Retractable Bluetooth

®

Headset

Operating Instructions

Contents

Components

Headset Overview

Retractable Mechanism

Incoming Call Alert and Anti-Lost Function

How to Wear Your Headset

Charging Your Headset

Getting Started

Pairing Your Headset with a Bluetooth

®

............ 3

............ 3

............ 4

............ 5

............ 6

............ 7-9

............ 10

............ 11 wireless technology enabled phone

Pairing Your Headset with Two Bluetooth

® wireless technology enabled phone (Multi-point) ............ 12

Reconnecting Your Headset

Using Your Headset

Troubleshooting

Safety Precautions

Maintenance

Declaration of Conformity

FCC Compliance Statement

Limited Warranty

............ 11

............ 13

............ 14-16

............ 17-18

............ 19

............ 20

............ 21

............ 21-22

............ 23

2

Bluetooth® Specification:

Bluetooth® Profiles Supported:

Operating Distance:

Operating Temperature:

Charging Time*:

Talk Time*:

Standby Time*:

Battery Type and Capacity: v2.1+EDR

Headset and Handsfree

10 meters

0-50 degree celsius

Around 1.5 - 2 hours

Up to 7 hours

Up to 240 hours

Rechargeable Li-Polymer 100mAh

Dimension:

Weight:

55(L) x 25.5(W) x 14(H) mm

23g

*May be varied by mobile phone settings and operator

Components

Thank you for choosing the Halo Retractable Headset. We hope you enjoy it!

Inside the package, you should find:

1x Retractable Headset

1x USB Cable

1x Charger

1x User Manual

2x Inear Cushion (L and S size each)

1x Neck Strap

1

3

2

Retractable Bluetooth Headset Overview

4

5

6

7

1. Rewind Button

2. Status Indicator

3. Multi-function Button (MFB)

4. Volume Button

5. Microphone

6. Speaker

7. Clip

8. Micro USB Charging Socket

9. Neck Strap hole

8

9

Retractable Mechanism

PULL

PRESS

Incoming Call Alert and Anti-Lost Function

Retractable Bluetooth Headset

Incoming Call Alert Function

It will have “Beep” sound when It has an out of range alert, you have an incoming call, to prevent reminds you that your mobile phone

!!

Call

How to Wear Your Headset

Retractable Bluetooth Headset is designed,

How to Wear Your Headset

(cont’d)

B. fasten by a neck strap to wear comfortably and securely around your neck

Step 1. Loop the thin end of the neck strap through the slot in the Headset.

Step 2. Loop the thicker side of the neck strap through the loop created by the thin wire and pull until snug.

Step 3. Once pulled through, you can wear your Headset around your neck.

8

How to Wear Your Headset

(cont’d)

B.

To release the strap, hold the strap and pull outwardly.

(See the picture on left)

Use the provided neck strap only.

It may be necessary to bring the microphone closer to your mouth for lowering background noise.

9

Charging Your Headset

charger into the power source and connect the other end to micro USB charging

Status Status Indicator

Red light ON

OFF seconds

OFF

Audio (Earpiece)

No sound

No sound seconds

No sound

Getting Started

Turning Your Headset On and Off:

A. Turning on

Press and hold the MFB until a “beep” and the status indicator flashes blue.

B. Turning off

Press and hold the MFB until a “beep” and the status indicator flashes red.

Pairing Your Headset with a Bluetooth wireless technology enabled device

1. Turn on the Bluetooth function in the device.

2. Place the headset and the device where they are visible, within arm’s length

from each other.

3. Ensure the headset is OFF.

4. To activate the device’s pairing mode, press and hold the MFB until the

status indicator flashes blue and red alternatively.

5. Search the headset, select “HALO-R” and enter the passcode “0000”. If

your device supports “Simple Pairing” function, no code is required.

6. When the pairing is complete, the headset’s status indicator will flash blue.

Pairing Your Headset with Two Blue- tooth® wireless technology enabled devices (Multi-point)

UA-24XB-B supports a Multi-point function to allow simultaneous pairing of the headset with two devices.

1. Pair the headset with the first device (follow the step in “Pairing Your Headset

with a Bluetooth wireless technology enabled device”).

2. Turn off the headset and the first paired device is then disconnected

automatically.

3. Pair the headset with the second device (follow the step in “Pairing Your

Headset with a Bluetooth wireless technology enabled device”).

4. Activate the Bluetooth connection with the headset and the first paired device

on the device’s menu.

• For some devices, you may need to manually press “connect” to connect the headset.

• If the pairing cannot be completed within two minutes, the headset will automatically go to standby mode and then turn off after three minutes. Repeat steps to pair both devices again.

12

Reconnecting Your Headset

1. If the headset has been powered off, it will automatically reconnect to the phone upon turning the headset back on. If it does not automatically reconnect to the phone, press the MFB (Multi Function Button) once to manually reconnect the device.

2. If the phone has been powered off and as a result the headset gets disconnected, once the phone is turned back on, press the MFB (Multi Function

Button) once to reconnect to the phone again. If the headset is left untouched after the phone has been shut off, the headset will shut off automatically.

3

Using Your Headset

Function

Incoming Call

Answer a Calll

Answer a

Second Call

Button

(With headset already on)

--

Press MFB once to accept

Press “Hold and

Answer” button from your phone

Audio

(Headset)

4 Beeps, for every 2

seconds

--

--

Audio

(Ear piece)

Ringtone

“Di Do” tone once

Status

Indicator

Blue Light flashes simultaneously as the beep sound

Blue Light flashes once, every 6 seconds

--

Blue Light flashes once, every 6 seconds

Call Reject

Press the MFB twice

-“Di Do” tone once

Reject a second call directly on the other connected phone during the call.

Blue Light flashes once

End a Call

Press the MFB once

--

“Di Do” tone once

Blue Light flashes once

4

Using Your Headset

(cont’d)

Function

Voice Dialing

Button

(With headset already on)

Press the MFB once

Audio

(Headset)

--

Audio

(Speaker)

“Do” tone once

Status

Indicator

--

After you hear a short beep, say the voice tag, and you must have the voice tag record on your mobile phone.

Voice redialing is only allowed for those saved voice tag into the 1st connected phone if you have connected two mobile phones.

Last Number

Redial

Press the MFB twice

--

“Do” tone once

--

Redial the call from the 1st connected phone if two mobile phones are connected.

Reset/ Remove the pairing history

Press and hold the

MFB and Volume +

--

“Do Do” tone once

Out of range alert

--

2 beeps sound

Red light flashes once

“Di Do” tone

Blue light flashes

2 times for every 3 seconds

The headset will automatically reconnect within 5 minutes, otherwise it turn off. If auto-connect is not supported, press the MFB once.

5

Using Your Headset

(cont’d)

Function

Call Transfer

(from headset to vice versa)

Adjust Volume

Button

During a conversation, press the MFB twice

Audio

(Headset)

--

Press the Volume

+/- once to increase/ decrease by 1 level

(Total 8 levels)

--

Audio

(Speaker)

Status

Indicator

“Do” tone once

(both from headset to mobile phone/ or vice versa)

--

Blue light when a call is transferred from headset

--

--

--

Standby mode without mobile connection (No network covered)

--

Standby mode with mobile connection

----

Blue light

2 times for every

3

Blue light flashing 1 time for every

10 seconds

6

Troubleshooting

I cannot pair my headset with my mobile phone

- Ensure that your headset power is on and fully charged

- Ensure the Bluetooth® setting is activated within the settings of your phone

- Ensure the headset is in pairing mode (rapidly flashes blue and red alternately)

- Ensure the headset is not out of range of your phone

*If the above steps do not solve the problem, please turn off the headset, recharge the headset, and then try again.

I cannot hear the sound in my headset

- Ensure that your headset power is on and the unit is fully charged

- Ensure that your headset is paired and connected with your phone

- Ensure the conversation is not being transferred to your phone’s speaker

- Ensure the volume level is high enough to hear

I cannot turn off the headset

Please press and hold the MFB for a longer time, otherwise, please plug the headset into the charger for 2-3 seconds then disconnect the charger, the headset should now turn off.

I cannot turn on the headset

Ensure your headset power is on and fully charged, otherwise, please charge the headset for 1-1.5 hours, and then retry turning the device on.

7

Troubleshooting

(cont’d)

My phone cannot be automatically-reconnected with the headset

- Manually connect the headset from your mobile phone, as shown in manual

- Turn off the mobile phone and then turn it on again

- Turn off the headset and then turn it on again

*If the above steps do not solve the problem, turn off the headset and reset it, pairing the headset again.

Can I switch off the “Beep” Sound?

To guarantee the Anit- Lost functions properly, the “Beep” sound cannot be turned off

I hear a short “Beep” sound suddenly, what happened?

Never Forget Alarm is alerting you that your mobile phone is too far away.

I hear a “Beep” sound during the call, what happened?

Low battery alert please charge your headset.

I hear some noise during the call, why?

There is an obstruction between the headset and your mobile phone, please remove the obstruction.

8

Safety Precautions

1. Unintentional depression of the retractable button could result in injury from

the force of the earpiece cord retraction.

2. Be careful when retracting the ear bud cord. While retracting the cord,

maintain a safe distance between your face and the Halo Bluetooth device.

3. If you must use the headset while driving, ensure your attention is fully

focused on driving safety. Be a responsible driver and abide by the local

driving laws and regulations.

4. Small parts can be a choking hazard, please keep out of reach from children.

5. Obey all designated electronic restrictive areas (such as hospitals), that

require any electrical devices to be turned off.

6. Turn off your headset prior to take off, while on an airplane.

7. Do not attempt to disassemble the headset as it does not contain serviceable

components.

8. Headset is built with an internal battery and should be disposed of in

accordance to local regulations and not as a household waste.

19

Maintenance

1. Do not yank or forcibly pull the earphone cord.

2. Consider turning your headset off before placing it in your pocket or bag.

Accidently pushing MFB may result in placing an unintended call.

3. The Halo Bluetooth retractable device is not water proof, please do not

expose the headset to liquid or humidity.

4. Do not use abrasive cleaning solvents to clean the headset.

5. Do not expose the device to extremely high or low temperatures.

6. Do not expose your headset to contact with sharp objects as this may cause

scratches and/or damage.

7. Do not stick anything inside the headset as this may damage the internal

components.

8. Do not attempt to remove the battery within the device. It is built in and not

removable.

9. Use only the manufacturer supplied charger when charging the headset.

10. Do not disassemble the charger as it may expose you to dangerous voltage

or other risks. Incorrect reassembly may cause electric shock.

20

Declaration of Conformity

We, HALO2CLOUD, LLC, declare that the following product:

Product Name: HALO Retractable Bluetooth Headset

Model No.: HABL-2

FCC Compliance Statement

(2)This device must accept any interference received, including interference part responsible for compliance could void the user’s authority to operate the

21

15.105(b)

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

FCC Compliance Statement

(cont’d)

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver

* Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

22

Limited Warranty

HALO2CLOUD, LLC warrants its products to be free from defects in material and workmanship under normal use. Conditions are as follows:

- During the first one year from date of purchase, HALO2CLOUD, LLC will repair or replace the defective product.

- HALO2CLOUD, LLC will, subject to inspection, repair the defective product or replace it with a new or reconditioned unit. The return must be accompanied by a

Return Materials Authorization (RMA) number to be issued upon request, and must be shipped prepaid. A shipping rebate will only be extended to the customer in the event that a defect in material or workmanship is confirmed.

- Warranty is void if the product has been improperly handled or misused in any way, or if the label and/or bar-coded warranty label has been removed or tampered with.

- Warranty returns require a check for $14.95 for processing and handling made payable to HALO2CLOUD, LLC.

- Where applicable, all requests for warranty returns must be accompanied by a proof of purchase and be sent to HALO2CLOUD, LLC (www.halo2cloud.com).

-The warranty does not extend to the electronic equipment that is used or which incorporates with any of our products and accessories. HALO2CLOUD, LLC shall not be held responsible for the improper use of its products.

23

For any questions please contact our support team at: [email protected]

OR

888-907-6274