Photo Papers, go to www.hp.com/ buy/supplies . If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page.
Order print cartridges
For a list of print cartridge numbers, see the printed documentation that came with the HP Deskjet.
You can also use the software that came with the HP Deskjet to find out the reorder number for all the print cartridges. You can order print cartridges online from the HP Web site. Additionally, you can contact a local HP reseller to find out the correct print cartridge reorder numbers for your device and purchase print cartridges.
To order HP papers and other supplies, go to www.hp.com/buy/supplies . If prompted, choose your country/region, follow the prompts to select your product, and then click one of the shopping links on the page.
NOTE:
Ordering print cartridges online is not supported in all countries/regions. If it is not supported in your country/region, contact a local HP reseller for information about purchasing print cartridges.
To order print cartridges through the HP Solution Center
1. In the HP Solution Center, click the tab that lists your HP Deskjet.
The Shopping Center page is displayed.
2. Click the Buy online button.
The Print Cartridge Information page is displayed.
3. Click Shop Online.
A privacy information page is displayed.
4. Click Send.
The Shop for Supplies window is displayed with a list of compatible cartridges for your printer.
Order other supplies
To order other supplies, such as HP Deskjet software, a copy of the Setup Guide or other printed documentation, or other customer-replaceable parts, call the phone number for your country/region.
Country/region
Asia Pacific (except for Japan)
Australia
Europe
Number for ordering
65 272 5300
1300 721 147
+49 180 5 290220 (Germany)
76 Order supplies
(continued)
Country/region
New Zealand
South Africa
U.S. and Canada
Number for ordering
+44 870 606 9081 (U.K.)
0800 441 147
+27 (0)11 8061030
1-800-474-6836 (1-800-HP-INVENT)
To order supplies in other countries/regions not listed in the table, go to www.hp.com/support . If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Order other supplies 77
C Technical information
•
•
Environmental product stewardship program
•
Printer specifications
The HP Deskjet has the following specifications and requirements.
Software compatibility
Windows compatible (2000 and XP)
Physical specifications
Printer dimension (with the tray extended): 142 mm high x 422 mm wide x 315.76 mm deep (5.6
inches high x 16.6 inches wide x 12.43 inches deep)
Printer weight (without print cartridges): 2.04 kg (4.5 lbs)
Memory
384 KB integrated memory
Minimum system requirements
Operating system
Processor RAM Hard disk space
Windows 2000 and XP Pentium II or equivalent 64 MB 200 MB
1 For information about future operating system releases and support, visit the HP online support
Web site at www.hp.com/support.
NOTE:
For best printing performance, use a USB 2.0 compatible cable.
Paper tray capacity
Plain paper sheets: Up to 80
Paper size
For a complete list of supported media sizes, see the printer software.
Paper weights
Letter Paper: 65 to 90 g/m² (16 to 24 lb)
Legal Paper: 70 to 90 g/m² (20 to 24 lb)
Envelopes: 70 to 90 g/m² (20 to 24 lb)
Cards: Up to 200 g/m² (110-lb index maximum)
Photo Paper: Up to 280 g/m² (75-lb index maximum)
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been designed to separate easily. Fasteners and other connections are easy to locate, access, and remove using common tools. High priority parts have been designed to access quickly for efficient disassembly and repair.
78 Technical information
For more information, visit HP’s Commitment to the Environment Web site at: www.hp.com/hpinfo/globalcitizenship/environment/index.html
This section contains the following topics:
•
•
•
•
•
HP inkjet supplies recycling program
•
•
Disposal of Waste Equipment by Users in Private Households in the European Union
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at: www.hp.com/go/msds
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions, and partners with some of the largest electronic recycling centers throughout the world. HP conserves resources by reselling some of its most popular products. For more information regarding recycling of HP products, please visit:
For more information regarding recycling of HP products, please visit: www.hp.com/hpinfo/globalcitizenship/environment/recycle/
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more information, go to the following Web site: www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Energy consumption
This product is designed to reduce power consumption and save natural resources without compromising product performance. It has been designed to reduce total energy consumption both during operation and when the device is not active. Specific information on power consumption may be found in the product specifications.
Environmental product stewardship program 79
Appendix C
Disposal of Waste Equipment by Users in Private Households in the European Union
80 Technical information
Regulatory notices
•
•
•
•
VCCI (Class B) compliance statement for users in Japan
•
Notice to users in Japan about power cord
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Modifications (part 15.21): The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment.
For further information, contact the Manager of Corporate Product Regulations, Hewlett-Packard
Company, 3000 Hanover Street, Palo Alto, CA 94304, (650) 857-1501.
LED indicator statement
The display LEDs meet the requirements of EN 60825-1.
Notice to users in Korea
VCCI (Class B) compliance statement for users in Japan
Regulatory notices 81
Appendix C
Notice to users in Japan about power cord
82 Technical information
Index
A
B
buttons
C
cleaning print cartridges
print cartridges manually 51 printer body 51
D
default print settings 42 default printer 42
document is misprinted document is printed off-
document prints slowly complex documents are
multiple programs are
printer software is
outdated 62 system requirements 62
E
environment
Environmental product
Environmental information material safety data
sheets 79 paper use 79 plastics 79 recycling program 79
error messages
European Union
F
G
H
Hewlett-Packard Company
HP Photosmart Software
I
ink
ink, removing ink from skin and
installation
installing print cartridges 46
L
lights
M
maintenance
O
order
P
paper
phone support period
photo has unwanted border
photo paper, storing and
photo printing
83
photo printing problems
photos
power light is flashing if an error message
if no error message
print cartridge problems
print cartridges
aligning 50 cleaning automatically 50
print with one print
print quality
print settings
printer does not feed paper 67
printer name does not appear 58
printer prints on multiple sheets
printer software
printing
4800 x 1200 optimized
index cards and small
multiple pages on single
Printing Shortcuts tab 34 printing tips 34
problems with borderless documents for small photo paper with a
R
recycle
regulatory notices
notice to users in Japan
notice to users in Japan
(VCCI) 81 notice to users in Korea 81
removing ink from skin and
S
T
terms and conventions in
troubleshooting borderless printing
borderless printing
document does not reflect
installation program
multiple pages print at
parts of the document are missing or in wrong
84
Index
poor print quality 71 print is faded 71
printer does not feed
printer name does not
text and images are
unwanted border on
U
updates
USB
W
85
86
İndir
Herkese açık bağlantı güncellendi
Sohbetinize giden herkese açık bağlantı güncellendi. You may view and manage your chat links after registration here.
Belge herkese açık bağlantısı
Reklam